Recyclable and Self-Repairable Fluid-Driven Liquid Crystal Elastomer Actuator

Halogen-Bonded Liquid Crystal Elastomers as Initiator-Free Photochemical Actuators

Photochemically driven liquid crystal elastomer (LCE) actuators require precise arrangement and sufficiently high concentration of photoswitchable molecules for effective actuation. Achieving both high photoswitch content and a high degree of molecular alignment has been challenging especially in thick samples, but is essential for future applications in soft robotics, biomedicine, and photonic technologies. In this work, this issue is addressed by combining dynamic halogen bonds with Aza-Michael addition-based polymerization, creating azobenzene-containing LCEs with multimodal actuation capabilities. These highly directional supramolecular interactions eliminate the need for a photo-initiator in the LCE fabrication process, enabling control over the azobenzene content over a wide range while maintaining a high degree of molecular alignment and dynamic programming ability. The potential of this approach is demonstrated through proof-of-concept examples such as light-guided rolling movement and underwater gripping, underscoring the versatility of the weak, dynamic halogen bonds in advancing the supramolecular design of multimodal soft actuators.

Hydrogen-Bonded Supramolecular Network Enabled Gentle Reprogramming of Liquid Crystal Elastomer toward Evolutionary Robot

In nature, many organisms augment chances of survival by reprogramming their structures to evolving environment, among which sea squirts being a prime example. Such reprogramming has been demonstrated in liquid crystal elastomer (LCE) actuator assembled with heat assistance. However, the required temperature being higher than the actuation temperature limits its application. Here, we reported a hydrogen-bonded supramolecular network LCE to construct soft modular and reprogrammable actuator by assembling with a gentle heat treatment. Leveraging the Michael addition reaction, we introduced hydrogen bonding to the LCE matrix with functionalized pyridine monomers. Experimental and molecular dynamics modeling proved the efficient dynamic hydrogen bond exchange at 60 °C, significantly lower than the actuating temperature of the LCE. This gave rise to the reversible and robust adhesion of the same collection of LCE modules capable of being built into different bilayers and performing various morphing upon a short thermal stimulation. Therefore, we demonstrated that these comparatively weak cross-links enabled reconfiguration of the LCE actuator. With the developed hydrogen-bonding LCEs, we built proof-of-concept modular reprogrammable robot, performing crawling, sailing, and microcircuit repair tasks. This bioinspired and efficient method for evolutionary LCE robot offers a viable path for further development of intelligent actuators sustainable in complex environments.

High-performance electrically responsive artificial muscle materials for soft robot actuation

Traditional robotic devices are often bulky and rigid, making it difficult for them to adapt to the soft and complex shapes of the human body. In stark contrast, soft robots, as a burgeoning class of robotic technology, showcase exceptional flexibility and adaptability, positioning them as compelling contenders for a diverse array of applications. High-performance electrically responsive artificial muscle materials (ERAMMs), as key driving components of soft robots, can achieve efficient motion and deformation, as well as more flexible and precise robot control, attracting widespread attention. This paper reviews the latest advancements in high-performance ERAMMs and their applications in the field of soft robot actuation, using ionic polymer-metal composites and dielectric elastomers as typical cases. Firstly, the definition, characteristics, and electro-driven working principles of high-performance ERAMMs are introduced. Then, the material design and synthesis, fabrication processes and optimization, as well as characterization and testing methods of the ERAMMs are summarized. Furthermore, various applications of two typical ERAMMs in the field of soft robot actuation are discussed in detail. Finally, the challenges and future directions in current research are analyzed and anticipated. This review paper aims to provide researchers with a reference for understanding the latest research progress in high-performance ERAMMs and to guide the development and application of soft robots. STATEMENT OF SIGNIFICANCE.

Phase patterning of liquid crystal elastomers by laser-induced dynamic crosslinking

Liquid crystal elastomers hold promise in various fields due to their reversible transition of mechanical and optical properties across distinct phases. However, the lack of local phase patterning techniques and irreversible phase programming has hindered their broad implementation. Here we introduce laser-induced dynamic crosslinking, which leverages the precision and control offered by laser technology to achieve high-resolution multilevel patterning and transmittance modulation. Incorporation of allyl sulfide groups enables adaptive liquid crystal elastomers that can be reconfigured into desired phases or complex patterns. Laser-induced dynamic crosslinking is compatible with existing processing methods and allows the generation of thermo- and strain-responsive patterns that include isotropic, polydomain and monodomain phases within a single liquid crystal elastomer film. We show temporary information encryption at body temperature, expanding the functionality of liquid crystal elastomer devices in wearable applications.

Untethered soft actuators for soft standalone robotics

Soft actuators produce the mechanical force needed for the functional movements of soft robots, but they suffer from critical drawbacks since previously reported soft actuators often rely on electrical wires or pneumatic tubes for the power supply, which would limit the potential usage of soft robots in various practical applications. In this article, we review the new types of untethered soft actuators that represent breakthroughs and discuss the future perspective of soft actuators. We discuss the functional materials and innovative strategies that gave rise to untethered soft actuators and deliver our perspective on challenges and opportunities for future-generation soft actuators.

A bio-inspired co-simulation crawling robot enabled by a carbon dot-doped dielectric elastomer

Flexible actuation materials play a crucial role in biomimetic robots. Seeking methods to enhance actuation and functionality is one of the directions in which actuators strive to meet the high-performance and diverse requirements of environmental conditions. Herein, by utilizing the method of adsorbing N-doped carbon dots (NCDs) onto SiO2 to form clusters of functional particles, a NCDs@SiO2/PDMS elastomer was prepared and its combined optical and electrical co-stimulation properties were effectively harnessed to develop a biomimetic crawling robot resembling Rhagophthalmus (firefly). The introduction of NCDs@SiO2 cluster particles not only effectively improves the mechanical and dielectric properties of the elastomer but also exhibits fluorescence response and actuation response under the co-stimulation of UV and electricity, respectively. Additionally, a hybrid dielectric elastomer actuator (DEA) with a transparent SWCNT mesh electrode exhibits two notable advancements: an 826% increase in out-of-plane displacement under low electric field stimulation compared to the pure matrix and the ability of NCDs to maintain a stable excited state within the polymer for an extended duration under UV-excitation. Simultaneously, the transparent biomimetic crawling robot can stealthily move in specific environments and fluoresce under UV light.

Reprogramming Photoresponsive Liquid Crystalline Elastomer via Force-Directed Evaporation

Incorporating photothermal agents into thermoresponsive liquid crystalline elastomers (LCEs) offers remote and spatio-temporal control in actuation. Typically, both the light responsiveness and actuation behaviors are fixed since the agent doping and mesogen alignment are conducted before network formation. Here, we report an approach that enables programming photoresponsive LCEs after synthesis via force-directed evaporation. Different photothermal agents can be doped or removed by swelling the fully cross-linked LCEs in a specific solution, achieving the introduction and erasing of the photoresponsiveness. Moreover, the network swelling deletes the registered alignment, which allows for redefining the molecular order via re-evaporating the solvent with force imposed. This "one stone, two birds" strategy paves the way to simultaneously program/reprogram the actuation mode and responsiveness of LCEs, even in a spatio-selective manner to achieve complex actuations. Our approach is expandable to three-dimensional (3D) printed LCEs to access geometrically sophisticated shape-changing.

Unlocking the potential of self-healing and recyclable ionic elastomers for soft robotics applications

In the field of soft robotics, current materials face challenges related to their load capacity, durability, and sustainability. Innovative solutions are required to address these problems beyond conventional strategies, which often lack long-term ecological viability. This study aims to overcome these limitations using mechanically robust, self-healing, and recyclable ionic elastomers based on carboxylated nitrile rubber (XNBR). The designed materials exhibited excellent mechanical properties, including tensile strengths (TS) exceeding 19 MPa and remarkable deformability, with maximum elongations (EB) over 650%. Moreover, these materials showed high self-healing capabilities, with 100% recovery efficiency of TS and EB at 110 °C after 3 to 5 h, and full recyclability, preserving their mechanical performance even after three recycling cycles. Furthermore, they were also moldable and readily scalable. Tendon-driven soft robotic grippers were successfully developed out of ionic elastomers, illustrating the potential of self-healing and recyclability in the field of soft robotics to reduce maintenance costs, increase material durability, and improve sustainability.

Programmable and Self-Healable Liquid Crystal Elastomer Actuators Based on Halogen Bonding

Shape-changing polymeric materials have gained significant attention in the field of bioinspired soft robotics. However, challenges remain in versatilizing the shape-morphing process to suit different tasks and environments, and in designing systems that combine reversible actuation and self-healing ability. Here, we report halogen-bonded liquid crystal elastomers (LCEs) that can be arbitrarily shape-programmed and that self-heal under mild thermal or photothermal stimulation. We incorporate halogen-bond-donating diiodotetrafluorobenzene molecules as dynamic supramolecular crosslinks into the LCEs and show that these relatively weak crosslinks are pertinent for their mechanical programming and self-healing. Utilizing the halogen-bonded LCEs, we demonstrate proof-of-concept soft robotic motions such as crawling and rolling with programmed velocities. Our results showcase halogen bonding as a promising, yet unexplored tool for the preparation of smart supramolecular constructs for the development of advanced soft actuators.

Tough and Photo-Plastic Liquid Crystal Elastomer with a 2-Fold Dynamic Linker for Artificial Muscles

Liquid crystal elastomers (LCEs) have been optimized by combining cross-linkers and dynamic bonds to achieve a reversible actuation behavior comparable to living skeletal muscles. In this study, one unique type of segment with 2-fold dynamic properties was introduced into LCEs, which offered not only dynamic diselenide covalent bonds for thermo-/photoplasticity but also H-bond arrays for dynamic cross-linking and mechanical robustness. Besides self-healing, self-welding, and recyclability, the LCEs were reprogrammable with elevated temperature or intensive visible light irradiation. The resultant LCEs gave an actuation blocking stress of 1.96 MPa and an elastic modulus of 14.4 MPa at 80 °C. The actuation work capacity reached 135.2 kJ m-3. When incorporating the Joule electrode or photothermal materials, the LCEs could be programmed as the electricity-driven and photothermal artificial muscles and thereby promised the application both as a biomimetic artificial hand and as an energy collector from sunlight. Thus, the 2-fold dynamic LCEs offered the pathway of enabling the reversible actuation behavior comparable to living skeletal muscles and promising applications in sustainable actuators, artificial muscles, and soft robots.

Thermal-Responsive Liquid Crystal Elastomer Foam-based Compressible and Omnidirectional Gripper

Liquid crystal elastomers (LCEs) are considered to be a promising material for the fabrication of soft grippers because of their large and reversible deformations, an LCE gripper with suitable compressibility and omnidirectionality has not yet been developed. To overcome these obstacles, this study utilizes salt template method to fabricate a rod-like LCE foam as gripper. The thickness of the compressible foam can be reduced by up to 77%, temporarily maintaining the deformation and enabling the gripper to pass through slits. The foam was aligned along the long axis and the length of the foam exhibits reversible thermal responsiveness and contract up to 57% along its alignment. Additionally, when the foam approaches a heat source, the generated temperature gradient results in a contraction gradient owing to the low thermal conductivity of the LCE foam. This in turn causes the foam to reversibly bend with a bending angle up to 93° and follow the movement of a heat source omnidirectionally. The developed gripper successfully grasps, moves, and releases hot objects in a cold and safe place, demonstrating its potential for emergency disposal. Thus, LCE foams can be considered suitable materials for novel gripper design and construction.

Bioinspired helical-artificial fibrous muscle structured tubular soft actuators

Biological tubular actuators show diverse deformations, which allow for sophisticated deformations with well-defined degrees of freedom (DOF). Nonetheless, synthetic active tubular soft actuators largely only exhibit few simple deformations with limited and undesignable DOF. Inspired by 3D fibrous architectures of tubular muscular hydrostats, we devised conceptually new helical-artificial fibrous muscle structured tubular soft actuators (HAFMS-TSAs) with locally tunable molecular orientations, materials, mechanics, and actuation via a modular fabrication platform using a programmable filament winding technique. Unprecedentedly, HAFMS-TSAs can be endowed with 11 different morphing modes through programmable regulation of their 3D helical fibrous architectures. We demonstrate a single "living" artificial plant rationally structured by HAFMS-TSAs exhibiting diverse photoresponsive behaviors that enable adaptive omnidirectional reorientation of its hierarchical 3D structures in the response to environmental irradiation, resembling morphing intelligence of living plants in reacting to changing environments. Our methodology would be significantly beneficial for developing sophisticated soft actuators with designable and tunable DOF.

Programmable Complex Shape Changing of Polysiloxane Main-Chain Liquid Crystalline Elastomers

Liquid crystal elastomers (LCEs) are shape-morphing materials whose large and reversible shape transformations are caused by the coupling between the mobile anisotropic properties of liquid crystal (LC) units and the rubber elastic of polymer networks. Their shape-changing behaviors under certain stimuli are largely directed by the LC orientation; therefore, various strategies have been developed to spatially modulate the LC alignments. However, most of these methods are limited as they require complex fabrication technologies or have intrinsic limitations in applicability. To address this issue, programmable complex shape changes in some LCE types, such as polysiloxane side-chain LCEs, thiol-acrylate main-chain LCEs, etc., were achieved by using a mechanical alignment programming process coupled with two-step crosslinking. Here, we report a polysiloxane main-chain LCE with programmable 2- and 3D shape-changing abilities that were created by mechanically programming the polydomain LCE with two crosslinking steps. The resulting LCEs exhibited a reversible thermal-induced shape transformation between the initial and programmed shapes due to the two-way memory between the first and second network structures. Our findings expand on the applications of LCE materials in actuators, soft robotics, and smart structures where arbitrary and easily programmed shape morphing is needed.

Bioinspired Liquid Crystalline Spinning Enables Scalable Fabrication of High-Performing Fibrous Artificial Muscles

Leveraging liquid crystal elastomers (LCEs) to realize scalable fabrication of high-performing fibrous artificial muscles is of particular interest because these active soft materials can provide large, reversible, programmable deformations upon environmental stimuli. High-performing fibrous LCEs require the used processing technology to enable shaping LCEs into micro-scale fine fibers as thin as possible while achieving macroscopic LC orientation, which however remains a daunting challenge. Here, a bioinspired spinning technology is reported that allows for continuous, high-speed production (fabrication speed up to 8400 m h^-1 ) of thin and aligned LCE microfibers combined with rapid deformation (actuation strain rate up to 810% s^-1 ), powerful actuation (actuation stress up to 5.3 MPa), high response frequency (50 Hz), and long cycle life (250 000 cycles without obvious fatigue). Inspired by liquid crystalline spinning of spiders that takes advantage of multiple drawdowns to thin and align their dragline silks, internal drawdown via tapered-wall-induced-shearing and external drawdown via mechanical stretching are employed to shape LCEs into long, thin, aligned microfibers with the desirable actuation performances, which few processing technologies can achieve. This bioinspired processing technology capable of scalable production of high-performing fibrous LCEs would benefit the development of smart fabrics, intelligent wearable devices, humanoid robotics, and other areas.

Magnetic-responsive Covalent Adaptable Networks

Covalent adaptable networks (CANs) are reprocessable polymers whose structural arrangement is based on the recombination of dynamic covalent bonds. Composite materials prepared by incorporating magnetic particles into CANs attract much attention due to their remote and precise control, fast response speed, high biological safety and strong penetration of magnetic stimuli. These properties often involve magnetothermal effect and direct magnetic-field guidance. Besides, some of them can also respond to light, electricity or pH values. Thus, they are favorable for soft actuators since various functions are achieved such as magnetic-assisted self-healing (heating or at ambient temperature), welding (on land or under water), shape-morphing, and so on. Although magnetic CANs just start to be studied in recent two years, their advances are promised to expand the practical applications in both cutting-edge academic and engineering fields. This review aims to summarize recent progress in magnetic-responsive CANs, including their design, synthesis and application.

Optical wavelength selective actuation of dye doped liquid crystalline elastomers by quasi-daylight

We explore obtaining different photo responses of liquid crystalline elastomer (LCE) materials through modulating the optical wavelengths in order to promote the development of precise photocontrol on LCE actuators, and thus study the effect of light-absorbing dyes with different absorption bands on the selective actuation of LCE materials. The dye-doped LCEs were prepared by incorporating special visible absorber dyes into thiol-acrylate main chain LCE (MC-LCE) matrices. The dyes showed photo actuation performance to LCEs due to the photothermal effects. But, every dye-doped LCE could be effectively actuated by light irradiation whose wavelength was inside its absorption band, but could not be effectively actuated by the light whose wavelength was beyond its absorption band. Wavelength selective actuation effects, no matter actuating deformation or actuating force, could be remarkably demonstrated by these dye-doped LCEs through filtering the same quasi-daylight source to be different wavelength bands. Our work opens up a significant way for the precise and convenient photo actuation of LCE actuators, while expanding the utilization potential of quasi-daylight, and further natural sunlight.

Photothermal modulated dielectric elastomer actuator for resilient soft robots

Soft robots need to be resilient to extend their operation under unpredictable environments. While utilizing elastomers that are tough and healable is promising to achieve this, mechanical enhancements often lead to higher stiffness that deteriorates actuation strains. This work introduces liquid metal nanoparticles into carboxyl polyurethane elastomer to sensitize a dielectric elastomer actuator (DEA) with responsiveness to electric fields and NIR light. The nanocomposite can be healed under NIR illumination to retain high toughness (55 MJ m−3) and can be recycled at lower temperatures and shorter durations due to nanoparticle-elastomer interactions that minimize energy barriers. During co-stimulation, photothermal effects modulate the elastomer moduli to lower driving electric fields of DEAs. Bilayer configurations display synergistic actuation under co-stimulation to improve energy densities, and enable a DEA crawler to achieve longer strides. This work paves the way for a generation of soft robots that achieves both resilience and high actuation performance.

Human-muscle-inspired single fibre actuator with reversible percolation

Artificial muscles are indispensable components for next-generation robotics capable of mimicking sophisticated movements of living systems. However, an optimal combination of actuation parameters, including strain, stress, energy density and high mechanical strength, is required for their practical applications. Here we report mammalian-skeletal-muscle-inspired single fibres and bundles with large and strong contractive actuation. The use of exfoliated graphene fillers within a uniaxial liquid crystalline matrix enables photothermal actuation with large work capacity and rapid response. Moreover, the reversible percolation of graphene fillers induced by the thermodynamic conformational transition of mesoscale structures can be in situ monitored by electrical switching. Such a dynamic percolation behaviour effectively strengthens the mechanical properties of the actuator fibres, particularly in the contracted actuation state, enabling mammalian-muscle-like reliable reversible actuation. Taking advantage of a mechanically compliant fibre structure, smart actuators are readily integrated into strong bundles as well as high-power soft robotics with light-driven remote control.

Magnetic vitrimer-based soft robotics

Magnetically responsive elastomers, consisting of elastomer embedded with magnetic particles, can produce fast and reversible actuation when subjected to a magnetic field. They have been extensively explored to construct versatile remotely controllable soft robots. Nevertheless, the magnetically induced actuation strain in elastomers is typically small, which limits its broad applications. Recently, magnetic particles have been mixed with viscous fluids to enable giant magnetically induced deformations. However, their response speed is slow and the actuation is usually irreversible. In this work, we have developed a magnetic vitrimer (MV), with magnetic particles mixed with the polymer network containing abundant dynamic covalent bonds. At room temperature, the MV behaves like a regular magnetically responsive elastomer. When the temperature is elevated to the exchange reaction temperature of the dynamic covalent bonds, the material behaves like a viscous magnetically responsive fluid, which can produce large deformations. The embedded magnetic particles and the vitrimer matrix also make the material self-healable without requiring any direct touch. We have demonstrated that with the guidance of an externally applied magnetic field, a MV-based soft robot can pass through a confined space, dramatically change its configuration, self-heal without any contact, catch, secure and release a fast-moving object, and move along a planned path.

A Proprioceptive Soft Robot Module Based on Supercoiled Polymer Artificial Muscle Strings

In this paper, a multi-functional soft robot module that can be used to constitute a variety of soft robots is proposed. The body of the soft robot module made of rubber is in the shape of a long strip, with cylindrical chambers at both the top end and bottom end of the module for the function of actuators and sensors. The soft robot module is driven by supercoiled polymer artificial muscle (SCPAM) strings, which are made from conductive nylon sewing threads. Artificial muscle strings are embedded in the chambers of the module to control its deformation. In addition, SCPAM strings are also used for the robot module’s sensing based on the linear relationship between the string’s length and their resistance. The bending deformation of the robot is measured by the continuous change of the sensor’s resistance during the deformation of the module. Prototypes of an inchworm-like crawling robot and a soft robotic gripper are made, whose crawling ability and grasping ability are tested, respectively. We envision that the proposed proprioceptive soft robot module could potentially be used in other robotic applications, such as continuum robotic arm or underwater robot.

Liquid Crystal Elastomer with Integrated Soft Thermoelectrics for Shape Memory Actuation and Energy Harvesting

Liquid crystal elastomers (LCEs) have attracted tremendous interest as actuators for soft robotics due to their mechanical and shape memory properties. However, LCE actuators typically respond to thermal stimulation through active Joule heating and passive cooling, which make them difficult to control. In this work, LCEs are combined with soft, stretchable thermoelectrics to create transducers capable of electrically controlled actuation, active cooling, and thermal-to-electrical energy conversion. The thermoelectric layers are composed of semiconductors embedded within a 3D printed elastomer matrix and wired together with eutectic gallium-indium (EGaIn) liquid metal interconnects. This layer is covered on both sides with LCE, which alternately heats and cools to achieve cyclical bending actuation in response to voltage-controlled Peltier activation. Moreover, the thermoelectric layer can harvest energy from thermal gradients between the two LCE layers through the Seebeck effect, allowing for regenerative energy harvesting. As demonstrations, first, closed-loop control of the transducer is performed to rapidly track a changing actuator position. Second, a soft robotic walker that is capable of walking toward a heat source and harvesting energy is introduced. Lastly, phototropic-inspired autonomous deflection of the limbs toward a heat source is shown, demonstrating an additional method to increase energy recuperation efficiency for soft systems.

Electrically Controlled Aquatic Soft Actuators with Desynchronized Actuation and Light-Mediated Reciprocal Locomotion

Soft-bodied aquatic invertebrates can overcome hydrodynamic resistance and display diverse locomotion modes in response to environmental cues. Exploring the dynamics of locomotion from bioinspired aquatic actuators will broaden the perspective of underwater manipulation of artificial systems in fluidic environments. Here, we report a multilayer soft actuator design based on a light-driven hydrogel and a laser-induced graphene (LIG) actuator, minimizing the effect of the time delay by a monolithic hydrogel-based system while maintaining shape-morphing functionality. Moreover, different time scales in the response of actuator materials enable a real-time desynchronization of energy inputs, holding great potential for applications requiring desynchronized stimulation. This hybrid design principle is ultimately demonstrated with a high-performance aquatic soft actuator possessing an underwater walking speed of 0.81 body length per minute at a relatively low power consumption of 3 W. When integrated with an optical sensor, the soft actuator can sense the variation in light intensity and achieve mediated reciprocal motion. Our proposed locomotion mechanism could inspire other multilayer soft actuators to achieve underwater functionalities at the same spatiotemporal scale. The underwater actuation platform could be used to study locomotion kinematics and control mechanisms that mimic the motion of soft-bodied aquatic organisms.

Liquid Crystal-Based Organosilicone Elastomers with Supreme Mechanical Adaptability

Elastomers with supreme mechanical adaptability where the increasing stress under continuous deformation is significantly inhibited within a large deformation zone, are highly desired in many areas, such as artificial muscles, flexible and wearable electronics, and soft artificial-intelligence robots. Such system comprises the advantages of recoverable elasticity and internal compensation to external mechanical work. To obtain elastomer with supreme mechanical adaptability, a novel liquid crystal-based organosilicon elastomer (LCMQ) is developed in this work, which takes the advantages of reversible strain-induced phase transition of liquid crystal units in polymer matrix and the recoverable nano-sized fillers. The former is responsible for the inhibition of stress increasing during deformation, where the external work is mostly compensated by internal phase transition, and the latter provides tunable and sufficient high tensile strength. Such LCMQs were synthesized with 4-methoxyphenyl 4-(but-3-en-1-yloxy)benzoate (MBB) grafted thiol silicone oil (crosslinker-g-MBB) as crosslinking agent, vinyl terminated polydimethylsiloxane as base adhesive, and fumed silica as reinforcing filler by two-step thiol-ene "click" reaction. The obtained tensile strength and the elongation at break are better than previously reported values. Moreover, the resulting liquid crystal elastomers exhibit different mechanical behavior from conventional silicone rubbers. When the liquid crystal content increases from 1% (w/w) to 4% (w/w), the stress plateau for mechanical adaptability becomes clearer. Moreover, the liquid crystal elastomer has no obvious deformation from 25 °C to 120 °C and is expected to be used in industrial applications. It also provides a new template for the modification of organosilicon elastomers.

High-Strength, Large-Deformation, Dual Cross-Linking Network Liquid Crystal Elastomers Based on Quadruple Hydrogen Bonds

Liquid crystal elastomers (LCEs) with large deformation under external stimuli have attracted extensive attention in various applications such as soft robotics, 4D printing, and biomedical devices. However, it is still a great challenge to reduce the damage to collimation and enhance the mechanical and actuation properties of LCEs simultaneously. Here, we construct a new method of a double cross-linking network structure to improve the mechanical properties of LCEs. The ureidopyrimidinone (UPy) group with quadruple hydrogen bonds was used as the physical cross-linking unit, and pentaerythritol tetra(3-mercaptopropionate) was used as the chemical cross-link. The LCEs showed a strong mechanical tensile strength of 8.5 MPa and excellent thermally induced deformation (50%). In addition, the introduction of quadruple hydrogen bonds endows self-healing ability to extend the service life of LCEs. This provides a generic strategy for the fabrication of high-strength LCEs, inspiring the development of actuators and artificial muscles.

Phase-transforming metamaterial with magnetic interactions

Material phase transitions offer promise for driving motion and managing high-rate energy transfer events; however, engineering conventional phase transitions at a molecular or atomic level is challenging. We overcome this challenge by coupling multiple interacting fields within a metamaterial framework. Specifically, we embed magnetic domains, with nonlinear, orientationally dependent force interactions, within elastic structures to control reversible phase transitions and program high–strain-rate deformation. The resulting high-rate energy transformations are used to enhance elastic recoil, which could be used to drive high-power motion and to quickly dampen impact loading events. The developed Landau free energy–based model for this material system broadens the impact of this advance, setting the stage for metamaterials with wide-ranging compositions, interacting fields, and engineered properties.

Solid–solid phase transformations can affect energy transduction and change material properties (e.g., superelasticity in shape memory alloys and soft elasticity in liquid crystal elastomers). Traditionally, phase-transforming materials are based on atomic- or molecular-level thermodynamic and kinetic mechanisms. Here, we develop elasto-magnetic metamaterials that display phase transformation behaviors due to nonlinear interactions between internal elastic structures and embedded, macroscale magnetic domains. These phase transitions, similar to those in shape memory alloys and liquid crystal elastomers, have beneficial changes in strain state and mechanical properties that can drive actuations and manage overall energy transduction. The constitutive response of the elasto-magnetic metamaterial changes as the phase transitions occur, resulting in a nonmonotonic stress–strain relation that can be harnessed to enhance or mitigate energy storage and release under high–strain-rate events, such as impulsive recoil and impact. Using a Landau free energy–based predictive model, we develop a quantitative phase map that relates the geometry and magnetic interactions to the phase transformation. Our work demonstrates how controllable phase transitions in metamaterials offer performance capabilities in energy management and programmable material properties for high-rate applications.

Processing of Self-Healing Polymers for Soft Robotics

Soft robots are, due to their softness, inherently safe and adapt well to unstructured environments. However, they are prone to various damage types. Self-healing polymers address this vulnerability. Self-healing soft robots can recover completely from macroscopic damage, extending their lifetime. For developing healable soft robots, various formative and additive manufacturing methods have been exploited to shape self-healing polymers into complex structures. Additionally, several novel manufacturing techniques, noted as (re)assembly binding techniques that are specific to self-healing polymers, have been created. Herein, the wide variety of processing techniques of self-healing polymers for robotics available in the literature is reviewed, and limitations and opportunities discussed thoroughly. Based on defined requirements for soft robots, these techniques are critically compared and validated. A strong focus is drawn to the reversible covalent and (physico)chemical cross-links present in the self-healing polymers that do not only endow healability to the resulting soft robotic components, but are also beneficial in many manufacturing techniques. They solve current obstacles in soft robots, including the formation of robust multi-material parts, recyclability, and stress relaxation. This review bridges two promising research fields, and guides the reader toward selecting a suitable processing method based on a self-healing polymer and the intended soft robotics application.

Progress in Utilizing Dynamic Bonds to Fabricate Structurally Adaptive Self-Healing, Shape Memory, and Liquid Crystal Polymers

Stimuli-responsive structurally dynamic polymers are capable of mimicking the biological systems to adapt themselves to the surrounding environmental changes and subsequently exhibiting a wide range of responses ranging from self-healing to complex shape-morphing. Dynamic self-healing polymers (SHPs), shape-memory polymers (SMPs) and liquid crystal elastomers (LCEs), which are three representative examples of stimuli-responsive structurally dynamic polymers, have been attracting broad and growing interest in recent years because of their potential applications in the fields of electronic skin, sensors, soft robots, artificial muscles, and so on. We review recent advances and challenges in the developments towards dynamic SHPs, SMPs and LCEs, focusing on the chemistry strategies and the dynamic reaction mechanisms that enhance the performances of the materials including self-healing, reprocessing and reprogramming. We compare and discuss the different dynamic chemistries and their mechanisms on the enhanced functions of the materials, where three summary tables are presented: a library of dynamic bonds and the resulting characteristics of the materials. Finally, we provide a critical outline of the unresolved issues and future perspectives on the emerging developments. This article is protected by copyright. All rights reserved.

Mechanochromic, Shape-Programmable and Self-Healable Cholesteric Liquid Crystal Elastomers Enabled by Dynamic Covalent Boronic Ester Bonds

Endowing a cholesteric liquid crystal elastomer (CLCE) exhibiting helicoidal nanostructure with dynamically tailorable functionalities is of paramount significance for its emerging applications in diverse fields such as adaptive optics and soft robotics. Here, a mechanochromic, shape-programmable and self-healable CLCE is judiciously designed and synthesized through integrating dynamic covalent boronic ester bonds into the main-chain CLCE polymer network. The circularly polarized reflection of CLCEs can be reversibly and dynamically tuned across the entire visible spectrum by mechanical stretching. Thanks to the introduction of dynamic boronic ester bonds, the CLCEs were found to show robust reprogrammable and self-healing capabilities. The research disclosed herein can provide new insights into the development of 4D (color and 3D shape) programmable photonic actuators towards bioinspired camouflage, adaptive optical systems, and next-generation intelligent machines.

Light-Driven Linear Inchworm Motor Based on Liquid Crystal Elastomer Actuators Fabricated with Rubbing Overwriting

Linear displacement is used for positioning and scanning, e.g., in robotics at different scales or in scientific instrumentation. Most linear motors are either powered by rotary drives or are driven directly by pressure, electromagnetic forces or a shape change in a medium, such as piezoelectrics or shape-memory materials. Here, we present a centimeter-scale light-powered linear inchworm motor, driven by two liquid crystal elastomer (LCE) accordion-like actuators. The rubbing overwriting technique was used to fabricate the LCE actuators, made of elastomer film with patterned alignment. In the linear motor, a scanned green laser beam induces a sequence of travelling deformations in a pair of actuators that move a gripper, which couples to a shaft via friction moving it with an average speed in the order of millimeters per second. The prototype linear motor demonstrates how LCE light-driven actuators with a limited stroke can be used to drive more complex mechanisms, where large displacements can be achieved, defined only by the technical constrains (the shaft length in our case), and not by the limited strain of the material. Inchworm motors driven by LCE actuators may be scaled down to sub-millimeter size and can be used in applications where remote control and power supply with light, either delivered in free space beams or via fibers, is an advantage.

Liquid Crystal Elastomers with Enhanced Directional Actuation to Electric Fields

The integration of soft, stimuli-responsive materials in robotic systems is a promising approach to introduce dexterous and delicate manipulation of objects. Electrical control of mechanical response offers many benefits in robotic systems including the availability of this energy input, the associated response time, magnitude of actuation, and opportunity for self-regulation. Here, a materials chemistry is detailed to prepare liquid crystal elastomers (LCEs) with a 14:1 modulus contrast and increase in dielectric constant to enhance electromechanical deformation. The inherent modulus contrast of these LCEs (when coated with compliant electrodes) directly convert an electric field to a directional expansion of 20%. The electromechanical response of LCE actuators is observed upon application of voltage ranging from 0.5 to 6 kV. The deformation of these materials is rapid, reaching strain rates of 18% s^-1 . Upon removal of the electric field, little hysteresis is observed. Patterning the spatial orientation of the nematic director of the LCEs results in a 2D-3D shape transformation to a cone 8 mm in height. Individual and sequential addressing of an array of LCE actuators is demonstrated as a haptic surface.

Electrospun liquid crystal elastomer microfiber actuator

Fibers capable of generating axial contraction are commonly seen in nature and engineering applications. Despite the broad applications of fiber actuators, it is still very challenging to fabricate fiber actuators with combined large actuation strain, fast response speed, and high power density. Here, we report the fabrication of a liquid crystal elastomer (LCE) microfiber actuators using a facile electrospinning technique. Owing to the extremely small size of the LCE microfibers, they can generate large actuation strain (~60 percent) with a fast response speed (<0.2 second) and a high power density (400 watts per kilogram), resulting from the nematic-isotropic phase transition of liquid crystal mesogens. Moreover, no performance degradation is detected in the LCE microfibers after 10⁶ cycles of loading and unloading with the maximum strain of 20 percent at high temperature (90 degree Celsius). The small diameter of the LCE microfiber also results in a self-oscillatory behavior in a steady temperature field. In addition, with a polydopamine coating layer, the actuation of the electrospun LCE microfiber can be precisely and remotely controlled by a near-infrared laser through photothermal effect. Using the electrospun LCE microfiber actuator, we have successfully constructed a microtweezer, a microrobot, and a light-powered microfluidic pump.

3D printable and fringe electric field adhesion enabled variable stiffness artificial muscles for semi-active vibration attenuation

Soft robots are able to generate large and compliant deformation in an unconstructed environment, but their operation capability is limited by low stiffness. Thus, developing the function of variable stiffness while preserving its compliance is a challenging issue. This study proposes a new variable stiffness artificial muscle, as a complementary component for soft robots, using the principle of fringe electric field adhesion. Taking inspiration from the mechanism of multi-layer structures in biological muscles, the artificial muscle is composed of patterned conductive layers and interlayers and is 3D printable by direct ink writing (DIW). To further demonstrate the application, a vibration absorber by stacking this artificial muscle is proposed, whose natural frequency is tunable by the varying stiffness. The advantages of the fringe electric field-enabled variable stiffness (FEVS) artificial muscles include lightweight and irrelevance of the stiffness to the thickness of the interlayer, which can be beneficial to soft robots to achieve variable stiffness and semi-active vibration attenuation without extra weighting load.

Healable and Rearrangeable Networks of Liquid Crystal Elastomers Enabled by Diselenide Bonds

Based on liquid crystal elastomer (LCE) materials, hierarchically structured soft actuators can meet some requirements for "human-friendly" working mode and execute complex tasks with intelligent adaptation to environmental changes. However, few researchers have paid much attention to the preparation methods of multicomponent/hierarchical LCE actuators. In this communication, we demonstrate the successful integration of an exchangeable diselenide chain extender for the preparation of dynamic LCEs, which could be reprogrammed on heating or under visible light illumination. Moreover, the rearrangeable polydiselenide networks could be applied to develop the self-welding technology toward fabricating hierarchically structured LCE actuators with sophisticated deformability without using any auxiliary reagent (adhesive, tape, catalysts or initiator) during the assembling process.

Temperature-Responsive Multistable Metamaterials

The ability for materials to adapt their shape and mechanical properties to the local environment is useful in a variety of applications, from soft robots to deployable structures. In this work, we integrate liquid crystal elastomers (LCEs) with multistable structures to allow autonomous reconfiguration in response to local changes in temperature. LCEs are incorporated in a kirigami-inspired system in which squares are connected at their vertices by small hinges composed of LCE-silicone bilayers. These bend and soften as the temperature increases above room temperature. By choosing geometric parameters for the hinges such that bifurcation points in the stability exist, a transition from mono- or tristability to bistability can be triggered by a sufficient increase in temperature, forcing rearrangements of the structure as minima in the energy landscape are removed. We demonstrate temperature-induced propagation of transition waves, enabling local structural changes to autonomously propagate and affect other parts of the structure. These effects could be harnessed in applications in interface control, reconfigurable structures, and soft robotics.

Toward Application of Liquid Crystalline Elastomer for Smart Robotics: State of the Art and Challenges

Liquid crystalline elastomers (LCEs) are lightly crosslinked polymers that combine liquid crystalline order and rubber elasticity. Owing to their unique anisotropic behavior and reversible shape responses to external stimulation (temperature, light, etc.), LCEs have emerged as preferred candidates for actuators, artificial muscles, sensors, smart robots, or other intelligent devices. Herein, we discuss the basic action, control mechanisms, phase transitions, and the structure-property correlation of LCEs; this review provides a comprehensive overview of LCEs for applications in actuators and other smart devices. Furthermore, the synthesis and processing of liquid crystal elastomer are briefly discussed, and the current challenges and future opportunities are prospected. With all recent progress pertaining to material design, sophisticated manipulation, and advanced applications presented, a vision for the application of LCEs in the next generation smart robots or automatic action systems is outlined.

Amplifying and Leveraging Generated Force Upon Heating and Cooling in SMA Knitted Actuators

This work reexamines traditional shape memory alloy (SMA) loading paths commonly used in SMA-based actuator applications and presents a novel, superimposed condition in which SMA generates substantial forces upon heating and cooling. This atypical effect, which is investigated with a textile-based actuator, was found to be prominent at the completion of material phase transformation, at which point thermal expansion/contraction became the dominant force-generating mechanism. We demonstrate that amplification of generated forces can be accomplished by varying the applied thermal load, applied structural strain, as well as actuator architecture. Specifically, we present SMA knitted actuators as an actuator architecture that increases the effect by aggregating SMA wires within a complex strain profile-effectively providing a larger operational window for the effect to propagate. The amplification of blocking forces through this novel operational procedure suggests reconsidering traditional blocking force design paradigms and opens untapped actuator application spaces, such as the highlighted medical and aerospace wearable technologies.