Mechanistic Insight into the Synergetic Interaction of Ammonia Borane and Water on ZIF-67-Derived Co@Porous Carbon for Controlled Generation of Dihydrogen

Silica Confinement for Stable and Magnetic Co-Cu Alloy Nanoparticles in Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution

Ammonia borane (AB) with 19.6 wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9 molH2 ⋅ molmetal ⋅ min-1 for AB hydrolysis at 298 K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30 cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.

MXene Hollow Spheres Supported by a C-Co Exoskeleton Grow MWCNTs for Efficient Microwave Absorption

High-performance microwave absorption (MA) materials must be studied immediately since electromagnetic pollution has become a problem that cannot be disregarded. A straightforward composite material, comprising hollow MXene spheres loaded with C-Co frameworks, was prepared to develop multiwalled carbon nanotubes (MWCNTs). A high impedance and suitable morphology were guaranteed by the C-Co exoskeleton, the attenuation ability was provided by the MWCNTs endoskeleton, and the material performance was greatly enhanced by the layered core-shell structure. When the thickness was only 2.04 mm, the effective absorption bandwidth was 5.67 GHz, and the minimum reflection loss (RLmin) was - 70.70 dB. At a thickness of 1.861 mm, the sample calcined at 700 °C had a RLmin of - 63.25 dB. All samples performed well with a reduced filler ratio of 15 wt%. This paper provides a method for making lightweight core-shell composite MA materials with magnetoelectric synergy.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Water State-Driven Catalytic Hydrolysis of Ammonia Borane on Cu3P-Carbon Dot-Cu Composite

Hydrogen production from ammonia borane (AB) is usually governed by water activation, which is not only energy-intensive but also requires expensive and complicated catalysts. We here propose an integrated photocatalytic-photothermal system that dramatically improves water activation and lowers the transport resistance of H₂ by means of intermediate state water evaporation. This system is constructed by covering nanocomposites (Cu₃P-carbon dots-Cu) upon vertically aligned acetate fibers (VAAFs). As a result of superior hydration effect of VAAFs and local photothermal heating for rapid water evaporation, its hydrogen production efficiency from AB hydrolysis reaches over 10 times the particulate suspension system under solar irradiation. Mechanism analysis reveals that the rapid vaporization of intermediate water promotes the cleavages of O-H bonds in bound water and the adsorption reaction of AB and water molecules at active sites. Therefore, this work provides a novel approach to optimize catalytic reaction in thermodynamics and kinetics for the hydrolysis of AB.

Synergistic interface between metal Cu nanoparticles and CoO for highly efficient hydrogen production from ammonia borane

The development of efficient non-noble metal catalysts for the dehydrogenation of hydrogen (H₂) storage materials is highly desirable to enable the global production and storage of H₂ energy. In this study, Cu _x -(CoO)_1-x /TiO₂ catalysts with a Cu-CoO interface supported on TiO₂ are shown to exhibit high catalytic efficiency for ammonia borane (NH₃BH₃) hydrolysis to generate H₂. The best catalytic activity was observed for a catalyst with a Cu : Co molar ratio of 1 : 1. The highest dehydrogenation turnover frequency (TOF) of 104.0 mol_H2 mol_metal ^-1 min^-1 was observed in 0.2 M NaOH at room temperature, surpassing most of the TOFs reported for non-noble catalysts for NH₃BH₃ hydrolysis. Detailed characterisation of the catalysts revealed electronic interactions at the Cu-CoO heterostructured interface of the catalysts. This interface provides bifunctional synergetic sites for H₂ generation, where activation and adsorption of NH₃BH₃ and H₂O are accelerated on the surface of Cu and CoO, respectively. This study details an effective method of rationally designing non-noble metal catalysts for H₂ generation via a metal and transition-metal oxide interface.

Substrate-Gated Transformation of a Pre-Catalyst into an Iron-Hydride Intermediate [(NO)2(CO)Fe(μ-H)Fe(CO)(NO)2]- for Catalytic Dehydrogenation of Dimethylamine Borane

Continued efforts are made on the development of earth-abundant metal catalysts for dehydrogenation/hydrolysis of amine boranes. In this study, complex [K-18-crown-6-ether][(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂] (3-K-crown, ^MePyr = 3-methylpyrazolate) was explored as a pre-catalyst for the dehydrogenation of dimethylamine borane (DMAB). Upon evolution of H_2(g) from DMAB triggered by 3-K-crown, parallel conversion of 3-K-crown into [(NO)₂Fe(N,N'-^MePyrBH₂NMe₂)]^- (5) and an iron-hydride intermediate [(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂]^- (A) was evidenced by X-ray diffraction/nuclear magnetic resonance/infrared/nuclear resonance vibrational spectroscopy experiments and supported by density functional theory calculations. Subsequent transformation of A into complex [(NO)₂Fe(μ-CO)₂Fe(NO)₂]^- (6) is synchronized with the deactivated generation of H_2(g). Through reaction of complex [Na-18-crown-6-ether][(NO)₂Fe(η²-BH₄)] (4-Na-crown) with CO_(g) as an alternative synthetic route, isolated intermediate [Na-18-crown-6-ether][(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂] (A-Na-crown) featuring catalytic reactivity toward dehydrogenation of DMAB supports a substrate-gated transformation of a pre-catalyst [(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂]^- (3) into the iron-hydride species A as an intermediate during the generation of H_2(g).

Paving the Way to the Fuel of the Future-Nanostructured Complex Hydrides

Hydrides have emerged as strong candidates for energy storage applications and their study has attracted wide interest in both the academic and industry sectors. With clear advantages due to the solid-state storage of hydrogen, hydrides and in particular complex hydrides have the ability to tackle environmental pollution by offering the alternative of a clean energy source: hydrogen. However, several drawbacks have detracted this material from going mainstream, and some of these shortcomings have been addressed by nanostructuring/nanoconfinement strategies. With the enhancement of thermodynamic and/or kinetic behavior, nanosized complex hydrides (borohydrides and alanates) have recently conquered new estate in the hydrogen storage field. The current review aims to present the most recent results, many of which illustrate the feasibility of using complex hydrides for the generation of molecular hydrogen in conditions suitable for vehicular and stationary applications. Nanostructuring strategies, either in the pristine or nanoconfined state, coupled with a proper catalyst and the choice of host material can potentially yield a robust nanocomposite to reliably produce H₂ in a reversible manner. The key element to tackle for current and future research efforts remains the reproducible means to store H₂, which will build up towards a viable hydrogen economy goal. The most recent trends and future prospects will be presented herein.

Recent Development in Nanoconfined Hydrides for Energy Storage

Hydrogen is the ultimate vector for a carbon-free, sustainable green-energy. While being the most promising candidate to serve this purpose, hydrogen inherits a series of characteristics making it particularly difficult to handle, store, transport and use in a safe manner. The researchers’ attention has thus shifted to storing hydrogen in its more manageable forms: the light metal hydrides and related derivatives (ammonia-borane, tetrahydridoborates/borohydrides, tetrahydridoaluminates/alanates or reactive hydride composites). Even then, the thermodynamic and kinetic behavior faces either too high energy barriers or sluggish kinetics (or both), and an efficient tool to overcome these issues is through nanoconfinement. Nanoconfined energy storage materials are the current state-of-the-art approach regarding hydrogen storage field, and the current review aims to summarize the most recent progress in this intriguing field. The latest reviews concerning H₂ production and storage are discussed, and the shift from bulk to nanomaterials is described in the context of physical and chemical aspects of nanoconfinement effects in the obtained nanocomposites. The types of hosts used for hydrogen materials are divided in classes of substances, the mean of hydride inclusion in said hosts and the classes of hydrogen storage materials are presented with their most recent trends and future prospects.

Modulating the Acidic Properties of Mesoporous Mox-Ni0.8Cu0.2O Nanowires for Enhanced Catalytic Performance toward the Methanolysis of Ammonia Borane for Hydrogen Production

Rational construction of inexpensive, highly efficient, and stable catalysts for ammonia borane (AB) methanolysis is in high demand but still remains a great challenge. In this work, we have successfully fabricated uniform Mo_x-Ni_0.8Cu_0.2O nanowires using a simple hydrothermal method followed by a post-calcination treatment and flexibly modulated the acidity of their surface by changing the amount of Mo introduced into Ni_0.8Cu_0.2O. The Mo_0.1-Ni_0.8Cu_0.2O catalyst displayed strong catalytic activity toward AB methanolysis with an ultrahigh turnover frequency of 46.9 mol_H2 mol_cat.^-1 min^-1, which is even higher than some noble metal catalysts. In this work, an equation regarding the relationship between the quantity of moderated acid sites of catalysts and its corresponding activity toward AB methanolysis was first determined. A plausible mechanism for AB methanolysis catalyzed by Mo_x-Ni_0.8Cu_0.2O was proposed, and the benefits of the introduction of MoO₃ to Ni_0.8Cu_0.2O for enhancing the catalytic performance were also discussed. These findings can form a basis for the rational construction of inexpensive catalysts with robust performance toward AB methanolysis for hydrogen production.

N-Coordinated Ir single atoms anchored on carbon octahedrons for catalytic oxidation of formaldehyde under ambient conditions

N-Coordinated Ir single atoms using N-doped carbon as a non-oxide support for formaldehyde removal under ambient conditions for the first time.