Fully Biomass-Based Hybrid Hydrogel for Efficient Solar Desalination with Salt Self-Cleaning Property

Encapsulated High-Salt but Corrosion-Resistant Hygroscopic Medium for Long-Term Passive Solar Cell Cooling

Cooling the solar panel with hygroscopic materials offers a potential solution to mitigate its thermal damage and photovoltaic efficiency reduction. However, the practical application of this approach is significantly hindered by the limited water storage capacity and the back electrode corrosion. In this study, it is demonstrated that encapsulating LiCl-loaded carbon felt in a superhydrophobic polytetrafluoroethylene membrane effectively preserves its high absorptivity while preventing the conventional corrosion issue. This approach ensures sustainable and long-term passive cooling of solar cells. The high-salt but corrosion-resistant (HSCR) material has extremely high water adsorption and storage capacities, which is characterized by the ability to absorb more than 5 times its weight of water within 8 h of incubation at 25 °C and 90% relative humidity (RH). Under 1 sun illumination, incorporating HSCR reduces the solar panel temperature by 17.8 °C while increasing the photovoltaic efficiency by 10.7%. More importantly, the salts encapsulated within the membrane remain leak-proof and the cooling performance can be effectively regenerated after multiple cycles. This work provides a promising solution for sustainable and passive solar panel cooling.

Recent Advances of Bio-Based Hydrogel Derived Interfacial Evaporator for Sustainable Water and Collaborative Energy Storage Applications

Solar interfacial evaporation strategy (SIES) has shown great potential to deal with water scarcity and energy crisis. Biobased hydrogel derived interfacial evaporator can realize efficient evaporation due to the unique structure- properties relationship. As such, increasing studies have focused on water treatment or even potential accompanying advanced energy storage applications with respect of efficiency and mechanism of bio-based hydrogel derived interfacial evaporation from microscale to molecular scale. In this review, the interrelationship between efficient interfacial evaporator and bio-based hydrogel is first presented. Then, special attention is paid on the inherent molecular characteristics of the biopolymer related to the up-to-date studies of promising biopolymers derived interfacial evaporator with the objective to showcase the unique superiority of biopolymer. In addition, the applications of the bio-based hydrogels are highlighted concerning the aspects including water desalination, water decontamination atmospheric water harvesting, energy storage and conversion. Finally, the challenges and future perspectives are given to unveil the bottleneck of the biobased hydrogel derived SIES in sustainable water and other energy storage applications.

Interactions of Melanin with Electromagnetic Radiation: From Fundamentals to Applications

Melanin, especially integumentary melanin, interacts in numerous ways with electromagnetic radiation, leading to a set of critical functions, including radiation protection, UV-protection, pigmentary and structural color productions, and thermoregulation. By harnessing these functions, melanin and melanin-like materials can be widely applied to diverse applications with extraordinary performance. Here we provide a unified overview of the melanin family (all melanin and melanin-like materials) and their interactions with the complete electromagnetic radiation spectrum (X-ray, Gamma-ray, UV, visible, near-infrared), which until now has been absent from the literature and is needed to establish a solid fundamental base to facilitate their future investigation and development. We begin by discussing the chemistries and morphologies of both natural and artificial melanin, then the fundamentals of melanin-radiation interactions, and finally the exciting new developments in high-performance melanin-based functional materials that exploit these interactions. This Review provides both a comprehensive overview and a discussion of future perspectives for each subfield of melanin that will help direct the future development of melanin from both fundamental and applied perspectives.

Hydrogel-Based Interfacial Solar-Driven Evaporation: Essentials and Trails

Hydrogel-based interfacial solar-driven evaporation (ISDE) gives full play to the highly adjustable physical and chemical properties of hydrogel, which endows ISDE systems with excellent evaporation performance, anti-pollution properties, and mechanical behavior, making it more promising for applications in seawater desalination and wastewater treatment. This review systematically introduces the latest advances in hydrogel-based ISDE systems from three aspects: the required properties, the preparation methods, and the role played in application scenarios of hydrogels used in ISDE. Additionally, we also discuss the remaining challenges and potential opportunities in hydrogel-based ISDE systems. By summarizing the latest research progress, we hope that researchers in related fields have some insight into the unique advantages of hydrogels in the ISDE field and contribute our efforts so that ISDE technology reaches the finishing line of practical application on the hydrogel track.

Mussel-inspired chitin nanofiber adherable hydrogel sensor with interpenetrating network and great fatigue resistance for motion and acoustics monitoring

A method for grafting dopamine onto TEMPO-oxidized chitin nanofibers (TOChN) was developed, achieving a surface grafting rate of 54 % through the EDC/NHS reaction. This process resulted in the formation of dopamine-grafted TOChN (TOChN-DA). Subsequently, an adherent, highly sensitive, fatigue-resistant conductive PAM/TOChN-PDA/Fe3+ (PTPF) hydrogel was successfully synthesized based on the composition of polyacrylamide (PAM) and TOChN-DA, which exhibited good cell compatibility, a tensile strength of 89.42 kPa, and a high adhesion strength of 62.56 kPa with 1.2 wt% TOChN-DA. Notably, the PTPF hydrogel showed stable adherence to various surfaces, such as rubber, copper, and human skin. Specifically, the addition of FeCl3 contributed to a multifunctional design in the PTPF interpenetrating network (IPN) hydrogel, endowing it with conductivity, cohesion, and antioxidant properties, which facilitated sensitive motion and acoustics monitoring. Moreover, the PTPF hydrogel demonstrated exceptional fatigue resistance and sensing stability, maintaining performance at 50 % strain over 1000 cycles. These attributes render the PTPF hydrogel a promising candidate for advanced biosensors in medical and athletic applications.

Making Nanofiber Membrane Stand on End to Construct Vertically Interfacial Evaporators for Efficient Solar Evaporation, Omnidirectional Solar Absorption, and Ultrahigh-Salinity Brine Desalination

Solar-driven interfacial desalination is widely considered to be a promising technology to address the global water crisis. This study proposes a novel electrospun nanofiber-based all-in-one vertically interfacial solar evaporator endowed with a high steam generation rate, steady omnidirectional evaporation, and enduring ultrahigh-salinity brine desalination. In particular, the electrospun nanofiber is collected into the tubular structure, followed by spraying with a dense crosslinked poly(vinyl alcohol) film, which renders them sufficiently strong for the preparation of a vertically array evaporator. The integrated evaporator made an individual capillary as a unit to form multiple thermal localization interfaces and steam dissipation channels, realizing zone heating of water. Thus a high steam generation rate exceeding 4.0 kg m-2 h-1 in pure water is demonstrated even under omnidirectional sunlight, and outperforms existing evaporators. Moreover, salt ions in the photothermal layer can be effectively transported to the water in capillaries and subsequently exchanged with the bulk water due to the strong action of capillary force, which ensures an ultrahigh desalination rate (≈12.5 kg m-2 h-1 under 3 sun) in 25 wt% concentration brine over 300 min. As such, this work provides a meaningful roadmap for the development of state-of-the-art solar-driven interfacial desalination.

Preparation of high strength, self-healing conductive hydrogel based on polysaccharide and its application in sensor

The development of cost-effective, eco-friendly conductive hydrogels with excellent mechanical properties, self-healing capabilities, and non-toxicity holds immense significance in the realm of biosensors. The biosensors demonstrate promising applications in the fields of biomedical engineering and human motion detection. A unique double-network hydrogel was prepared through physical-chemical crosslinking using chitosan (CS), polyacrylic acid (AA), and sodium alginate (SA) as raw materials. The prepared double-network hydrogels exhibited exceptional mechanical properties, as well as self-healing and conductive capabilities. Polyacrylic acid as the first layer network, while chitosan and sodium alginate were incorporated to establish the second layer network through electrostatic interactions, thereby imparting self-healing and self-recovery properties. The hydrogel was subsequently immersed in the salt solution to induce network winding. The mechanical robustness of the hydrogel was significantly enhanced through synergistic coordination of covalent and non-covalent interactions. When the concentration of sodium alginate was 20 g/L, the double-network hydrogel exhibits enhanced mechanical properties, with a tensile fracture stress of up to 1.31 MPa and a strength of 4.17 MPa under 80% compressive deformation. Furthermore, the recovery rate of this double-network hydrogel reached an impressive 89.63% within a span of 30 min. After 24 h without any external forces, the self-healing rate reached 26.11%, demonstrating remarkable capabilities in terms of self-recovery and self-healing. Furthermore, this hydrogel exhibited consistent conductivity properties and was capable of detecting human finger movements. Hence, this study presents a novel approach for designing and synthesizing environmentally friendly conductive hydrogels for biosensors.

Reusable Floating Spherical Hydrogel Evaporator for Solar Desalination with Salt Mitigation and Contaminant Elimination

The generation of clean and drinkable fresh water from seawater and contaminated water holds great potential to mitigate water scarcity. Herein, a floating spherical hydrogel evaporator (SHE) is designed to achieve sunlight-driven desalination, self-salt cleaning, and removal of environmental contaminants. The spherical lightweight polystyrene is coated with a porous carbon-embedded sodium alginate/PVA/CMC photothermal hydrogel to generate a spherical hydrogel evaporator (SHE) that floats naturally. The SHE is very sensitive to the weight imbalance (500 mg) and can respond quickly to the accumulation of salt by rotation to the fresh evaporation surface, realizing excellent antisalt fouling performance. Remarkably, with energy localization by porous carbon, the spherical floating evaporator achieved a high evaporation rate of 2.65 kg m-2 h-1 with an evaporation efficiency of 98%. At the same time, SHE is also capable of adsorbing both organic contaminants and heavy metal ions through functional groups of the hydrogel, attaining 99% removal efficiency. Overall, this low-cost spherical floating evaporator may offer solution for eco-friendly and sustainable production of fresh water on a large scale.

Boosting interfacial solar steam generation by three-dimensional bilayer cellulose aerogels

Interfacial solar steam generation (ISSG) provides a sustainable approach of clean water production through desalination and water purification. It is still needed to pursue a fast evaporation rate, high-quality freshwater production, and low-cost evaporators. Herein, a three-dimensional (3D) bilayer aerogel was fabricated using cellulose nanofiber (CNF) as a skeleton filled with polyvinyl alcohol phosphate ester (PVAP), and carbon nanotubes (CNT) as a light absorbing material in the top layer. The CNF/PVAP/CNT aerogel (CPC) had broadband light absorption ability and exhibited an ultrafast water transfer rate. The lower thermal conductivity of CPC effectively confined the convert heat in the top surface and minimized heat loss. Additionally, a large amount of intermediate water caused by water activation decreased the evaporation enthalpy. Under 1 sun irradiation, the CPC-3 (3.0 cm height of CPC) achieved a high evaporation rate of 4.02 kg m-2 h-1 with an energy conversion efficiency of 125.1%. The additional convective flow and environmental energy made CPC achieve an ultrahigh evaporation rate of 11.37 kg m-2 h-1, surpassing 673% of the solar input energy. More importantly, the continuous solar desalination and higher evaporation rate (10.70 kg m-2 h-1) in seawater revealed that CPC was a promising candidate for practical desalination. Outdoor cumulative evaporation was up to 73.2 kg m-2 d-1 in weak sunlight and lower temperature, which would meet the daily drinking water demands of 20 people. The excellent cost-effectiveness of 1.085 L h-1 $-1 presented its potential for a wide range of practical applications, such as solar desalination, wastewater treatment, and metal extractions.

Photothermal Conversion of Hydrogel-Based Biomaterial

Traditional energy from fossil fuels like petroleum and coal is limited and contributes to global environmental pollution and climate change. Developing sustainable and eco-friendly energy is crucial for addressing significant challenges such as climate change, energy dilemma and achieving the long-term development of human society. Biomass hydrogels, which are easily synthesized and modified, have diverse sources and can be designed for different applications. They are being extensively researched for their applications in artificial intelligence, flexible sensing, biomedicine, and food packaging. The article summarizes recent advances in the preparation and applications of biomass-based photothermal conversion hydrogels, discussing the light source, photothermal agents, matrix, and preparation methods in detail. It also explores the use of these hydrogels in seawater desalination, photothermal therapy, antibacterial agents, and light-activated materials, offering new ideas for developing sustainable, efficient, and advanced photothermal conversion biomass hydrogel materials. The article concludes with suggestions for future research, highlighting the challenges and prospects in this field and paving the way for developing of long-lasting, efficient energy materials.

Boosting Water Evaporation by Construction of Photothermal Materials with a Biomimetic Black Soil Aggregate Structure

Solar-driven interfacial evaporation is considered an efficient way to get fresh water from seawater. However, the low evaporation rate, surface salt crystallization, and low energy collection of the photothermal evaporation layer limit its further application in an outdoor freshwater field. And the aggregate structure design of the material itself is often ignored in solar-driven water evaporation. Black soil (BS), with a unique soil aggregate structure, is rich in tubular pores, which can be used for multilevel sunlight utilization and good capillary water transport. Based on the extraordinary photothermal properties and pumping capacity of BS, a reasonable unidirectional salt-collecting device is designed, which can realize long-term collection of mineral salts and continuous evaporation of seawater and generate electric energy in the continuous evaporation. Inspired by the unique aggregate structure, the photothermal material doping of halloysite and nigrosin will simulate the generation of this aggregate structure and retain a good water transport effect while obtaining multistage utilization of sunlight. The solar-driven evaporation rate of a nigrosin-halloysite solar steam generator is 1.75 kg m-2 h-1 under 1 kW m-2 mimic solar radiation; it can achieve stable salt leaching-induced voltage generation of 240 mV. This work demonstrates not only a solar evaporator that can continuously achieve desalination but also the design strategy of BS-like aggregate photothermal materials, which promotes the development of low-cost resource recovery and energy generation for practical outdoor seawater desalination.

Scalable, Green, and Cost-Effective Carbonized Sand for Efficient Solar Desalination

Nowadays, sweet and drinkable water shortage is a global issue which has attracted widespread attention. Desalination of seawater as the greatest source of water on our planet using solar energy as the most abundant and green energy source for producing fresh water can help us address this issue. Interfacial solar desalination is a state-of-the-art, sustainable, green, and energy-efficient method that has been studied lately. One of the key parameters for researching this method with reasonable efficiency is a photothermal material. Herein, carbon-coated sand was synthesized using abundant, green, and low-cost materials (sand and sugar), and its performance as a photothermal material is investigated and reported. In this work, a three-dimensional (3D) system is introduced to develop the performance and efficiency of the system under real sun irradiation and natural circumstances. The salt rejection ability of the system is another important thing we should notice due to the high salinity of seawater that we want to desalinate. The superhydrophilic carbonized sand demonstrated a good evaporation rate of 1.53 kg/m²h and 82% efficiency under 1 sun irradiation and upright salt rejection ability, which exhibited its capability to be used in green solar-driven water vaporization technology for sweet water production. The effects of important parameters, including light intensity, wind speed, and environment temperature, on the evaporation rate using carbonized sand as a solar collector in a solar desalination system were studied in both laboratory and real systems.

Eco-friendly photothermal hydrogel evaporator for efficient solar-driven water purification

The field of solar vapor generation has developed rapidly in recent years, but achieving the goals of a high evaporation rate, eco-friendliness and rapid preparation with low-cost raw materials is still a challenge. In this work, a type of photothermal hydrogel evaporator was prepared by blending eco-friendly poly(vinyl alcohol), agarose, Fe³⁺ and tannic acid (TA) together, in which the tannic acid-ferric ion (TA*Fe³⁺) complexes served as photothermal materials and effective gelators. The results indicate that the TA*Fe³⁺ complex exhibits excellent gelatinization ability and light-absorption performance, which leads to a compressive stress of 0.98 MPa at 80% strain and up to 85% light absorption ratio in the photothermal hydrogel. For interfacial evaporation, a high rate of 1.897 ± 0.11 kg·m^-2·h^-1 corresponding to an energy efficiency of 89.7 ± 2.73% under 1 sun irradiation is achieved. Moreover, the hydrogel evaporator exhibits high stability in a 12-hour test and a 20-cycle test without a decline in evaporation performance. The outdoor testing results show that the hydrogel evaporator can achieve an evaporation rate of > 0.70 kg/m² and effectively purify wastewater treatment and seawater desalination.

Progress and opportunities in Gellan gum-based materials: A review of preparation, characterization and emerging applications

Gellan gum, a microbial exopolysaccharide, is biodegradable and has potential to fill several key roles in many fields from food to pharmacy, biomedicine and tissue engineering. In order to improve the physicochemical and biological properties of gellan gum, some researchers take advantage of numerous hydroxyl groups and the free carboxyl present in each repeating unit. As a result, design and development of gellan-based materials have advanced significantly. The goal of this review is to provide a summary of the most recent, high-quality research trends that have used gellan gum as a polymeric component in the design of numerous cutting-edge materials with applications in various fields.

A novel, flexible porous nanofibrous hydrogel interfacial solar evaporator for highly efficient seawater and wastewater purification

Solar desalination is recognized as one of the eco-friendly and sustainable ways to alleviate the global freshwater crisis but still requires further research, especially in developing high-performance evaporators. Herein, we prepared an efficient carbon nanotubes (CNTs)@polyvinyl alcohol (PVA) nanofibrous hydrogel evaporator by electrospinning and subsequently chemical cross-linking treatment. Due to CNTs with good light absorption capacity, the evaporator exhibited an excellent light absorption capacity (>90%) throughout the full spectrum range (250-2500 nm). Meanwhile, the interconnected pores from electrospinning, as well as the intermediate water in the hydrogel, ensured the prepared evaporator with a favorable evaporation rate of up to 2.16 kg m^-2 h^-1 and photothermal conversion efficiency of ∼88.13% under one solar light intensity. For long-term seawater desalination, the CNTs@PVA nanofibrous hydrogel evaporator also presented superior salt resistance, durability and good self-cleaning properties. Besides, various non-volatile pollutants can be completely removed by the prepared evaporator during the wastewater purification. As a result, this work is considered to provide a new direction for developing high-performance evaporators to provide freshwater through seawater desalination and wastewater purification.

Bio-Derived Photothermal Materials and Evaporators for Sustainable Solar Energy-Driven Water Process

Interfacial solar steam generation (ISSG) is considered as an excellent seawater desalination technology because of its electricity-independent nature, low cost, and portability. However, improving the water evaporation efficiency, simplifying the fabrication process, and reducing the overall cost of the evaporator are still challenging. Here, an efficient and sustainable solar water evaporator is fabricated with carbonized ginkgo biloba leaves as the structural basis of photothermal materials. The combination of the abundant capillary channels in ginkgo leaves paired with polyacrylamide (PAM) hydrogel accelerates water transportation and solar-driven evaporation. The fabricated evaporator shows excellent photothermal conversion capability and evaporates water at 2.39 kg m^-2 h^-1 under 1 sun irradiation. In addition, the device exhibits remarkable stability in simulated seawater and can effectively realize seawater desalination or sewage treatment. As a result, the system is promising for future highly efficient solar evaporation due to its environmental protection and low cost.

Zero Energy Heating of Solvent with Network-Structured Solar-Thermal Material: Eco-Friendly Palladium Catalysis of the Suzuki Reaction

Solar-thermal materials absorb sunlight and convert it into heat, which is released into the surrounding medium. Utilization of solar energy for solvent heating can be a potential method of eco-friendly organic reactions. However, to date, significant heating of the entire volume of a solvent by 1 sun illumination has not been reported. In the present work, a network structure of solar-thermal materials has been proposed for zero energy heating of a solvent under 1 sun illumination. A network-structured solar-thermal material with an additional catalytic function was fabricated by sputtering palladium into a melamine sponge. The nanocrystalline palladium-decorated melamine sponge (Pd-sponge) has excellent sunlight absorption properties in the entire wavelength range that enable efficient solar-thermal conversion. The Pd-sponge can reduce heat loss to the surroundings by effectively blocking thermal radiation from the heated solvent. The temperature of the reaction solution with the ethanol-water mixture filled in the Pd-sponge increased from 23 to 59 °C under 1 sun illumination. The elevated temperature of the reaction solutions by solar-thermal conversion successfully accelerated the heterogeneous Pd-catalyzed Suzuki coupling reactions with high conversions. Easy and low-energy-consuming multicycle use of the solar-thermal and catalytic properties of the Pd-sponge has also been demonstrated.

Sustainable Self-Cleaning Evaporators for Highly Efficient Solar Desalination Using a Highly Elastic Sponge-like Hydrogel

Interfacial evaporation using light-absorbing hydrogels offers efficient solar evaporation performance under natural sunlight, ensuring an affordable clean water supply. However, achieving light-absorbing hydrogels with durable and efficient utilization is still a challenge due to inevitable salt accumulation, a difficult-to-control surface morphology, and poor mechanical properties on the surfaces of hydrogel-based evaporators. In this work, a photothermal sponge-like hydrogel with a 3D interconnected porous structure was constructed using low-cost activated carbon as a photothermal material, as well as a double-network polymer chain as the basic skeleton using a simple foaming polymerization strategy. The sponge-like hydrogel evaporator showed tailored surface topography, adequate water transport, excellent elasticity and toughness, good salt rejection, and thermal localization properties. Under the irradiation of simulated sunlight (1.0 kW/m²), a high evaporation rate of 2.33 kg·m^-2·h^-1 was achieved. Furthermore, efficient salt self-cleaning behavior was achieved due to the fast ion diffusion within the 3D interconnected porous structures. Even in highly concentrated brine of 15 wt %, continuous and efficient water evaporation was still achieved. The excellent evaporation and salt rejection properties of this photothermal sponge-like hydrogel indicated its promising long-term sustainable utilization in seawater desalination.

Dual-Layer Multichannel Hydrogel Evaporator with High Salt Resistance and a Hemispherical Structure toward Water Desalination and Purification

Interfacial solar steam generation technology has been considered as one of the most promising methods for seawater desalination. However, in practical applications, salt precipitation on the evaporation surface reduces the evaporation rate and impairs long-term stability. Herein, a dual-layer hydrogel-based evaporator that contains a microchannel-structured water-supplying layer and a nanoporous light-absorbing layer was synthesized via sol-gel transition and "hot-ice" template methods. Contributed by the designed structure-induced accelerated salt ion exchange, the hemispherical dual-layer hydrogel evaporator showed excellent salt formation resistance property, as well as a high evaporation rate reaching 2.03 kg m^-2 h^-1 even under high brine concentration conditions. Furthermore, the hydrogel-based evaporator also demonstrated excellent ion rejection, high/low pH tolerance, and excellent purification properties toward heavy metals and organic dyes. It is believed that this type of dual-layer multichannel evaporator is promising to be used in seawater desalination, water pollution treatment, and other environmental remediation-related applications.

Diatom-Inspired TiO2-PANi-Decorated Bilayer Photothermal Foam for Solar-Driven Clean Water Generation

Interfacial solar-driven evaporation provides one of the most promising green and sustainable technologies to deal with the knotty water crisis by extracting vapor from a variety of water sources powered by solar energy. Advanced photothermal materials play critical roles in interfacial solar-driven evaporation by photothermal conversion and heat localization. Herein, inspired by the unique hierarchical structure and light-harvesting function of diatoms, we propose a novel photothermal material with a diatom-like hierarchical nanostructure derived from TiO₂-PANi-decorated bilayer melamine foam (TiO₂-PANi@MF) for solar-driven clean water generation. The diatom-like hierarchical nanostructured TiO₂-PANi@MF can realize full-spectrum light absorption and photothermal conversion by enhancing multiple light reflection and light scattering. Thanks to the diatom-like hierarchical nanostructure, TiO₂-PANi@MF not only impressively achieves an evaporation rate of 2.12 kg m^-2 h^-1 under 1 sun irradiation but also shows a high solar steam conversion efficiency up to 88.9%. Notably, the TiO₂-PANi composite also endows TiO₂-PANi@MF with photocatalytic degradation capability. Apart from the excellent steam generation capability, optimized TiO₂-PANi@MF also provides the high photocatalytic efficiency of dye degradation and maintains a high evaporation rate of more than 2 kg m^-2 h^-1. We believe that the proposed photothermal material with a diatom-like hierarchical nanostructure can envision promising practical applications in seawater desalination and sewage purification.