Insights into Mechanism of Hypochlorite-Induced Functionalization of Polymers toward Separating BFR-Containing Components from Microplastics

The aging and pollution behavior of microplastics in tap water supply system subjected to residual chlorine exposure

This study investigated the aging and pollution behavior of acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) microplastics (MPs) exposed to residual chlorine in tap water distribution systems. The ABS and PC MPs in the aging processes were analyzed using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Results revealed that 0.4 mg/L residual chlorine could induce morphological changes, increase surface oxygen-containing functional groups, and enhance the hydrophilicity of MPs at the CT value of 9216 mg·min/L. Additionally, both ABS and PC MPs released dissolved organic matter (DOM) into water, with higher DOM concentrations observed in the presence of residual chlorine. Besides, this interaction also led to the formation of trichloromethane (TCM). And the TCM production increased with higher MPs concentrations, smaller particle size, and longer chlorine exposure time.

Hypercrosslinked waste polycarbonate to remove heavy metal contaminants from wastewater

In this research, the waste polycarbonate was hypercrosslinked during the Friedel-Crafts reaction to eliminate metallic ions from the wastewater solution. The experiments for inspecting the adsorption behavior of lead and cadmium ions were conducted at the initial concentration of 20-100 mg/L, contact time of 10-80 min, temperature of 20-80 °C, and pH of 6-11. The isotherm, kinetic, and thermodynamic models have been used to explain the behavior of the metal ions removal process. The correlation coefficient and adsorption capacity of the kinetic model for cadmium ion have obtained 0.995 and 160.183 mg/g, respectively, and the correlation coefficient and adsorption capacity of the kinetic model for lead ion has obtained 0.998 and 160.53 mg/g, respectively, which declared that the cascade was not monolayer. The correlation coefficient of the Freundlich is calculated at 0.995 and 0.998 for Cd and Pb, respectively, indicating the resin plane was not homogenized. The n constant for cadmium and lead ions has been calculated at 2.060 and 1.836, respectively, confirming that the resin is not homogenized, and the process has performed well. Afterward, the values of enthalpy and Gibbs free energy changes were obtained at - 7.68 kJ/mol and - 0.0231 kJ/mol.K for lead ions, respectively, which implies the exothermic and spontaneous state of the process. The values of enthalpy and Gibbs free energy changes have been obtained at - 6.62 kJ/mol and - 0.0204 kJ/mol.K for cadmium ions, respectively, which implies the exothermic and spontaneous nature of the adsorption. Also, the optimal empirical conditions for lead and cadmium ions have been found at a time of 60 min, temperature of 20 °C, initial concentration of 100 mg/L, and pH of 10. At a time of 45 min, the diffusion coefficient and mass transfer coefficient for lead ions have been calculated at 0.1269 × 1020 m2/s and 0.2028 × 1015 m/s, respectively. In addition, at a time of 45 min, the diffusion coefficient and mass transfer coefficient for cadmium ions have been calculated at 0.1463 × 1020 m2/s and 0.1054 × 1015 m/s, respectively. Moreover, the mechanism study explains that the C-O-C and C-H in the aromatic groups have a crucial aspect in the bond formation among metallic ions and resin.

The impact of chlorination on the tetracycline sorption behavior of microplastics in aqueous solution

Considering the large volumes of treated water and incomplete elimination of pollutants, wastewater treatment plants (WWTPs) remain a considerable source of microplastics (MPs). Chlorine, the most frequently used disinfectant in WWTPs, has a strong oxidizing impact on MPs. However, little is documented, to date, about the impact of chlorination on the transformation of MPs and the subsequent environmental behaviors of the chlorinated MPs when released into the aquatic environment. This study explored the response of the physicochemical properties of specific thermoplastics, namely polyurethane (TPU) MPs and polystyrene (PS) MPs, to chlorination and their emerging pollutant [tetracycline (TC)] adsorption behavior in aqueous solution. The results indicated that the O/C ratio of the MP surface did not significantly change, and that there were increases in the O-containing functional groups of the TPU and PS MPs, after chlorination. The surface area of the chlorinated TPU MPs increased by 45 %, and that of the chlorinated PS increased by 21 %, compared with the pristine ones, which contributed to the TC adsorption. The adsorption isotherm fitting parameters suggested that the chlorinated TPU fitted the multilayer adsorption, and the chlorinated PS was inclined to the monolayer adsorption. The relative abundance of the O-containing functional groups, on the TPU surface, led to the release of CHCl₃ molecules, and the clear surface irregularities and fissures occurred after chlorine treatment. No fissures were found on the surface of the chlorinated PS MPs. The hydrophobicity and electrostatic adsorption were proved to be the major impacts on the TC adsorption of the chlorinated MPs, and the subsequently formed hydrogen bonds led to the stronger adsorption capacity of the chlorinated TPU than the chlorinated PS MPs.

Ultrasound-promoted preparation of polyvinyl ferrocene-based electrodes for selective formate separation: Experimental design and optimization

The selective separation of ions is a major technological challenge having far-ranging impacts from product separation in electrochemical production of base chemicals from CO₂ to water purification. In recent years, ion-selective electrochemical systems leveraging redox-materials emerged as an attractive platform based on their reversibility and remarkable ion selectivity. In the present study, we present an ultrasound-intensified fabrication process for polyvinyl ferrocene (PVF)-functionalized electrodes in a carbon nanotube (CNT) matrix for selective electro-adsorption of formate ions. To this end, a response surface methodology involving the Box-Behnken design with three effective independent variables, namely, PVF to CNT ratio, sonication duration, and ultrasonic amplitude was applied to reach the maximum formate adsorption efficiency. The fabricated electrodes were characterized using cyclic voltammetry, X-ray diffraction, Raman spectroscopy, and scanning electron microscopy (SEM). SEM images revealed that an optimized ultrasonic amplitude and sonication time provided remarkable improvements in electrode morphology. Through a sedimentation study, we qualitatively demonstrate that the main optimized conditions improved PVF/CNT dispersion stability, consequently providing the highest number of active surface sites for adsorption and the highest adsorption efficiency. The highest percentage of active electrode surface sites and the maximum adsorption efficiency were 97.8 and 90.7% respectively at a PVF/CNT ratio of 3, ultrasonication time of one hour, and 50% ultrasonic amplitude.

Removal of microplastics and nanoplastics from urban waters: Separation and degradation

The omnipresent micro/nanoplastics (MPs/NPs) in urban waters arouse great public concern. To build a MP/NP-free urban water system, enormous efforts have been made to meet this goal via separating and degrading MPs/NPs in urban waters. Herein, we comprehensively review the recent developments in the separation and degradation of MPs/NPs in urban waters. Efficient MP/NP separation techniques, such as adsorption, coagulation/flocculation, flotation, filtration, and magnetic separation are first summarized. The influence of functional materials/reagents, properties of MPs/NPs, and aquatic chemistry on the separation efficiency is analyzed. Then, MP/NP degradation methods, including electrochemical degradation, advanced oxidation processes (AOPs), photodegradation, photocatalytic degradation, and biological degradation are detailed. Also, the effects of critical functional materials/organisms and operational parameters on degradation performance are discussed. At last, the current challenges and prospects in the separation, degradation, and further upcycling of MPs/NPs in urban waters are outlined. This review will potentially guide the development of next-generation technologies for MP/NP pollution control in urban waters.

Superhydrophobic 304 Stainless Steel Mesh for the Removal of High-Density Polyethylene Microplastics

Microplastics are a global issue that affects the environment, economy, as well as human health. Herein, we present a superhydrophobic 304 stainless steel mesh obtained by chemical etching followed by a liquid-phase deposition of lauric acid that can be used for microplastic removal. Field emission scanning electron microscopy (FE-SEM) and high-resolution X-ray photoelectron spectroscopy (HR-XPS), among other techniques, were used to identify the hierarchical structure and chemical composition of the surface. They revealed that iron laurate decreased the surface free energy. The 304 stainless steel mesh was superhydrophobic (169°) and superoleophilic (0°). Taking advantage of these wetting properties, we showed an innovative use of these superhydrophobic surfaces in the removal of microplastics. Additionally, we analyzed the removal efficiency from a surface and colloidal point of view that allowed us to explain and clarify why microplastics can also be removed by their wetting properties. The loss of a double electrostatic cloud between the microplastics and the predominance of van der Waals interactions in the organic phase promote the removal of these persistent pollutants from water.

Surface functionalized cellulose fibers - A renewable adsorbent for removal of plastic nanoparticles from water

Both micro- and nanoparticles of common plastic materials are considered as emerging pollutants with significant impact on the environment owing to large concentration, high stability and widespread distribution. To mitigate the risk of such pollutants, new methodologies for the detection and removal of plastic nanoparticles from the environment are needed. Here, a simple and effective method of using surface modified cellulose fibers for the removal of polymer nanoparticles from spiked water samples is discussed in detail. Almost quantitative (> 98%) removal of polymer nanoparticles and high adsorption efficiencies were obtained within 30 minutes. The mechanism of adsorption of polymer nanoparticles on the surface of PEI@CE fibers was monitored by Fourier transform infrared (FTIR) spectroscopy, kinetic studies, thermal analyses, changes in zeta potentials and scanning electron microscopy (SEM). The renewable adsorbent PEI@CE is a promising material for a wide range of applications owing to biodegradability, easy accessibility, and high extraction efficiencies.

Insights into Adsorption of Humic Substances on Graphitic Carbon Nitride

Graphitic carbon nitride (CN) has been widely used in environmental pollution remediation. However, the adsorption of organic compounds on CNs, which has practical significance for the environmental application of CNs, is poorly understood. For the first time, this study systematically investigated the adsorption behaviors and mechanisms of humic substances (HSs), i.e., humic acid (HA) and fulvic acid (FA), on CNs derived from four typical precursors. Intriguingly, CN derived from urea (CN-U) showed a great capacity for HS adsorption due to its porous structure and large surface area, with maximum adsorption amounts of 73.24 and 51.62 mgC/g for HA and FA, respectively. The formation, influencing factors, and relative contributions of multiple interactions to HS adsorption on CNs were thoroughly elucidated. HS adsorption on CNs was mainly mediated by electrostatic interactions, π-π interactions, and H-bonding. The dominance of electrostatic interactions resulted in HS adsorption being highly dependent on pH and ionic strength. HS components with high aromaticity and high molecular weight were preferentially adsorbed due to π-π interactions. These multiple interactions were largely affected by amino groups and tri-s-triazine units of CNs, as well as the moieties of aromatic rings and oxygen-containing groups of HSs.

Surface-functionalised materials for microplastic removal

Microplastic (MP) pollution is a matter of great concern attracting increasing attention due to its adverse effects on the environment. Different technologies and methodologies have been developed to remove these pollutants. Herein, we focus on a promising environmental solution that involves surface modification to change the wettability properties of MPs or solid materials by conferring superhydrophobicity and superoleophilicity to increase the selectivity for MP separation. Both processes can be used to selectively separate MPs because of the changes in the wettable properties of the MP or by changing the oil used in the case of superhydrophobic surfaces. We show two distinct methods based on changing the wettability properties of surfaces that could lead to innovative and environmental applications. We also discuss some of the challenges that need to be overcome.