Novel Design Strategy of High Activity Electrocatalysts toward Nitrogen Reduction Reaction via Boron-Transition-Metal Hybrid Double-Atom Catalysts

Polarization-mediated electronic characteristics in Sc2CO2-based 2D metal-ferroelectric heterostructures

The preparation of two-dimensional (2D) monolayer Sc2CO2ferroelectric semiconductor materials provides a promising material candidate for the development of high-performance electronic devices. However, the Schottky barrier present at the electrode/Sc2CO2interface significantly hinders the efficiency of charge injection. In this work, we propose the utilization of 2D metallic materials as electrodes to form van der Waals (vdW) contacts with ferroelectric Sc2CO2monolayers, aiming to achieve reduced Fermi-level pinning at the interface. By leveraging the ferroelectric polarization reversal in Sc2CO2, we demonstrate a controllable transition from Schottky to Ohmic contact, which is critical for optimizing charge injection efficiency. Additionally, we systematically investigate the polarization-mediated electronic properties of 2D metal/Sc2CO2interfaces through first-principles calculations. The findings indicate that a transition from Schottky to Ohmic contact can be induced within these heterostructures by manipulating the polarization reversal of Sc2CO2ferroelectric layers. Notably, the NbS2/Sc2CO2heterojunction, particularly in the upward polarization state, exhibits the highest carrier tunneling probability among the investigated heterojunctions, making it an optimal electrode for Sc2CO2. These findings are essential for regulating Schottky barriers in 2D metal/ferroelectric semiconductor heterostructures and provide theoretical guidance for designing high-performance field-effect transistors based on 2D metal/Sc2CO2vdW heterostructures.

Improving Nitric Oxide Reduction Reaction Activity of TMN4-C Model Catalysts by Axial Atom Coordination

In comparison with the conventional four-nitrogen coordinated transition metal (TMN4), we clarify that the electrochemical nitric oxide reduction reaction (NORR) activity can be significantly improved by axially coordinating nonmetal atoms (O, F, Cl) over the metal sites. In light of an electron-withdrawing effect, the axial fifth ligand disrupts the electron distribution symmetry and regulates the local electronic structure of the metal active center. It subsequently moderates the TM-NO interaction and thus enhances the activity. In particular, MnN4O-C, FeN4O-C, CoN4O-C, and CoN4F-C are identified as promising NORR catalysts with ultralow limiting potential (UL) of -0.07, -0.07, -0.07, and -0.05 V, respectively. In addition, the axial atom can also passivate the competing hydrogen evolution reaction (HER), increasing the selectivity toward NH3 formation. It therefore can be concluded that the present work affirms a novel strategy for the rational design of advanced electrocatalysts, highlighting the significance of optimal metal-ligand match and the coordination microenvironment tuning of the active centers.

High catalytic activity and abundant active sites in M2C12 monolayer for nitrogen reduction reaction

Developing highly efficient single-atom catalysts (SACs) for the nitrogen reduction reaction (NRR) to ammonia production has garnered significant attention in the scientific community. However, achieving high activity and selectivity remains challenging due to the lack of innate activity in most existing catalysts or insufficient active site density. This study delves into the potential of M2C12 materials (M = Cr, Ir, Mn, Mo, Os, Re, Rh, Ru, W, Fe, Cu, and Ti) with high transition metal coverage as SACs for NRR using first-principles calculations. Among these materials, Os2C12 exhibited superior catalytic activity for NRR, with a low overpotential of 0.39 V and an Os coverage of up to 72.53 wt%. To further boost its catalytic activity, a nonmetal (NM) atom doping (NM = B, N, O, and S) and C vacancy modification were explored in Os2C12. It is found that the introduction of O enables exceptional catalytic activity, selectivity, and stability, with an even lower overpotential of 0.07 V. Incorporating the O atom disrupted the charge balance of its coordinating C atoms, effectively increasing the positive charge density of the Os-d-orbit-related electronic structure. This promoted strong d-π* coupling between Os and N2H, enhancing N2H adsorption and facilitating NRR processes. This comprehensive study provides valuable insights into NRR catalyst design for sustainable ammonia production and offers a reference for exploring alternative materials in other catalytic reactions.

Single and dual-atom catalysts towards electrosynthesis of ammonia and urea: a review

Ammonia and urea represent two important chemicals that have contributed to the rapid development of humanity. However, their industrial production requires harsh conditions, consuming excessive energy and resulting in significant greenhouse gas emission. Therefore, there is growing interest in the electrocatalytic synthesis of ammonia and urea as it can be carried out under ambient conditions. Recently, atomic catalysts (ACs) have gained increased attention for their superior catalytic properties, being able to outperform their micro and nano counterparts. This review examines the advantages and disadvantages of ACs and summarises the advancement of ACs in the electrocatalytic synthesis of ammonia and urea. The focus is on two types of AC - single-atom catalysts (SACs) and diatom catalysts (DACs). SACs offer various advantages, including the 100% atom utilization that allows for low material mass loading, suppression of competitive reactions such as hydrogen evolution reaction (HER), and alternative reaction pathways allowing for efficient synthesis of ammonia and urea. DACs inherit these advantages, possessing further benefits of synergistic effects between the two catalytic centers at close proximity, particularly matching the NN bond for N2 reduction and boosting C-N coupling for urea synthesis. DACs also possess the ability to break the linear scaling relation of adsorption energy of reactants and intermediates, allowing for tuning of intermediate adsorption energies. Finally, possible future research directions using ACs are proposed.

Tuning nitrogen adsorption and activation performances of Three-Atom transition metal clusters by modulating external electric fields

Three-atom transition metal clusters (TATMCs) with remarkable catalytic activities, especially Nb3, Zr3, and Y3, are proven to be suitable candidates for efficient ammonia production. The pursuit of effective strategies to further promote the ammonia synthesis performance of TATMCs is necessary. In this study, we systematically investigate the effect of external electric fields on tuning the N2 adsorption and NN* activation performances of Nb3, Zr3, and Y3. Our findings demonstrate that the medium and low positive fields promote the N2 adsorption performance of Nb3, while both positive and negative fields enhance nitrogen adsorption on Zr3. Additionally, electric fields may impede N2 fixation on Y3, yet the N2 adsorption performance of Y3 remains considerable. Negative electric fields enhance the NN* activation performance of Nb3 and Y3. But only high negative fields weaken the NN bond on Zr3, which is attributed to the promotion of the charge accumulation around two N atoms. Notably, Nb3 and Zr3 are identified as two TATMCs with the potential for simultaneous optimization of their EN and ICOHP values. This work sheds light on the field effects on the N2 adsorption and NN* activation performances of TATMCs and guides the design of catalysts for achieving more sustainable ammonia synthesis.

Unveiling the potential of a BCN-biphenylene monolayer as a high-performance anode material for alkali metal ion batteries: a first-principles study

Inspired by a freshly synthesized two-dimensional biphenylene carbon network, which features a captivating combination of hexagonal, square, and octagonal rings, we explored a similar biphenylene network composed of boron, carbon, and nitrogen (bpn-BCN) using first-principles calculations. There are six possible phases of borocarbonitrides, which are isoelectronic to biphenylene carbon networks with a stoichiometric ratio of 1 : 1 : 1 for boron (B), carbon (C), and nitrogen (N) atoms. All possible isoelectronic structures of the BCN combination of biphenylene networks are found to be stable, according to first-principles calculations. However, the geometry has a relatively large number of robust C-C and B-N bonds and strong partially ionic-covalent B-C and C-N bonds inside these bpn-BCN monolayers are effectively more stable. Furthermore, we employed first-principles calculations to investigate the electrochemical properties of the most stable geometry of BCN biphenylene as a potential anode material for alkali metal (AM) ion batteries. A global search has been made to find the most favourable alkali metal ion adsorption sites. The biphenylene monolayer has octagonal, square, and hexagonal motifs with different adsorption strengths. Furthermore, the partially ionic bond of B-N (due to the electronegativity difference) also supports the alkali metal ions for adsorption. The electronic properties of the stable phase of bpn-BCN reveal its narrow bandgap semiconductor nature. The ion diffusion calculations show a low activation barrier for Li, Na, and K of 0.65 eV, 0.26 eV, and 0.23 eV, respectively, indicating a fast charge/discharge rate. Furthermore, the theoretical capacities of the BCN biphenylene monolayer for Li (1057.33 mA h g-1), Na (647.27 mA h g-1), and K (465.98 mA h g-1) are found to be greater than those of commercial graphite. The average open-circuit voltage for AM decreases with increasing metal ion concentrations. It falls within a reasonable range of 0.34-1.89 V. Our results show that the BCN biphenylene monolayer could be a promising anode material in alkali metal ion rechargeable batteries.

Exploring the Structural Stability of 1T-PdO2 and the Interface Properties of the 1T-PdO2/Graphene Heterojunction

Motivated by a recent study on the air stability of PdSe2, which also reports the metastability of the PdO2 monolayer [Hoffman A. N.. npj 2D Mater. Appl.2019, 3( (1), ), 50.], in this work, we use density functional theory (DFT) to further explore the thermal, dynamic, and mechanical stability of monolayer PdO2 and study its structural and electronic properties. We further studied its vertical heterojunction composed of 1T-PdO2 and graphene monolayers. We show that both the monolayer and the heterojunction are energetically and dynamically stable with no negative frequencies in the phonon spectrum and belong to the vdW-type. 1T-PdO2 is an indirect-band-gap semiconductor with band-gap values of 0.5 eV (GGA) and 1.54 eV (HSE06). The interface properties of the heterojunction show that the n-type Schottky barrier height (SBH) becomes negative at the vertical interface in the PdO2/graphene contact, forming an Ohmic contact and mainly suggesting the potential of graphene for efficient electrical contact with the PdO2 monolayer. However, at the same time, a negative band bending occurs at the lateral interface based on the current-in-plane model. Moreover, the optical absorption of the PdO2/graphene heterojunction under visible-light irradiation is significantly enhanced compared to the situation in their free-standing monolayers.

Density functional theory (DFT) studies in HDAC-based chemotherapeutics: Current findings, case studies and future perspectives

Density Functional Theory (DFT) is a quantum chemical computational method used to predict and analyze the electronic properties of atoms, molecules, and solids based on the density of electrons rather than wavefunctions. It provides insights into the structure, bonding, and behavior of different molecules, including those involved in the development of chemotherapeutic agents, such as histone deacetylase inhibitors (HDACis). HDACs are a wide group of metalloenzymes that facilitate the removal of acetyl groups from acetyl-lysine residues situated in the N-terminal tail of histones. Abnormal HDAC recruitment has been linked to several human diseases, especially cancer. Therefore, it has been recognized as a prospective target for accelerating the development of anticancer therapies. Researchers have studied HDACs and its inhibitors extensively using a combination of experimental methods and diverse in-silico approaches such as machine learning and quantitative structure-activity relationship (QSAR) methods, molecular docking, molecular dynamics, pharmacophore mapping, and more. In this context, DFT studies can make significant contribution by shedding light on the molecular properties, interactions, reaction pathways, transition states, reactivity and mechanisms involved in the development of HDACis. This review attempted to elucidate the scope in which DFT methodologies may be used to enhance our comprehension of the molecular aspects of HDAC inhibitors, aiding in the rational design and optimization of these compounds for therapeutic applications in cancer and other ailments. The insights gained can guide experimental efforts toward developing more potent and selective HDAC inhibitors.

Interfacial Engineering Boosting the Activity and Stability of MIL-53(Fe) toward Electrocatalytic Nitrogen Reduction

The electrochemical nitrogen reduction reaction (eNRR) has emerged as a promising strategy for green ammonia synthesis. However, it suffers unsatisfactory reaction performance owing to the low aqueous solubility of N2 in aqueous solution, the high dissociation energy of N≡N, and the unavoidable competing hydrogen evolution reaction (HER). Herein, a MIL-53(Fe)@TiO2 catalyst is designed and synthesized for highly efficient eNRR. Relative to simple MIL-53(Fe), MIL-53(Fe)@TiO2 achieves a 2-fold enhancement in the Faradaic efficiency (FE) with an improved ammonia yield rate by 76.5% at -0.1 V versus reversible hydrogen electrode (RHE). After four cycles of electrocatalysis, MIL-53(Fe)@TiO2 can maintain a good catalytic activity, while MIL-53(Fe) exhibits a significant decrease in the NH3 yield rate and FE by 79.8 and 82.3%, respectively. Benefiting from the synergetic effect between TiO2 and MIL-53(Fe) in the composites, Fe3+ ions can be greatly stabilized in MIL-53(Fe) during the eNRR process, which greatly hinders the catalyst deactivation caused by the electrochemical reduction of Fe3+ ions. Further, the charge transfer ability in the interface of composites can be improved, and thus, the eNRR activity is significantly boosted. These findings provide a promising insight into the preparation of efficient composite electrocatalysts.

Electronic Perturbation of Isolated Fe Coordination Structure for Enhanced Nitrogen Fixation

Modulation of the local electronic structure of isolated coordination structures plays a critical role in electrocatalysis yet remains a grand challenge. Herein, we have achieved electron perturbation for the isolated iron coordination structure via tuning the iron spin state from a high spin state (FeN4) to a medium state (FeN2B2). The transition of spin polarization facilitates electron penetration into the antibonding π orbitals of nitrogen and effectively activates nitrogen molecules, thereby achieving an ammonia yield of 115 μg h-1 mg-1cat. and a Faradaic efficiency of 24.8%. In situ spectroscopic studies and theoretical calculations indicate that boron coordinate sites, as electron acceptors, can regulate the adsorption energy of NxHy intermediates on the Fe center. FeN2B2 sites favor the NNH* intermediate formation and reduce the energy barrier of rate-determining steps, thus accounting for excellent nitrogen fixation performance. Our strategy provides an effective approach for designing efficient electrocatalysts via precise electronic perturbation.

Bilayer and Trilayer C3N/Blue-Phosphorene Heterostructures as Potential Anode Materials for Potassium-Ion Batteries

Two-dimensional (2D) van der Waals heterostructures outperform conventional anode materials for postlithium-ion batteries in terms of mechanical, thermal, and electrochemical properties. This study systemically investigates the performance of bilayer and trilayer C3N/blue phosphorene (C3N/BlueP) heterostructures as anode materials for potassium-ion batteries (KIBs) using first-principles density functional theory calculations. This study reveals that the adsorption and diffusion of K ions on bilayer and trilayer C3N/BlueP heterostructures are markedly superior to those of their monolayer counterparts. A bilayer heterostructure (C3N/BlueP) effectively reduces the bandgap of the BlueP monolayer (1.98 eV) to 0.02 eV, whereas trilayer heterostructures (bilayer-C3N/BlueP and C3N/bilayer-BlueP) exhibit metallic behavior with no bandgap. Additionally, the theoretical capacity of the bilayer and trilayer heterostructures ranges from 636.7 to 755.5 mA h g-1, considerably higher than the theoretical capacity of other prospective 2D heterostructures for KIBs investigated in the literature. This study also shows that the heterostructures exhibit K-ion diffusion barriers as low as 0.042 eV, ensuring the relatively fast diffusion of K ions.

First-principles investigations of metal-semiconductor MoSH@MoS2 van der Waals heterostructures

Two-dimensional (2D) metal-semiconductor heterostructures play a critical role in the development of modern electronics technology, offering a platform for tailored electronic behavior and enhanced device performance. Herein, we construct a novel 2D metal-semiconductor MoSH@MoS2 heterostructure and investigate its structures, electronic properties and contact characteristics using first-principles investigations. We find that the MoSH@MoS2 heterostructure exhibits a p-type Schottky contact, where the specific Schottky barrier height varies depending on the stacking configurations employed. Furthermore, the MoSH@MoS2 heterostructures possess low tunneling probabilities, indicating a relatively low electron transparency across all the patterns of the MoSH@MoS2 heterostructures. Interestingly, by modulating the electric field, it is possible to modify the Schottky barriers and achieve a transformation from a p-type Schottky contact into an n-type Schottky contact. Our findings pave the way for the development of advanced electronics technology based on metal-semiconductor MoSH@MoS2 heterostructures with enhanced tunability and versatility.

Characterization of Type I/II g-C3N4/MoS2 van der Waals Heterostructures: A New Theoretical Insight

The charge transfer mechanism of the g-C3N4/MoS2 heterojunction is still disputed. Some regard it as a type I pathway, some regard it as a type II pathway, and still some regard it as a Z-scheme pathway. Especially, the results obtained by density functional theory (DFT) calculations are not totally in agreement. Here, we constructed four g-C3N4/MoS2 heterojunctions on the basis of the aperture alignment modes of g-C3N4 and MoS2. Their morphology and photocatalytic activity were investigated via first-principles and excited state dynamics simulations. By systemically comparing the interfacial binding energy and electronic structure (e.g., band structure, electrostatic potential, and band edge positions) of g-C3N4/MoS2 heterojunctions, we found that both type I and type II band alignment structures could be obtained. Moreover, the calculated lifetimes of interlayer photogenerated electrons and holes show that type II g-C3N4/MoS2 tends to favor a general type II pathway rather than a Z-scheme pathway. This study could provide a deep understanding of the photocatalytic mechanism of g-C3N4/MoS2 van der Waals heterostructures, which will be of great use for applications in photocatalysis.

Boron-Modulated Electronic-Configuration Tuning of Cobalt for Enhanced Nitric Oxide Fixation to Ammonia

Electrocatalytic nitric oxide reduction (eNORR) to ammonia (NH3) provides an environmental route to alleviate NO pollution and yield great-value chemicals. The evolution of eNORR has been primarily hindered, however, by the poor reaction kinetics and low solubility of the NO in aqueous electrolytes. Herein, we have rationally designed a cobalt-based composite with a heterostructure as a highly efficient eNORR catalyst. In addition, by integrating boron to modulate the electronic structure, the catalyst CoB/Co@C delivered a significant NH3 yield of 315.4 μmol h-1 cm-2 for eNORR and an outstanding power density of 3.68 mW cm-2 in a Zn-NO battery. The excellent electrochemical performance of CoB/Co@C is attributed to the enrichment of NO by cobalt and boron dual-site adsorption and fast charge-transfer kinetics. It is demonstrated that the boron is pivotal in the enhancement of NO, the suppression of hydrogen evolution, and Co oxidation to boost eNORR performance.

Activating dual atomic electrocatalysts for the nitric oxide reduction reaction through the P/S element

The development of efficient atomic electrocatalysts to resolve the activity and selectivity issues of the nitric oxide reduction reaction (NORR) has increasingly received more attention but is still challenging. The current research on the dual atomic NORR electrocatalyst is exclusively focused on TM atoms. Herein, we propose a novel mechanism of introducing a P/S element, which takes advantage of finite orbitals to active the transition metal (TM) atoms of dual atomic electrocatalysts for NORR. The finite orbitals can hinder the capture of the lone pair electrons of NO but modulate the electronic configurations of the neighboring TM and thus the "donation-backdonation" mechanism can be realized. Through large-scale first-principles calculations, the catalytic performance of a series of P/S-TM biatoms supported by the monolayer CN (P/S-TM@CN) is evaluated. According to a "four-step" screening strategy, P-Cu@CN and S-Ni@CN are successfully screened as promising catalysts with outstanding activity and high selectivity for direct NO-to-NH₃ conversion. Moreover, we identify Δε_d-p as a valid descriptor to evaluate the adsorption of NO on such catalysts, allowing for reducing the number of catalytic candidates. Our work thus provides a new direction for the rational design of dual atomic electrocatalysts.

Understanding Electronic Properties and Tunable Schottky Barriers in a Graphene/Boron Selenide van der Waals Heterostructure

van der Waals heterostructures provide a powerful platform for engineering the electronic properties and for exploring exotic physical phenomena of two-dimensional materials. Here, we construct a graphene/BSe heterostructure and examine its electronic characteristics and the tunability of contact types under electric fields. Our results reveal that the graphene/BSe heterostructure is energetically, mechanically, and thermodynamically stable at room temperature. It forms a p-type Schottky contact and exhibits a high carrier mobility, making it a promising candidate for future Schottky field-effect transistors. Furthermore, applying an electric field not only reduces contact barriers but also induces a transition from a p-type to an n-type Schottky contact and from a Schottky to an ohmic contact, offering further potential for the control and manipulation of the heterostructure's electronic properties. Our findings offer a rational basis for the design of energy-efficient and tunable heterostructure devices based on the graphene/BSe heterostructure.

The regulation of the withstand voltage performance of ZnO/GaN vertical heterostructures using external electric field and vacancy defects

The band gap of the heterostructure determines the withstand voltage. It is very important to regulate the band gap of heterojunctions and to investigate their electrical properties by applying external electric field. Based on density functional theory (DFT), ZnO/GaN vertical heterostructures with two stacking configurations (AB/BA and AB/AB, named H₁ and H₂, respectively) are constructed. The external electric field and vacancy defects of Zn, Ga, O and N atoms (V_Zn, V_Ga, V_O and V_N) are applied to analyze the electrical properties. The band gap can be tuned from 2.07 eV to 0 eV in H₁ and 1.53 eV-0 eV in H₂. As the electric field increases, H₁ has stronger withstand voltage (-0.84-0.56 V/Å) than H₂ (-0.26-0.26 V/Å). In addition, the structures deform obviously with the effect of vacancy defects, but remain stable. The presence of V_Ga and V_N enables H₁ and H₂ to exhibits metal conductivity and V_O change the band types of H₁ and H₂ from direct to indirect. The results of charge density difference (CDD) prove that a zero potential region and a weak electric field occur at the position of V_Zn and V_O, respectively. Likewise, the external electric field is applied to the defective heterostructures. The bandgap also exhibits strong tunability, and the heterostructure with V_O has the largest electric field modulation width. The above results indicate that ZnO/GaN exhibits excellent electrical properties with the influence of V_O, which represents potential applications in electronic devices.

Highly Selective N2 Electroreduction to NH3 Using a Boron-Vacancy-Rich Diatomic NbB Catalyst

The ambient electrochemical N₂ reduction reaction (NRR) is a future approach for the artificial NH₃ synthesis to overcome the problems of high-energy consumption and environmental pollution by Haber-Bosch technology. However, the challenge of N₂ activation on a catalyst surface and the competitive hydrogen evolution reaction make the current NRR unsatisfied. Herein, this work demonstrates that NbB₂ nanoflakes (NFs) exhibit excellent selectivity and durability in NRR, which produces NH₃ with a production rate of 30.5 µg h^-1 mg_cat ^-1 and a super-high Faraday efficiency (FE) of 40.2%. The high-selective NH₃ production is attributed to the large amount of active B vacancies on the surface of NbB₂ NFs. Density functional theory calculations suggest that the multiple atomic adsorption of N₂ on both unsaturated Nb and B atoms results in a significantly stretched N₂ molecule. The weakened NN triple bonds are easier to be broken for a biased NH₃ production. The diatomic catalysis is a future approach for NRR as it shows a special N₂ adsorption mode that can be well engineered.

Interfacial contact barrier and charge carrier transport of MoS2/metal(001) heterostructures

The rapid rise of two-dimensional (2D) materials has aroused increasing interest in the fields of microelectronics and optoelectronics; various types of 2D van der Waals heterostructures (vdWHs), especially those based on MoS₂, have been widely investigated in theory and experiment. However, the interfacial properties of MoS₂ and the uncommon crystal surface of traditional three-dimensional (3D) metals are yet to be explored. In this paper, we studied heterostructures composed of MoS₂ and metal(001) slabs, based on the first-principles calculations, and we uncovered that MoS₂/Au(001) and MoS₂/Ag(001) vdWHs reveal Schottky contacts, and MoS₂/Cu(001) belongs to Ohmic contact and possesses ultrahigh electron tunneling probability at the equilibrium distance. Thus, the MoS₂/Cu(001) heterostructure exhibits the best contact performance. Further investigations demonstrate that external longitudinal strain can modulate interfacial contact to engineer the Schottky-Ohmic contact transition and regulate interfacial charge transport. We believe that it is a general strategy to exploit longitudinal strain to improve interfacial contact performance to design and fabricate a multifunctional MoS₂-based electronic device.

Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia

Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber-Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N₂RR). Herein, we strategically design a cost-effective bimetallic Ru-Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru_0.15Cu_0.85 NS catalyst presents an impressive N₂RR performance with an ammonia yield rate of 26.25 μg h^-1 mg_cat.^-1 (corresponding to 10.5 μg h^-1 cm^-2) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.

A High-Throughput Screening toward Efficient Nitrogen Fixation: Transition Metal Single-Atom Catalysts Anchored on an Emerging π-π Conjugated Graphitic Carbon Nitride (g-C10N3) Substrate with Dirac Dispersion

TM-N_x is becoming a comforting catalytic center for sustainable and green ammonia synthesis under ambient conditions, resulting in increasing interest in single-atom catalysts (SACs) for the electrochemical nitrogen reduction reaction (NRR). However, given the poor activity and unsatisfactory selectivity of existing catalysts, it remains a long-standing challenge to design efficient catalysts for nitrogen fixation. Currently, the two-dimensional (2D) graphitic carbon-nitride substrate provides abundant and evenly distributed holes for stably supporting transition-metal atoms, which presents a fascinating prospect for overcoming this challenge and promoting single-atom NRR. An emerging holey graphitic carbon-nitride skeleton with a C₁₀N₃ stoichiometric ratio (g-C₁₀N₃) from a supercell of graphene is constructed, which provides outstanding electric conductivity for achieving high-efficiency NRR due to the Dirac band dispersion. Herein, a high-throughput first-principles calculation is carried out to evaluate the feasibility of π-d conjugated SACs resulting from a single TM atom anchored on g-C₁₀N₃ (TM = Sc-Au) for NRR. We find that W metal embedded in g-C₁₀N₃ (W@g-C₁₀N₃) can compromise the ability to adsorb the key target reaction species (N₂H and NH₂), hence acquiring an optimal NRR behavior among 27 TM-candidates. Our calculations demonstrate that W@g-C₁₀N₃ shows a well-suppressed HER ability and, impressively, a low energy cost of -0.46 V. Additionally, all-around descriptors are proposed to uncover the fundamental mechanism of NRR activity, among which a 3D volcano plot (limiting potential, screening strategy, and electron origin) uncovers the NRR activity trend, achieving a quick and high-efficiency prescreening for numerous candidates. Overall, the strategy of the structure- and activity-based TM-N_x-containing unit design will offer useful insight for further theoretical and experimental attempts.

Modulating the Schottky barrier of MXenes/2D SiC contacts via functional groups and biaxial strain: a first-principles study

Two-dimensional (2D) graphene-like SiC has attracted intense interest recently due to its unique electrical and physical properties. In implementing 2D semiconductors in device applications, one of the main challenges so far has been the formation of a high-quality Schottky barrier owing to the strong Fermi level pinning (FLP) at the interface of traditional metal-2D semiconductor contacts. In this paper, the 2D MXenes Ti₃C₂T₂ (T = F, O, OH) are proposed to serve as electrodes for 2D SiC. The structural and barrier properties of the Ti₃C₂T₂/SiC contacts were systematically investigated based on first-principles calculations combined with the GGA-PBE and HSE06 functionals. It is found that Ti₃C₂T₂ can be bonded with 2D SiC by van der Waals (vdW) interactions. Weak FLP is exhibited at Ti₃C₂T₂/SiC vdW contacts. The type of contact can be tuned by changing the functional T group of Ti₃C₂T₂. Ti₃C₂F₂/SiC and Ti₃C₂O₂/SiC contacts exhibit a p-type Schottky contact and p-type Ohmic contact, respectively, whereas an n-type Ohmic contact occurs in the Ti₃C₂(OH)₂/SiC contact. In addition, the calculated tunneling possibility (T_B) is ∼20% between Ti₃C₂T₂ and SiC, indicating weak bonding at the Ti₃C₂T₂/SiC vdW junctions. Furthermore, the Schottky barrier height and T_B of the Ti₃C₂(OH)₂/SiC contacts can be modulated via the biaxial strain. The controllable contact type and barrier in Ti₃C₂T₂/SiC contacts provide guidelines for developing high-performance 2D SiC optoelectronic and electronic devices.

Trade-off effect of 3d transition metal doped boron nitride on anchoring polysulfides towards application in lithium-sulfur battery

Sulfur cathodes in lithium-sulfur batteries (LSBs) suffer from the notorious "shuttle effect", low sulfur use ratio, and tardy transformation of lithium polysulfides (LiPSs), while using two-dimensional (2D) polar anchoring materials combined with single-atom catalysis is one of the promising methods to address these issues. Herein, the 3d transition metal (TM) doped 2D boron nitrides (BN), labeled as TM-BN, are studied for the anchoring and redox kinetics of LiPSs using first principles calculations. From the simulated results, the TM atom and adjacent N atoms are active adsorption sites for binding S atoms in LiPSs/S₈ and Li atoms in LiPSs, respectively. A negative d-band center closer to the Fermi level of TM-BN is key for enhancing the binding strength of TM-S and lowering the Li₂S decomposition energy barrier, while it deteriorates the activity of adjacent N atoms. Fortunately, the electrolyte environment has little effect on the superiority of the TM-BN for binding polysulfides/S₈, guaranteeing the sturdy anchor of polysulfides/S₈ in realistic conditions. The trade-off effect on the activities of TM and adjacent N atom sites in TM-BN for binding LiPSs highlights the excellence of Ti/V/Cr-BN as modification materials for LSB.

Electrocatalytic Reduction of N2 to NH3 Over Defective 1T'-WX2 (X=S, Se, Te) Monolayers

Defects in transition metal dichalcogenides (TMDs) can serve as active sites in catalytic reactions. In this work, by means of first-principles calculations, the catalytic activities of WX₂ (X=S, Se, Te) monolayers in the 1T' phase with both vacancy defects (missing chalcogen atoms, ^X V_d ) and antisite defects (replacing chalcogen atoms with W atoms, ^X A_d ) were evaluated for the nitrogen reduction reaction (NRR). Results showed that all these defective catalysts had great potential toward electrocatalytic ammonia synthesis by exhibiting low limiting potentials (U_L ). Over 1T'-WTe₂ @^Te V_d , 1T'-WS₂ @^S A_d , 1T'-WSe₂ @^Se A_d , and 1T'-WTe₂ @^Te A_d , the corresponding U_L values were -0.49, -0.21, -0.19, and -0.15 V, much smaller than that of the benchmark catalyst, the Ru (0001) surface (U_L =-0.98 V). Furthermore, the hydrogen evolution reaction (HER) was inhibited. 1T'-WX₂ monolayers with the antisite defects showed better NRR activity than those with the vacancy defects because of the smaller steric hindrance at the former. Results suggest that the steric effect at the active surface sites should be utilized to develop better catalysts.

"Capture-Backdonation-Recapture" Mechanism for Promoting N2 Reduction by Heteronuclear Metal-Free Double-Atom Catalysts

Facing the increasingly serious energy and environmental crisis, the development of heteronuclear metal-free double-atom catalysts is a potential strategy to realize efficient catalytic nitrogen reduction with low energy consumption and no pollution because it could combine the advantages of flexible active sites in double-atom catalysts while also being pollution-free and have high Faraday efficiency in metal-free catalysts simultaneously. However, according to the existing mechanism, the finite orbits of other nonmetallic atoms, except the boron atom, reduce the possibility of metal-free catalysis and hinder the development of heteronuclear metal-free double-atom catalysts. Herein, we propose a new "capture-backdonation-recapture" mechanism, which skillfully uses the electron capture-backdonation-recapture between boron, the substrate, and other nonmetallic elements to solve the above problems. Based on this mechanism, by means of the first-principle calculations, the material structure, adsorption energy, catalytic activity, and selectivity of 36 catalysts are systematically investigated to evaluate their catalytic performance. B-Si@BP1 and B-Si@BP3 are selected for their good catalytic performance and low limiting potentials of -0.14 and -0.10 V, respectively. Meanwhile, the "capture-backdonation-recapture" mechanism is also verified by analyzing the results of adsorption energy and electron transfer. Our work broadens the ideas and lays the theoretical foundation for the development of heteronuclear metal-free double-atom catalysts in the future.

An analysis of Schottky barrier in silicene/Ga2SeS heterostructures by employing electric field and strain

Two-dimensional materials are leading the way in nanodevice applications thanks to their various advantages. Although two-dimensional materials show promise for many applications, they have certain limitations. In the last decade, the increasing demand for the applications of novel two-dimensional materials has accelerated heterostructure studies in this field. Hence, restoring the combination of two-dimensional heterostructured materials has been reported. In this paper, we show that the effect of the external electric field and biaxial strain on the silicene/Ga₂SeS heterostructure has a critical impact on the tuning of the Schottky barrier height. The findings such as the variation of the electronic band gap, interlayer charge transfer, total dipole moment, and n-type/p-type Schottky barrier transitions of the silicene/Ga₂SeS heterostructure under external effects imply that the device performance can be adjusted with Janus 2D materials.

Multi-atom cluster catalysts for efficient electrocatalysis

This review presents recent developments in the synthesis, modulation and characterization of multi-atom cluster catalysts for electrochemical energy applications.

The Role of Structured Carbon in Downsized Transition Metal-Based Electrocatalysts toward a Green Nitrogen Fixation

Electrocatalytic Nitrogen Reduction Reaction (NRR) to ammonia is one of the most recent trends of research in heterogeneous catalysis for sustainability. The stark challenges posed by the NRR arise from many factors, beyond the strongly unfavored thermodynamics. The design of efficient heterogeneous electrocatalysts must rely on a suitable interplay of different components, so that the majority of research is focusing on development of nanohybrids or nanocomposites that synergistically harness the NRR sequence. Nanostructured carbon is one of the most versatile and powerful conductive supports that can be combined with metal species in an opportune manner, so as to guide the correct proceeding of the reaction and boost the catalytic activity.