Nanocage-Based InIII{TbIII}2-Organic Framework Featuring Lotus-Shaped Channels for Highly Efficient CO2 Fixation and I2 Capture

Defect-engineered indium-organic framework displays the higher CO2 adsorption and more excellent catalytic performance on the cycloaddition of CO2 with epoxides under mild conditions

In order to achieve the high adsorption and catalytic performance of CO2, the direct self-assembly of robust defect-engineered MOFs is a scarcely reported and challenging proposition. Herein, a highly robust nanoporous indium(III)-organic framework of {[In2(CPPDA)(H2O)3](NO3)·2DMF·3H2O}n (NUC-107) consisting of two kinds of inorganic units of chain-shaped [In(COO)2(H2O)]n and watery binuclear [In2(COO)4(H2O)8] was generated by regulating the growth environment. It is worth mentioning that [In2(COO)4(H2O)8] is very rare in terms of its richer associated water molecules, implying that defect-enriched metal ions in the activated host framework can serve as strong Lewis acid. Compared to reported skeleton of [In4(CPPDA)2(μ3-OH)2(DMF)(H2O)2]n (NUC-66) with tetranuclear clusters of [In4(μ3-OH)2(COO)10(DMF)(H2O)2] as nodes, the void volume of NUC-107 (50.7%) is slightly lower than the one of NUC-66 (52.8%). However, each In3+ ion in NUC-107 has an average of 1.5 coordinated small molecules (H2O), which far exceeds the average of 0.75 in NUC-66 (H2O and DMF). After thermal activation, NUC-107a characterizes the merits of unsaturated In3+ sites, free pyridine moieties, solvent-free nanochannels (10.2 × 15.7 Å2). Adsorption tests prove that the host framework of NUC-107a has a higher CO2 adsorption (113.2 cm3/g at 273 K and 64.8 cm3/g at 298 K) than NUC-66 (91.2 cm3/g at 273 K and 53.0 cm3/g at 298 K). Catalytic experiments confirmed that activated NUC-107a with the aid of n-Bu4NBr was capable of efficiently catalyzing the cycloaddition of CO2 with epoxides into corresponding cyclic carbonates under the mild conditions. Under the similar conditions of 0.10 mol% MOFs, 0.5 mol% n-Bu4NBr, 0.5 MP CO2, 60 °C and 3 h, compared with NUC-66a, the conversion of SO to SC catalyzed by NUC-107a increased by 21%. Hence, this work offers a valuable perspective that the in situ creation of robust defect-engineered MOFs can be realized by regulating the growth environment.

Self-template impregnated silver nanoparticles in coordination polymer gel: photocatalytic CO2 reduction, CO2 fixation, and antibacterial activity

CO2 fixation and light-assisted conversion of CO2 in the presence of water into fuels and feedstocks are clean and sustainable techniques to alleviate the energy crisis and global climate change. In this regard, herein, a waterborne multifunctional metal-organic coordination polymer gel (Ag@GMP) was prepared from silver nitrate and guanosine 5'-monophosphate. Electron microscopy exhibits that Ag@GMP has a flower-like structure, which is composed of vertically grown sheets, and corresponding high magnification images display the presence of silver nanoparticles on the vertically grown sheets. Ag@GMP demonstrates remarkable photocatalytic performance, achieving a CO2 conversion rate of 18.6 μmol g-1 with approximately 85% selectivity towards CO at ambient temperature without using sacrificial agents. In situ diffuse reflectance infrared Fourier transform spectroscopy was employed to elucidate the proposed mechanism for photocatalytic CO2 reduction. Additionally, Ag@GMP exhibits significant catalytic activity in the fixation of CO2 with epoxides, leading to the formation of valuable chemicals under atmospheric pressure. Ag@GMP demonstrated efficient antibacterial activity against both Gram-negative and Gram-positive bacteria. The highest zone of inhibition was observed against S. aureus MTCC 3160 (15.83 ± 1.1 mm), and for E. coli, P. aeruginosa PAO1, and B. subtilis, it was found to be 12.66 ± 0.9, 14.33 ± 0.8 and 12.8 ± 0.8 mm, respectively.

Synthesis and Fluorescent Characteristics Study of Two Novel Co(II) Complexes

In this work, two novel mixed-ligand CPs that has a compositions of [Co2(µ-Hdppa)2(phen)2(H2O)2] (1) and {[Co(µ-Hdppa)(µ-4,4'-bipy)(H2O)]·H2O}n (2) is achieved through reaction of cobalt salts with the 5-(3,4-Dicarboxylphenyl)picolinic acid (H3dppa) with various N-donor co-ligands (1,10-phenanthroline (phen) for 1 and 4,4'-bipyridine (4,4'-bipy) for 2). The structures and characteristics of these two complexes were fully examined via IR, TGA, and SXRD. Furthermore, their superior blue fluorescence properties compared to the original ligands were confirmed through fluorescence spectroscopy. These two complexes prepared in this study have enriched the choices for blue fluorescent materials.

Application Values of Two Cu(II) Schiff Base Coordination Complexes on Blue Fluorescent Materials

Two Schiff base binuclear Cu(II) compounds, [Cu2(L)2·(H2O)2]·2DMF (1) together with its coordination polymer (CP) [Cu2(L)2·(4,4'-bpy)2]n (2) (H2L is 4-hydroxy-3-((2-hydroxy-5-mercaptobenzylidene)amino)-2H-chromen-2-one and 4,4'-bpy is 4,4'-bipyridine), were generated under an identical experimental environment in the absence and existence of auxiliary ligand 4,4'-bpy. Fluorescence spectroscopy testing shows that the ligand-based blue fluorescence emission offers potential for application as a blue photoluminescent material.

Robust {Pb10}-Cluster-Based Metal-Organic Framework for Capturing and Converting CO2 into Cyclic Carbonates under Mild Conditions

Developing a highly active catalyst that can efficiently capture and convert carbon dioxide (CO2) into high-value-added energy materials remains a severe challenge, which inspires us to explore effective metal-organic frameworks (MOFs) with high chemical stability and high-density active sites. Herein, we report a robust 3D lead(II)-organic framework of {(Me2NH2)2[Pb5(PTTPA)2(H2O)3]·2DMF·3H2O}n (NUC-111) with unreported [Pb10(COO)22(H2O)6] clusters (abbreviated as {Pb10}) as nodes (H6PTTPA = 4,4',4″-(pyridine-2,4,6-triyl)triisophthalic acid). After thermal activation, NUC-111a is functionalized by the multifarious symbiotic acid-base active sites of open Pb2+ sites and uncoordinated pyridine groups on the inner surface of the void volume. Gas adsorption tests confirm that NUC-111a displays a higher separation performance for mixed gases of f CO2 and CH4 with the selectivity of CO2/CH4 at 273 K and 101 kPa being 31 (1:99, v/v), 23 (15:85, v/v), and 8 (50:50, v/v), respectively. When the temperature rises to 298 K, the selectivity of CO2/CH4 at 101 kPa is 26 (1:99, v/v), 22 (15:85, v/v), and 11 (50:50, v/v). Moreover, activated NUC-111a exhibited excellent catalytic performance, stability, and recyclability for the cycloaddition of CO2 with epoxides under mild conditions. Hence, this work provides valuable insight into designing MOFs with multifunctionality for CO2 capture, separation, and conversion.

Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2. This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

Fabrication of bimetallic-doped materials derived from a Cu-based complex for enhanced dye adsorption and iodine capture

In this work, we used Cu(II) ions, a bis-pyridyl-bis-amide ligand [N,N'-bis(4-pyridinecarboxamide)-1,2-cyclohexane (4-bpah)], and an aromatic dicarboxylic acid [1,4-cyclohexanedicarboxylic acid (H2CHDA)] to construct a 1D binuclear Cu-based complex, namely {[Cu3(4-bpah)(CHDA)3(H2O)]·2H2O}n (1). Moreover, we also developed a facile method to synthesize two monometallic/bimetallic-doped materials which were derived from the Cu complex (C-N-1 and C-V-1, which were doped with nitrogen and vanadium, respectively). The as-synthesized derived materials were fully characterized and the iodine sorption/release capabilities were investigated in detail. We performed iodine adsorption experiments on the two monometallic/bimetallic-doped materials and found that C-N-1 and C-V-1 possess highly efficient adsorption activities for the adsorption of iodine from solution. The C-N-1 and C-V-1 complexes exhibited remarkable adsorption capacities of 1141.60 and 1170.70 mg g-1, respectively, for iodine from a cyclohexane solution. Moreover, the dye adsorption properties of C-N-1 and C-V-1 were also investigated in detail. The obtained C-N-1 and C-V-1 exhibit effective dye uptake performances in water solution. The adsorption of Congo red (CR) on a single metal carbon material C-N-1 doped with heteroatoms reached equilibrium within 240 min and reached an adsorption capacity of 1357.00 mg g-1 and the adsorption capacities of C-V-1 for methylene blue (MB), gentian violet (GV), rhodamine B (RhB), and CR at room temperature were found to be 187.60, 190.60 and 108.10 and 1501.00 mg g-1 in 180 min, respectively. By comparison, we found that doping vanadium could play an important role in the adsorption processes. The adsorption capacity of C-V-1 (containing the vanadium in its structure) was relatively higher than that of C-N-1, which indicated that the introduction of non-noble metals may effectively tune the adsorption kinetics activity and the introduction of noble metals can change the surface electronegativity of porous carbon materials, thus leading to significantly improved adsorption capabilities.

Iodine Molecules within Triethylenediamine-Based Metal-Organic Frameworks for Hydrolysis/Alkylation Tandem Reactions

The integration of radionuclide iodine molecules in metal-organic frameworks (MOFs) for organic synthesis is attracting considerable research attention due to their specific catalytic performance. However, understanding the comprehensive catalytic behaviors of different types of molecular iodine encapsulated in MOFs for a sequential organic transformation is a great challenge. To address this issue, we have designed two triethylenediamine-functionalized MOFs assembled from 1,3,5-tricarboxyphenyl-2-(triethylenediaminemethyl)benzene-linker and {Cd(COO)3N} or {Cu4(u3-OH)2(COO)6N} clusters. Both MOFs show good stability and adsorption of I2 in the solution and vapor phases. Catalysts obtained after treatment with ethyl acetate present efficient catalytic activity in hydrolysis/alkylation tandem reactions in water. The mechanistic investigations disclose a sequential catalytic process comprising a "hidden" Brønsted acid catalytic hydrolysis of acetals to aldehydes followed by the I2-bonding Lewis acid catalytic alkylation of aldehydes to 3,3'-disubstituted 1H-indoles.

A robust and porous titanium metal-organic framework for gas adsorption, CO2 capture and conversion

A robust and porous titanium metal-organic framework (Ti-MOF; LCU-402) has been hydrothermally synthesized through combining a tetranuclear Ti2Ca2(μ3-O)2(μ2-H2O)1.3(H2O)4(O2C-)8 cluster and a tritopic 1,3,5-benzene(tris)benzoic (BTB) ligand. LCU-402 shows remarkable stability and permanent porosity for CO2, CH4, C2H2, C2H4, and C2H6 gas adsorption. Moreover, LCU-402 as a heterogeneous catalyst can smoothly convert CO2 under a simulated flue atmosphere into organic carbonate molecules by cycloaddition reactions of CO2 and epoxides, indicating that LCU-402 might be a promising catalyst candidate in practical applications. We are confident that the identification of a persistent titanium-oxo building unit would accelerate the development of new porous Ti-MOF materials.

Exploiting a Multi-Responsive Oxadiazole Moiety in One Three-Dimensional Metal-Organic Framework for Remedies to Three Environmental Issues

Multifunctional metal-organic frameworks (MOFs) rely on the properties of metal centers (nodes) and/or linkers (struts) for their diverse applications in the emerging field of research. Currently, there is a huge demand for MOF materials in the field of capture/fixation/sensing of air pollutants, harmful chemical effluents, and nuclear waste. However, it is a challenging task to utilize one MOF for providing remedies to all these issues. On the basis of our current research activities, we have identified that an oxadiazole moiety-a five-membered ring with two different heteroatoms (O and N)-in a carboxylate linker can be the key to generating such MOF materials for its (a) inherent polarizable nature and molecular docking ability and (b) photoluminescence properties. In this work, we report a 3D MOF {[Co₂(oxdz)₂(tpbn)(H₂O)₂]·4H₂O}_n (1), self-assembled at room temperature from a three-component reaction, with an oxadiazole moiety (where H₂oxdz = 4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoic acid and tpbn = N,N',N,"N″'-tetrakis(2-pyridylmethyl)-1,4-diaminobutane). The inherent polarizable nature of the oxadiazole moiety in 1 has been efficiently exploited for (i) multimedia iodine capture and (ii) fixation of CO₂ under solvent-free and ambient conditions. On the other hand, the luminescent nature of the framework is found to be an efficient, highly preferred turn-on sensor for the ultra-fast detection of ketones with a limit as low as parts-per-trillion (mesitylene oxide: 447 ppt; cycloheptanone: 4.7 ppb; cyclohexanone: 17.2 ppb; acetylacetone: 18 ppb).

Cluster-Based Crystalline Materials for Iodine Capture

The treatment of radioactive iodine in nuclear waste has always been a critical issue of social concern. The rational design of targeted and efficient capture materials is of great significance to the sustainable development of the ecological environment. In recent decades, crystalline materials have served as a molecular platform to study the binding process and capture mechanism of iodine molecules, enabling people to understand the interaction between radioactive iodine guests and pores intuitively. Cluster-based crystalline materials, including molecular clusters and cluster-based metal-organic frameworks, are emerging candidates for iodine capture due to their aggregative binding sites, precise structural information, tunable pores/packing patterns, and abundant modifications. Herein, recent progress of different types of cluster materials and cluster-dominated metal-organic porous materials for iodine capture is reviewed. Research prospects, design strategies to improve the affinity for iodine and possible capture mechanisms are discussed.

Fluorine-Functionalized NbO-Type {Cu2}-Organic Framework: Enhanced Catalytic Performance on the Cycloaddition Reaction of CO2 with Epoxides and Deacetalization-Knoevenagel Condensation

The high catalytic activity of metal-organic frameworks (MOFs) can be realized by increasing their effective active sites, which prompts us to perform the functionalization on selected linkers by introducing a strong Lewis basic group of fluorine. Herein, the exquisite combination of paddle-wheel [Cu₂(CO₂)₄(H₂O)] clusters and meticulously designed fluorine-funtionalized tetratopic 2',3'-difluoro-[p-terphenyl]-3,3″,5,5″-tetracarboxylic acid (F-H₄ptta) engenders one peculiar nanocaged {Cu₂}-organic framework of {[Cu₂(F-ptta)(H₂O)₂]·5DMF·2H₂O}_n (NUC-54), which features two types of nanocaged voids (9.8 Å × 17.2 Å and 10.1 Å × 12.4 Å) shaped by 12 paddle-wheel [Cu₂(COO)₄H₂O)₂] secondary building units, leaving a calculated solvent-accessible void volume of 60.6%. Because of the introduction of plentifully Lewis base sites of fluorine groups, activated NUC-54a exhibits excellent catalytic performance on the cycloaddition reaction of CO₂ with various epoxides under mild conditions. Moreover, to expand the catalytic scope, the deacetalization-Knoevenagel condensation reactions of benzaldehyde dimethyl acetal and malononitrile were performed using the heterogenous catalyst of NUC-54a. Also, NUC-54a features high recyclability and catalytic stability with excellent catalytic performance in subsequent catalytic tests. Therefore, this work not only puts forward a new solution for developing high-efficiency heterogeneous catalysts, but also enriches the functionalization strategies for nanoporous MOFs.

Topologically Driven Pore/Surface Engineering in a Recyclable Microporous Metal-Organic Vessel Decorated with Hydrogen-Bond Acceptors for Solvent-Free Heterogeneous Catalysis

The use of metal-organic frameworks (MOFs) comprising custom-designed linkers/ligands as efficient and recyclable heterogeneous catalysts is on the rise. However, the topologically driven bifunctional porous MOFs for showcasing a synergistic effect of two distinct activation pathways of substrates (e.g., involving hydrogen bonding and a Lewis acid) in multicomponent organic transformations are very challenging. In particular, the novelty of such studies lies in the proper pore and/or surface engineering in MOFs for bringing the substrates in close proximity to understand the mechanistic aspects at the molecular level. This work represents the topological design, solid-state structural characterization, and catalytic behavior of an oxadiazole tetracarboxylate-based microporous three-dimensional (3D) metal-organic framework (MOF), {[Zn₂(oxdia)(4,4'-bpy)₂]·8.5H₂O}_n (1), where the tetrapodal (4-connected) 5,5'-(1,3,4-oxadiazole-2,5-diyl)diisophthalate (oxdia^4-), the tetrahedral metal vertex (Zn(II)), and a 2-connected pillar linker 4,4'-bipyridine (4,4'-bpy) are unique in their roles for the formation, stability, and function. As a proof of concept, the efficient utilization of both the oxadiazole moiety with an ability to provide H-bond acceptors and the coordinatively unsaturated Zn(II) centers in 1 is demonstrated for the catalytic process of the one-pot multicomponent Biginelli reaction under mild conditions and without a solvent. The key steps of substrate binding with the oxadiazole moiety are ascertained by a fluorescence experiment, demonstrating a decrease or increase in the emission intensity upon interaction with the substrates. Furthermore, the inherent polarizability of the oxadiazole moiety is exploited for CO₂ capture and its size-selective chemical fixation to cyclic carbonates at room temperature and under solvent-free conditions. For both catalytic processes, the chemical stability, structural integrity, heterogeneity, versatility in terms of substrate scope, and mechanistic insights are discussed. Interestingly, the first catalytic process occurs on the surface, while the second reaction occurs inside the pore. This study opens new ways to catalyze different organic transformation reactions by utilizing this docking strategy to bring the multiple components close together by a microporous MOF.

Heterometallic Metal-Organic Framework Based on [Cu4I4] and [Hf6O8] Clusters for Adsorption of Iodine

Heterometallic metal-organic framework (MOF) as a kind of porous material is very important because of its excellent properties in catalysis, magnetic, sensor, and adsorption fields, but the reasonable design and syntheses of these are still challenging. Herein, we prepared one heterometallic MOF with the formula [Hf₆(μ₃-OH)₈(OH)₈][(Cu₄I₄) (ina)₄]₂·22DMF (NS-1, ina = isonicotinate). Single-crystal X-ray diffraction analysis revealed that NS-1 is a three-dimensional network with flu topology, constructed from 8-connected [Hf₆(μ₃-OH)₈(OH)₈]⁸⁺ and 4-connected [Cu₄I₄] clusters as second building units (SBUs). To our best knowledge, NS-1 is a rare example with two different metal clusters as SBUs in heterometallic Hf-based MOFs. Interestingly, NS-1 exhibits a reversible adsorption performance for iodine in the cyclohexane solution, the adsorption kinetics fits well with the pseudo-second-order equation, and the Freundlich model relating to multilayer adsorption better describes the process of iodine absorption.

A new Cu(II)-containing coordination polymer: protective effect and mechanism exploration on elderly osteoporotic hip fractures via regulating the wnt signaling pathway

Elderly osteoporosis hip fracture has drawn the attention of the researcher. The coordination polymer was now widely used in clinic because their multiple structures and biological activities. In this present research, the new coordination polymer was designed and synthesized and their application values on elderly osteoporosis hip were evaluated. The reaction between Cu(II) salt and 4,4'-(1H-1,2,4-triazol-1-yl)methylene-bis(benzoic acid) (H2tzmb), an aromatase inhibitor letrozole derivative with the aid of the organic linker 4,4-bipyridine (4,4'-bpy) affords a new coordination polymer based on Cu(II) ions as nodes of {[Cu2(tzmb)2(4,4'-bpy) (μ2-H2O)2(DMA) (H2O)2]·10DMA}n (1). The complex 1 gained is totally investigated with the powder X-ray diffraction study, thermogravimetric analyses, the diffraction of single-crystal X-ray, elemental analysis as well as the Fourier transform infrared spectrometer spectra. The osteogenic differentiation of mesenchymal stem cell was measured with the western blotting assay through determining the Runx2 expression. The wnt signaling pathway relative expression in mesenchymal stem cell was detected through the determination of real-time RT-PCR. The cytotoxicity of the compound on the mesenchymal stem cell was determined with CCK-8 assay. The result of single-crystal X-ray diffraction reflects that the complex 1 has crystallized in space group R-3c of trigonal system and exhibits a three-dimensional skeleton architecture on the bases of the SBUs {Cu(tzmb)(μ2-H2O)}n. The western blotting assay results revealed that this compound could significantly promote the osteogenic differentiation of mesenchymal stem cell. Besides, the activation of wnt signaling pathway in mesenchymal stem cell was also increased by the compound exposure. Finally, it can be summed up that this compound has excellent application values on the elderly osteoporotic hip fractures treatment by increasing the activation of wnt signaling pathway in mesenchymal stem cell. The results of the CCK-8 assay indicated that the compound has no cytotoxicity on the mesenchymal stem cell. The molecular docking simulation results have identified that only the carboxyl group on the Cu complex exhibits the activity for the hydrogen bond formation, however, the pyridine ring does not have such activity, instead, the pyridine ring only acts as the ligand that binds to the Cu ion. This Cu(II) coordination polymer has excellent application values on the elderly osteoporotic hip fractures treatment by increasing the activation of wnt signaling pathway in mesenchymal stem cell.

A layered Mn-based coordination polymer as an efficient heterogeneous catalyst for CO2 cycloaddition under mild conditions

A layered coordination polymer has been constructed by using a semi-rigid ligand, exhibiting a robust catalytic activity toward the cycloaddition of CO2 with epoxides.

Investigation on the catalytic behavior of a novel thulium-organic framework with a planar tetranuclear {Tm4} cluster as the active center for chemical CO2 fixation

Herein, the exquisite combination of coplanar [Tm₄(CO₂)₁₀(μ₃-OH)₂(μ₂-HCO₂)(OH₂)₂] clusters ({Tm₄}) and structure-oriented functional BDCP^5- leads to the highly robust nanoporous {Tm₄}-organic framework {(Me₂NH₂)[Tm₄(BDCP)₂(μ₃-OH)₂(μ₂-HCO₂)(H₂O)₂]·7DMF·5H₂O}_n (NUC-37, H₅BDCP = 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine). To the best of our knowledge, NUC-37 is the first anionic {Ln₄}-based three-dimensional framework with embedded hierarchical microporous and nanoporous channels, among which each larger one is shaped by six rows of coplanar {Tm₄} clusters and characterized by plentiful coexisting Lewis acid-base sites on the inner wall including open Tm^III sites, N_pyridine atoms, μ₃-OH and μ₂-HCO₂. Catalytic experimental studies exhibit that NUC-37 possesses highly selective catalytic activity on the cycloaddition of epoxides with CO₂ as well as high recyclability under gentle conditions, which should be ascribed to its nanoscale channels, rich bifunctional active sites, and stable physicochemical properties. This work offers an effective means for synthesizing productive cluster-based Ln-MOF catalysts by employing structure-oriented ligands and controlling the solvothermal reaction conditions.

Intrinsic-Unsaturation-Enriched Biporous and Chemorobust Cu(II) Framework for Efficient Catalytic CO2 Fixation and Pore-Fitting Actuated Size-Exclusive Hantzsch Condensation with Mechanistic Validation

Carbon dioxide (CO₂) utilization and one-pot Hantzsch condensation denote two important protocols pertinent to sustainable agenda because of the obvious advantages like reduction in chemical usage, short reaction time, and minimum waste generation. To this end, the astute combination of optimum-sized pore structure with built-in Lewis acid center in metal-organic frameworks (MOFs) can bring about such reactions under energetically favorable conditions and offer a step forward to size-exclusive catalysis. The chemoresistant and twofold interpenetrated Cu(II) framework CSMCRI-13 (CSMCRI = Central Salt & Marine Chemicals Research Institute) is built from a C₃-symmetric tricarboxylate ligand and an N,N'-donor linker that undergo incisive amalgamation of the paddle-wheel [Cu₂(COO)₄] secondary building unit (SBU) and the intrinsically unsaturated Cu(II) node with four coordination. The microporous structure features a dual-pore containing cage-like network with free oxygen-atom-enriched cavities and exhibits appreciable CO₂ adsorption with moderate MOF-CO₂ interaction in activated form (13a). Benefitting from both, the coordinatively frustrated metal center containing MOF acts as a highly synergistic and solvent-free catalyst in CO₂ cycloaddition reaction under an 8 bar CO₂ pressure at 70 °C in 6 h. The catalyst furnished admirable reactivity and fair recyclability with a wide range of substrates, wherein sterically encumbered and long-chain epoxides produced poor conversion. This MOF further executes highly regenerable Hantzsch condensation reaction under mild condition with superior activity to contemporary materials, where most of the 1,4-dihydropyridine derivatives are additionally characterized through the single-crystal X-ray diffraction analysis. Importantly, mechanistic proof of the tricomponent condensation involving built-in Lewis acid sites is validated from several control experiments and in-depth analytical studies. To the best of the single-step multicomponent reaction, substrate molecules having incompatible molecular dimension to that of pore size of the framework resulted insignificant conversion and demonstrated the first-ever pore-fitting-induced size selectivity in Hantzsch condensation.

Indium-Organic Framework with soc Topology as a Versatile Catalyst for Highly Efficient One-Pot Strecker Synthesis of α-aminonitriles

An In(III) based metal-organic framework (MOF), In-pbpta, with soc topology was constructed from the trigonal prismatic [In3(μ3-O)(H2O)3(O2C-)6] secondary building unit (SBU) and a custom-designed tetratopic linker H4pbpta (pbpta = 4,4',4″,4‴-(1,4-phenylenbis(pyridine-4,2,6-triyl))-tetrabenzoic acid)). The obtained MOF shows a Brunauer-Emmett-Teller surface area of 1341 m2/g with a pore volume of 0.64 cm3/g, which is the highest among the scarcely reported In-soc-MOFs. The constructed MOF demonstrates excellent performance as a heterogeneous Lewis acid catalyst for highly efficient conversion in a one-pot multicomponent Strecker reaction for the preparation of α-aminonitriles under solvent-free conditions, which can be easy to separate and recycle without significant loss of activity for up to seven cycles. The computational modeling studies suggest the presence of the three substrates in close vicinity to the In-oxo cluster. The strong interactions of the aldehyde/ketone and the amine with the In-oxo cluster together with the readily available cyanide ion around the In-oxo cluster lead to high catalytic conversion within a short period of time for the MOF catalyst. Our work therefore lays a foundation to develop MOF as a new class of efficient heterogeneous catalyst for one-pot Strecker reaction.

Nanochannel {InZn}-Organic Framework with a High Catalytic Performance on CO2 Chemical Fixation and Deacetalization-Knoevenagel Condensation

The rare combination of In^III 5p and Zn^II 3d in the presence of a structure-oriented TDP^6- ligand led to a robust hybrid material of {(Me₂NH₂)[InZn(TDP)(OH₂)]·4DMF·4H₂O}_n (NUC-42) with the interlaced hierarchical nanochannels (hexagonal and cylindrical) shaped by six rows of undocumented [InZn(CO₂)₆(OH₂)] clusters, which represented the first 5p-3d nanochannel-based heterometallic metal-organic framework. With respect to the multifarious symbiotic Lewis acid-base and Brønsted acid sites in the high porous framework, the catalytic performance of activated NUC-42a upon CO₂ cycloaddition with styrene oxide was evaluated under solvent-free conditions with 1 atm of CO₂ pressure, which exhibited that the reaction could be well completed at ambient temperature within 48 h or at 60 °C within 4 h with high yield and selectivity. Moreover, because of the acidic function of metal sites and a central free pyridine in the TDP^6- ligand, deacetalization-Knoevenagel condensation of acetals and malononitrile could be efficiently facilitated by an activated sample of NUC-42a under lukewarm conditions.

A Facile Strategy for Constructing a Carbon-Particle-Modified Metal-Organic Framework for Enhancing the Efficiency of CO2 Electroreduction into Formate

Electrocatalytic reduction of CO₂ by metal-organic frameworks (MOFs) has been widely investigated, but insufficient conductivity limits application. Herein, a porous 3D In-MOF {(Me₂ NH₂ )[In(BCP)]⋅2 DMF}_n (V11) with good stability was constructed with two types of channels (1.6 and 1.2 nm diameter). V11 exhibits moderate catalytic activity in CO₂ electroreduction with 76.0 % of Faradaic efficiency for formate (FE_HCOO- ). Methylene blue molecules of suitable size and pyrolysis temperature were introduced and transformed into carbon particles (CPs) after calcination. The performance of the obtained CPs@V11 is significantly improved both in FE_HCOO- (from 76.0 % to 90.1 %) and current density (2.2 times). Control experiments show that introduced CPs serve as accelerant to promote the charges and mass transfer in framework, and benefit to sufficiently expose active sites. This strategy can also work on other In-MOFs, demonstrating the universality of this method for electroreduction of CO₂ .