Interface Engineering of Heterogeneous CeO2-CoO Nanofibers with Rich Oxygen Vacancies for Enhanced Electrocatalytic Oxygen Evolution Performance

Synergistic enhancement of oxygen vacancy enrichment and morphology regulation in CeO2-NiCo2O4 heterostructure catalysts for high-performance cathodes in direct borohydride-hydrogen peroxide fuel cells

Hydrogen peroxide (H2O2) emerges as a viable oxidant for fuel cells, necessitating the development of an efficient and cost-effective electrocatalyst for the hydrogen peroxide reduction reaction (HPRR). In this study, we synthesized a self-supporting, highly active HPRR electrocatalyst comprising two morphologically distinct components: CeO2-NiCo2O4 nanowires and CeO2-NiCo2O4 metal organic framework derivatives, via a two-step hydrothermal process followed by air calcination. X-ray diffraction and transmission electron microscopy analysis confirmed the presence of CeO2 and NiCo2O4, revealing the amalgamated interface between them. CeO2 exhibits multifunctionality in regulating the surface electronic configuration of NiCo2O4, fostering synergistic connections, and introducing oxygen deficiencies to enhance the catalytic efficacy in HPRR. Electrochemical measurements demonstrate a reduction current density of 789.9 mA·cm-2 at -0.8 V vs. Ag/AgCl. The assembly of direct borohydride-hydrogen peroxide fuel cell (DBHPFC) exhibits a peak power density of 45.2 mW·cm-2, demonstrating durable stability over a continuous operation period of 120 h. This investigation providing evidence that the fabrication of heterostructured catalysts based on CeO2 for HPRR is a viable approach for the development of high-efficiency electrocatalysts in fuel cell technology.

Cerium-Doped Nickel Sulfide Nanospheres as Efficient Catalysts for Overall Water Splitting

The development of non-precious metal electrocatalysts with excellent activity and durability for electrochemical water splitting has always been a goal. Transition metal sulfides are attractive electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this article, we designed and constructed efficient catalysts with multiple synergistic interactions and synthesized Ce-NiS2@NF nanosphere using a solvothermal method. Ce-NiS2@NF exhibits excellent HER performance, OER performance, and overall water splitting capability in alkaline electrolytes, demonstrating good stability. The addition of Ce influences the activity of the catalysts, attributed to the synergistic interactions creating more active sites and higher intrinsic activity through the introduction of Ce heteroatoms. Additionally, the self-supported conductive substrate promotes electron transfer, enhancing the intrinsic activity and active site density of the catalyst. This study provides an in-depth investigation into structural design and performance enhancement, offering ideas for designing efficient catalysts for overall water electrolysis. This work provides an in-depth study in terms of structural design performance enhancement and provides ideas for designing efficient alkaline bifunctional catalysts. Valuable insights have been provided in elucidating the intrinsic mechanism of the catalytic activity of cerium-doped nickel sulfide nanospheres, thus providing new guidance in the field of energy conversion technology.

Interface Engineering of the Cu1.5Mn1.5O4/CeO2 Heterostructure for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia

The electrochemical nitrate reduction reaction (NO3RR) is considered a sustainable technology to convert the nitrate pollutants to ammonia. However, developing highly efficient electrocatalysts is necessary and challenging given the slow kinetics of the NO3RR with an eight-electron transfer process. Here, a Cu1.5Mn1.5O4 (CMO)/CeO2 heterostructure with rich interfaces is designed and fabricated through an electrospinning and postprocessing technique. Benefiting from the strong coupling between CMO and CeO2, the optimized CMO/CeO2-2 catalyst presents excellent NO3RR performance, with NH3 Faraday efficiency (FE) up to 93.07 ± 1.45% at -0.481 V vs reversible hydrogen electrode (RHE) and NH3 yield rate up to 48.06 ± 1.32 mg cm-2 h-1 at -0.681 V vs RHE. Theoretical calculations demonstrate that the integration of CeO2 with CMO modulates the adsorption/desorption process of the reactants and intermediates, showing a reduced energy barrier in the rate determination step of NO* to N* and achieving an outstanding NO3RR performance.

Facile synthesis of CeO2-decorated W@Co-MOF heterostructures as a highly active and durable electrocatalyst for overall water splitting

Rational coupling of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalysts is extremely important for practical overall water splitting; however, it is still challenging to construct such bifunctional heterostructures. Herein, a CeO2/W@Co-MOF/NF bifunctional electrocatalyst was prepared via a two-step in situ growth method involving an electrodeposition process. The incorporation of the W element enhanced the electronic interaction and enlarged the electrochemical surface area. After the electrodeposition of CeO2, the obtained CeO2/W@Co-MOF/NF possessed abundant heterointerfaces with a modulated local distribution, which promoted water dissociation and rapid electrocatalytic kinetics. In particular, it required very low overpotentials of 239 mV and 87 mV to reach a current density of 10 mA cm-2 in OER and HER, respectively. A corresponding alkaline electrolysis cell afforded a cell voltage of 1.54 V at 10 mA cm-2 to boost overall water splitting. This work provides a feasible strategy to fabricate MOF-based complexes and explores their possible use as bifunctional catalysts toward overall water splitting.

Modification strategies for semiconductor metal oxide nanomaterials applied to chemiresistive NOx gas sensors: A review

Semiconductor metal oxides (SMOs) nanomaterials are a category of sensing materials that are widely applied to chemiresistive NOx gas sensors. However, there is much space to improve the sensing performance of SMOs nanomaterials. Therefore, how to improve the sensing performance of SMOs nanomaterials for NOx gases has always attracted the interest of researchers. Up to now, there are few reviews focus on the modification strategies of SMOs which applied to NOx gas sensors. In order to compensate for the limitation, this review summarizes the existing modification strategies of SMOs, hoping to provide researchers a view of the research progress in this filed as comprehensive as possible. This review focuses on the progress of the modification of SMOs nanomaterials for chemiresistive NOx (NO, NO2) gas sensors, including the morphology modulation of SMOs, compositing SMOs, loading noble metals, doping metal ions, compositing with carbon nanomaterials, compositing with biomass template, and compositing with MXene, MOFs, conducting polymers. The mechanism of each strategy to enhance the NOx sensing performance of SMOs-based nanomaterials is also discussed and summarized. In addition, the limitations of some of the modification strategies and ways to address them are discussed. Finally, future perspectives for SMOs-based NOx gas sensors are also discussed.

RuO2 Catalysts for Electrocatalytic Oxygen Evolution in Acidic Media: Mechanism, Activity Promotion Strategy and Research Progress

Proton Exchange Membrane Water Electrolysis (PEMWE) under acidic conditions outperforms alkaline water electrolysis in terms of less resistance loss, higher current density, and higher produced hydrogen purity, which make it more economical in long-term applications. However, the efficiency of PEMWE is severely limited by the slow kinetics of anodic oxygen evolution reaction (OER), poor catalyst stability, and high cost. Therefore, researchers in the past decade have made great efforts to explore cheap, efficient, and stable electrode materials. Among them, the RuO2 electrocatalyst has been proved to be a major promising alternative to Ir-based catalysts and the most promising OER catalyst owing to its excellent electrocatalytic activity and high pH adaptability. In this review, we elaborate two reaction mechanisms of OER (lattice oxygen mechanism and adsorbate evolution mechanism), comprehensively summarize and discuss the recently reported RuO2-based OER electrocatalysts under acidic conditions, and propose many advanced modification strategies to further improve the activity and stability of RuO2-based electrocatalytic OER. Finally, we provide suggestions for overcoming the challenges faced by RuO2 electrocatalysts in practical applications and make prospects for future research. This review provides perspectives and guidance for the rational design of highly active and stable acidic OER electrocatalysts based on PEMWE.

Recent Advances in Engineering of 2D Materials-Based Heterostructures for Electrochemical Energy Conversion

2D materials, such as graphene, transition metal dichalcogenides, black phosphorus, layered double hydroxides, and MXene, have exhibited broad application prospects in electrochemical energy conversion due to their unique structures and electronic properties. Recently, the engineering of heterostructures based on 2D materials, including 2D/0D, 2D/1D, 2D/2D, and 2D/3D, has shown the potential to produce synergistic and heterointerface effects, overcoming the inherent restrictions of 2D materials and thus elevating the electrocatalytic performance to the next level. In this review, recent studies are systematically summarized on heterostructures based on 2D materials for advanced electrochemical energy conversion, including water splitting, CO2 reduction reaction, N2 reduction reaction, etc. Additionally, preparation methods are introduced and novel properties of various types of heterostructures based on 2D materials are discussed. Furthermore, the reaction principles and intrinsic mechanisms behind the excellent performance of these heterostructures are evaluated. Finally, insights are provided into the challenges and perspectives regarding the future engineering of heterostructures based on 2D materials for further advancements in electrochemical energy conversion.

Electrochemical Etching Switches Electrocatalytic Oxygen Evolution Pathway of IrOx /Y2 O3 from Adsorbate Evolution Mechanism to Lattice-Oxygen-Mediated Mechanism

Oxygen evolution reaction (OER) plays key roles in electrochemical energy conversion devices. Recent advances have demonstrated that OER catalysts through lattice oxygen-mediated mechanism (LOM) can bypass the scaling relation-induced limitations on those catalysts through adsorbate evolution mechanism (AEM). Among various catalysts, IrOx , the most promising OER catalyst, suffers from low activities for its AEM pathway. Here, it is demonstrated that a pre-electrochemical acidic etching treatments on the hybrids of IrOx and Y2 O3 (IrOx /Y2 O3 ) switch the AEM-dominated OER pathway to LOM-dominated one in alkali electrolyte, delivering a high performance with a low overpotential of 223 mV at 10 mA cm-2 and a long-term stability. Mechanism investigations suggest that the pre-electrochemical etching treatments create more oxygen vacancies in catalysts due to the dissolution of yttrium and then provide highly active surface lattice oxygen for participating OER, thereby enabling the LOM-dominated pathway and resulting in a significantly increased OER activity in basic electrolyte.

Sonication strategy for anchoring single metal atom oxides (W, Cu, Co) on CeO2-rGO for boosting electrocatalytic oxygen evolution reaction

In the field of electrocatalysis, single-atomic-layer tungsten, copper, and cobalt oxide on CeO2, ethylene diamine (ED) and reduced graphene oxide (rGO) supported materials shows tremendous potential. Despite the enormous interest in single metal atom oxide (SMAO) catalysts, it is still very difficult to directly convert readily available bulk metal oxide into single atom oxide. It is crucial and tough to create high performance materials for the oxygen evolution reaction (OER) in an alkaline environment. Herein, a single tungsten, copper and cobalt atom oxide (SMAO) anchored on the CeO2 atomic layer and overall components deposited on the rGO (rGO-ED-CeO2-WCuCo) is prepared through a one-pot sonication technique. The presence of SMAO is identified by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging. The electrocatalytic performance of final rGO-ED-CeO2-WCuCo-30 nanocomposite for the OER in 1 M KOH electrolyte is evidenced by providing low overpotential of 283 mV at 10 mA cm-2. The Tafel slope for OER using rGO-ED-CeO2-WCuCo-30 electrocatalysts is 57.03 mV dec-1. The electrocatalytic activity of rGO-ED-CeO2-WCuCo-30 nanocomposites for OER was noticeably increased when compared to bare CeO2 nanorods (401 mV), rGO-ED-CeO2-WCo-30 (345 mV), rGO-ED-CeO2-WCu-30 (340 mV) and rGO-ED-CeO2-WCuCo-20 (321 mV) samples.

Heterostructure Interface Engineering in CoP/FeP/CeOx with a Tailored d-Band Center for Promising Overall Water Splitting Electrocatalysis

Accomplishing a green hydrogen economy in reality through water spitting ultimately relies upon earth-abundant efficient electrocatalysts that can simultaneously accelerate the oxygen and hydrogen evolution reactions (OER and HER). The perspective of electronic structure modulation via interface engineering is of great significance to optimize electrocatalytic output but remains a tremendous challenge. Herein, an efficient tactic has been explored to prepare nanosheet-assembly tumbleweed-like CoFeCe-containing precursors with time-/energy-saving and easy-operating features. Subsequently, the final metal phosphide materials containing multiple interfaces, denoted CoP/FeP/CeO_x, have been synthesized via the phosphorization process. Through the optimization of the Co/Fe ratio and the content of the rare-earth Ce element, the electrocatalytic activity has been regulated. As a result, bifunctional Co3Fe/Ce0.025 reaches the top of the volcano for both OER and HER simultaneously, with the smallest overpotentials of 285 mV (OER) and 178 mV (HER) at 10 mA cm^-2 current density in an alkaline environment. Multicomponent heterostructure interface engineering would lead to more exposed active sites, feasible charge transport, and strong interfacial electronic interaction. More importantly, the appropriate Co/Fe ratio and Ce content can synergistically tailor the d-band center with a downshift to enhance the per-site intrinsic activity. This work would provide valuable insights to regulate the electronic structure of superior electrocatalysts toward water splitting by constructing rare-earth compounds containing multiple heterointerfaces.

Atypical performance of CoO-accelerated interface tweaking in hierarchical cobalt phosphide/oxide@P-doped rGO heterostructures for hybrid supercapacitors

Designing two-dimensional (2D) heterostructures based on suitable energy materials is a promising strategy to achieve high-performance supercapacitors with hybridized transition metal and carbonaceous-based electrodes. The influence of each component and its content on the capacitor performance necessitates deeper insights. In this study, a 2D/2D heterostructure made of hierarchical pseudocapacitive cobalt phosphide/oxide and P-doped reduced graphene oxide (PrGO) nanosheets (CoP/CoO@PrGO) was fabricated using porous zeolitic-imidazolate framework precursor. The decoration of 2D leaf-like CoP/CoO hybrid onto PrGO could create a unique interface with a large number of active sites, CoO-driven creation of pseudocapacitive surface PO_x species, and high P content (∼3 at.%) in PrGO, thus promoting the Faradaic reaction, electrical conductivity, and overall charge storage. This framework yields a high specific capacitance of 405 F g^-1 at 5 A g^-1 and excellent cycling stability (over 100 % after 10,000 cycles), superior to those of pristine CoP@PrGO (300 F g^-1 at 5 A g^-1). Furthermore, the fabricated asymmetric supercapacitor delivers reasonable energy density of 4.2 Wh kg^-1 at a power density of 785 W kg^-1 and cycling stability of ∼100 % after 10,000 cycles. Therefore, CoP/CoO@PrGO with its unique interfacial properties can promote the development of heterostructure electrode for high-performance supercapacitors.

Ex Situ Reconstruction-Shaped Ir/CoO/Perovskite Heterojunction for Boosted Water Oxidation Reaction

The oxygen evolution reaction (OER) is the performance-limiting step in the process of water splitting. In situ electrochemical conditioning could induce surface reconstruction of various OER electrocatalysts, forming reactive sites dynamically but at the expense of fast cation leaching. Therefore, achieving simultaneous improvement in catalytic activity and stability remains a significant challenge. Herein, we used a scalable cation deficiency-driven exsolution approach to ex situ reconstruct a homogeneous-doped cobaltate precursor into an Ir/CoO/perovskite heterojunction (SCI-350), which served as an active and stable OER electrode. The SCI-350 catalyst exhibited a low overpotential of 240 mV at 10 mA cm^-2 in 1 M KOH and superior durability in practical electrolysis for over 150 h. The outstanding activity is preliminarily attributed to the exponentially enlarged electrochemical surface area for charge accumulation, increasing from 3.3 to 175.5 mF cm^-2. Moreover, density functional theory calculations combined with advanced spectroscopy and ¹⁸O isotope-labeling experiments evidenced the tripled oxygen exchange kinetics, strengthened metal-oxygen hybridization, and engaged lattice oxygen oxidation for O-O coupling on SCI-350. This work presents a promising and feasible strategy for constructing highly active oxide OER electrocatalysts without sacrificing durability.

RE-doped (RE = La, Ce and Er) Ni2P porous nanostructures as promising electrocatalysts for hydrogen evolution reaction

The construction of an efficient non-noble-metal electrocatalyst towards alkaline hydrogen evolution is challenging but in great demand. The fabrication of a porous nanostructure and heteroatom doping are two productive strategies for developing effective electrocatalysts. In this contribution, we report the preparation of La, Ce and Er-doped Ni₂P porous nanostructures through a facile water bath method and phosphorization strategy. The Er-doped Ni₂P porous nanostructure exhibits superb hydrogen evolution reaction (HER) catalytic performance under alkaline conditions with a low cathodic overpotential of 87 mV (10 mA cm^-2, glassy carbon) and a small Tafel slope of 65.4 mV dec^-1. It also displays excellent electrochemical stability in alkaline electrolytes. First-principles density functional theory (DFT) calculations disclosed the mechanism of the alkaline HER catalysis. For pristine Ni₂P, the P site acts as the optimal active site with the Gibbs free energy of H* absorption (ΔG_H*) of 0.48 eV. After La, Ce and Er are doped, respectively, the P site is still the active center of the three doping systems. Notably, the ΔG_H* value is reduced from 0.48 eV to 0.23 eV (P site in La-doped Ni₂P), 0.20 eV (P site in Ce-doped Ni₂P) and 0.18 eV (P site in Er-doped Ni₂P), suggesting that doping with La, Ce and Er atoms plays a crucial role in decreasing the H* absorption energy on optimal P sites and the optimum active site with a smaller ΔG_H* can expedite the charge transfer rate for H* midbody and H₂ generation. This is particularly noticeable for Er doping, which is in accordance with the experimental result.

Hierarchical Co(OH)2 Dendrite Enriched with Oxygen Vacancies for Promoted Electrocatalytic Oxygen Evolution Reaction

It is critical to develop efficient oxygen evolution reaction (OER) catalysts with high catalytic properties for overall water splitting. Electrocatalysts with enriched vacancies are crucial for enhancing the catalytic activity of OER through defect engineering. We demonstrated the dealloying method in a reducing alkaline solution using the Co₅Al₉₅ alloy foil as a precursor to produce a new oxygen-vacancy-rich cobalt hydroxide (O_V−Co(OH)₂) hierarchical dendrite. The as-synthesised O_V−Co(OH)₂ showed superior electrocatalytic activities toward OER when compared to pristine cobalt hydroxide (p–Co(OH)₂), which had a low onset overpotential of only 242 mV and a small Tafel slope of 64.9 mV dec⁻¹. Additionally, for the high surface area provided by the hierarchical dendrite, both p–Co(OH)₂ and O_V−Co(OH)₂ showed a superior activity as compared to commercial catalysts. Furthermore, they retained good catalytic properties without remarkably decaying at an overpotential of 350 mV for 12 h. The as-made O_V−Co(OH)₂ has prospective applications as an anode electrocatalyst in electrochemical water-splitting technologies with the advantages of superior OER performances, large surface area and ease of preparation.