Ordered PdCu-Based Core-Shell Concave Nanocubes Enclosed by High-Index Facets for Ethanol Electrooxidation

Insights into the Corrosion of Pd-Pt-Co Core-Shell Nanocubes and Their Evolved Heterostructures as Active Methanol Oxidation Reaction Electrocatalysts

Unraveling the corrosion dynamics of nanocrystal electrocatalysts is crucial for their rational design and practical application. Meanwhile, top-down corrosion processes can lead to the formation of novel heterostructures with enhanced physicochemical properties for catalytic applications. Herein, we encapsulate Pt and PtCo shells on Pd nanocubes to systematically study the distinct corrosion behaviors induced by transition metal incorporation. The results reveal that the core of Pd@PtCo nanocubes undergoes dominant etching at the terraces, in stark contrast to the corner-focused corrosion on the Pd cores observed in Pd@Pt nanocubes. Mechanistic insights were obtained through transmission electron microscopy analysis, revealing corrosion-induced concave Pd@PtCo nanocubes with abundant atomic steps. These unique heterostructures exhibit exceptional performance in the methanol oxidation reaction, achieving mass and specific activities 10 and 27 times higher, respectively, than those of commercial catalysts. These results enhance our understanding of the corrosion dynamics in noble-metal heterostructures and provide valuable insights into the development of efficient and durable electrocatalysts.

PdPtCu mesoporous nanocube-based electrochemical sandwich immunosensor for detection of HIV-p24

The construction of simple, stable, low-cost and reproducible enzyme-free electrochemical biosensors can effectively avoid the problem of signal attenuation caused by enzyme inactivation. Hererin, we prepared a novel nanoenzymes PdPtCu mesoporous nanocubes (MNCs) to construct a label-free sandwich electrochemical immunosensor for the highly sensitivity detection of HIV-p24. PdPtCu MNCs have excellent peroxidase activity against hydrogen peroxide (H2O2) due to their synergistic ternary composition, large surface area and ability to penetrate mesoporous channels. Moreover, highly conductive and biocompatible gold nanoparticles@graphene oxide (AuNPs@GO) was introduced as a substrate to modify a glassy carbon electrode (GCE). Owing to the excellent electrochemical performance of the PdPtCu MNCs and AuNPs@GO, the developed immunosensors exhibited a good linear response from 0.04 pg/mL to 100 ng/mL with a low detection limit of 20 fg/mL. In addition, the established method exhibited excellent practical performance in human serum. This novel strategy provides a promising platform for ultrasensitive detection of the HIV-p24 in the field of clinical diagnostics.

Kinetics-Driven Crystal Facet Evolution Mechanism of Atomically Ordered Intermetallic PtFe Nanocubes toward Electrochemical Catalysis

Crystal structure engineering in nanoparticles has been regarded as a vital method in catalyst development and design. Herein, PtFe nanocubes, manufactured with ordered PtFe intermetallic structure and a desired facet of {202}, have been successfully prepared via the combination of selective deposition strategy and spatial barrier effect. In-situ X-ray photoelectron spectroscopy found that the growth of the high-index facet and formation of the nanocube for o-PtFe-202 materials arise from the surface Fe2+ modification stabilized effect and the selective deposition of Cl-, respectively. Moreover, density functional theory calculations and X-ray adsorption spectroscopies further proved that the improved oxygen reduction reaction activity and stability of o-PtFe-202 mainly originate from the synergistic effect of the desired high-index facet, ordered crystal structure, and resulting optimal d-band center of Pt. As expected, the o-PtFe-202 exhibits excellent mass activity (2.48 mA·ugPt-1) and specific activity (7.78 mA·cm-2), with only a 7.3% decrease in mass activity after 30 000 cycles.

Strain Effects in Ru-Au Bimetallic Aerogels Boost Electrocatalytic Hydrogen Evolution

To improve the sluggish kinetics of the hydrogen evolution reaction (HER), a key component in water-splitting applications, there is an urgent desire to develop efficient, cost-effective, and stable electrocatalysts. Strain engineering is proving an efficient strategy for increasing the catalytic activity of electrocatalysts. This work presents the development of Ru-Au bimetallic aerogels by a simple one-step in situ reduction-gelation approach, which exhibits strain effects and electron transfer to create a remarkable HER activity and stability in an alkaline environment. The surface strain induced by the bimetallic segregated structure shifts the d-band center downward, enhancing catalysis by balancing the processes of water dissociation, OH* adsorption, and H* adsorption. Specifically, the optimized catalyst shows low overpotentials of only 24.1 mV at a current density of 10 mA cm-2 in alkaline electrolytes, surpassing commercial Pt/C. This study can contribute to the understanding of strain engineering in bimetallic electrocatalysts for HER at the atomic scale.

Recent advances of H-intercalated Pd-based nanocatalysts for electrocatalytic reactions

The intercalation of H into Pd-based nanocatalysts plays a crucial role in optimizing the catalytic performance by tailoring the structural and electronic properties. We herein present a comprehensive review about the recent progress of interstitial hydrogen atom modified Pd-based nanocatalysts for various energy-related electrocatalytic reactions. Before systematically manifesting the great potential of Pd-based hydrides for electrocatalytic applications, we have briefly illustrated the synthesis strategies and corresponding mechanisms for the Pd-based hydrides. This is followed by a comprehensive discussion about the fundamentals and functions of H intercalation in tailoring their physicochemical and electrochemical properties. Subsequently, we focus on the widespread application of Pd-based hydrides for electrocatalytic reactions, with the emphasis on the role of H intercalation played in determining electrocatalytic performance. Finally, the future direction and perspectives regarding the development of more efficient Pd-based hydrides are also manifested.

Photoelectrocatalytic oxidation of ethylene glycol on trimetallic PdAgCu nanospheres enhanced by surface plasmon resonance

The notable surface plasmon resonance (SPR) effect of some metals has been applied to improve the efficiency of alcohol oxidation reactions, whereas the comprehensive investigation of Cu-assisted photoelectrocatalysis remains challenging. We herein successfully prepared trimetallic PdAgCu nanospheres (NSs) with abundant surface bulges for the advanced ethylene glycol oxidation reaction (EGOR) and compared them with bimetallic PdAg NSs to investigate the performance enhancement mechanism. Impressively, the as-optimized PdAgCu NSs exhibited superb mass activity and electrochemical stability. Moreover, under visible light illumination, the mass activity of PdAgCu NSs increased to 1.62 times compared to that in the dark, and in contrast, the mass activity of PdAg NSs only increased to 1.48 times that in the dark. A mechanistic study indicated that the incorporation of Cu not only strengthens the whole SPR effect of PdAgCu NSs but also further modifies the electronic structure of Pd. This work highlighted that the incorporation of Cu into PdAg NSs further enhanced the photoelectrocatalytic performance and increased noble metal atom utilization, which may provide guidance to fabricate novel and promising nanocatalysts in the field of photoelectrocatalysis.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

One Stone Two Birds: Unlocking the Synergy between Amorphous Ni(OH)2 and Pd Nanocrystals toward Ethanol and Formic Acid Oxidation

Even though extensive efforts have been devoted to mixing Pd nanocrystals with Ni(OH)₂ for the enhanced synergy, it remains a great challenge to incorporate nanosized Ni(OH)₂ species on the Pd electrode and reveal their synergy. Herein, we present spongelike Pd nanocrystals with the modification of amorphous Ni(OH)₂ species. The catalyst configuration is first considered by compositing Pd with Ni(OH)₂ species to optimize the Pd-Pd interatomic distance and then constructing a strongly coupled interface between Pd nanostructures and Ni(OH)₂ species. For the ethanol oxidation reaction (EOR) and the formic acid oxidation reaction (FAOR), Pd-Ni(OH)₂ composites exhibit an impressive mass activity of 4.98 and 2.65 A mg_Pd^-1, respectively. Most impressively, there is no significant decrease in the EOR activity during five consecutive cycles (50 000 s). A series of CO-poisoning tests have proved that the enhanced EOR and FAOR performances involve synergy between Pd nanostructures and Ni(OH)₂ species.

Tuning the Selective Ethanol Oxidation on Tensile-Trained Pt(110) Surface by Ir Single Atoms

Development of efficient and robust electrocatalysts for complete oxidation of ethanol is critical for the commercialization of direct ethanol fuel cells. However, the complete oxidation of ethanol suffers from poor efficiency due to the low C1 pathway selectivity. Herein, single-atomic Ir (Ir₁ ) on hcp-PtPb/fcc-Pt core-shell hexagonal nanoplates (PtPb@PtIr₁ HNPs) enclosed by Pt(110) surface with a 7.2% tensile strain is constructed to drive complete electro-oxidation of ethanol. Benefiting from the construction of Ir₁ sites, the PtPb@PtIr₁ HNPs exhibit a Faraday efficiency of 57.93% for the C1 pathway, which is ≈8.3 times higher than that of the commercial Pt/C-JM. Furthermore, the PtPb@PtIr₁ HNPs show a top-ranked electro-activity achieving 45.1-fold and 56.3-fold higher than the specific and mass activities of Pt/C-JM, respectively. Meanwhile, the durability can be significantly enhanced by the construction of Ir₁ sites. Density functional theory calculations indicate that the strong synergy on the PtPb@PtIr₁ HNPs surface significantly promotes the breaking of CC bond of CH₂ CO* and facilitates CO oxidation and suppresses the deactivation of the catalyst. This work offers a unique single-atom approach using low-coordination active sites on shape-controlled nanocrystals to tune the selectivity and activity toward complicated catalytic reactions.