Flexible MXene/Silver Nanowire-Based Transparent Conductive Film with Electromagnetic Interference Shielding and Electro-Photo-Thermal Performance

Supramolecular room-temperature flowable lignin (RTFL)/MXene for sustainable coatings

Thermoelectric coatings with high biomass content, excellent storage stability, and solvent-free curing capabilities are highly desirable yet challenging. In this study, we demonstrate that supramolecular room-temperature flowable lignin (RTFL) was introduced as an effective carrier for the two-dimensional conductive material MXene, facilitating the development of supramolecular sustainable coatings. Lignosulfonic acid (LA) and polymerizable quaternary ammonium salt monomers were successfully utilized to synthesize the RTFL with ultra-low glass transition temperatures (-67--38 °C) using a deep eutectic strategy, with lignin content reaching up to 50 wt% without relying on traditional solvents. The RTFL demonstrated, serving as a macromolecular solvent, effectively dispersing and stabilizing MXene while preventing long-term oxidation. When directly coated onto various substrates and subsequently subjected to rapid photopolymerization, the RTFL/MXene coating exhibited remarkable photo-thermal-electric conversion properties. These features meet the requirements of various electrical applications, including Stirling engines and battery charging lamps. This supramolecular approach offers a pathway for developing high biomass content coatings suitable for environmental and energy-related applications.

Multifunctional transparent conductive films via Langmuir-Blodgett assembly of large MXene flakes

The rapid development of information technology has put forward new requirements for multifunctional properties of transparent conductive films (TCFs) beyond their excellent optoelectrical performance. Despite the recent progress in the preparation of multifunctional films composed of Ti3C2Tx MXenes, achieving highly uniform single-layer Ti3C2Tx MXene films (SLMFs) with continuous and dense conductive pathways to realize multifunctional TCFs (M-TCFs) remains a significant challenge. Here, the Langmuir-Blodgett (LB) technique is employed to assemble large Ti3C2Tx MXene (LM) flakes (∼52 μm2) into SLMFs with controlled stacking density and morphology, enabling the fabrication of M-TCFs with high conductivity and transparency simultaneously. The SLMFs assembled from LM flakes (L-SLMFs) not only exhibit balanced optical and electrical properties with a figure of merit of 9.67 (sheet resistance Rs = 318 Ω sq-1 at transmittance T = 88%) due to the close-packed morphology with significantly reduced inter-flake junctions, but also demonstrate excellent electrothermal conversion capability (105.5 °C within 40 s at 20 V when T = 75%) and remarkable absolute shielding effectiveness (up to 7.86 × 105 dB cm2 g-1 at T = 89%). The LB assembly approach provides a straightforward way to produce high-performance M-TCFs for next-generation electronic devices.

A Durable Textile With Advanced Thermal Functions and Electromagnetic Shielding

In the face of increasingly variable cold climates and diverse individual temperature regulation demands, personal thermal management (PTM) textiles with electromagnetic shielding have obtained significant attention. However, the PTM textiles face several challenges, including single heating mode, insufficient durability, and complex preparation processes. Herein, an all-day PTM textile Cotton@PDA/AgNPs (CPANS) with energy-free PRH, energy-saving solar heating, compensatory electrical heating, electromagnetic interference (EMI) shielding, and outstanding durability is fabricated by sequentially growing polydopamine (PDA) and silver nanoparticles (AgNPs) on the cotton fabric (CF). The CPANS exhibits low mid-infrared emissivity (36.6%) and high absorptivity (70.8%), which guarantees the energy-saving heating capability. Moreover, the conductivity of the CPANS is ≈11109 S m-1, enabling an electrical heating temperature of ≈177 °C under a low voltage of 1.1 V and superb EMI shielding effectiveness (≈60 dB). The remarkable adhesive properties of the PDA ensure that the desired durability of the CPANS remains high even after rigorous physical treatments. This innovation shows enormous potential for wearable integrated garments in the future and offers a new ideal for PTM fabrics in the cold.

High-Precision Printing Sandwich Flexible Transparent Silver Mesh for Tunable Electromagnetic Interference Shielding Visualization Windows

Flexible transparent conductive films (FTCFs) with electromagnetic interference (EMI) shielding performance are increasingly crucial as visualization windows in optoelectronic devices due to their capabilities to block electromagnetic radiation (EMR) generated during operation. Metal mesh-based FTCFs have emerged as a promising representative in which EMI shielding effectiveness (SE) can be enhanced by increasing the line width, reducing the line spacing, or increasing mesh thickness. However, these conventional approaches decrease optical transmittance or increase material consumption, thus compromising the optical performance and economic viability. Hence, a significant challenge still remains in the realm of metal mesh-based FTCFs to enhance EMI SE while maintaining their original optical transmittance and equivalent material usage. Herein, we propose an innovative symmetric structural optimization strategy to create silver mesh-based sandwich-FTCFs with arbitrary customized sizes through high-precision extrusion printing technology for tunable EMI shielding performance. The meticulous adjustment of xy-axis offsets and printing starting point ensures perfect alignment of the silver mesh on both sides of the transparent substrate. This approach yields sandwich-FTCFs with optical transmittance equivalent to single-layer-FTCFs under identical parameters while simultaneously achieving up to 40% enhanced EMI SE. This improvement stems from the synergistic effect of multiple internal reflections and wave interference between the symmetric silver meshes. The excellent shielding performance of sandwich-FTCFs is evidenced through effectively blocking electromagnetic waves from common devices such as mobile phones, Bluetooth earphones, and smartwatches. Our work represents a significant advancement in balancing optical transmittance, EMI SE, and material efficiency in high-performance and cost-effective FTCFs.

Wet-spun Ag/PEDOT: PSS composite fibers for high-sensitive SERS sensing and high electrical conducting

Nanometal-based composite fibers have been widely explored in flexible sensors due to their outstanding optical and electrical properties. However, the weak binding force between metallic nanomaterial and fiber greatly limits the real application. In this work, nano silver (Ag) are strongly bonded with poly(3,4-ethylenedioxythiophene)-poly (styrene sulfonate) (PEDOT: PSS) fiber by the wet-spun process. Ag-S chemical bonds are formed by the interaction of Ag and PEDOT. The Ag/PEDOT: PSS composite fiber shows excellent surface-enhanced Raman scattering (SERS) sensitivity on Rhodamine 6G (R6G) molecules. The detection limit can reach 10-11 M and Raman enhancement factor (EF) is of 1.3 × 107. The high-sensitive SERS activity of Ag/PEDOT: PSS composite fiber mainly results from PEDOT: PSS, and the enhancement factor is 3 orders of magnitude better than that of other PEDOT: PSS based SERS substrates. Moreover, the composite fiber has metal-level conductivity of 1019 S/cm. This is 5 times higher than the conductivity of PEDOT: PSS fiber and a two-fold improvement over the reported values for nanometal/PEDOT: PSS based fabrics. The composite fiber has electric stability under bending test with bending speeds of 2 Hz indicating the composite fiber has good structural stability. In addition, the temperature of the composite fiber with 7 cm length can reach 76.5 °C at a voltage of 18 V. Additionally, the composite fiber shows anti-bacterial property and melting drop resistance, which pave the way for the integration of fiber-based optical and electrical sensors in the future multifunctional flexible devices.

Centrifugal Inertia-Induced Directional Alignment of AgNW Network for Preparing Transparent Electromagnetic Interference Shielding Films with Joule Heating Ability

Transparent electromagnetic interference (EMI) shielding is highly desired in specific visual scenes, but the challenge remains in balancing their EMI shielding effectiveness (SE) and optical transmittance. Herein, this study proposed a directionally aligned silver nanowire (AgNW) network construction strategy to address the requirement of high EMI SE and satisfactory light transmittance using a rotation spraying technique. The orientation distribution of AgNW is induced by centrifugal inertia force generated by a high-speed rotating roller, which overcomes the issue of high contact resistance in random networks and achieves high conductivity even at low AgNW network density. Thus, the obtained transparent conductive film achieved a high light transmittance of 72.9% combined with a low sheet resistance of 4.5 Ω sq-1 and a desirable EMI SE value of 35.2 dB at X band, 38.9 dB in the K-band, with the highest SE of 43.4 dB at 20.4 GHz. Simultaneously, the excellent conductivity endowed the film with outstanding Joule heating performance and defogging/deicing ability, ensuring the visual transparency of windows when shielding electromagnetic waves. Hence, this research presents a highly effective strategy for constructing an aligned AgNW network, offering a promising solution for enhancing the performance of optical-electronic devices.

Improved Electromagnetic Interference Shielding Efficiency of PVDF/rGO/AgNW Composites via Low-Pressure Compression Molding and AgNW-Backfilling Strategy

Silver nanowires (AgNWs) have excellent electrical conductivity and nano-sized effects and have been widely used as a high-performance electromagnetic shielding material. However, silver nanowires have poor mechanical properties and are prone to fracture during the preparation of composite materials. In this study, PVDF/rGO/AgNW composites with a segregated structure were prepared using low-pressure compression molding and the AgNW-backfilling process. The low-pressure compression of the composite significantly improves its electromagnetic shielding performance because the low-pressure process can maintain the AgNWs' integrity. The backfilled AgNWs played a vital role in increasing the path of electromagnetic wave propagation and the absorption of electromagnetic waves. The backfilled amount of AgNWs was only 1 wt%, which increased the composite material's conductivity by one order of magnitude. The total electromagnetic interference shielding (SET) of the composite materials increased by 23.3% from 24.88 dB to 30.67 dB. The absorption contribution (SEA/SET) increased from 84.2% to 92.8%, significantly improving the electromagnetic interference shielding and the absorption contribution of the AgNWs in the composites. This was attributed to the backfilling of the porous structure by the AgNWs, which promoted multiple reflections and enhanced the absorption contribution.

Multispectral smart window: Dynamic light modulation and electromagnetic microwave shielding

A novel multispectral smart window has been proposed, which features dynamic modulation of light transmittance and effective shielding against electromagnetic microwave radiation. This design integrates liquid crystal dynamic scattering and dye doping techniques, enabling the dual regulation of transmittance and scattering within a single-layer smart window. Additionally, the precise control of conductive film thickness ensures the attainment of robust microwave signal shielding. We present a theoretical model for ion movement in the presence of an alternating electric field, along with a novel approach to manipulate negative dielectric constant. The proposed model successfully enables a rapid transition between light transparent, absorbing and haze states, with an optimum drive frequency adjustable to approximately 300 Hz. Furthermore, the resistive design of the conductive layer effectively mitigates microwave radiation within the 2-18 GHz range. These findings offer an innovative perspective for future advancements in environmental construction.

Flexible Transparent Films of Oriented Silver Nanowires for a Stretchable Strain Sensor

The potential applications of stretchable strain sensors in wearable electronics have garnered significant attention. However, developing susceptible stretchable strain sensors for practical applications still poses a considerable challenge. The present study introduces a stretchable strain sensor that utilizes silver nanowires (AgNWs) embedded into a polydimethylsiloxane (PDMS) substrate. The AgNWs have high flexibility and electrical conductivity. A stretchable AgNW/Pat-PDMS conductive film was prepared by arranging nanowires on the surface of PDMS using a simple rod coating method. Depending on the orientation angle, the overlap area between nanowires varies, resulting in different levels of separation under a given strain. Due to the separation of the nanowire and the change in current path geometry, the variation in strain resistance of the sensor can be primarily attributed to these factors. Therefore, precision in strain regulation can be adjusted by altering the angle θ (0°, 60°, or 90°) of the nanowire. At the same time, the stability of the AgNW/Pattern-PDMS (AgNW/Pat-PDMS) conductive film application was verified by preparing a sandwich structure PDMS/AgNW/Pat-PDMS stretchable strain sensor. The sensor exhibited high sensitivity within the operating sensing range (gauge factor (GF) of 15 within ~120% strain), superior durability (20,000 bending cycles and 5000 stretching cycles), and excellent response toward bending.

Multi-Functional and Flexible Nano-Silver@MXene Heterostructure-Decorated Graphite Felt for Wearable Thermal Therapy

Wearable heaters with multifunctional performances are urgently required for the future personal health management. However, it is still challengeable to fabricate multifunctional wearable heaters simultaneously with flexibility, air-permeability, Joule heating performance, electromagnetic shielding property, and anti-bacterial ability. Herein, silver nanoparticles (AgNPs)@MXene heterostructure-decorated graphite felts are fabricated by introducing MXene nanosheets onto the graphite felts via a simple dip-coating method and followed by a facile in situ growth approach to grow AgNPs on MXene layers. The obtained AgNPs@MXene heterostructure decorated graphite felts not only maintain the intrinsic flexibility, air-permeability and comfort characteristics of the matrixes, but also present excellent Joule heating performance including wide temperature range (30-128 °C), safe operating conditions (0.9-2.7 V), and rapid thermal response (reaching 128 °C within 100 s at 2.7 V). Besides, the multifunctional graphite felts exhibit excellent electromagnetic shielding effectiveness (53 dB) and outstanding anti-bacterial performances (>95% anti-bacterial rate toward Bacillus subtilis, Escherichia coli and Staphy-lococcus aureus). This work sheds light on a novel avenue to fabricate multifunctional wearable heaters for personal healthcare and personal thermal management.

Capillary Force-Induced Graphene Spontaneous Transfer and Encapsulation of Silver Nanowires for Highly-Stable Transparent Electrodes

Silver nanowires (NWs) (AgNWs) have emerged as the most promising conductive materials in flexible optoelectronic devices owing to their excellent photoelectric properties and mechanical flexibility. It is widely acknowledged that the practical application of AgNW networks faces challenges, such as high surface roughness, poor substrate adhesion, and limited stability. Encapsulating AgNW networks with graphene has been recognized as a viable strategy to tackle these issues. However, conventional methods like self-assembly reduction-oxidation or chemical vapor deposition often yield graphene protective layers with inherent defects. Here, we propose a novel one-step hot-pressing method containing ethanol solution that combines the spontaneous transfer and encapsulation process of rGO films onto the surface of the AgNWs network, enabling the preparation of flexible rGO/AgNWs/PET (reduced graphene oxide/silver NWs/polyethylene terephthalate) electrodes. The composite electrode exhibits outstanding photoelectric properties (T ≈ 88%, R ≈ 6 Ω sq-1) and possesses a smooth surface, primarily attributed to the capillary force generated by ethanol evaporation, ensuring the integrity of the rGO delamination process on the original substrate. The capillary force simultaneously promotes the tight encapsulation of rGO and AgNWs, as well as the welding of the AgNWs junction, thereby enhancing the mechanical stability (20,000 bending cycles and 100 cycles of taping tests), thermal stability (∼30 °C and ∼25% humidity for 150 days), and environmental adaptability (100 days of chemical attack) of the electrode. The electrode's practical feasibility has been validated by its exceptional flexibility and cycle stability (95 and 98% retention after 5000 bending cycles and 12,000 s long-term cycles) in flexible electrochromic devices.

Trunk-Inspired SWCNT-Based Wrinkled Films for Highly-Stretchable Electromagnetic Interference Shielding and Wearable Thermotherapy

Nowadays, the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health, so stretchable electromagnetic interference (EMI) shielding materials are highly demanded. Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins. Inspired by the wrinkled skin of the elephant trunks, herein, we propose a winkled conductive film based on single-walled carbon nanotubes (SWCNTs) for multifunctional EMI applications. The conductive film has a sandwich structure, which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate. The shrinking-induced winkled conductive network could withstand up to 200% tensile strain. Typically, when the stretching direction is parallel to the polarization direction of the electric field, the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200% tensile strain. It is mainly contributed by the increased connection of the SWCNTs. In addition, the film also has good Joule heating performance at several voltages, capable of releasing pains in injured joints. This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.

MXene and AgNW based flexible transparent conductive films with sandwich structure for high-performance EMI shielding and electrical heaters

With the popularization of 5G technology and the development of science and technology, flexible and transparent conductive films (TCF) are increasingly used in the preparation of optoelectronic devices such as electromagnetic shielding devices, transparent flexible heaters, and solar cells. Silver nanowires (AgNW) are considered the best material for replacing indium tin oxide to prepare TCFs due to their excellent comprehensive properties. However, the loose overlap between AgNWs is a significant reason for the high resistance. This article investigates a sandwich structured conductive network composed of AgNW and Ti3C2Tx MXene for high-performance EMI shielding and transparent electrical heaters. Polyethylene pyrrolidone (PVP) solution was used to hydrophilic modify PET substrate, and then MXene, AgNW, and MXene were assembled layer by layer using spin coating method to form a TCF with a sandwich structure. One-dimensional AgNW is used to provide electron transfer channels and improve light penetration, while two-dimensional MXene nanosheets are used for welding AgNWs and adding additional conductive channels. The flexible TCF has excellent transmittance (85.1 % at 550 nm) and EMI shielding efficiency (27.1 dB). At the voltage of 5 V, the TCF used as a heater can reach 85.6 °C. This work offers an innovative approach to creating TCFs for the future generation.

Preparation of CNT/CNF/PDMS/TPU Nanofiber-Based Conductive Films Based on Centrifugal Spinning Method for Strain Sensors

Flexible conductive films are a key component of strain sensors, and their performance directly affects the overall quality of the sensor. However, existing flexible conductive films struggle to maintain high conductivity while simultaneously ensuring excellent flexibility, hydrophobicity, and corrosion resistance, thereby limiting their use in harsh environments. In this paper, a novel method is proposed to fabricate flexible conductive films via centrifugal spinning to generate thermoplastic polyurethane (TPU) nanofiber substrates by employing carbon nanotubes (CNTs) and carbon nanofibers (CNFs) as conductive fillers. These fillers are anchored to the nanofibers through ultrasonic dispersion and impregnation techniques and subsequently modified with polydimethylsiloxane (PDMS). This study focuses on the effect of different ratios of CNTs to CNFs on the film properties. Research demonstrated that at a 1:1 ratio of CNTs to CNFs, with TPU at a 20% concentration and PDMS solution at 2 wt%, the conductive films crafted from these blended fillers exhibited outstanding performance, characterized by electrical conductivity (31.4 S/m), elongation at break (217.5%), and tensile cycling stability (800 cycles at 20% strain). Furthermore, the nanofiber-based conductive films were tested by attaching them to various human body parts. The tests demonstrated that these films effectively respond to motion changes at the wrist, elbow joints, and chest cavity, underscoring their potential as core components in strain sensors.

A Scalable and Robust Personal Health Management Textile with Multiple Desired Thermal Functions and Electromagnetic Shielding

The development of functional textiles combining conventional apparel with advanced technologies for personal health management (PHM) has garnered widespread attention. However, the current PHM textiles often achieve multifunctionality by stacking functional modules, leading to poor durability and scalability. Herein, a scalable and robust PHM textile is designed by integrating electrical, radiative, and solar heating, electromagnetic interference (EMI) shielding, and piezoresistive sensing performance onto cotton fabric. This is achieved through an uncomplicated screen-printing process using silver paste. The conductivity of the PHM textile is ≈1.6  ×  104 S m-1, ensuring an electric heating temperature of ≈134 °C with a low voltage of 1.7 V, as well as an EMI shielding effectiveness of ≈56 dB, and human motion monitoring performance. Surprisingly, the radiative/solar heating capability of the PHM textile surpasses that of traditional warm leather. Even after undergoing rigorous physical and chemical treatments, the PHM textile maintains terrific durability. Additionally, the PHM textile possesses maneuverable scalability and comfortable wearability. This innovative work opens up new avenues for the strategic design of PHM textiles and provides an advantageous guarantee of mass production.

Recent advances in multifunctional electromagnetic interference shielding materials

Electromagnetic interference (EMI) shielding material is the most effective solution to protect electronic devices and human health from the harmful effects of electromagnetic radiation. The study of EMI shielding materials is intensifying in the constantly developing picture of the fourth industrial revolution. Many EMI shielding materials based on metal, carbon, emerging MXene materials, and their composites have been discovered to utilize the EMI shielding performance. However, a huge demand for compact and multi-functional devices requires the integration of new functions into EMI shielding materials. Multifunctional EMI shielding materials perform multiple functions beyond their main function of EMI shielding in a system due to their specific properties. The additional functions can either naturally exist or be specially engineered. This review summarizes the recent progress of cutting-edge multifunctional EMI shielding materials. The possibility of combining multifunction EMI shielding materials, such as strain sensing, humidity sensing, temperature sensing, thermal management, etc., and the difficulties in balancing EMI shielding performance with other functions are also discussed. Lastly, we point out challenges and propose future directions to develop research on multifunctional EMI shielding materials.

3D printed lightweight honeycomb vent structures with subsequent coating of silver nanowires for efficient electromagnetic interference (EMI) shielding

In light of the rapid advancements within the electronic industry, the urgent need for the development and implementation of advanced electromagnetic interference (EMI) shielding materials has become paramount. Herein a novel approach is presented for developing of lightweight honeycomb structures using 3D printing technology, combined with subsequent conductive spray coating, containing Silver Nanowires (AgNWs), to achieve effective EMI shielding as well as air vent functionality for thermal cooling. Using polyol method, AgNWs were synthesized having high aspect ratio and crystallinity for to be used as conductive coating on 3D printed structures. The EMI shielding results in X-band demonstrated that the developed structures exhibit promising EMI shielding properties, up to 35 dB attenuation with 2 mm honeycomb cell size, making them suitable for applications requiring EMI protection along with air venting. More importantly in all samples major contribution of the shielding efficiency comes from the absorption of the EM waves (up to 75 %) inside the structures which is helpful to reduce reflected EM noise. Effort was to effectively addresses the inherent limitations of conventional processing technology, by using additive manufacturing and material science to create structures for EMI shielding applications, bridging the gap between existing materials and desired components.

Scalable Fabrication of Structurally Stable Polymer Film with Excellent UV-Shielding, Fluorescent, and Antibacterial Capabilities

This research presents a new approach to facilely fabricating a multifunctional film using polyvinyl alcohol (PVA) as the base material. The film is modified chemically to incorporate various desirable properties such as high transparency, UV-shielding, antibacterial activity, and fluorescence. The fabrication process of this film is straightforward and efficient. The modified film showed exceptional UV-blocking capability, effectively blocking 100% of UV radiation. It also exhibits strong antibacterial properties. Additionally, the film emitted bright blue fluorescence, which can be useful in various optical and sensing applications. Despite the chemical modification, the film retained the excellent properties of PVA, including high transparency (90%) at 550 nm and good mechanical strength. Furthermore, it demonstrated remarkable stability even under harsh conditions such as exposure to long-term UV radiation, extreme temperatures (-40 or 120 °C), or immersion in different solvents. Overall, this work showcases a promising strategy to develop versatile, structurally stable, transparent, and flexible polymer films with multiple functionalities. These films have potential applications in various fields that require protection, such as packaging materials, biomedical devices, and optical components.

Silver nanowires/cellulose flexible transparent conductive films for electromagnetic interference shielding and electrothermal conversion

Currently, electromagnetic shielding materials need to meet the characteristics of lightweight, high transmittance, and robust conductivity. Silver nanowires (AgNWs) have progressively found applications in recent years owing to their excellent aspect ratio, conductivity, and flexibility. The properties of AgNWs vary with different aspect ratios, and the length and diameter of AgNWs often exert diverse influences on the photoelectric properties of conductive films. In this study, we combined AgNWs with hydroxypropyl methylcellulose (HPMC) and employed a directional stacking arrangement method to apply AgNWs onto the PET substrate, investigating the properties of four distinct aspect ratios of AgNWs (1000, 750, 625, and 531). Ultimately, the prepared four films achieved electromagnetic shielding capabilities ranging from 26.6 dB to 32.8 dB, with a transmittance range of 89.8% to 94.6%, showing excellent electromagnetic shielding properties. Moreover, the prepared films showed an exceedingly low roughness value (RMS = 7.07 nm), remarkable flexibility, and superior oxidation resistance with the facilitation of HPMC. The films also showed exceptional electrothermal conversion prowess, achieving saturation temperature within a mere 8 seconds, thereby displaying a rapid thermal response. Furthermore, when a voltage of 4 V was applied, the temperature of the thin film remained essentially constant for a duration of 2500 seconds, highlighting its admirable thermal stability, which is of great significance for the development of flexible and transparent electromagnetic shielding materials in the future.

Multifunctional Flexible MXene/AgNW Composite Thin Film with Ultrahigh Conductivity Enabled by a Sandwich-Structured Assembly Strategy

Flexible composite films have attracted considerable attention due to great potential for healthcare, telecommunication, and aerospace. However, it is still challenging to achieve high conductivity and multifunctional integration, mainly due to poorly designed composite structures of these films. Herein, a novel sandwich-structured assembly strategy is proposed to fabricate flexible composite thin films made of Ag nanowire (AgNW) core and MXene layers by combination of spray coating and vacuum filtration process. In this case, ultrathin MXene layers play crucial roles in constructing compact composite structures strongly anchored to substrate with extensive hydrogen-bonding interactions. The resultant sandwich-structured MXene/AgNW composite thin films (SMAFs) exhibit ultrahigh electrical conductivity (up to 27193 S cm-1 ), resulting in exceptional electromagnetic interference shielding effectiveness of 16 223.3 dB cm2 g-1 and impressive Joule heating performance with rapid heating rate of 10.4 °C s-1 . Moreover, the uniform SMAFs can also be facilely cut into kirigami-patterned interconnects, which indicate superior strain-insensitive conductance even after long-term exposure to extreme temperatures. The demonstrated strategy offers a significant paradigm to construct multifunctional composite thin films for next-generation integrated flexible electronics with practical applications.

High-Performance Transparent Ultrabroadband Electromagnetic Radiation Shielding from Microwave toward Terahertz

In the era of fifth-generation networks and Internet-of-Things, the use of multiband electromagnetic radiation shielding is highly desirable for next-generation electronic devices. Herein, we report a systematic exploration of optoelectronic behaviors of ultrathin-silver-based shielding prototype (USP) film structures at the nanometer scale, unlocking the transparent ultrabroadband electromagnetic interference (EMI) shielding from microwave to terahertz frequencies. A theoretical model is proposed to optimize USP structures to achieve increased transparency, whereby optical antireflection resonances are introduced in dielectrics in conjunction with remarkable EMI shielding capability. USP can realize a state-of-the-art effective electromagnetic radiation shielding bandwidth with measured frequencies from 8 GHz up to 2 THz. Experimental results show that a basic USP (dAg = 10 nm) offers an average shielding efficiency of ∼27.5 dB from the X- to Ka-bands (8-40 GHz) and maintains a stable shielding performance of ∼22.6 dB across a broad range of 0.5-2 THz, with a measured optical transmittance of ∼95.2%. This extraordinary performance of ultrathin-silver-based film structures provides a new ultrabroadband EMI shielding paradigm for potential applications in next-generation electronics.

Flexible Transparent Conductive Electrodes: Unveiling Growth Mechanisms, Material Dimensions, Fabrication Methods, and Design Strategies

Flexible transparent conductive electrodes (FTCEs) constitute an indispensable component in state-of-the-art electronic devices, such as wearable flexible sensors, flexible displays, artificial skin, and biomedical devices, etc. This review paper offers a comprehensive overview of the fabrication techniques, growth modes, material dimensions, design, and their impacts on FTCEs fabrication. The growth modes, such as the "Stranski-Krastanov growth," "Frank-van der Merwe growth," and "Volmer-Weber growth" modes provide flexibility in fabricating FTCEs. Application of different materials including 0D, 1D, 2D, polymer composites, conductive oxides, and hybrid materials in FTCE fabrication, emphasizing their suitability in flexible devices are discussed. This review also delves into the design strategies of FTCEs, including microgrids, nanotroughs, nanomesh, nanowires network, and "kirigami"-inspired patterns, etc. The pros and cons associated with these materials and designs are also addressed appropriately. Considerations such as trade-offs between electrical conductivity and optical transparency or "figure of merit (FoM)," "strain engineering," "work function," and "haze" are also discussed briefly. Finally, this review outlines the challenges and opportunities in the current and future development of FTCEs for flexible electronics, including the improved trade-offs between optoelectronic parameters, novel materials development, mechanical stability, reproducibility, scalability, and durability enhancement, safety, biocompatibility, etc.

Multifunctional Flexible AgNW/MXene/PDMS Composite Films for Efficient Electromagnetic Interference Shielding and Strain Sensing

With the rapid development of electronic information technology, composite materials with outstanding performance in terms of electromagnetic interference (EMI) shielding and strain sensing are crucial for next-generation smart wearable electronic devices. However, the fabrication of flexible composite films with dual functionality remains a significant challenge. Herein, multifunctional flexible composite films with exciting EMI shielding and strain sensing properties were constructed using a facile vacuum-assisted filtration process and transfer method. The films consisted of ultrathin AgNW/MXene (Ti3C2Tx)/AgNW conductive networks (1 μm) attached to a flexible polydimethylsiloxane (PDMS) substrate. The obtained AgNW/MXene/PDMS composite film exhibited an exceptional EMI shielding effectiveness of 50.82 dB and good flexibility (retaining 93.67 and 90.18% of its original value after 1000 bending and stretching cycles, respectively), which are attributed to the enhanced multilayer internal reflection network created by the AgNWs and MXene as well as the synergistic effect of PDMS. Besides EMI shielding, the composite films also displayed remarkable strain sensing properties. They exhibited a wide linear range of tensile strain up to 68% with a gauge factor of 468. They also showed fast response, ultralow detection limit, and high mechanical stability. Interestingly, the composite films could also detect motion and voice recognition, demonstrating their potential as wearable sensors. This study highlights the effectiveness of multifunctional flexible AgNW/MXene/PDMS composite films in resisting electromagnetic radiation and monitoring human motion, thereby providing a promising solution for the development of flexible wearable electronic devices in complex electromagnetic environments.

Enhanced ultra high frequency EMI shielding with controlled ITO nano-branch width via different tin material types

The development of technologies for electromagnetic wave contamination has garnered attention. Among the various electromagnetic wave frequencies, for high frequencies such as those in the K and Ka ranges, there is a limitation of using only the properties of a single material. Therefore, it is necessary to improve the absorption coefficients by increasing the path of electromagnetic waves through internal scattering at an interface or a structure inside the material. Here, we accurately demonstrated the role of Sn in the growth of an indium tin oxide (ITO) nano-branch structure and grew high-density ITO nano-branches with the lowest thickness possible. Consequently, we obtained shielding efficiencies of 21.09 dB (K band) and 17.81 dB (Ka band) for a film with a thickness of 0.00364 mm. Owing to the significantly high specific shielding efficiency and low thickness and weight, it is expected to be applied in various fields.

Super-strong and high-performance electrical film heater derived from silver nanowire/aligned bacterial cellulose film

High-performance electrical Joule heaters with high mechanical properties, low driving voltage, rapid response, and flexibility are highly desirable for portable thermal management. Herein, by using aligned bacterial cellulose (BC) and silver nanowire (AgNW), we fabricated a novel film heater based on Joule heating phenomena. The aligned BC film prepared by stretching BC hydrogel and hot-pressing drying technology showed outstanding mechanical properties and flexibility. The ultrahigh strength of up to 1018 MPa and the toughness of 20 MJ/m3 were obtained for the aligned BC film with 40% wet-stretching (BC-40). In addition, the aligned BC film could be folded into desirable shapes. The AgNW was spray-coated on the surface of aligned BC-40 film and then covered with polydimethylsiloxane to form a P@AgNW@BC heater. P@AgNW@BC heater showed excellent conductivity, which endowed the film heater with an outstanding Joule heating performance. P@AgNW@BC heater could reach ~ 98 ℃ at a very low driving voltage of 4 V with a rapid heating response (13 s) and long-term temperature stability. The P@AgNW@BC heater with such an outstanding heating performance can be used as a flexible heating device for different applications in daily life like deicing/defogging device, wearable thermotherapy, etc.Affiliations: Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.yes, we confirmed the affiliations are correct. Article title: Kindly check and confirm the edit made in the article title.Thanks, the title is no problem.

Enhancing Light Extraction Efficiency in OLED Using Scattering Structure-Embedded DMD-Based Transparent Composite Electrodes

This study investigates the application of scattering structures to the metal layer in a DMD (Dielectric/Metal/Dielectric) configuration through plasma treatment. The purpose is to enhance the light extraction efficiency of organic light-emitting diodes (OLEDs). Different plasma conditions were explored to create scattering structures on the metal layer. The fabricated devices were characterized for their electrical and optical properties. The results demonstrate that the introduction of scattering structures through plasma treatment effectively improves the light extraction efficiency of OLEDs. Specifically, using O2-plasma treatment on the metal layer resulted in significant enhancements in the total transmittance, haze, and figure of merit. These findings suggest that incorporating scattering structures within the DMD configuration can effectively promote light extraction in OLEDs, leading to enhanced overall performance and light efficiency.

Structural design and preparation of Ti3C2Tx MXene/polymer composites for absorption-dominated electromagnetic interference shielding

Electromagnetic interference (EMI) is a pervasive and harmful phenomenon in modern society that affects the functionality and reliability of electronic devices and poses a threat to human health. To address this issue, EMI-shielding materials with high absorption performance have attracted considerable attention. Among various candidates, two-dimensional MXenes are promising materials for EMI shielding due to their high conductivity and tunable surface chemistry. Moreover, by incorporating magnetic and conductive fillers into MXene/polymer composites, the EMI shielding performance can be further improved through structural design and impedance matching. Herein, we provide a comprehensive review of the recent progress in MXene/polymer composites for absorption-dominated EMI shielding applications. We summarize the fabrication methods and EMI shielding mechanisms of different composite structures, such as homogeneous, multilayer, segregated, porous, and hybrid structures. We also analyze the advantages and disadvantages of these structures in terms of EMI shielding effectiveness and the absorption ratio. Furthermore, we discuss the roles of magnetic and conductive fillers in modulating the electrical properties and EMI shielding performance of the composites. We also introduce the methods for evaluating the EMI shielding performance of the materials and emphasize the electromagnetic parameters and challenges. Finally, we provide insights and suggestions for the future development of MXene/polymer composites for EMI shielding applications.

Recent progress in energy, environment, and electronic applications of MXene nanomaterials

Since the discovery of graphene, two-dimensional (2D) materials have gained widespread attention, owing to their appealing properties for various technological applications. Etched from their parent MAX phases, MXene is a newly emerged 2D material that was first reported in 2011. Since then, a lot of theoretical and experimental work has been done on more than 30 MXene structures for various applications. Given this, in the present review, we have tried to cover the multidisciplinary aspects of MXene including its structures, synthesis methods, and electronic, mechanical, optoelectronic, and magnetic properties. From an application point of view, we explore MXene-based supercapacitors, gas sensors, strain sensors, biosensors, electromagnetic interference shielding, microwave absorption, memristors, and artificial synaptic devices. Also, the impact of MXene-based materials on the characteristics of respective applications is systematically explored. This review provides the current status of MXene nanomaterials for various applications and possible future developments in this field.

Advances in the synthesis and applications of 2D MXene-metal nanomaterials

MXenes, two-dimensional (2D) materials that consist of transition metal carbides, nitrides and/or carbonitrides, have recently attracted much attention in energy-related and biomedicine fields. These materials have substantial advantages over traditional carbon graphenes: they possess high conductivity, high strength, excellent chemical and mechanical stability, and superior hydrophilic properties. Furthermore, diverse functional groups such as -OH, -O, and -F located on the surface of MXenes aid the immobilization of numerous noble metal nanoparticles (NP). Therefore, 2D MXene composite materials have become an important and convenient option of being applied as support materials in many fields. In this review, the advances in the synthesis (including morphology studies, characterization, physicochemical properties) and applications of the currently known 2D MXene-metal (Pd, Ag, Au, and Cu) nanomaterials are summarized based on critical analysis of the literature in this field. Importantly, the current state of the art, challenges, and the potential for future research on broad applications of MXene-metal nanomaterials have been discussed.

Radiation synthesis of MXene/Ag nanoparticle hybrids for efficient photothermal conversion of polyurethane films

Flexible conductive films based on light-to-heat conversion are promising for the next-generation electronic devices. A flexible waterborne polyurethane composite film (PU/MA) with excellent photothermal conversion performance was obtained by combination of PU and silver nanoparticle decorated MXene (MX/Ag). The silver nanoparticles (AgNPs) uniformly decorated on the MXene surface by γ-ray irradiation induced reduction. Because of the synergistic effect of MXene with outstanding light-to-heat conversion efficiency and the AgNPs with plasmonic effect, the surface temperature of the PU/MA-II (0.4%) composite with lower MXene content increased from room temperature to 60.7 °C at 5 min under 85 mW cm^-2 light irradiation. Besides, the tensile strength of PU/MA-II (0.4%) increased from 20.9 MPa (pure PU) to 27.5 MPa. The flexible PU/MA composite film shows great potential in the field of thermal management of flexible wearable electronic devices.

Multifunctional carbon nanotubes-based hybrid aerogels with high-efficiency electromagnetic wave absorption at elevated temperature

In the complex engineering applications of electromagnetic (EM) wave-absorbing materials, it is insufficient for these materials to exhibit only efficient EM wave attenuation ability. EM wave-absorbing materials featuring numerous multifunctional properties are increasingly attractive for next-generation wireless communication and smart devices. Herein, we constructed a lightweight and robust multifunctional hybrid aerogel consisting of carbon nanotubes/aramid nanofibers/polyimide with low shrinkage and high porosity. The hybrid aerogels exhibit excellent EM wave attenuation, with an effective absorption bandwidth covering the entire X-band from 25 °C to 400 °C. The conductive loss capacity of the hybrid aerogel is enhanced under thermal drive, which results in an enhanced ability to attenuate EM waves, as evidenced by the fact that the best-fit thickness drops from 5.3 to 3.6 mm with increasing temperature. In addition, the hybrid aerogels are capable to efficiently absorb sound waves, with an average absorption coefficient as high as 0.86 at 1-6.3 kHz, and they exhibit superior thermal insulation properties, with a thermal conductivity as low as 41 ± 2 mW/mK. They are thus suitable for applications in the anti-icing and infrared stealth fields. The prepared multifunctional aerogels have considerable potential for EM protection, noise reduction, and thermal insulation in harsh thermal environments.

Transparent and Flexible Composite Films with Excellent Electromagnetic Interference Shielding and Thermal Insulating Performance

As the working environment becomes more complex, the visualization of windows in electronic devices increasingly requires transparent and flexible electromagnetic interference (EMI) shielding films. There is a need for materials with EMI shielding properties, while maintaining excellent high light transmission and good thermal insulation. However, the preparation of such multifunctional materials remains challenging due to the respective mechanisms of action of the different properties. Herein, a multilayer structure strategy is proposed to fabricate transparent and flexible indium tin oxide (ITO)/silver nanowire (AgNW) composite films, achieving a multifunctional integration of high light transmission, strong EMI shielding, and good thermal insulation properties of the composite films. Simultaneously, the layered structure was designed and the potential optimization mechanism of the EMI shielding performance of the composite film was analyzed, providing great flexibility for the preparation of transparent composite films. The combination of excellent EMI shielding performance, outstanding near-infrared shielding performance, and high light transmittance makes the ITO/AgNW (IA) composite films promising for abundant potential applications.

Flexible Wearable Electronic Fabrics with Dual Functions of Efficient EMI Shielding and Electric Heating for Triboelectric Nanogenerators

Traditional conductive fabrics are prepared by the synthesis of conductive polymers and the coating modification of metals or carbon black conductive materials. However, the conductive fabrics cause a significant decline in performance after washing or mechanical wear, which limits their application. Moreover, the single function of the traditional conductive fabric is also the reason that limits its wide application. In order to prepare a wearable, stable, high-performance, washable, multifunctional conductive fabric, we have carried out related research. In this work, polydopamine was used as a bonding layer, an adsorption reduction layer, and a protective layer to improve the bonding between silver nanoparticles and carbon nanotubes (CNTs) on the polyester fabric surface so as to prepare a multifunctional conductive fabric with a high-stability "sandwich" structure, in which a Ag-NPS@CNT structure acting as an intermediate conductive layer formed on the inner layer PDA@CNT by electroless silver plating and the outermost layer PDA@CNT coated on the surface of the intermediate conductive layer by the impregnation-drying method. The sheet resistance of an E-Fabric can reach 2.11 Ω/□ due to the uniform and dense conductive path formed by the special structure Ag-NPs@CNT. At a low voltage of 1.5 V, the E-Fabric can reach 117 °C in 50 s and remain stable. The electrical conductivity and current heating properties of the E-Fabric remain good even after multiple washing or bending tests. Due to its stable and outstanding electrical conductivity, the E-Fabric has an electromagnetic shielding efficiency (SE_T) of 35.3 dB in the X-band (8.2-12.4 GHz). In addition, E-Fabric-based spin-coated poly(methyl methacrylate) or polydimethylsiloxane electrodes exhibit excellent performance in nanogenerators. Through the low-frequency friction of the human body, transient voltages up to 4 V can be generated from a 2 cm × 2 cm electrode sample. The output power of a single generator can reach about 12 nW/cm². Therefore, an E-Fabric is considered to have great potential in the fields of electric heating, electromagnetic shielding, and smart wearable devices.

Transparent and Stretchable Electromagnetic Interference Shielding Film with Fence-like Aligned Silver Nanowire Conductive Network

Flexible transparent conductive electrodes (TCEs) that can be used as electromagnetic interference (EMI) shielding materials have a great potential for use as electronic components in optical window and display applications. However, development of TCEs that display high shielding effectiveness (SE) and good stretchability for flexible electronic device applications has proven challenging. Herein, this study describes a stretchable polydimethylsiloxane (PDMS)/silver nanowire (AgNW) TCE with a fence-like aligned conductive network that is fabricated via pre-stretching method. The fence-like AgNW network endowed the PDMS/AgNW film with excellent optoelectronic properties, i.e., low sheet resistance of 7.68 Ω sq^-1 at 73.7% optical transmittance, thus causing an effective EMI SE of 32.2 dB at X-band. More importantly, the fence-like aligned AgNW conductive network reveals a high stability toward tensile deformation, thus gives the PDMS/AgNW film stretch-stable conductivity and EMI shielding property in the strain range of 0-100%. Typically, the film can reserve ≈70% or 80% of its initial EMI SE when stretching at 100% strain or stretching/releasing (50% strain) for 128 cycles, respectively. Additionally, the film exhibits a low-voltage driven and stretchable Joule heating performance. With these overall performances, the PDMS/AgNW film should be well suited for use in flexible and stretchable optical electronic devices.

Study on the Controllable Preparation of Nd3+ Doped in Fe3O4 Nanoparticles for Magnetic Protective Fabrics

Magnetic protective fabrics with fine wearability and great protective properties are highly desirable for aerospace, national defense, and wearable protective applications. The study of the controllable preparation method of Nd3+ doped in Fe3O4 nanoparticles with supposed magnetic properties remains a challenge. The characterization of the microstructure, elemental composition, and magnetic properties of NdFe2O4 nanoparticles was verified. Then, the surface of NdFe2O4 was treated with glyceric acid to provide sufficient –OH. Subsequently, the connection of the nanoparticle by the succinimide group was studied and then grafted onto cotton fabrics as its bridging effect. The optimal loading rate of the functional fabrics with nanoparticles of an average size of 230 nm was 1.37% after a 25% alkali pretreatment. The color fatness to rubbing results showed better stability after washing and drying. The corresponding hysteresis loop indicated that the functional fabrics exhibited typical magnetism behavior with a closed “S” shape and a magnetic saturation value of 17.61 emu.g−1 with a particle size of 230 nm. However, the magnetic saturation value of the cotton fabric of 90 nm was just 4.89 emu.g−1, exhibiting controllable preparation for the aimed electromagnetic properties and great potential in radiation protective fields. The electrochemical properties of the functional fabrics exhibited extremely weak electrical conductivity caused by the movement of the magnetic dipole derived from the NdFe2O4 nanoparticles.

Controlled Distributed Ti3 C2 Tx Hollow Microspheres on Thermally Conductive Polyimide Composite Films for Excellent Electromagnetic Interference Shielding

Flexible multifunctional polymer-based electromagnetic interference (EMI) shielding composite films have important applications in the fields of 5G communication technology, wearable electronic devices, and artificial intelligence. Based on the design of a porous/multilayered structure and using polyimide (PI) as the matrix and polymethyl methacrylate (PMMA) microspheres as the template, flexible (Fe₃ O₄ /PI)-Ti₃ C₂ T_x -(Fe₃ O₄ /PI) composite films with controllable pore sizes and distribution of Ti₃ C₂ T_x hollow microspheres are successfully prepared by sacrificial template method. Owing to the porous/multilayered structure, when the pore size of the Ti₃ C₂ T_x hollow microspheres is 10 µm and the mass ratio of PMMA/Ti₃ C₂ T_x is 2:1, the (Fe₃ O₄ /PI)-Ti₃ C₂ T_x -(Fe₃ O₄ /PI) composite film has the most excellent EMI shielding performance, with EMI shielding effectiveness (EMI SE) of 85 dB. It is further verified by finite element simulation that the composite film has an excellent shielding effect on electromagnetic waves. In addition, the composite film has good thermal conductivity (thermal conductivity coefficient of 3.49 W (m·K)^-1 ) and mechanical properties (tensile strength of 65.3 MPa). This flexible (Fe₃ O₄ /PI)-Ti₃ C₂ T_x -(Fe₃ O₄ /PI) composite film with excellent EMI shielding performance, thermal conductivity, and mechanical properties has demonstrated great potential for applications in EMI shielding protection for high-power, portable, and wearable flexible electronic devices.

Silver-Nanowire-Based Elastic Conductors: Preparation Processes and Substrate Adhesion

The production of flexible electronic systems includes stretchable electrical interconnections and flexible electronic components, promoting the research and development of flexible conductors and stretchable conductive materials with large bending deformation or torsion resistance. Silver nanowires have the advantages of high conductivity, good transparency and flexibility in the development of flexible electronic products. In order to further prepare system-level flexible systems (such as autonomous full-software robots, etc.), it is necessary to focus on the conductivity of the system's composite conductor and the robustness of the system at the physical level. In terms of conductor preparation processes and substrate adhesion strategies, the more commonly used solutions are selected. Four kinds of elastic preparation processes (pretensioned/geometrically topological matrix, conductive fiber, aerogel composite, mixed percolation dopant) and five kinds of processes (coating, embedding, changing surface energy, chemical bond and force, adjusting tension and diffusion) to enhance the adhesion of composite conductors using silver nanowires as current-carrying channel substrates were reviewed. It is recommended to use the preparation process of mixed percolation doping and the adhesion mode of embedding/chemical bonding under non-special conditions. Developments in 3D printing and soft robots are also discussed.

Rational Design of Ti3C2Tx MXene Inks for Conductive, Transparent Films

Transparent conductive electrodes (TCEs) with a high figure of merit (FOM_e, defined as the ratio of transmittance to sheet resistance) are crucial for transparent electronic devices, such as touch screens, micro-supercapacitors, and transparent antennas. Two-dimensional (2D) titanium carbide (Ti₃C₂T_x), known as MXene, possesses metallic conductivity and a hydrophilic surface, suggesting dispersion stability of MXenes in aqueous media allowing the fabrication of MXene-based TCEs by solution processing. However, achieving high FOM_e MXene TCEs has been hindered mainly due to the low intrinsic conductivity caused by percolation problems. Here, we have managed to resolve these problems by (1) using large-sized Ti₃C₂T_x flakes (∼12.2 μm) to reduce interflake resistance and (2) constructing compact microstructures by blade coating. Consequently, excellent optoelectronic properties have been achieved in the blade-coated Ti₃C₂T_x films, i.e., a DC conductivity of 19 325 S cm^-1 at transmittances of 83.4% (≈6.7 nm) was obtained. We also demonstrate the applications of Ti₃C₂T_x TCEs in transparent Joule heaters and the field of supercapacitors, showing an outstanding Joule heating effect and high rate response, respectively, suggesting enormous potential applications in flexible, transparent electronic devices.

A high-performance, oxidation resistance and flexible Zn@MXene/cellulose nanofibers electromagnetic shielding film

Next-generation wearable electromagnetic interference (EMI) materials need to be provided with oxidation resistance, lightness, and flexibility. In this study, a high-performance EMI film with synergistic enhancement of Zn²⁺@Ti₃C₂T _x MXene/cellulose nanofibers (CNF) was found. The unique Zn@Ti₃C₂T _x MXene/CNF heterogeneous interface facilitates the loss of interface polarization, making the total electromagnetic shielding effectiveness (EMI SE_T) and shielding effectiveness per unit thickness (SE/d) of the films reach 60.3 dB and 5025 dB mm^-1, respectively, in the X-band at the thickness of 12 μm ± 2 μm, significantly exceeding that of other MXene-based shielding materials. In addition, the coefficient of absorption gradually increases with the increasing CNF content. Moreover, under the synergistic effect of Zn²⁺, the film shows excellent oxidation resistance (maintaining stable performance after 30 days), greatly exceeding the previous test cycle. Furthermore, the mechanical performance and flexibility of the film are greatly enhanced (tensile strength at 60 MPa, and maintaining stable performance after 100 times bending tests) due to the CNF and hot-pressing process. Therefore, with the enhancement of the EMI performance, high flexibility and oxidation resistance under high temperature and high humidity conditions, the as-prepared films have wide practical significance and broad application prospects in a series of complex applications, such as flexible wearable fields, ocean engineering fields and high-power device packaging fields.

High-Throughput Microfluidic Production of Bimetallic Nanoparticles on MXene Nanosheets and Application in Hydrogen Peroxide Detection

Nanoparticle-functionalized transition-metal carbides and nitrides (MXenes) have attracted extensive attention in electrochemical detection owing to their excellent catalytic performance. However, the mainstream synthetic routes rely on the batch method requiring strict experimental conditions, generally leading to low yield and poor size tunability of particles. Herein, we report a high-throughput and continuous microfluidic platform for preparing a functional MXene (Ti₃C₂T_x) with bimetallic nanoparticles (Pt-Pd NPs) at room temperature. Two 3D micromixers with helical elements were integrated into the microfluidic platform to enhance the secondary flow for promoting transport and reaction in the synthesis process. The rapid mixing and strong vortices in these 3D micromixers prevent aggregation of NPs in the synthesis process, enabling a homogeneous distribution of Pt-Pd NPs. In this study, Pt-Pd NPs loaded on the MXene nanosheets were synthesized under various hydrodynamic conditions of 1-15 mL min^-1 with controlled sizes, densities, and compositions. The mean size of Pt-Pd NPs could be readily controlled within the range 2.4-9.3 nm with high production rates up to 13 mg min^-1. In addition, synthetic and electrochemical parameters were separately optimized to improve the electrochemical performance of Ti₃C₂T_x/Pt-Pd. Finally, the optimized Ti₃C₂T_x/Pt-Pd was used for hydrogen peroxide (H₂O₂) detection and shows excellent electrocatalytic activity. The electrode modified with Ti₃C₂T_x/Pt-Pd here presents a wide detection range for H₂O₂ from 1 to 12 000 μM with a limit of detection down to 0.3 μM and a sensitivity up to 300 μA mM^-1 cm^-2, superior to those prepared in the traditional batch method. The proposed microfluidic approach could greatly enhance the electrochemical performance of Ti₃C₂T_x/Pt-Pd, and sheds new light on the large-scale production and catalytic application of the functional nanocomposites.

Significantly Enhanced Electromagnetic Interference Shielding Performances of Epoxy Nanocomposites with Long-Range Aligned Lamellar Structures

High‑efficiency electromagnetic interference (EMI) shielding materials are of great importance for electronic equipment reliability, information security and human health. In this work, bidirectional aligned Ti₃C₂T_x@Fe₃O₄/CNF aerogels (BTFCA) were firstly assembled by bidirectional freezing and freeze-drying technique, and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins. Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect, when the mass fraction of Ti₃C₂T_x and Fe₃O₄ are 2.96 and 1.48 wt%, BTFCA/epoxy nanocomposites show outstanding EMI shielding effectiveness of 79 dB, about 10 times of that of blended Ti₃C₂T_x@Fe₃O₄/epoxy (8 dB) nanocomposites with the same loadings of Ti₃C₂T_x and Fe₃O₄. Meantime, the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability (T_{heat-resistance index} of 198.7 °C) and mechanical properties (storage modulus of 9902.1 MPa, Young's modulus of 4.51 GPa and hardness of 0.34 GPa). Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security, aerospace and weapon manufacturing, etc.

Flexible, Transparent, and Hazy Composite Cellulosic Film with Interconnected Silver Nanowire Networks for EMI Shielding and Joule Heating

An optical transparent and hazy film with admirable flexibility, electromagnetic interference (EMI) shielding, and Joule heating performance meeting the requirements of optoelectronic devices is significantly desirable. Herein, a cellulose paper was infiltrated by epoxy resin to fabricate a transparent cellulose paper (TCP) with high transparency, optical haze, and favorable flexibility, owing to effective light scattering and mechanical enhancement of the cellulose network. Moreover, a highly connected silver nanowire (AgNW) network was constructed on the TCP substrate by the spray-coating method and appropriate thermal annealing technique to realize high electrical conductivity and favorable optical transmittance of the composite film at the same time, followed by coating of a polydimethylsiloxane (PDMS) layer for protection of the AgNW network. The obtained PDMS/AgNWs/TCP composite film features considerable optical transmittance (up to 86.8%) and haze (up to 97.7%), while satisfactory EMI shielding effectiveness (SE) (up to 39.1 dB, 8.2-12.4 GHz) as well as strong mechanical strength (higher than 41 MPa) were achieved. The coated PDMS layer prevented the AgNW network from falling off and ensured the long-term stability of the PDMS/AgNWs/TCP composite film under deformations. In addition, the multifunctional PDMS/AgNWs/TCP composite film also exhibited excellent Joule heating performance with low supplied voltages, rapid response, and sufficient stability. This work demonstrates a novel pathway to improve the performance of multifunctional transparent composite films for future advanced optoelectronic devices.

Absorption-Dominant, Low-Reflection Multifunctional Electromagnetic Shielding Material Derived from Hydrolysate of Waste Leather Scraps

High-performance flexible conductive films are highly promising for the development of wearable devices, artificial intelligence, medical care, etc. Herein, a three-step procedure was developed to produce electromagnetic interference (EMI) shielding, Joule heating, and a hydrophobic nanofiber film based on hydrolysate of waste leather scraps (HWLS): (i) electrospinning preparation of the HWLS/polyacrylonitrile (PAN)/zeolitic imidazolate framework-67 (ZIF-67) nanofiber film, (ii) carbonization of the HWLS/PAN/ZIF-67 nanofiber film, and (iii) coating of the carbon nanofiber@cobalt (Co@CNF) nanofiber film with perfluorooctyltriethoxysilane (POTS). The X-ray diffraction results showed that metal nanoparticles and amorphous carbon had obvious peaks. The micromorphology results showed that metal nanoparticles were coated with carbon nanofibers. The conductivity and shielding efficiency of the carbon nanofiber film with 250 μm thickness could reach 45 S/m and 49 dB, respectively, and absorption values (A > 0.5) were higher than reflection (R) values for the Co@CNF nanofiber film, which indicated that the contribution of absorption loss was more significant than that of reflection loss. Ultrafast electrothermal response performances were also achieved, which could guarantee the normal functioning of films in cold conditions. The water contact angle of the Co@CNF@POTS nanofiber film was ∼151.3°, which displayed a self-cleaning property with water-proofing and antifouling. Absorption-dominant and low-reflection EMI shielding and electrothermal films not only showed broad application potential in flexible wearable electronic devices but also provided new avenues for the utilization of leather solid waste.

Layer-by-Layer Assembly of Multifunctional NR/MXene/CNTs Composite Films with Exceptional Electromagnetic Interference Shielding Performances and Excellent Mechanical Properties

With the rapid advance of electronics, the light, flexible, and multifunctional composite films with high electromagnetic interference (EMI) shielding effectiveness and excellent thermal management are highly desirable for next-generation portable and wearable electronic devices. Herein, a series of flexible and ultrathin natural rubber/MXene/carbon nanotubes (NR/MXene/CNTs) composite films with sandwich structure are constructed layer by layer through a facile vacuum-assisted filtration method for EMI shielding and Joule heating application. The fabricated NR/MXene/CNTs-50 composite film, with NR/MXene as inner layer and NR/CNTs as out layers, not only has high EMI shielding efficient, but also has excellent comprehensive mechanical properties at the thickness of only 200 µm. In addition, the superior environmental durability, high electrothermal conversion efficiency, hydrophobicity, and fine performance stability after periodic cyclic bending make the film possess more value in practical application.