Embedding Silver Nanowires into a Hydroxypropyl Methyl Cellulose Film for Flexible Electrochromic Devices with High Electromechanical Stability

Sustainable and biodegradable polymer packaging: Perspectives, challenges, and opportunities

The escalating environmental impact of non-biodegradable plastic waste has intensified global efforts to seek sustainable alternatives, with biodegradable polymers from renewable sources emerging as a promising solution. This manuscript provides the current perspectives, challenges, and opportunities within the field of sustainable and biodegradable packaging. Despite a significant market presence of conventional non-biodegradable petrochemical-based plastics, there is a growing trend towards the adoption of bio-based polymers from renewable resources driven by environmental sustainability and regulatory measures. However, the transition to biodegradable packaging is fraught with challenges, including scalability, cost-effectiveness, technological limitations, comprehensive waste management systems, and infrastructural needs. The manuscript highlights the intrinsic technological challenges and the need for advancements in material science to enhance the performance and adoption of biodegradable packaging. This paper also supply insights into the development and implementation of biodegradable packaging, offering a comprehensive overview of its role in achieving global sustainability goals.

Simplifying perovskite solar cell fabrication for materials testing: how to use unetched substrates with the aid of a three-dimensionally printed cell holder

This work demonstrates that unetched substrates can be reliably used in perovskite solar cell (PSC) fabrication. Chemical etching and laser patterning of the bottom electrodes are time- and resource-consuming processes. In particular, when testing novel conductive substrate materials, such as metallic or bio-based substrates, etching or patterning could be entirely unfeasible or could require significant process optimization. Avoiding these steps could accelerate research on PSCs, yet the literature shows no attempts to override these steps. Here, PSCs were fabricated and characterized using three-dimensionally printed holders with spring-loaded pins. We show that devices made on unetched substrates have, on average, a similar performance to those made on etched substrates (16 ± 1% and 16.0 ± 0.7%, respectively). Our study provides a new strategy for fabricating PSCs, particularly when etching and laser patterning are impractical.

Preparation and Properties of Polyaniline/Hydroxypropyl Methylcellulose Composite Conductive Thin Films

In this work, a chemical grafting polymerization method was employed to synthesize EHPMC-g-PANI self-supporting films. Polyaniline (PANI) was grafted onto hydroxypropyl methylcellulose (HPMC) modified with epichlorohydrin (EPHMC) to obtain an EHPMC-g-PANI aqueous dispersion, which was subsequently dried to form the self-supporting films. The introduction of HPMC, with its excellent film-forming ability and mechanical strength, successfully addressed the poor film-forming ability and mechanical properties intrinsic to PANI. Compared to in situ polymerized HPMC/PANI, the EHPMC-g-PANI exhibited significantly improved storage stability. Moreover, the fabricated EHPMC-g-PANI films displayed a more uniform and smoother morphology. The conductivity of all the films ranged from 10-2 to 10-1 S/cm, and their tensile strength reached up to 36.1 MPa. These results demonstrate that the prepared EHPMC-g-PANI holds promising potential for applications in various fields, including conductive paper, sensors, and conductive inks.

Fabrication and Analysis of Microcapsule Electrets with a Tunable Flexoelectric-like Response

The electret has drawn considerable attention as an emerging flexible energy collector. In this work, a charged microcapsule is designed which can provide a stable storage space for electric charge in the electret. The flexoelectric-like response is achieved by embedding a layer of charged microcapsules in the middle plane of the flexible polymer to form an electret. The results of Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy verified the successful preparation of microcapsules. Zeta potential analysis showed the negative electrical properties of the microcapsules. The prepared microcapsule electret has a significant flexoelectric effect under loading conditions. This work presents a preliminary theoretical study of the microcapsule electret to optimize the output characteristics of the electret by varying the parameters, including the number of microcapsules, the size of the electret, and the external load. Good agreement was achieved with the experimental results, which verified the validity of the theoretical study. This work provides a new method for preparing electret and further promotes its application in electromechanical transducers.

Metal-Free Transparent Three-Dimensional Flexible Electronics by Selective Molecular Bridges

Flexible and transparent electronics is a new generation of device enabling modern interactive designs, which facilitates the recent development of low-cost, lightweight, and flexible materials. Although conventional indium tin oxide material still dominates the major market, its brittleness and steadily increasing price drive scientists to search for other alternatives. To meet the high demand, numerous metallic or organic conductive materials have been developed, but their poor adhesion toward supporting substrates and the subsequent circuit patterning approach remains problematic. In this study, a robust metal-free flexible conductive film fabrication strategy is introduced. The flexible polyethylene terephthalate (PET) film is utilized as the base, where a poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) conductive layer is tightly linked onto this supporting substrate. An interface activation process, i.e., oxygen plasma treatment, generates PET surface active spots to react with the subsequently introduced poly(vinyl alcohol) (PVA) molecule functional groups. This spatially selective PVA molecular bridge therefore acts as a dual-function intermediate layer through covalent bonding toward PET and hydrogen bonding toward PEDOT:PSS to conjugate two distinct materials. This PEDOT:PSS/PVA/PET film delivers superior physical properties, such as a high conductivity of 38.2 Ω/sq and great optical transmittance of 84.1%, which are well tunable under conductive polymer thickness controls. The film is also durable and can maintain original electrical properties even under serious bending for hundreds of cycles. Relying on these outstanding performances, arbitrary conductive circuits are built on this flexible substrate and can function as normal electronics when integrated with multiple electronic parts, e.g., light-emitting diodes (LEDs). Superior electrical signal outputs are achieved when complicated stereo structures including folding, splicing, interlacing, and braiding are incorporated, enabling the use of these films for flexible three-dimensional electronics assembling. Space identifying smart key and lock pair, origami rabbit-carrot touch response, pressure-stimulated jumping frog, and moving dinosaur recognition designs realize these PEDOT:PSS/PVA/PET film-based human-machine interactive devices. This flexible, transparent, and conductive film generation approach by molecular bridge creation should facilitate future development of flexible or foldable devices with complex circuits.

High-Performance Flexible Transparent Electrodes Fabricated via Laser Nano-Welding of Silver Nanowires

Silver nanowires (Ag-NWs), which possess a high aspect ratio with superior electrical conductivity and transmittance, show great promise as flexible transparent electrodes (FTEs) for future electronics. Unfortunately, the fabrication of Ag-NW conductive networks with low conductivity and high transmittance is a major challenge due to the ohmic contact resistance between Ag-NWs. Here we report a facile method of fabricating high-performance Ag-NW electrodes on flexible substrates. A 532 nm nanosecond pulsed laser is employed to nano-weld the Ag-NW junctions through the energy confinement caused by localized surface plasmon resonance, reducing the sheet resistance and connecting the junctions with the substrate. Additionally, the thermal effect of the pulsed laser on organic substrates can be ignored due to the low energy input and high transparency of the substrate. The fabricated FTEs demonstrate a high transmittance (up to 85.9%) in the visible band, a low sheet resistance of 11.3 Ω/sq, high flexibility and strong durability. The applications of FTEs to 2D materials and LEDs are also explored. The present work points toward a promising new method for fabricating high-performance FTEs for future wearable electronic and optoelectronic devices.