Recent Advances in Multimetal and Doped Transition-Metal Phosphides for the Hydrogen Evolution Reaction at Different pH values

H3O+ assisted hydrogen spillover over Ru-Mo2Ti2C3 for efficient alkaline hydrogen evolution

The limited supply capacity and high transport kinetic energy barrier of H* hinder the implementation of the alkaline hydrogen evolution reaction (HER). Constructing an H3O+ environment can effectively enhance the concentration and diffusion kinetics of H*, thereby alleviating the associated limiting factors. Here we report a novel Ru nanoclusters supported by 2D Mo2Ti2C3 nanosheets (Ru-Mo2Ti2C3) as an effective HER electrocatalyst in alkaline environments. Results indicate that H* is rapidly generated at the Ru site due to the efficient water dissociation capability of Ru-Mo2Ti2C3, subsequently combining with water molecules to form H3O+. H3O+ then rapidly diffuses to the -O group on MXene, which can release H* and act as active sites for H2 evolution, facilitated by the lower migration energy barrier of H3O+. This strategy simultaneously enhances both the supply and transfer of H*, facilitating synergistic catalysis between Ru and MXene. Consequently, Ru-Mo2Ti2C3 exhibits an overpotential of 47 mV at 10 mA cm-2, lower than that observed in acidic media (108 mV). This paper introduces a new approach for the development of catalytic materials aimed at achieving efficient and pH-universal electrochemical H2 evolution.

Tunable B-Doped Cobalt Phosphide Nanosheets Engineered via Phosphorus Activation of Co-MOFs for High Efficiency Alkaline Water-Splitting

Introducing secondary heteroatoms and simultaneous in situ surface modification can enhance electrocatalysts by affecting their porosity for adjusting electrochemically active surface area (ECSA), number of active sites, and electronic properties, thus mitigating the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Here, mesoporous 3D heterostructures of boron-doped cobalt phosphide@nitrogen-doped carbon nanosheet network arrays are successfully grown on Ni foam as free-standing bifunctional electrocatalysts with controlled phosphorous levels (B-CoPx@NC/NF, x = 0.25, 0.5, and 1). Boron doping induces the Co active sites to bind O* and OOH* intermediates. Meanwhile, an optimal phosphorous content also leads to ideal adsorption strength at each reaction step, satisfying the Sabatier principle well. The optimal B-CoP0.5@NC/NF requires low overpotentials of 248 mV for OER and 95 mV for HER with long-term stability. The B-CoP0.5@NC/NF (+/-) electrolyzer exhibits a low cell potential of 1.59 V at 10 mA cm-2 for overall water-splitting, with superior activity compared to the RuO2/NF(+)//20%Pt/NF(-) electrolyzer at high current densities above 50 mA cm-2. Such exceptional bifunctional activities are attributed to the modulated electronic structure, lower charge-transfer resistance, higher ECSA, and inductive effect of B-doping, thus boosting both OER and HER activities in alkaline media.

Achieving advanced hydrogen evolution under large current density using an amorphous/crystalline core-shell electrocatalyst of a-NiCoP/Co2P

Non-precious transition metal-based electrocatalysts with high activities are promising candidates for substituting Pt- or Ru-based electrocatalysts in hydrogen evolution. In this study, we propose core-shell engineering to combine the amorphous NiCoP and crystalline Co2P (a-NiCoP/Co2P@NF), which requires an ultra-low overpotential of only 26 mV to achieve the benchmark current density of 10 mA cm-2. Furthermore, it achieves an industrial-level hydrogen evolution current density of 500 mA cm-2 with excellent stability. The superior catalytic performance and stability can be attributed to the hierarchical amorphous/crystalline interface and the electron-rich interfacial Co sites. The amorphous NiCoP shell can not only protect the internal Co2P from corrosion, but also provide a larger electrochemically active area. Together, the Co2P core provides fast electron transport and promotes H2 emission from the interfacial electron-rich Co sites. This work provides inspiration to the rational design of an advanced core-shell structure between amorphous and crystalline states.

Metal-Free Electrocatalytic Alkaline Water Splitting by Porous Macrocyclic Proton Sponges

Macrocycles are unique as they encapsulate and transfer guest molecules or ions and facilitate catalytic processes. Although metalated macrocycles are pivotal in electrocatalytic processes, using metal-free analogs has been rare. Following the strategy of Kanbara et al., we synthesized an azacalixarene macrocycle-N, N', N''-tris(p-aminophenyl)azacalix[3](2,6)pyridine (CalixNH2). The macrocycle encapsulates a proton in its cavity, maintaining the protonation even in highly alkaline media. Notably, it retains almost 50 % protonated form in 1 M KOH (~pH 14)-acting as a proton sponge. As hydrogen evolution is complex in alkaline media owing to sluggish water dissociation, we implemented the proton sponge (CalixNH2) in an alkaline hydrogen evolution reaction. Conjugated Porous polymers, TpCalix and DhaCalix, have been synthesized from the triamine-CalixNH2. The most efficient catalyst, TpCalix, has shown excellent performance in alkaline HER and OER in 1 M KOH (~pH 14), with low overpotentials of only 112(±2) and 290(±2) mV at 10 mA cm-2, respectively, and durable up to 24 hours. A full-cell reaction using TpCalix in both the cathode and anode exhibited a low full-cell voltage of 1.73 V and was stable for 12 hours. DFT calculations verified the tripyridinic core, which acts as the principal site for proton abstraction and binding.

Substitutional Platinum-Phosphorus Solid Solution by Phosphidation of Worm-Like Pt Nanoparticles Using Tri-n-octylphosphine

Herein, the investigations into the phosphidation of platinum (Pt) nanoparticles are reported using tri-n-octylphosphine (TOP) at elevated temperature in an organic solvent, and identify a unique phenomenon not addressed before: The phosphorus (P) atoms can replace partial Pt atoms from their lattice points to form a substitutional Pt-P solid solution. The rationality is authenticated for forming substitutional Pt-P solid solution via P doping by various characterizations and density functional theory (DFT) calculations, both of which suggests that the maximum P content in the Pt-P solid solution is approximately ≈10% for maintaining the stability of the face-centered cubic crystal structure.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Oxygen-doped FeP on Ti Foil with Ti3O Interlayer for Efficient and Durable Electrolysis

The development of electrocatalysts with low cost, high efficiency, and long-term durability is crucial for advancing green hydrogen production. Transition metal phosphides (TMPs) have been proved to be efficient electrocatalyst, while the improvement in the performance and durability of the TMPs remains a big challenge. Employing atmospheric pressure chemical vapor deposition (APCVD) and phosphorization, FeP/Ti electrodes are fabricated featuring controllable oxygen ingredients (O-FeP/Ti). This manipulation of oxygen content fine-tunes the electronic structure of the catalyst, resulting in improved surface reaction kinetics and catalytic activity. The optimized O-FeP-400/Ti exhibits outstanding HER activity with overpotentials of 142 and 159 mV at -10 mA cm-2 in 0.5 M H2SO4 and 1 M KOH, respectively. Notably, the obtained O-FeP/Ti cathode also displays remarkable durability of up to 200 h in acidic electrolyte with surface topography remaining intact. For the first time, the low-valence titanium oxide (Ti3O) interlayer is identified in the composite electrode and ascribed for the superior connection between Ti substrate and the surface O-FeP catalyst, as supported by experimental results and density functional theory (DFT) analysis. This work has expanded the potential applications of transition metal phosphides (TMPs) as a cost-effective, highly efficient and durable catalyst for water splitting.

Expanding the frontiers of electrocatalysis: advanced theoretical methods for water splitting

Electrochemical water splitting, which encompasses the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), offers a promising route for sustainable hydrogen production. The development of efficient and cost-effective electrocatalysts is crucial for advancing this technology, especially given the reliance on expensive transition metals, such as Pt and Ir, in traditional catalysts. This review highlights recent advances in the design and optimization of electrocatalysts, focusing on density functional theory (DFT) as a key tool for understanding and improving catalytic performance in the HER and OER. We begin by exploring DFT-based approaches for evaluating catalytic activity under both acidic and alkaline conditions. The review then shifts to a material-oriented perspective, showcasing key catalyst materials and the theoretical strategies employed to enhance their performance. In addition, we discuss scaling relationships that exist between binding energies and electronic structures through the use of charge-density analysis and d-band theory. Advanced concepts, such as the effects of adsorbate coverage, solvation, and applied potential on catalytic behavior, are also discussed. We finally focus on integrating machine learning (ML) with DFT to enable high-throughput screening and accelerate the discovery of novel water-splitting catalysts. This comprehensive review underscores the pivotal role that DFT plays in advancing electrocatalyst design and highlights its potential for shaping the future of sustainable hydrogen production.

Effect of design parameters in nanocatalyst synthesis on pyrolysis for producing diesel-like fuel from waste lubricating oil

Converting waste lubricating oil into diesel-like liquid fuels using pyrolysis presents a dual solution, addressing environmental pollution while offering a viable response to the fossil energy crisis. However, achieving high-quality fuel with a substantial yield necessitates the utilization of highly active and cost-effective catalysts. We report the development of Fe-Ni nanocatalysts, synthesized using a green approach and supported on TiO2, as a promising strategy for converting waste lubricating oil into premium-grade diesel-like fuel. To ensure efficient and effective pyrolysis processes, tailoring the synthesis parameters of these nanocatalysts is indispensable. In this study, we investigate the effect of design parameters on nanocatalyst synthesis, such as the concentrations of pre-catalysts and reducing agents, reducing time, and the amount of support material, and evaluate their impact on the quality and quantity of pyrolysis products. Through optimization of the synthesis process, a high quality diesel-like fuel with a product yield of about 54% at a mild reaction temperature of 400 °C was obtained. This study highlights the critical role of nanocatalysis in addressing persistent environmental and energy challenges while showcasing the potential of green nanocatalysts in sustainable waste-to-energy conversion processes.

Highly-dispersed 2D NiFeP/CoP heterojunction trifunctional catalyst for efficient electrolysis of water and urea

The electrocatalytic production of "green hydrogen", such as through the electrolysis of water or urea has been vigorously advocated to alleviate the energy crisis. However, their electrode reactions including oxygen evolution reaction (OER), urea oxidation reaction (UOR), and hydrogen evolution reaction (HER) all suffer from sluggish kinetics, which urgently need catalysts to accelerate the processes. Herein, we design and prepare an OER/UOR/HER trifunctional catalyst by transforming the homemade CoO nanorod into a two-dimensional (2D) ultrathin heterojunction nickel-iron-cobalt hybrid phosphides nanosheet (NiFeP/CoP) via a hydrothermal-phosphorization method. Consequently, a strong electronic interaction was found among the Ni2P/FeP4/CoP heterogeneous interfaces, which regulates the electronic structure. Besides the high mass transfer property of 2D nanosheet, Ni2P/FeP4/CoP displays improved OER/UOR/HER performance. At 10 mA cm-2, the OER overpotential reaches 274 mV in 1.0 M KOH, and the potential of UOR is only 1.389 V in 1.0 M KOH and 0.33 M urea. More strikingly, the two-electrode systems for electrolysis water and urea-assisted electrolysis water assembled by NiFeP/CoP could maintain long-term stability for 35 h and 12 h, respectively. This work may help to pave the way for upcoming research horizons of multifunctional electrocatalysts.

Recent Advances in and Challenges with Fe-Based Metallic Glasses for Catalytic Efficiency: Environment and Energy Fields

Metallic glass is being gradually recognized for its unique disordered atomic configuration and excellent catalytic activity, so is of great significance in the field of catalysis. Recent reports have demonstrated that Fe-based metallic glass, as a competitive new catalyst, has good catalytic activity for the fields of environment and energy, including high catalytic efficiency and stability. This review introduces the latest developments in metallic glasses with various atomic components and their excellent catalytic properties as catalysts. In this article, the influence of Fe-based metallic glass catalysts on the catalytic activity of dye wastewater treatment and water-splitting is discussed. The catalytic performance in different atomic composition systems and different water environment systems, and the preparation parameters to improve the surface activity of catalysts, are reviewed. This review also describes several prospects in the future development and practical application of Fe-based metallic glass catalysts and provides a new reference for the synthesis of novel catalysts.

Interfacial charge transfer in sheet Ni2P-FePx heterojunction to promote the study of electrocatalytic oxygen evolution

The substantial expense associated with catalysts significantly hampers the progress of electrolytic water-based hydrogen production technology. There is an urgent need to find non-precious metal catalysts that are both cost-effective and highly efficient. Here, the porous Ni2P-FePx nanomaterials were successfully prepared by hydrothermal method, nickel foam as the base, iron nitrate solution as the caustic agent and iron source, and finally phosphating at low temperature. The obtained porous Ni2P-FePx nanosheets showed excellent catalytic activity under alkaline PH = 14, and an overpotential of merely 241 mV was required to achieve a current density of 50 mA cm-2. The morphology of the nanosheet can still be flawlessly presented on the screen after 50 h of working at high current density.

Interfacial Electron Potential Well Facilitates the Design of Cobalt Phosphide Heterojunctions for Hydrogen Evolution

The interfacial electron modulation of electrocatalysts is an effective way to realize efficient hydrogen production, which is of great importance for future renewable energy systems. However, systematic theory-guided design of catalysts in heterojunction coupling is lacking. In this work, a multi-level theoretical calculation is performed to screen optimal candidates to form a heterojunction with CoP (101) surface for electrocatalytic hydrogen production. To overcome the weak adsorption of H+ on CoP (101), rational design of electrons potential well at the heterojunction interface can effectively enhance the hydrogen adsorption. All p-type cobalt-based phosphides are considered potential candidates at the beginning. After screening for conductivity, stability, interface matching screening, and ΔGH* evaluation, the CoP/Co2P-H system is identified to be able to display optimal hydrogen production performance. To verify the theoretical design, CoP, CoP/Co2P-H, and CoP/Co2P-O are synthesized and the electrochemical analysis is carried out. The hydrogen evolution reaction (HER) performance is consistent with the prediction. This work utilizes the electron potential well effect and multi-level screening calculations to design highly efficient heterojunction catalysts, which can provide useful theoretical guidance for the rational design of heterojunction-type catalysts.

Scalable One-Pot Fabrication of Carbon-Nanofiber-Supported Noble-Metal-Free Nanocrystals for Synergetic-Dependent Green Hydrogen Production: Unraveling Electrolyte and Support Effects

Electrocatalytic hydrogen evolution reactions (HER) are envisaged as the most promising sustainable approach for green hydrogen production. However, the considerably high cost often associated with such reactions, particularly upon scale-up, poses a daunting challenge. Herein, a facile, effective, and environmentally benign one-pot scalable approach is developed to fabricate MnM (M═Co, Cu, Ni, and Fe) nanocrystals supported over in situ formed carbon nanofibers (MnM/C) as efficient noble-metal-free electrocatalysts for HER. The formation of carbon nanofibers entails impregnating cellulose in an aqueous solution of metal precursors, followed by annealing the mixture at 550 °C. During the impregnation process, cellulose acts as a reactor for inducing the in situ reductions of MnM salts with the assistance of ether and hydroxyl groups to drive the mass production (several grams) of ultralong (5 ± 1 μM) carbon nanofibers ornamented with MnM nanoparticles (10-14 nm in size) at an average loading of 2.87 wt %. For better electrocatalytic HER benchmarking, the fabricated catalysts were tested over different working electrodes, i.e., carbon paper, carbon foam, and glassy carbon, in the presence of different electrolytes. All the fabricated MnM/C catalysts have demonstrated an appealing synergetic-effect-dependent HER activity, with MnCo/C exhibiting the best performance over carbon foam, close to that of the state-of-the-art commercial Pt/C (10 wt % Pt), with an overpotential of 11 mV at 10 mA cm-2, a hydrogen production rate of 2448 mol g-1 h-1, and a prolonged stability of 2 weeks. The HER performance attained by MnCo/C nanofibers is among the highest reported for Pt-free electrocatalysts, thanks to the mutual alloying effect, higher synergism, large surface area, and active interfacial interactions over the nanofibers. The presented findings underline the potential of our approach for the large-scale production of cost-effective electrocatalysts for practical HER.

Rationally Construction of Mn-Doped RuO2 Nanofibers for High-Activity and Stable Alkaline Ampere-Level Current Density Overall Water Splitting

Nowadays, highly active and stable alkaline bifunctional electrocatalysts toward water electrolysis that can work at high current density (≥1000 mA cm-2) are urgently needed. Herein, Mn-doped RuO2 (MnxRu1-xO2) nanofibers (NFs) are constructed to achieve this object, presenting wonderful hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performances with the overpotentials of only 269 and 461 mV at 1 A cm-2 in 1 m KOH solution, and remarkably stability under industrial demand with 1 A cm-2, significantly better than the benchmark Pt/C and commercial RuO2 electrocatalysts, respectively. More importantly, the assembled Mn0.05Ru0.95O2 NFs||Mn0.05Ru0.95O2 NFs electrolyzer toward overall water splitting reaches the current density of 10 mA cm-2 with a cell voltage of 1.52 V and also delivers an outstanding stability over 150 h of continuous operation, far surpassing commercial Pt/C||commercial RuO2, RuO2 NFs||RuO2 NFs and most previously reported exceptional electrolyzers. Theoretical calculations indicate that Mn-doping into RuO2 can significantly optimize the electronic structure and weaken the strength of O─H bond to achieve the near-zero hydrogen adsorption free energy (ΔGH*) value for HER, and can also effectively weaken the adsorption strength of intermediate O* at the relevant sites, achieving the higher OER catalytic activity, since the overlapping center of p-d orbitals is closer to the Fermi level.

Surface Tailoring-Modulated Bifunctional Oxygen Electrocatalysis with CoP for Rechargeable Zn-Air Battery and Water Splitting

The transition metal phosphide (TMP)-based functional electrocatalysts are very promising for the development of electrochemical energy conversion and storage devices including rechargeable metal-air batteries and water electrolyzer. Tuning the electrocatalytic activity of TMPs is one of the vital steps to achieve the desired performance of these energy devices. Herein, we demonstrate the modulation of the bifunctional oxygen electrocatalytic activity of nitrogen-doped carbon-encapsulated CoP (CoP@NC) nanostructures by surface tailoring with ultralow amount (0.56 atomic %) of Ru nanoparticles (2.5 nm). The CoP at the core and the Ru nanoparticles on the shell have a facile charge transfer interaction with the encapsulating NC. The strong coupling of Ru with CoP@NC boosts the electrocatalytic performance toward oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions. The surface-tailored catalyst requires only 35 mV to deliver the benchmark current density of 10 mA·cm-2 for HER. A small potential gap of 620 mV between ORR and OER is achieved, making the catalyst highly suitable for the development of rechargeable zinc-air batteries (ZABs). The homemade ZAB delivers a specific capacity of 780 mA·hgZn-1 and peak power density of 175 mW·cm-2 with a very small voltaic efficiency loss (1.1%) after 300 cycles. The two-electrode water splitting cell (CoP@NC-Ru||CoP@NC-Ru) delivers remarkably low cell voltage of 1.47 V at the benchmark current density. Stable current density of 25 mA·cm-2 for 25 h without any significant change is achieved. Theoretical studies support the charge transfer interaction-induced enhanced electrocatalytic activity of the surface-tailored nanostructure.

MnOx-decorated MOF-derived nickel-cobalt bimetallic phosphide nanosheet arrays for overall water splitting

Exploring non-noble metal dual-functional electrocatalysts with high activity and stability for water splitting is highly desirable. In this study, using zeolitic imidazolate framework-L (ZIF-L) nanoarrays as the precursor, manganese oxide-decorated porous nickel-cobalt phosphide nanosheet arrays have been prepared on nickel foam (denoted as MnOx/NiCoP/NF) through cation etching, phosphorization and electrodeposition, which are utilized as an efficient dual-functional electrocatalyst for overall water splitting. The hierarchical porous nanosheet arrays provide abundant active sites for the electrochemical process, while the MnOx modification induces strong interfacial interaction, benefiting charge transfer. Thus, the MnOx/NiCoP/NF exhibits excellent electrocatalytic activity toward the hydrogen evolution reaction (HER, overpotential of 93 mV at 10 mA cm-2), oxygen evolution reaction (OER, overpotential of 240 mV at 10 mA cm-2) and overall water splitting (cell voltage of 1.59 V at 10 mA cm-2). Furthermore, it shows superior stability during continuous overall water splitting for 200 h. This work provides a simple and effective approach for developing efficient non-noble metal dual-functional catalysts for overall water splitting.

Dopant-Induced Charge Redistribution on the 3D Sponge-like Hierarchical Structure of Quaternary Metal Phosphides Nanosheet Arrays Derived from Metal-Organic Frameworks for Natural Seawater Splitting

Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Engineering Interfacial Built-in Electric Field in Polymetallic Phosphide Heterostructures for Superior Supercapacitors and Electrocatalytic Hydrogen Evolution

Herein, a patterned rod-like CoP@NiCoP core-shell heterostructure is designed to consist of CoP nanowires cross-linked with NiCoP nanosheets in tight strings. The interfacial interaction within the heterojunction between the two components generates a built-in electric field that adjusts the interfacial charge state and create more active sites, accelerating the charge transfer and improving supercapacitor and electrocatalytic performance. The unique core-shell structure suppresses the volume expansion during charging and discharging, achieving excellent stability. As a result, CoP@NiCoP exhibits a high specific capacitance of 2.9 F cm-2 at a current density of 3 mA cm-2 and a high ion diffusion rate (Dion is 2.95 × 10-14  cm2  s-1 ) during charging/discharging. The assembled asymmetric supercapacitor CoP@NiCoP//AC exhibits a high energy density of 42.2 Wh kg-1 at a power density of 126.5 W kg-1 and excellent stability with a capacitance retention rate of 83.8% after 10 000 cycles. Furthermore, the modulated effect induced by the interfacial interaction also endows the self-supported electrode with excellent electrocatalytic HER performance with an overpotential of 71 mV at 10 mA cm-2 . This research may provide a new perspective on the generation of built-in electric field through the rational design of heterogeneous structures for improving the electrochemical and electrocatalytical performance.

Highly Efficient Electrochemical Hydrogen Evolution with Ultra-Low Loading of Strongly Adhered Pt Nanoparticles on Carbon

The development of robust electrocatalysts with low platinum content for acidic hydrogen evolution reaction (HER) is paramount for large scale commercialization of proton exchange membrane electrolyzers. Herein, a simple strategy is reported to synthesize a well anchored, low Pt containing Vulcan carbon catalyst using ZnO as a sacrificial template. Pt containing ZnO (PZ) is prepared by a simultaneous borohydride reduction. PZ is then loaded onto Vulcan carbon to produce a very low Pt content electrocatalyst, PZ@VC. PZ@VC with 2 wt.% Pt shows excellent performance for acidic HER in comparison to the commercial Pt/C (20 wt.%) catalyst. PZ@VC with a very low Pt loading shows significantly low η10 and η100 values (15 and 46 mV, respectively). PZ@VC on coating with Nafion (PZ@VC-N) shows further improvement in its performance (η10 of 7 mV, η100 of 28 mV) with ≈300 h of stability (≈10 mA cm-2 ) with only 4 µgPt cm-2 . PZ@VC-N shows a record high mass activity of 71 A mgPt -1 (32 times larger than Pt/C (20 wt.%) at 50 mV of overpotential. Post reaction characterizations reveal Pt nanoparticles are embedded onto VC with no traces of zinc, suggestive of a strong metal-support interaction leading to this high stability at low Pt loading.

Controlled Surface Modification of Cobalt Phosphide with Sulfur Tunes Hydrogenation Catalysis

Transition metal phosphides have shown promise as catalysts for water splitting and hydrotreating, especially when a small amount of sulfur is incorporated into the phosphides. However, the effect of sulfur on catalysis is not well understood. In part, this is because conventional preparation methods of sulfur-doped transition metal phosphides lead to sulfur both inside and at the surface of the material. Here, we present an alternative method of modifying cobalt phosphide (CoP) with sulfur using molecular S-transfer reagents, namely, phosphine sulfides (SPR3). SPR3 added sulfur to the surface of CoP and using a series of SPR3 reagents having different P═S bond strengths enabled control over the amount and type of sulfur transferred. Our results show that there is a distribution of different sulfur sites possible on the CoP surface with S-binding strengths in the range of 69 to 84 kcal/mol. This provides fundamental information on how sulfur binds to an amorphous CoP surface and provides a basis to assess how number and type of sulfur on CoP influences catalysis. For the catalytic hydrogenation of cinnamaldehyde, intermediate amounts of sulfur with intermediate binding strengths at the surface of CoP were optimal. With some but not too much sulfur, CoP exhibited a higher hydrogenation productivity and a decreased formation of secondary reaction products. Our work provides important insight into the S-effect on the catalysis by transition metal phosphides and opens new avenues for catalyst design.

An amorphous Ni-Fe catalyst for electrocatalytic dehydrogenation of alcohols to value-added chemicals

As for the hydrogen production process via electrocatalytic water splitting, the green and sustainable electro-oxidation of organic molecules at the anode is thermodynamically more favourable than the oxygen evolution reaction (OER). Here, we proposed for the first time to replace the OER process by the oxidation of N-Boc-4-piperidine methanol (BPM), via a parallel reaction, which finally leads to the green production of N-Boc-4-piperidine carboxaldehyde (BPC). The amorphous NiFeO(OH) nanospheres with rich valence states were adopted as the anode catalyst, with creation of more active sites. The gas chromatography results showed that nearly all the BPM converted to BPC after 15 h reaction. The electrochemical tests showed that the Faraday efficiency (FE) approaches nearly 100% when the charge transfer is approximately equal to the theoretical charge. This work reports a new process for the alcohol oxidation, providing a valuable green organic synthesis process.

A Green Synthesis Strategy for Cobalt Phosphide Deposited on N, P Co-Doped Graphene for Efficient Hydrogen Evolution

The exploitation of electrocatalysts with high activity and durability for the hydrogen evolution reaction is significant but also challenging for future energy systems. Transition metal phosphides (TMPs) have attracted a lot of attention due to their effective activity for the hydrogen evolution reaction, but the complicated preparation of metal phosphides remains a bottleneck. In this study, a green fabrication method is designed and proposed to construct N, P co-doped graphene (NPG)-supported cobalt phosphide (Co2P) nanoparticles by using DNA as both N and P sources. Thanks to the synergistic effect of NPG and Co2P, the Co2P/NPG shows effective activity with a small overpotential of 144 mV and a low Tafel slope of 72 mV dec-1 for the hydrogen evolution reaction. This study describes a successful green synthesis strategy for the preparation of high-performance TMPs.

Construction of an Amethyst-like MoS2@Ni9S8/Co3S4 Rod Electrocatalyst for Overall Water Splitting

Transition metal sulphide electrocatalytic materials possess the bright overall water-splitting performance of practical electrocatalytic technologies. In this study, an amethyst-like MoS2@Ni9S8/Co3S4 rod electrocatalyst was constructed via a one-step hydrothermal method with in-situ-grown ZIF-67 nanoparticles on nickel foam (NF) as a precursor. The rational design and synthesis of MoS2@Ni9S8/Co3S4 endow the catalyst with neat nanorods morphology and high conductivity. The MoS2@Ni9S8/Co3S4/NF with the amethyst-like rod structure exposes abundant active sites and displays fast electron-transfer capability. The resultant MoS2@Ni9S8/Co3S4/NF exhibits outstanding hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activities, with low overpotentials of 81.24 mV (HER) at 10 mA cm-2 and 159.67 mV (OER) at 50 mA cm-2 in 1.0 M KOH solution. The full-cell voltage of overall water splitting only achieves 1.45 V at 10 mA cm-2. The successful preparation of the amethyst-like MoS2@Ni9S8/Co3S4 rod electrocatalyst provides a reliable reference for obtaining efficient electrocatalysts for overall water splitting.

A Little Nickel Goes a Long Way: Ni Incorporation into Rh2P for Stable Bifunctional Electrocatalytic Water Splitting in Acidic Media

In acidic media, many transition-metal phosphides are reported to be stable catalysts for the hydrogen evolution reaction (HER) but typically exhibit poor stability toward the corresponding oxygen evolution reaction (OER). A notable exception appears to be Rh2P/C nanoparticles, reported to be active and stable toward both the HER and OER. Previously, we investigated base-metal-substituted Rh2P, specifically Co2-xRhxP and Ni2-xRhxP, for HER and OER as a means to reduce the noble-metal content and tune the reactivity for these disparate reactions. In alkaline media, the Rh-rich phases were found to be most active for the HER, while base-metal-rich phases were found to be the most active for the OER. However, Co2-xRhxP was not stable in acidic media due to the dissolution of Co. In this study, the activity and stability of our previously synthesized Ni2-xRhxP nanoparticle catalysts (x = 0, 0.25, 0.50, 1.75) toward the HER and OER in acidic electrolyte are probed. For the HER, the Ni0.25Rh1.75P phase was found to have comparable geometric activity (overpotential at 10 mA/cmgeo2) and stability to Rh2P. In contrast, for OER, all of the tested Ni2-xRhxP phases had similar overpotential values at 10 mA/cmgeo2, but these were >2x the initial value for Rh2P. However, the activity of Rh2P fades rapidly, as does Ni2P and Ni-rich Ni2-xRhxP phases, whereas Ni0.25Rh1.75P shows only modest declines. Overall water splitting (OWS) conducted using Ni0.25Rh1.75P as a catalyst relative to the state-of-the-art (RuO2||20% Pt/C) revealed comparable stabilities, with the Ni0.25Rh1.75P system demanding an additional 200 mV to achieve 10 mA/cmgeo2. In contrast, a Rh2P||Rh2P OWS cell had a similar initial overpotential to RuO2||20% Pt/C, but is unstable, completely deactivating over 140 min. Thus, Rh2P is not a stable anode for the OER in acidic media, but can be stabilized, albeit with a loss of activity, by incorporation of nominally modest amounts of Ni.

NiMo-MOF-Derived Carbon-Armored Ni4Mo Alloy of an Interwoven Nanosheet Structure as an Outstanding pH-Universal Catalyst for Hydrogen Evolution Reaction at High Current Densities

Development of highly efficient and stable non-precious metal-based pH-universal catalysts for hydrogen evolution reaction (HER) at high current densities remains challenging for water electrolysis-based green hydrogen production. Herein, a simple solvothermal process was developed to synthesize a NiMo metal-organic framework (MOF), from which a carbon-armored Ni₄Mo alloy of an interwoven nanosheet structure was derived with a two-stage thermal treatment, to serve as a high-performance pH-universal HER catalyst. It requires low overpotentials of 22, 48, and 98 mV to achieve a current density of -10 mA cm^-2 and 192, 267, and 360 mV to deliver an ultrahigh current density of -500 mA cm^-2 in alkaline, acidic, and neutral media, respectively, and exhibits remarkable operational stability at an ultrahigh initial current density of -500 mA cm^-2 for over 50 h, making it promising for applications in large-scale green hydrogen production. The success can be attributed to the unique catalyst design of a carbon-armored, composition-optimized NiMo alloy of an advantageous nanostructure of interwoven nanosheets for enhanced utilization of active sites and mass transfer of electrolytes and gaseous products, made possible with a MOF-derivation fabrication approach.

Interfacial engineering and chemical reconstruction of Mo/Mo2C@CoO@NC heterostructure for promoting oxygen evolution reaction

Chemical reorganization and interfacial engineering in hybrid nanomaterials are promising strategies for enhancing electrocatalytic performance. Herein, MoO₃@zeolitic imidazolate framework-67 (ZIF-67) heterogeneous nanoribbons are designed through coordination assembly. By following heat treatment, a Mo/Mo₂C@CoO@NC heterostructure with nitrogen-doped carbon-encapsulated CoO hexagons (CoO@NC) anchored on the Mo/Mo₂C jag matrix was fabricated. Notably, through controllable experimental optimization, the as-prepared Mo/Mo₂C@CoO@NC heterostructure exhibits numerous active centers (e.g. Mo, Mo₂C, CoO, and NC), fully exposed active sites (numerous pores and jagged structures), and abundant heterointerfaces (Mo/Mo₂C, Mo₂C/CoO@NC, Mo₂C/amorphous, and CoO@NC/amorphous), and exhibits good conductivity (localized single-crystal behavior, graphitized carbon). As a result, the as-developed Mo/Mo₂C@CoO@NC heterostructures inherit impressive oxygen evolution reaction (OER) performance with an overpotential of only 215 mV at 10 mA cm^-2. Furthermore, Mo/Mo₂C@CoO@NC heterostructures exhibit excellent stability with a current density retention of 98.4% after 20 h chronoamperometry. This work provides deep insights into chemical reconstructions and tuning heterointerfaces to efficiently enhance the OER activity of heterostructure-based electrocatalysts.

Unveiling the Metal Incorporation Effect of Steady-Active FeP Hydrogen Evolution Nanocatalysts for Water Electrolyzer

Metal phosphides are promising noble metal-free electrocatalysts for hydrogen evolution reaction (HER), but they usually suffer from inferior stability and thus are far from the device applications. We reported a facile and controllable synthetic method to prepare metal-incorporated M-FeP nanoparticles (M=Cr, Mn, Co, Fe, Ni, Cu, and Mo) with the guide of the density functional theory (DFT). The evaluated HER activity sequence was consistent with the DFT predictions, and cobalt was revealed to be the appropriate dopant. With the optimization of the Co/Fe ratio, the Fe_0.67 Co_0.33 P/C only required overpotentials of 67 mV and 129 mV to obtain the cathodic current density of 10 and 100 mA cm^-2, respectively. It maintained the initial activity in the 10 h stability test, surpassing the other Co-FeP/C catalysts. Ex situ experiments demonstrated that the decreased element leaching and the increased surface phosphide content contributed to the high stability of the Fe_0.67 Co_0.33 P/C. A proton exchange membrane water electrolyzer was assembled using the Fe_0.67 Co_0.33 P/C as the cathodic catalyst. It showed a current density of 0.8 A cm^-2 at the applied voltage of 2.0 V and retained the initial activity in the 1000 cycles' stability test, suggesting the potential application of the catalysts.

Ni5P4-NiP2-Ni2P Nanocomposites Tangled with N-Doped Carbon for Enhanced Electrochemical Hydrogen Evolution in Acidic and Alkaline Solutions

Heterostructured non-precious metal phosphides have attracted increasing attention in the development of high-performance catalysts for hydrogen evolution reaction (HER), particularly in acidic media. Herein, a catalyst composed of ternary Ni5P4-NiP2-Ni2P nanocomposites and N-doped carbon nanotubes/carbon particulates (Ni5P4-NiP2-Ni2P/NC) was prepared from a Ni-containing hybrid precursor through approaches of a successive carbonization and phosphating reaction. Benefiting from the synergistic effect from three-component nickel phosphides and the support role of porous carbon network, the Ni5P4-NiP2-Ni2P/N-doped carbon catalyst presents the promising HER performance with overpotentials of 168 and 202 mV at the current density of 10 mA cm−2 and Tafel slopes of 69.0 and 74 mV dec−1 in both acidic and alkaline solutions, respectively, which surpasses the Ni2P/N-doped carbon counterpart. This work provides an effective strategy for the preparation and development of highly efficient HER non-precious metal electrocatalysts by creating heterostructure in acidic and alkaline media.

Se-Doped Ni5P4 Nanocatalysts for High-Efficiency Hydrogen Evolution Reaction

Increasing energy consumption and environmental pollution problems have forced people to turn their attention to the development and utilization of hydrogen energy, which requires that hydrogen energy can be efficiently prepared. However, the sluggish kinetics of hydrogen evolution reaction (HER) requires higher overpotential. It is urgent to design and fabricate catalysts to drive the procedure and decrease the overpotential of HER. It is well known that platinum catalysts are the best for HER, but their high cost limits their wide application. Transition metals such as Fe, Co, Mo and Ni are abundant, and transition metal phosphides are considered as promising HER catalysts. Nevertheless, catalysts in powder form are very easily soluble in the electrolyte, which leads to inferior cycling stability. In this work, Ni5P4 anchored on Ni foam was doped with Se powder. After SEM characterization, the Ni5P4-Se was anchored on Ni foam, which circumvents the use of the conductive additives and binder. The Ni5P4-Se formed a porous nanosheet structure with enhanced electron transfer capability. The prepared Ni5P4-Se exhibited high electrochemical performances. At 10 mA cm−2, the overpotential was only 128 mV and the Tafel slope is 163.14 mV dec−1. Additionally, the overpotential was stabilized at 128 mV for 30 h, suggesting its excellent cycling stability. The results show that Se doping can make the two phases achieve a good synergistic effect, which makes the Ni5P4-Se catalyst display excellent HER catalytic activity and stability.

Recent Advances Regarding Precious Metal-Based Electrocatalysts for Acidic Water Splitting

Electrochemical water splitting has wide applicability in preparing high-density green energy. The Proton exchange membrane (PEM) water electrolysis system is a promising technique for the generation of hydrogen due to its high electrolytic efficiency, safety and reliability, compactness, and quick response to renewable energy sources. However, the instability of catalysts for electrochemical water splitting under operating conditions limits their practical applications. Until now, only precious metal-based materials have met the requirements for rigorous long-term stability and high catalytic activity under acid conditions. In this review, the recent progress made in this regard is presented and analyzed to clarify the role of precious metals in the promotion of the electrolytic decomposition of water. Reducing precious metal loading, enhancing catalytic activity, and improving catalytic lifetime are crucial directions for developing a new generation of PEM water electrolysis catalysts. A summary of the synthesis of high-performance catalysts based on precious metals and an analysis of the factors affecting catalytic performance were derived from a recent investigation. Finally, we present the remaining challenges and future perspectives as guidelines for practical use.

Boosting Hydrogen Evolution Electrocatalysis via Regulating the Electronic Structure in a Crystalline-Amorphous CoP/CeOx p-n Heterojunction

The modulation of the electronic structure is the effective access to achieve highly active electrocatalysts for the hydrogen evolution reaction (HER). Transition-metal phosphide-based heterostructures are very promising in enhancing HER performance but the facile fabrication and an in-depth study of the catalytic mechanisms still remain a challenge. In this work, the catalytically inactive n-type CeOx is successfully combined with p-type CoP to form the CoP/CeOx heterojunction. The crystalline-amorphous CoP/CeOx heterojunction is fabricated by the phosphorization of predesigned Co(OH)2/CeOx via the as-developed reduction-hydrolysis strategy. The p-n CoP/CeOx heterojunction with a strong built-in potential of 1.38 V enables the regulation of the electronic structure of active CoP within the space-charge region to enhance its intrinsic activity and facilitate the electron transfer. The functional CeOx entity and the negatively charged CoP can promote the water dissociation and optimize H adsorption, synergistically boosting the electrocatalytic HER output. As expected, the heterostructured CoP/CeOx-20:1 with the optimal ratio of Co/Ce shows significantly improved HER activity and favorable kinetics (overpotential of 118 mV at a current density of 10 mA cm-2 and Tafel slope of 77.26 mV dec-1). The present study may provide new insight into the integration of crystalline and amorphous entities into the p-n heterojunction as a highly efficient electrocatalyst for energy storage and conversion.

Strategies to improve electrocatalytic performance of MoS2-based catalysts for hydrogen evolution reactions

Electrocatalytic hydrogen evolution reactions (HERs) are a key process for hydrogen production for clean energy applications. HERs have unique advantages in terms of energy efficiency and product separation compared to other methods. Molybdenum disulfide (MoS2) has attracted extensive attention as a potential HER catalyst because of its high electrocatalytic activity. However, the HER performance of MoS2 needs to be improved to make it competitive with conventional Pt-based catalysts. Herein, we summarize three typical strategies for promoting the HER performance, i.e., defect engineering, heterostructure formation, and heteroatom doping. We also summarize the computational density functional theory (DFT) methods used to obtain insight that can guide the construction of MoS2-based materials. Additionally, the challenges and prospects of MoS2-based catalysts for the HER have also been discussed.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Pt- and Pd-modified transition metal nitride catalysts for the hydrogen evolution reaction

Hydrogen production via electrochemical splitting of water using renewable electricity represents a promising strategy. Currently, platinum group metals (PGMs) are the best performing hydrogen evolution reaction (HER) catalysts. Thus, the design of non-PGM catalysts or low-loading PGM catalysts is essential for the commercial development of hydrogen generation technologies via electrochemical splitting of water. Here, we employed density functional theory (DFT) calculations to explore Pt and Pd modified transition metal nitrides (TMNs) as low-cost HER catalysts. Our calculations show that Pt/Pd binds strongly with TMs on TMN(111) surfaces, leading to the formation of stable Pt and Pd-monolayer (ML)-TMN(111) structures. Furthermore, our calculated hydrogen binding energy (HBE) demonstrates that Pt/MnN, Pt/TiN, Pt/FeN, Pt/VN, Pt/HfN, Pd/FeN, Pd/TaN, Pd/NbN, Pd/TiN, Pd/HfN, Pd/MnN, Pd/ScN, Pd/VN, and Pd/ZrN are promising candidates for the HER with a low value of limiting potential (U_L) similar to that calculated on Pt(111).

Single source precursor route for the first graphene oxide-Pd6P nanocomposite: application in electrochemical hydrogen evolution reaction

For the first time, Pd₆P has been synthesised using a simple, straightforward and one-pot method i.e., thermolysis of a Pd(II) complex of a bidentate (P, N) organophosphorus ligand (anthracene-9-yl-CHN-CH₂CH₂-PPh₂). The electrocatalyst (obtained after grafting nanospheres of Pd₆P over layers of graphene oxide) shows high activity in electrochemical hydrogen evolution reactions (HER) with an overpotential of 133 mV to drive 10 mA cm^-2 of cathodic current density. The GO-Pd₆P nanocomposite is robust and effective for a continuous HER run for up to 16 hours.

Heterointerface and Defect Dual Engineering in a Superhydrophilic Ni2P/WO2.83 Microsphere for Boosting Alkaline Hydrogen Evolution Reaction at High Current Density

Developing a high-performance electrocatalyst for hydrogen evolution reaction (HER) requires a comprehensive consideration of the three key factors, that is, intrinsic activity, electric conductivity, and active site number. Herein, we report the facile synthesis of a self-supported Ni₂P/WO_2.83 heterointerface microsphere as a highly active and low-cost catalyst for alkaline HER, which has simultaneously addressed these key issues by a joint application of heterointerface construction and defect and architecture engineering strategies. Our density functional theory calculations revealed Ni₂P and WO_2.83 optimized by the interface coupling effect work in concert to improve the intrinsic activity of the catalyst. Importantly, the metalloid Ni₂P in an intimate combination with the oxygen-defect-rich WO_2.83 species endowed the electrocatalyst with high conductivity. Furthermore, the Ni₂P/WO_2.83 electrocatalyst presented a superhydrophilic nanostructure, ensuring abundant active sites and their accessibility. Benefiting from these attributes, the obtained Ni₂P/WO_2.83 heterointerface electrocatalyst exhibited excellent activity along with favorable stability for alkaline HER, especially at high current density, surpassing the most reported non-precious catalysts.

Bridging electrocatalyst and cocatalyst studies for solar hydrogen production via water splitting

Solar-driven water-splitting has been considered as a promising technology for large-scale generation of sustainable energy for succeeding generations. Recent intensive efforts have led to the discovery of advanced multi-element-compound water-splitting electrocatalysts with very small overpotentials in anticipation of their application to solar cell-assisted water electrolysis. Although photocatalytic and photoelectrochemical water-splitting systems are more attractive approaches for scaling up without much technical complexity and high investment costs, improving their efficiencies remains a huge challenge. Hybridizing photocatalysts or photoelectrodes with cocatalysts has been an effective scheme to enhance their overall solar energy conversion efficiencies. However, direct integration of highly-active electrocatalysts as cocatalysts introduces critical factors that require careful consideration. These additional requirements limit the design principle for cocatalysts compared with electrocatalysts, decelerating development of cocatalyst materials. This perspective first summarizes the recent advances in electrocatalyst materials and the effective strategies to assemble cocatalyst/photoactive semiconductor composites, and further discusses the core principles and tools that hold the key in designing advanced cocatalysts and generating a deeper understanding on how to further push the limits of water-splitting efficiency.