Incorporation of Core-Shell-Structured Zwitterionic Carbon Dots in Thin-Film Nanocomposite Membranes for Simultaneously Improved Perm-Selectivity and Antifouling Properties

Intercalation of carbon quantum dots into the selective layer of water softening membranes for improved performance and antifouling properties

Nanofiltration contributes to water softening by the exclusion of multi-valent hardness ions, through size exclusion mechanisms. Hardness reduction can be enhanced by the addition of positive charges to the selective layer, to take advantage of repulsive electrostatic interactions. However, there are two common drawbacks to this approach: the alteration of the permeability/selectivity trade-off and the increased fouling propensity of positively charged membranes towards negatively charged organic foulants, which should be overcome for effective membrane utilization. To overcome this, positively charged aminated carbon quantum dots (CQDs) were incorporated into a positively charged selective layer to maintain selectivity against metal cations. CQDs incorporation improved membrane hydrophilicity, affected pore size distribution and molecular weight cut-off and smoothed the surface of the selective layer. As a result, membrane permeance increased by 2.3 times, up to 12 l/(m2·bar·h), compared to the pure membrane, while the positive surface charge contributed to maintaining high rejection rates for double charged cations: 92.6 % for MgCl₂ and 88.5 % for CaCl₂, and with a slight reduction of NaCl rejection from 56.5 % to 49 %. The fabricated membranes were tested for softening feed solutions simulating realistic brackish water and seawater compositions. For brackish water with total dissolved solids up to 6000 ppm, the rejection rates for Mg2+ and Ca2+ ions exceeded 93 % and 87 %, respectively, achieving total water hardness removal higher than 90 % and a Mg2+/Na+ separation factor up to 14, which can be utilized for pretreatment of brackish and sea water before the RO desalination process. Furthermore, the modification enhanced membrane antifouling properties due to improved membrane hydrophilicity and reduced surface roughness. In summary, incorporating aminated positive CQDs is an effective method for enhancing the characteristics of positively charged nanofiltration membranes for water softening as pretreatment for brackish water and seawater desalination.

Recent Developments in Nanocomposite Membranes Based on Carbon Dots

Carbon dots (CDs) have aroused colossal attention in the fabrication of nanocomposite membranes ascribed to their ultra-small size, good dispersibility, biocompatibility, excellent fluorescence, facile synthesis, and ease of functionalization. Their unique properties could significantly improve membrane performance, including permeance, selectivity, and antifouling ability. In this review, we summarized the recent development of CDs-based nanocomposite membranes in many application areas. Specifically, we paid attention to the structural regulation and functionalization of CDs-based nanocomposite membranes by CDs. Thus, a detailed discussion about the relationship between the CDs' properties and microstructures and the separation performance of the prepared membranes was presented, highlighting the advantages of CDs in designing high-performance separation membranes. In addition, the excellent optical and electric properties of CDs enable the nanocomposite membranes with multiple functions, which was also presented in this review.

Membrane modification with carbon nanomaterials for fouling mitigation: A review

This paper provides a comprehensive overview of recent advancements in membrane modification for fouling mitigation in various water treatment processes, employing carbon nanomaterials such as fullerenes, nanodiamonds, carbon quantum dots, carbon nanotubes, and graphene oxide. Currently, using different carbon nanomaterials for polymeric membrane fouling mitigation is at various stages: CNT-modified membranes have been studied for more than ten years and have already been tested in pilot-scale setups; tremendous attention has been paid to utilizing graphene oxide as a modifying agent, while the research on carbon quantum dots' influence on the membrane antifouling properties is in the early stages. Given the intricate nature of fouling as a colloidal phenomenon, the review initially delves into the factors influencing the fouling process and explores strategies to address it. The diverse chemistry and antibacterial properties of carbon nanomaterials make them valuable for mitigating scaling, colloidal, and biofouling. This review covers surface modification of existing membranes using different carbon materials, which can be implemented as a post-treatment procedure during membrane fabrication. Creating mixed-matrix membranes by incorporating carbon nanomaterials into the polymer matrix requires the development of new synthetic procedures. Additionally, it discusses promising strategies to actively suppress fouling through external influences on modified membranes. In the concluding section, the review compares the effectiveness of carbon materials of varying dimensions and identifies key characteristics influencing the antifouling properties of membranes modified with carbon nanomaterials.

The coming of age of water channels for separation membranes: from biological to biomimetic to synthetic

Water channels are one of the key pillars driving the development of next-generation desalination and water treatment membranes. Over the past two decades, the rise of nanotechnology has brought together an abundance of multifunctional nanochannels that are poised to reinvent separation membranes with performances exceeding those of state-of-the-art polymeric membranes within the water-energy nexus. Today, these water nanochannels can be broadly categorized into biological, biomimetic and synthetic, owing to their different natures, physicochemical properties and methods for membrane nanoarchitectonics. Furthermore, against the backdrop of different separation mechanisms, different types of nanochannel exhibit unique merits and limitations, which determine their usability and suitability for different membrane designs. Herein, this review outlines the progress of a comprehensive amount of nanochannels, which include aquaporins, pillar[5]arenes, I-quartets, different types of nanotubes and their porins, graphene-based materials, metal- and covalent-organic frameworks, porous organic cages, MoS₂, and MXenes, offering a comparative glimpse into where their potential lies. First, we map out the background by looking into the evolution of nanochannels over the years, before discussing their latest developments by focusing on the key physicochemical and intrinsic transport properties of these channels from the chemistry standpoint. Next, we put into perspective the fabrication methods that can nanoarchitecture water channels into high-performance nanochannel-enabled membranes, focusing especially on the distinct differences of each type of nanochannel and how they can be leveraged to unlock the as-promised high water transport potential in current mainstream membrane designs. Lastly, we critically evaluate recent findings to provide a holistic qualitative assessment of the nanochannels with respect to the attributes that are most strongly valued in membrane engineering, before discussing upcoming challenges to share our perspectives with researchers for pathing future directions in this coming of age of water channels.

Thin Film Polyamide Nanocomposite Membrane Decorated by Polyphenol-Assisted Ti3C2Tx MXene Nanosheets for Reverse Osmosis

Transition-metal carbides (MXenes), multifunctional 2D materials, have caught the interest of researchers in the fabrication of high-performance nanocomposite membranes. However, several issues regarding MXenes still remain unresolved, including low ambient stability; facile restacking and agglomeration; and poor compatibility and processability. To address the aforementioned challenges, we proposed a facile, green, and cost-efficient approach for coating a stable layer of plant-derived polyphenol tannic acid (TA) on the surface of MXene (Ti₃C₂T_x) nanosheets. Then, high-performance reverse osmosis polyamide thin film nanocomposite (RO-PA-TFN) membranes were fabricated by the incorporation of modified MXene (Ti₃C₂T_x-TA) nanosheets in the polyamide selective layer through interfacial polymerization. The strong negative charge and hydrophilic multifunctional properties of TA not only boosted the chemical compatibility between Ti₃C₂T_x MXene nanosheets and the polyamide matrix to overcome the formation of nonselective voids but also generated a tight network with selective interfacial pathways for efficient monovalent salt rejection and water permeation. In comparison to the neat thin film composite membrane, the optimum TFN (Ti₃C₂T_x-TA) membrane with a loading of 0.008 wt % nanofiller revealed a 1.4-fold enhancement in water permeability, a well-maintained high NaCl rejection rate of 96% in a dead-end process, and enhanced anti-fouling tendency. This research offers a facile way for the development of modified MXene nanosheets to be successfully integrated into the polyamide-selective layer to improve the performance and fouling resistance of TFN membranes.

Smart Self-Cleaning Membrane via the Blending of an Upper Critical Solution Temperature Diblock Copolymer with PVDF

Poly(2,2,2-trifluoroethyl methacrylate)-b-poly(imidazoled glycidyl methacrylate-co-diethylene glycol methyl ether methacrylate) (PTFEMA-b-P(iGMA-co-MEO₂MA)) containing an upper critical solution temperature (UCST) polymer chain was prepared and blended with poly(vinylidene fluoride) (PVDF) to produce a thermoresponsive membrane with smart self-cleaning performance. The successful preparation of the membrane was demonstrated by attenuated total reflection-Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy characterization. The membrane shows UCST performance, and its flux changes with the filtrate temperature as the UCST polymer chain stretches out and contracts in response to various temperatures. In addition, the UCST polymer chain can disrupt the foulant and push it away from the membrane when the temperature is above the UCST and thus enables membranes to exhibit a smart self-cleaning behavior. To the best of our knowledge, this work is the first report of a smart self-cleaning membrane based on the blending of a diblock copolymer containing a UCST polymer chain with PVDF.

Emerging Materials to Prepare Mixed Matrix Membranes for Pollutant Removal in Water

Various pollutants of different sizes are directly (e.g., water-borne diseases) and indirectly (e.g., accumulation via trophic transfer) threatening our water health and safety. To cope with this matter, multifaceted approaches are required for advanced wastewater treatment more efficiently. Wastewater treatment using mixed matrix membranes (MMMs) could provide an excellent alternative since it could play two roles in pollutant removal by covering adsorption and size exclusion of water contaminants simultaneously. This paper provides an overview of the research progresses and trends on the emerging materials used to prepare MMMs for pollutant removal from water in the recent five years. The transition of the research trend was investigated, and the most preferred materials to prepare MMMs were weighed up based on the research trend. Various application examples where each emerging material was used have been introduced along with specific mechanisms underlying how the better performance was realized. Lastly, the perspective section addresses how to further improve the removal efficiency of pollutants in an aqueous phase, where we could find a niche to spot new materials to develop environmentally friendly MMMs, and where we could further apply MMMs.

Simultaneous Increase of Solvent Flux and Rejection of Thin-Film Composite Membranes by Incorporation of Dopamine-Modified Mesoporous Silica

Thin-film nanocomposite membranes have shown great promise in organic solvent nanofiltration. However, it is challenging to acquire high permeation flux without severe swelling, which might do harm to rejection and long-term stability. In this study, we introduced dopamine-modified mesoporous silica nanoparticles into the polyamide (PA) matrix via interfacial polymerization to fabricate a series of thin-film nanocomposite membranes. By using polyethyleneimine (PEI) as the aqueous monomer, the modified nanoparticles are designed to be cross-linked within the PA network, which allows the penetration of PEI into the mesopores, and therefore, the membranes show better resistance to solvent-induced swelling and pressure-induced densification. More importantly, the mesopores of nanoparticles provide additional fast channels for solvents, resulting in an unusual enhancement of solvent flux under reduced membrane swelling. Along with the permeation flux, the rejection performance of the nanocomposite membranes is simultaneously improved, thanks to the controlled swelling arising from the strong interfacial adhesion. Thin-film nanocomposite membranes with optimal filler concentration exhibit a high isopropanol permeance of 8.47 L m^-2 h^-1 bar^-1 as well as a quite low-molecular-weight cutoff of 281 Da.

Structure-designed synthesis of hollow/porous cobalt sulfide/phosphide based materials for optimizing supercapacitor storage properties and hydrogen evolution reaction

Cobalt-based transition metal phosphides/sulfides have been viewed as promising candidates for supercapacitor (SCs) and hydrogen evolution reaction (HER) featured with their intrinsic merits. Nevertheless, the sluggish reaction kinetics and drastic volume expansion upon electrochemical process hinder their commercial application. In this work, the hollow/porous cobalt sulfide/phosphide based nanocuboids (C-CoP₄ and CoS₂ HNs) with superior specific surface area are achieved by employing a novel chemical etching-phosphatization/sulfuration strategy. The hollow/porous structure could offer rich active sites and shorten electrons/ions diffusion length. In virtue of their structural advantage, the obtained C-CoP₄ and CoS₂ HNs perform superior specific capacitance, fast charge/discharge rate and beneficial cycling stability. The advanced asymmetrical supercapacitors assembled by C-CoP₄ and CoS₂ HNs deliver exceptional energy density, respectively. Furthermore, when employed as hydrogen evolution reaction electrocatalysts, C-CoP₄ and CoS₂ HNs yield favorable electrocatalytic activity. These findings shed fundamental insight on the design of dual-functional transition metal phosphide/sulfide based materials for optimizing hydrogen evolution reaction and supercapacitor storage properties.