Li-air Battery with a Superhydrophobic Li-Protective Layer

Superhydrophobic Surface by Laser Ablation of PDMS

Superhydrophobic surfaces have important applications in generating anti-icing properties, preventing corrosion, producing anti-biofouling characteristics, and microfluidic devices. One of the most commonly used materials to make superhydrophobic surfaces is poly(dimethylsiloxane) (PDMS). Various techniques, including spin-coating, dip-coating, spray coating, surface etching, and laser-textured mold methods, have been used to make superhydrophobic surfaces. However, all these methods require several steps, the usage of multiple chemicals, and/or surface modifications. In this paper, a one-step, low-cost method to induce superhydrophobicity is described. This was done by the pulsed laser deposition of laser-ablated PDMS micro/nanoparticles, and the method applies to a variety of surfaces. This technique has been demonstrated on three important classes of material─glass, poly(methyl methacrylate) (PMMA), and aluminum. Water contact angles of greater than 150° and roll-off angles of less than 3° were obtained. Optical transmission value of as high as 90% was obtained on glass or PMMA coated with laser-ablated PDMS micro/nanoparticles. Furthermore, this method can also be used to make micron-scale patterned superhydrophobic PDMS surfaces. This would have potential applications in microfluidic microchannels and other optical devices.

Highly Stable Garnet Fe2 Mo3 O12 Cathode Boosts the Lithium-Air Battery Performance Featuring a Polyhedral Framework and Cationic Vacancy Concentrated Surface

Lithium-air batteries (LABs), owing to their ultrahigh theoretical energy density, are recognized as one of the next-generation energy storage techniques. However, it remains a tricky problem to find highly active cathode catalyst operating within ambient air. In this contribution, a highly active Fe₂ Mo₃ O₁₂ (FeMoO) garnet cathode catalyst for LABs is reported. The experimental and theoretical analysis demonstrate that the highly stable polyhedral framework, composed of FeO octahedrons and MO tetrahedrons, provides a highly effective air catalytic activity and long-term stability, and meanwhile keeps good structural stability. The FeMoO electrode delivers a cycle life of over 1800 h by applying a simple half-sealed condition in ambient air. It is found that surface-rich Fe vacancy can act as an O₂ pump to accelerate the catalytic reaction. Furthermore, the FeMoO catalyst exhibits a superior catalytic capability for the decomposition of Li₂ CO₃ . H₂ O in the air can be regarded as the main contribution to the anode corrosion and the deterioration of LAB cells could be attributed to the formation of LiOH·H₂ O at the end of cycling. The present work provides in-depth insights to understand the catalytic mechanism in air and constitutes a conceptual breakthrough in catalyst design for efficient cell structure in practical LABs.

CO2 Capture Membrane for Long-Cycle Lithium-Air Battery

Lithium-air batteries (LABs) have attracted extensive attention due to their ultra-high energy density. At present, most LABs are operated in pure oxygen (O₂) since carbon dioxide (CO₂) under ambient air will participate in the battery reaction and generate an irreversible by-product of lithium carbonate (Li₂CO₃), which will seriously affect the performance of the battery. Here, to solve this problem, we propose to prepare a CO₂ capture membrane (CCM) by loading activated carbon encapsulated with lithium hydroxide (LiOH@AC) onto activated carbon fiber felt (ACFF). The effect of the LiOH@AC loading amount on ACFF has been carefully investigated, and CCM has an ultra-high CO₂ adsorption performance (137 cm³ g^-1) and excellent O₂ transmission performance by loading 80 wt% LiOH@AC onto ACFF. The optimized CCM is further applied as a paster on the outside of the LAB. As a result, the specific capacity performance of LAB displays a sharp increase from 27,948 to 36,252 mAh g^-1, and the cycle time is extended from 220 h to 310 h operating in a 4% CO₂ concentration environment. The concept of carbon capture paster opens a simple and direct way for LABs operating in the atmosphere.

Research progress on eco-friendly superhydrophobic materials in environment, energy and biology

In the past few years, bioinspired eco-friendly superhydrophobic materials (EFSMs) have made great breakthroughs, especially in the fields of environment, energy and biology, which have made remarkable contributions to the sustainable development of the natural environment. However, some potential challenges still exist, which urgently need to be systematically summarized to guide the future development of this field. Herein, in this review, initially, we discuss the five typical superhydrophobic models, namely, the Wenzel, Cassie, Wenzel-Cassie, "lotus", and "gecko" models. Then, the existence of superhydrophobic creatures in nature and artificial EFSMs are summarized. Then, we focus on the applications of EFSMs in the fields of environment (self-cleaning, wastewater purification, and membrane distillation), energy (solar evaporation, heat accumulation, and batteries), and biology (biosensors, biomedicine, antibacterial, and food packaging). Finally, the challenges and developments of eco-friendly superhydrophobic materials are highlighted.

Transferring Liquid Metal to form a Hybrid Solid Electrolyte via a Wettability-Tuning Technology for Lithium-Metal Anodes

Integrating solid-state electrolyte (SSE) into Li-metal anodes has demonstrated great promise to unleash the high energy density of rechargeable Li-metal batteries. However, fabricating a highly cyclable SSE/Li-metal anode remains a major challenge because the densification of the SSE is usually incompatible with the reactive Li metal. Here, a liquid-metal-derived hybrid solid electrolyte (HSE) is proposed, and a facile transfer technology to construct an artificial HSE on the Li metal is reported. By tuning the wettability of the transfer substrates, electron- and ion-conductive liquid metal is sandwiched between electron-insulating and ion-conductive LiF and oxides to form the HSE. The transfer technology renders the HSE continuous, dense, and uniform. The HSE, having high ion transport, electron shut-off, and mechanical strength, makes the composite anode deliver excellent cyclability for over 4000 h at 0.5 mA cm^-2 and 1 mAh cm^-2 in a symmetrical cell. When pairing with LiFePO₄ and sulfur cathodes, the HSE-coated Li metal dramatically enhances the performance of full cells. Therefore, this work demonstrates that tuning the interfacial wetting properties provides an alternate approach to build a robust solid electrolyte, which enables highly efficient Li-metal anodes.

Strategies toward anode stabilization in nonaqueous alkali metal-oxygen batteries

Alkali metal-O2 batteries exhibit ultra-high theoretical energy density which is even on a par with to fossil energy and expected to become the next generation of energy storage devices. However,...

Growing Nanostructured CuO on Copper Foil via Chemical Etching to Upgrade Metallic Lithium Anode

Metallic lithium is one of the most promising anode materials to build next generation electrochemical power sources such as Li-air, Li-sulfur, and solid-state lithium batteries. The implementation of rechargeable Li-based batteries is plagued by issues including dendrites, pulverization, and an unstable solid electrolyte interface (SEI). Herein, we report the use of nanostructured CuO in situ grown on commercial copper foil (CuO@Cu) via chemical etching as a Li-reservoir substrate to stabilize SEI formation and Li stripping/plating. The lithiophilic interconnected CuO layer enhances electrolyte wettability. Besides, a mechanically stable Li₂O- and LiF-rich SEI is generated on CuO@Cu during initial discharge, which permits dense and uniform lithium deposition upon subsequent cycling. Compared with bare Cu, the CuO@Cu electrode exhibits superior performance in terms of Coulombic efficiency, discharge/charge overpotentials, and cyclability. By pairing with the Li-CuO@Cu anodes, full cells with LiFePO₄ and LiNi_1/3Mn_1/3Co_1/3O₂ cathodes sustain 300 cycles with 98.8% capacity retention at 1 C and deliver a specific capacity of 80 mAh g^-1 at 10 C, respectively. This work would shed light on the design of advanced current collectors with SEI modulation to upgrade lithium anodes.