Thermal Defect Engineering of Precious Group Metal-Organic Frameworks: A Case Study on Ru/Rh-HKUST-1 Analogues

Computational design of metal hydrides on a defective metal-organic framework HKUST-1 for ethylene dimerization

Catalytic ethylene dimerization to 1-butene is a crucial reaction in the chemical industry, as 1-butene is used for the production of most common plastics (e.g., polyethylene). With well-defined tuneable structures and unsaturated active sites, defective metal-organic frameworks have recently emerged as potential catalysts for ethylene dimerization. Herein, we computationally design a series of metal hydrides on defective HKUST-1 namely H-M-DHKUST-1 (M: Co, Ni, Cu, Ru, Rh and Pd), and subsequently assess their catalytic activity for ethylene dimerization by density functional theory calculations. Due to the antiferromagnetic behavior of dimeric metal-based clusters, we comprehensively investigate all possible multiplicity states on H-M-DHKUST-1 and observe multiplicity crossing. The ground-state reaction barriers for four elementary steps (initiation, C-C coupling, β-hydride elimination and 1-butene desorption) are rationalized and C-C coupling is revealed to be the rate-determining step on H-Co-, H-Ni-, H-Ru-, H-Rh- and H-Pd-DHKUST-1. The energy barrier for β-hydride elimination is found to be the lowest on H-Ru- and H-Rh-DHKUST-1, attributed to the weak stability of agostic arrangement; however, the energy barrier for 1-butene desorption is the highest on H-Rh-DHKUST-1. Among the designed H-M-DHKUST-1, Co- and Ni-based ones are predicted to exhibit the best overall catalytic performance. The mechanistic insights from this study may facilitate the development of new MOFs toward efficient ethylene dimerization and other industrially important reactions.

f-block MOFs: A Pathway to Heterometallic Transuranics

A novel series of heterometallic f-block-frameworks including the first examples of transuranic heterometallic ²³⁸ U/²³⁹ Pu-metal-organic frameworks (MOFs) and a novel monometallic ²³⁹ Pu-analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)-MOF formation and reported the first value of a U-to-Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid-state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An-integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An-containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.

Enhanced catalytic activity of MOF-74 via providing additional open metal sites for cyanosilylation of aldehydes

The preparation of metal-organic frameworks (MOFs) having many open metal sites is an excellent approach for the development of highly active MOF-based catalysts. Herein, well-defined rice-shaped MOF-74 microparticles having structural defects are prepared by incorporating two analogous organic linkers [2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) and 2-hydroxy-1,4-benzenedicarboxylic acid (HBDC)] within the MOF-74 structure. The replacement of some of DHBDC in MOF-74 by HBDC causes the structural defects (excluding some of the bridged hydroxyl groups), and these structural defects provide the additional open metal sites within MOF-74. Finally, the additional open metal sites within MOF-74 result in the enhanced catalytic activity for the cyanosilylation of several aldehydes. A series of MOF-74s is prepared with various incorporated amounts of HBDC, and the optimum ratio between DHBDC and HBDC in MOF-74 to achieving the best catalytic performance is determined. In addition, the defected MOF-74 displays an excellent recyclability for the catalytic reaction.

Defects engineering simultaneously enhances activity and recyclability of MOFs in selective hydrogenation of biomass

The development of synthetic methodologies towards enhanced performance in biomass conversion is desirable due to the growing energy demand. Here we design two types of Ru impregnated MIL-100-Cr defect engineered metal-organic frameworks (Ru@DEMOFs) by incorporating defective ligands (DLs), aiming at highly efficient catalysts for biomass hydrogenation. Our results show that Ru@DEMOFs simultaneously exhibit boosted recyclability, selectivity and activity with the turnover frequency being about 10 times higher than the reported values of polymer supported Ru towards D-glucose hydrogenation. This work provides in-depth insights into (i) the evolution of various defects in the cationic framework upon DLs incorporation and Ru impregnation, (ii) the special effect of each type of defects on the electron density of Ru nanoparticles and activation of reactants, and (iii) the respective role of defects, confined Ru particles and metal single active sites in the catalytic performance of Ru@DEMOFs for D-glucose selective hydrogenation as well as their synergistic catalytic mechanism.

The catalytic performance of metal‒organic frameworks can be tuned by introducing defects in their structure. Here, the authors introduce defects and impregnate ruthenium nanoparticles in cationic metal-organic frameworks, which enables enhanced recyclability and catalytic performance in D-glucose hydrogenation.

Rhodium-Based Metal-Organic Polyhedra Assemblies for Selective CO2 Photoreduction

Heterogenization of molecular catalysts via their immobilization within extended structures often results in a lowering of their catalytic properties due to a change in their coordination sphere. Metal-organic polyhedra (MOP) are an emerging class of well-defined hybrid compounds with a high number of accessible metal sites organized around an inner cavity, making them appealing candidates for catalytic applications. Here, we demonstrate a design strategy that enhances the catalytic properties of dirhodium paddlewheels heterogenized within MOP (Rh-MOP) and their three-dimensional assembled supramolecular structures, which proved to be very efficient catalysts for the selective photochemical reduction of carbon dioxide to formic acid. Surprisingly, the catalytic activity per Rh atom is higher in the supramolecular structures than in its molecular sub-unit Rh-MOP or in the Rh-metal-organic framework (Rh-MOF) and yields turnover frequencies of up to 60 h^-1 and production rates of approx. 76 mmole formic acid per gram of the catalyst per hour, unprecedented in heterogeneous photocatalysis. The enhanced catalytic activity is investigated by X-ray photoelectron spectroscopy and electrochemical characterization, showing that self-assembly into supramolecular polymers increases the electron density on the active site, making the overall reaction thermodynamically more favorable. The catalyst can be recycled without loss of activity and with no change of its molecular structure as shown by pair distribution function analysis. These results demonstrate the high potential of MOP as catalysts for the photoreduction of CO₂ and open a new perspective for the electronic design of discrete molecular architectures with accessible metal sites for the production of solar fuels.

The mechanism of MOF as the heterogeneous catalyst for propene hydroformylation: The DFT study

Metal-organic framework which was composed of metal center and organic linkers possessing the similar structure with the homogeneous metal-complex catalyst for hydroformylation, thus it could be potentially used as the...

Strategies for induced defects in metal-organic frameworks for enhancing adsorption and catalytic performance

Metal-organic frameworks (MOFs) have emerged among porous materials. The designable structure and specific functionality make them stand out for diverse applications. In conceptual MOF, the metal ions/clusters and organic ligands...

A MOF Multifunctional Cargo Vehicle for Reactive Gas Delivery and Catalysis

Efficient delivery of reactive and toxic gaseous reagents to organic reactions was studied using metal-organic frameworks (MOFs). Simultaneous cargo vehicle and catalytic capabilities of several MOFs were probed for the first time using the examples of  aromatization, aminocarbonylation, and carbonylative Suzuki-Miyaura coupling reactions. These reactions highlight that MOFs can serve a dual role as a gas cargo vehicle and a catalyst,  leading to product formation with yields similar to reactions employing pure gases. Furthermore, the MOFs can be recycled without sacrificing product yield, while simultaneously maintaining crystallinity. The reported findings were supported crystallographically and spectroscopically (e.g.,  diffuse reflectance infrared Fourier transform spectroscopy), foreshadowing a pathway for the development of multifunctional MOF-based reagent-catalyst cargo vessels for reactive reagents, as an attractive alternative to the use of toxic pure gases or gas generators.

Scrutinizing ligand exchange reactions in the formation of the precious group metal-organic framework RuII,II-HKUST-1: the impact of diruthenium tetracarboxylate precursor and modulator choice

The precious group metal (PGM) analogues of the iconic metal-organic framework [Cu3(BTC)2] (HKUST-1; BTC = 1,3,5 benzenetricarboxylate) still represent a synthetic challenge, especially if targeting the univalent and ideally defect-free RuII,II variant. Herein we present a systematic study employing the controlled secondary building unit approach (CSA) by using a variety of diruthenium tetracarboxylate complexes [Ru2(RCO2)4] as precursors in the synthesis of univalent Ru-HKUST-1 samples. Carboxylate ligand exchange test reactions suggest the importance of a pKa match between precursor ligand and BTC linker. For example, l-mandelate substituted precursors resulted in the most "perfect" samples of the investigated series with a fourfold increase in crystalline domain sizes compared to the established acetate route (according to PXRD and HR-TEM), high compositional purity (FT-IR, Raman, TGA and elemental analysis) and feature a so far unprecedentedly high BET surface area of 1789 m2 g-1 with the expected pore size distribution and total pore volume all similar to the ideal HKUST-1 parent structure.

Thermal defect engineering of precious group metal–organic frameworks: impact on the catalytic cyclopropanation reaction

This work highlights the catalytic cyclopropanation and its characteristics as a novel analytical tool to investigate complex MOF structures.