Serum Protein Adsorption Modulates the Toxicity of Highly Positively Charged Hydrogel Surfaces

Stem cell-mediated bone regeneration of marine-derived fibrinolytic compound (FGFC-1) loaded carboxymethyl chitosan hydrogels

Carboxymethyl chitosan (CMC)-based hydrogels (HG) have gained significant attention for therapeutic applications due to their biomimetic properties and biocompatibility. This study explores, for the first time, the regenerative and osteogenic potential of CMC-HG incorporated with a marine fungi-derived fibrinolytic compound, FGFC-1. The inclusion of FGFC-1 did not significantly alter the crucial characteristics of the HGs, including secondary structure, thermal stability, protein adhesion, and in vitro degradation. However, incorporation of FGFC1 increased the swelling capacity (from 132.88 % to 157.11 %) and decreased the mineral adhesion (0.416 at 0.1 mg/ml) and porosity (from 72.95 % to 54.29 %). In general, the bacterial adhesion was decreased by 44.3 % in HG than control., Optimal culture conditions for mesenchymal stem cells (MSCs) were achieved with 2 % CMC and FGFC-1 concentrations of 0.01-1 mg/ml (Supplementary Fig. S2), supporting significant MSC growth. SEM image proved more interconnected dense fibrillar clustered morphology of MSCs on HGs than 2D. FGFC-1 accelerated osteogenic differentiation of MSCs by increasing mRNA expression levels of Runx2 (4.98), collagen-1 alpha-1 (3.4), osteocalcin (3.62), and ALP (4.20), which was further validated through enhanced staining for alizarin red, von Kossa, and alkaline phosphatase, as well as immunostaining for osteocollagen and osteocalcin in differentiated MSCs within the hydrogels. Notably, FGFC-1 significantly induced osteogenic differentiation along with supplements. These findings highlight FGFC-1-loaded CMC hydrogels as a promising strategy for stem cell-mediated bone regeneration in biomedical applications.

A hyaluronic acid-modified cyclodextrin self-assembly system for the delivery of β-carotene in the treatment of dry eye disease

Dry eye disease (DED) is a multifactorial ocular disease, the core mechanism of which is the tear film instability caused by ocular oxidative stress damage and inflammation. Although various pharmaceutical agents are available for DED treatment, their effectiveness is often limited by the eyes' unique biological barriers, and the long-term use of steroid hormones can lead to several adverse effects. This study reported a nano-supramolecular delivery system consisting of a polycyclodextrin (PCD), hyaluronic acid (HA) and the natural compound β-carotene (BC) for the DED treatment. Our findings indicate that the HA/PCD@BC eye drops effectively distribute on the ocular surface, retain BC, and significantly enhance the corneal penetration of BC. The excellent biocompatibility of HA/PCD@BC was demonstrated through viability testing on different cell lines, the Draize eye test, as well as the hematoxylin-eosin staining (H&E) sections of cornea and conjunctiva. Both in vitro oxidative stress assays and in vivo DED model evaluations demonstrated that the HA/PCD@BC delivery system significantly reduced abnormal oxidative stress levels on the ocular surface, inhibited the secretion of inflammatory factors, and increased the secretion of tear film stabilizing mucin. These effects collectively improved pathological changes in eye tissues and minimized damage to the ocular surface. It is of particular importance to note that HA/PCD@BC eye drops showed superior efficacy in comparison to cyclosporine A (CsA), an FDA-approved first-line drug. To sum up, the HA/PCD@BC nanodelivery system provides a natural, safe and effective therapeutic strategy for the treatment of DED and various ocular diseases.

Sono-Triggered Biomimetically Nanoantibiotics Mediate Precise Sequential Therapy of MRSA-Induced Lung Infection

Bacterial-induced lower respiratory tract infections are a growing global health concern, exacerbated by the inefficacy of conventional antibiotics and delivery methods to effectively target the lower respiratory tract, leading to suboptimal therapeutic outcomes. To address this challenge, this work engineers PBP2a antibody-presenting membrane nanovesicles (AMVs) specifically designed to target the penicillin-binding protein variant on the surface of methicillin-resistant Staphylococcus aureus (MRSA). Concurrently, this work develops pure ciprofloxacin nanoparticles (NanoCip) that, for the first time, exhibits exceptional self-generated sonodynamic properties, attributed to hydrogen-bond-driven self-assembly, while maintaining their inherent pharmacological efficacy. These NanoCip particles are integrated with AMVs to create a novel biomimetic nanomedicine, AMV@NanoCip. This formulation demonstrated remarkable MRSA-targeting affinity in both in vitro and in vivo models, significantly enhancing antibacterial activity. Upon ultrasound stimulation, AMV@NanoCip achieves over 99.99% sterilization of MRSA in vitro, with a reduction exceeding 5.14 Log CFU. Prokaryotic transcriptomic analysis further elucidates the synergistic mechanisms by which AMV@NanoCip, coupled with ultrasound, disrupts the MRSA exoskeleton. In a MRSA-induced pneumonia animal model, AMV@NanoCip+US results in a substantial bacterial load reduction in the lungs (99.99%, 4.02 Log CFU). This sequential treatment strategy (adhesion-membrane disruption-synergistic therapy) offers significant promise as an innovative therapeutic approach for combating bacterial infections.

Plasma membrane damage limits cytoplasmic delivery by conventional cell penetrating peptides

Intracellular delivery of large molecule cargo via cell penetrating peptides (CPPs) is an inefficient process and despite intense efforts in past decades, improvements in efficiency have been marginal. Utilizing a standardized and comparative analysis of the delivery efficiency of previously described cationic, anionic, and amphiphilic CPPs, we demonstrate that the delivery ceiling is accompanied by irreparable plasma membrane damage that is part of the uptake mechanism. As a consequence, intracellular delivery correlates with cell toxicity and is more efficient for smaller peptides than for large molecule cargo. The delivery of pharmaceutically relevant cargo quantities with acceptable toxicity thus seems hard to achieve with the CPPs tested in our study. Our results suggest that any engineered intracellular delivery system based on conventional cationic or amphiphilic CPPs, or the design principles underlying them, needs to accept low delivery yields due to toxicity limiting efficient cytoplasmic uptake. Novel peptide designs based on detailed study of uptake mechanisms are required to overcome these limitations.

Manipulation of cross-linking in PEDOT:PSS hydrogels for biointerfacing

Conducting hydrogels can be used to fabricate bioelectronic devices that are soft for improved cell- and tissue-interfacing. Those based on conjugated polymers, such as poly(3,4-ethylene-dioxythiophene):polystyrene sulfonate (PEDOT:PSS), can be made simply with solution-based processing techniques, yet the influence of fabrication variables on final gel properties is not fully understood. In this study, we investigated if PEDOT:PSS cross-linking could be manipulated by changing the concentration of a gelling agent, ionic liquid, in the hydrogel precursor mixture. Rheology and gelation kinetics of precursor mixtures were investigated, and aqueous stability, swelling, conductivity, stiffness, and cytocompatibility of formed hydrogels were characterized. Increasing ionic liquid concentration was found to increase cross-linking as measured by decreased swelling, decreased non-network fraction, increased stiffness, and increased conductivity. Such manipulation of IL concentration thus afforded control of final gel properties and was utilized in further investigations of biointerfacing. When cross-linked sufficiently, PEDOT:PSS hydrogels were stable in sterile cell culture conditions for at least 28 days. Additionally, hydrogels supported a viable and proliferating population of human dermal fibroblasts for at least two weeks. Collectively, these characterizations of stability and cytocompatibility illustrate that these PEDOT:PSS hydrogels have significant promise for biointerfacing applications that require soft materials for direct interaction with cells.

Immunoglobulin adsorption and film formation on mechanically wrinkled and crumpled surfaces at submonolayer coverage

Understanding protein adsorption behavior on rough and wrinkled surfaces is vital to applications including biosensors and flexible biomedical devices. Despite this, there is a dearth of study on protein interaction with regularly undulating surface topographies, particularly in regions of negative curvature. Here we report nanoscale adsorption behavior of immunoglobulin M (IgM) and immunoglobulin G (IgG) on wrinkled and crumpled surfaces via atomic force microscopy (AFM). Hydrophilic plasma treated poly(dimethylsiloxane) (PDMS) wrinkles with varying dimensions exhibit higher surface coverage of IgM on wrinkle peaks over valleys. Negative curvature in the valleys is determined to reduce protein surface coverage based both on an increase in geometric hindrance on concave surfaces, and reduced binding energy as calculated in coarse-grained molecular dynamics simulations. The smaller IgG molecule in contrast shows no observable effects on coverage from this degree of curvature. The same wrinkles with an overlayer of monolayer graphene show hydrophobic spreading and network formation, and inhomogeneous coverage across wrinkle peaks and valleys attributed to filament wetting and drying effects in the valleys. Additionally, adsorption onto uniaxial buckle delaminated graphene shows that when wrinkle features are on the length scale of the protein diameter, hydrophobic deformation and spreading do not occur and both IgM and IgG molecules retain their dimensions. These results demonstrate that undulating wrinkled surfaces characteristic of flexible substrates can have significant effects on protein surface distribution with potential implications for design of materials for biological applications.

Current and future outlook of loaded components in hydrogel composites for the treatment of chronic diabetic ulcers

Due to recalcitrant microangiopathy and chronic infection, traditional treatments do not easily produce satisfactory results for chronic diabetic ulcers. In recent years, due to the advantages of high biocompatibility and modifiability, an increasing number of hydrogel materials have been applied to the treatment of chronic wounds in diabetic patients. Research on composite hydrogels has received increasing attention since loading different components can greatly increase the ability of composite hydrogels to treat chronic diabetic wounds. This review summarizes and details a variety of newly loaded components currently used in hydrogel composites for the treatment of chronic diabetic ulcers, such as polymer/polysaccharides/organic chemicals, stem cells/exosomes/progenitor cells, chelating agents/metal ions, plant extracts, proteins (cytokines/peptides/enzymes) and nucleoside products, and medicines/drugs, to help researchers understand the characteristics of these components in the treatment of diabetic chronic wounds. This review also discusses a number of components that have not yet been applied but have the potential to be loaded into hydrogels, all of which play roles in the biomedical field and may become important loading components in the future. This review provides a "loading component shelf" for researchers of composite hydrogels and a theoretical basis for the future construction of "all-in-one" hydrogels.

Effect of Amino Acid Substitution on Cell Adhesion Properties of Octa-arginine

Octa-arginine (R8) is a cell-permeable peptide with excellent cell adhesion properties. Surface-immobilized R8 mediates cell attachment via cell surface receptors, such as heparan sulfate proteoglycans and integrin β1, and promotes cell spreading and proliferation. However, it is not clear how these properties are affected by specific peptide composition and if they could be improved. Here, we synthesized XR8 peptides, in which half of the original R8 arginine residues were replaced with another amino acid (X). We then aimed to investigate the effect of the substitution on cell adhesion and proliferation on XR8-conjugated agarose matrices. The XR8-matrix showed slightly better cell attachment when X was a hydrophobic or aromatic amino acid. However, hydrophobic XR8-matrices tended to promote cell proliferation to a less extent. Eventually, YR8-matrix most efficiently promoted cell adhesion, spreading, and proliferation among the XR8-matrices tested. Collectively, these observations indicate that the properties of residue X play a major role in the biological activity of XR8-matrices and shed light on the interaction between small peptides and the cell membrane. Further, YR8 is a promising cell-adhesive peptide for the development of cell culture substrates and biomaterials.

Macromolecular Solute Transport in Supramolecular Hydrogels Spanning Dynamic to Quasi-Static States

Hydrogels prepared from supramolecular cross-linking motifs are appealing for use as biomaterials and drug delivery technologies. The inclusion of macromolecules (e.g., protein therapeutics) in these materials is relevant to many of their intended uses. However, the impact of dynamic network cross-linking on macromolecule diffusion must be better understood. Here, hydrogel networks with identical topology but disparate cross-link dynamics are explored. These materials are prepared from cross-linking with host-guest complexes of the cucurbit[7]uril (CB[7]) macrocycle and two guests of different affinity. Rheology confirms differences in bulk material dynamics arising from differences in cross-link thermodynamics. Fluorescence recovery after photobleaching (FRAP) provides insight into macromolecule diffusion as a function of probe molecular weight and hydrogel network dynamics. Together, both rheology and FRAP enable the estimation of the mean network mesh size, which is then related to the solute hydrodynamic diameters to further understand macromolecule diffusion. Interestingly, the thermodynamics of host-guest cross-linking are correlated with a marked deviation from classical diffusion behavior for higher molecular weight probes, yielding solute aggregation in high-affinity networks. These studies offer insights into fundamental macromolecular transport phenomena as they relate to the association dynamics of supramolecular networks. Translation of these materials from in vitro to in vivo is also assessed by bulk release of an encapsulated macromolecule. Contradictory in vitro to in vivo results with inverse relationships in release between the two hydrogels underscores the caution demanded when translating supramolecular biomaterials into application.

Octa-arginine and Octa-lysine Promote Cell Adhesion through Heparan Sulfate Proteoglycans and Integrins

Octa-arginine (R8) has been extensively studied as a cell-penetrating peptide. R8 binds to diverse transmembrane heparan sulfate proteoglycans (HSPGs), including syndecans, and is internalized by cells. R8 is also reported to bind to integrin β1. In this study, we evaluated the biological activities of R8 and octa-lysine (K8), a peptide similar to R8, with a focus on cell adhesion. R8 and K8 were immobilized on aldehyde-agarose matrices via covalent conjugation, and the effect of these peptides on cell attachment, spreading, and proliferation was examined using human dermal fibroblasts. The results indicated that R8- and K8-matrices mediate cell adhesion mainly via HSPGs. Moreover, R8- and K8-matrices interacted with integrin β1 and promote cell spreading and proliferation. These results are useful for further understanding of the R8-membrane interactions and the cellular uptake mechanisms. In addition, the R8- and K8-matrices may potentially be used as a multi-functional biomaterial to promote cell adhesion, spreading, and proliferation.

Peptide hydrogels for affinity-controlled release of therapeutic cargo: Current and potential strategies

The development of devices for the precise and controlled delivery of therapeutics has grown rapidly over the last few decades. Drug delivery materials must provide a depot with delivery profiles that satisfy pharmacodynamic and pharmacokinetic requirements resulting in clinical benefit. Therapeutic efficacy can be limited due to short half-life and poor stability. Thus, to compensate for this, frequent administration and high doses are often required to achieve therapeutic effect, which in turn increases potential side effects and systemic toxicity. This can potentially be mitigated by using materials that can deliver drugs at controlled rates, and material design principles that allow this are continuously evolving. Affinity-based release strategies incorporate a myriad of reversible interactions into a gel network, which have affinities for the therapeutic of interest. Reversible binding to the gel network impacts the release profile of the drug. Such affinity-based interactions can be modulated to control the release profile to meet pharmacokinetic benchmarks. Much work has been done developing affinity-based control in the context of polymer-based materials. However, this strategy has not been widely implemented in peptide-based hydrogels. Herein, we present recent advances in the use of affinity-controlled peptide gel release systems and their associated mechanisms for applications in drug delivery.

From structure to application: Progress and opportunities in peptide materials development

For over 20 years, peptide materials in their hydrogel or soluble fibril form have been used for biomedical applications such as drug delivery, cell culture, vaccines, and tissue regeneration. To facilitate the translation of these materials, key areas of research still need to be addressed. Their structural characterization lags compared to amyloid proteins. Many of the structural features designed to guide materials formation are primarily being characterized by their observation in atomic resolution structures of amyloid assemblies. Herein, these motifs are examined in relation to peptide designs identifying common interactions that drive assembly and provide structural specificity. Current efforts to design complex structures, as reviewed here, highlight the need to extend the structural revolution of amyloid proteins to peptide assemblies to validate design principles. With respect to clinical applications, the fundamental interactions and responses of proteins, cells, and the immune system to peptide materials are still not well understood. Only a few trends are just now emerging for peptide materials interactions with biological systems. Understanding how peptide material properties influence these interactions will enable the translation of materials towards current and emerging applications.

Capacity for increased surface area in the hydrophobic core of β-sheet peptide bilayer nanoribbons

Amphipathic peptides with amino acids arranged in alternating patterns of hydrophobic and hydrophilic residues efficiently self-assemble into β-sheet bilayer nanoribbons. Hydrophobic side chain functionality is effectively buried in the interior of the putative bilayer of these nanoribbons. This study investigates consequences on self-assembly of increasing the surface area of aromatic side chain groups that reside in the hydrophobic core of nanoribbons derived from Ac-(XKXE)2 -NH2 peptides (X = hydrophobic residue). A series of Ac-(XKXE)2 -NH2 peptides incorporating aromatic amino acids of increasing molecular volume and steric profile (X = phenylalanine [Phe], homophenylalanine [Hph], tryptophan [Trp], 1-naphthylalanine [1-Nal], 2-naphthylalanine [2-Nal], or biphenylalanine [Bip]) were assessed to determine substitution effects on self-assembly propensity and on morphology of the resulting nanoribbon structures. Additional studies were conducted to determine the effects of incorporating amino acids of differing steric profile in the hydrophobic core (Ac-X1 KFEFKFE-NH2 and Ac-(X1,5 KFE)-NH2 peptides, X = Trp or Bip). Spectroscopic analysis by circular dichroism (CD) and Fourier transform infrared (FT-IR) spectroscopy indicated β-sheet formation for all variants. Self-assembly rate increased with peptide hydrophobicity; increased molecular volume of the hydrophobic side chain groups did not appear to induce kinetic penalties on self-assembly rates. Transmission electron microscopy (TEM) imaging indicated variation in fibril morphology as a function of amino acid in the X positions. This study confirms that hydrophobicity of amphipathic Ac-(XKXE)2 -NH2 peptides correlates to self-assembly propensity and that the hydrophobic core of the resulting nanoribbon bilayers has a significant capacity to accommodate sterically demanding functional groups. These findings provide insight that may be used to guide the exploitation of self-assembled amphipathic peptides as functional biomaterials.

Smart Hydrogels: Preparation, Characterization, and Determination of Transition Points of Crosslinked N-Isopropyl Acrylamide/Acrylamide/Carboxylic Acids Polymers

Smart hydrogels (SH) were prepared by thermal free radical polymerization of N-isopropyl acrylamide (NIPAAm), acrylamide (AAm) with acrylic acid (A) or maleic acid (M), and N,N'-methylene bisacrylamide. Spectroscopic and thermal characterizations of SHs were performed using FTIR, TGA, and DSC. To determine the effects of SHs on swelling characteristics, swelling studies were performed in different solvents, solutions, temperatures, pHs, and ionic strengths. In addition, cycle equilibrium swelling studies were carried out at different temperatures and pHs. The temperature and pH transition points of SHs are calculated using a sigmoidal equation. The pH transition points were calculated as 5.2 and 4.2 for SH-M and SH-A, respectively. The NIPAAm/AAm hydrogel exhibits a critical solution temperature (LCST) of 28.35 °C, while the SH-A and SH-M hydrogels exhibit the LCST of 34.215 °C and 28.798 °C, respectively, and the LCST of SH-A is close to the body. temperature. Commercial (CHSA) and blood human serum albumin (BHSA) were used to find the adsorption properties of biopolymers on SHs. SH-M was the most efficient SH, adsorbing 49% of CHSA while absorbing 16% of BHSA. In conclusion, the sigmoidal equation or Gaussian approach can be a useful tool for chemists, chemical engineers, polymer and plastics scientists to find the transition points of smart hydrogels.