Modulating Crystal Packing, Film Morphology, and Photovoltaic Performance of Selenophene-Containing Acceptors through a Combination of Skeleton Isomeric and Regioisomeric Strategies

Enhanced Charge Generation and Transport by Incorporating a Benzotriazole Unit for Low-Cost and High-Efficiency Organic Solar Cells

The photovoltaic performance of organic solar cells (OSCs) has reached the threshold for industrial applications, but the cost of most high-performance organic photovoltaic molecules is too high to meet the needs of industrialization. Herein, two low-cost thiophene-alt-quinoxaline (TQ)-based polymers, PTQ16-10 and PTQ16-20, are designed and synthesized by incorporating a benzotriazole (BTA) unit into the PTQ10 backbone, with the consideration of expanding the chemical modifiability of PTQ10 and thus optimizing its photovoltaic properties. The incorporation of BTA induces improved light absorption, up-shifted energy levels, more orderly molecular π-π packing, enhanced molecular crystallinity, and better charge transport capacity of the two polymers. Consequently, PTQ16-10:K2-based OSCs achieve enhanced charge generation and transport with faster and more efficient hole transfer, suppressed carrier recombination, and higher charge mobilities, resulting in an impressive power conversion efficiency (PCE) of 18.83%. Meanwhile, by introducing the second acceptor K6 into the PTQ16-10:K2 host blend, the ternary device achieves an excellent PCE of 19.52%, which is among the highest PCEs of OSCs based on low-cost photovoltaic materials. More importantly, this device is highly cost-effective for industrial-scale production, with an estimated minimum sustainable price of only 0.377 $ Wp-1 (Wp = peak-Watt), which is appreciably lower than that of reported high-performance OSCs. This work offers a rational guide in the development of low-cost and high-performance organic photovoltaic molecules and suggests the great potential of PTQ16-10 in cost-effective OSCs for industrialization.

The Influence of Donor/Acceptor Interfaces on Organic Solar Cells Efficiency and Stability Revealed through Theoretical Calculations and Morphology Characterizations

End-groups halogenation strategies, generally refers to fluorination and chlorination, have been confirmed as simple and efficient methods to regulate the photoelectric performance of non-fullerene acceptors (NFAs), but a controversy over which one is better has existed for a long time. Here, two novel NFAs, C9N3-4F and C9N3-4Cl, featured with different end-groups were successfully synthesized and blended with two renowned donors, D18 and PM6, featured with different electron-withdrawing units. Detailed theoretical calculations and morphology characterizations of the interface structures indicate NFAs based on different end-groups possess different binding energy and miscibility with donors, which shows an obvious influence on phase-separation morphology, charge transport behavior and device performance. After verified by other three pairs of reported NFAs, a universal conclusion obtained as the devices based on D18 with fluorination-end-groups-based NFAs and PM6 with chlorination-end-groups-based NFAs generally show excellent efficiencies, high fill factors and stability. Finally, the devices based on D18: C9N3-4F and PM6: C9N3-4Cl yield outstanding efficiency of 18.53 % and 18.00 %, respectively. Suitably selecting donor and regulating donor/acceptor interface can accurately present the photoelectric conversion ability of a novel NFAs, which points out the way for further molecular design and selection for high-performance and stable organic solar cells.

Optimized Crystal Framework by Asymmetric Core Isomerization in Selenium-Substituted Acceptor for Efficient Binary Organic Solar Cells

Both the regional isomerization and selenium-substitution of the small molecular acceptors (SMAs) play significant roles in developing efficient organic solar cells (OSCs), while their synergistic effects remain elusive. Herein, we developed three isomeric SMAs (S-CSeF, A-ISeF, and A-OSeF) via subtly manipulating the mono-selenium substituted position (central, inner, or outer) and type of heteroaromatic ring on the central core by synergistic strategies for efficient OSCs, respectively. Crystallography of asymmetric A-OSeF presents a closer intermolecular π-π stacking and more ordered 3-dimensional network packing and efficient charge-hopping pathways. With the successive out-shift of the mono-selenium substituted position, the neat films give a slightly wider band gap and gradually higher crystallinity and electron mobility. The PM1 : A-OSeF afford favourable fibrous phase separation morphology with more ordered molecular packing and efficient charge transportation compared to the other two counterparts. Consequently, the A-OSeF-based devices achieve a champion efficiency of 18.5 %, which represents the record value for the reported selenium-containing SMAs in binary OSCs. Our developed precise molecular engineering of the position and type of selenium-based heteroaromatic ring of SMAs provides a promising synergistic approach to optimizing crystal stacking and boosting top-ranked selenium-containing SMAs-based OSCs.

Recent Advances in Selenophene-Based Materials for Organic Solar Cells

Due to the low cost, light weight, semitransparency, good flexibility, and large manufacturing area of organic solar cells (OSCs), OSCs have the opportunity to become the next generation of solar cells in some specific applications. So far, the efficiency of the OSC device has been improved by more than 20%. The optical band gap between the lowest unoccupied molecular orbital (LUMO) level and the highest occupied molecular orbital (HOMO) level is an important factor affecting the performance of the device. Selenophene, a derivative of aromatic pentacyclic thiophene, is easy to polarize, its LUMO energy level is very low, and hence the optical band gap can be reduced. In addition, the selenium atoms in selenophene and other oxygen atoms or sulfur atoms can form an intermolecular interaction, so as to improve the stacking order of the active layer blend film and improve the carrier transport efficiency. This paper introduces the organic solar active layer materials containing selenium benzene in recent years, which can be simply divided into donor materials and acceptor materials. Replacing sulfur atoms with selenium atoms in these materials can effectively reduce the corresponding optical band gap of materials, improve the mutual solubility of donor recipient materials, and ultimately improve the device efficiency. Therefore, the sulfur in thiophene can be completely replaced by selenium or oxygen of the same family, which can be used in the active layer materials of organic solar cells. This article mainly describes the application of selenium instead of sulfur in OSCs.

Substituent Effect on Vibrationally Resolved Absorption Spectra and Exciton Dynamics of Dipyrrolonaphthyridinedione Aggregates

Dipyrrolonaphthyridinedione (DPND) thin films exhibit interesting photophysical properties and singlet fission (SF) processes. A recent experimental work found that the alkyl substitution in the DPND skeleton has the remarkable influence on the characteristics of electronic absorption spectra and SF rates. Here, we theoretically elucidate the microscopic mechanism of the substituent effect on the optical properties and exciton dynamics of materials by combining the electronic structure calculations and the quantum dynamics simulations. The results show that the alkyl substituent has a minor effect on the single molecular properties but dramatically changes those of DPND aggregates via varying the intermolecular interactions. The aggregates of DPND with and without alkyl side chains exhibit the more likely characters of H-type aggregations. In the former (DPND6), the weak degree of mixing of intramolecular localized excited (LE) states and intermolecular charge transfer (CT) states makes the low-energy absorption band possess the predominant optical absorption, while in the latter (DPND), the CT and LE states are close in energy, together with their strong interaction, resulting in the substantial state-mixing, so that its two low-energy absorption bands have nearly equal oscillator strengths and a wide energy spacing of more than 0.5 eV. The simulation of exciton dynamics elucidates that the photoinitiated states in both aggregates cannot generate the free charge carrier because of the lack of enough driving forces. However, the population exchanges between LE and CT states in DPND aggregates are much faster than in DPND6 aggregates, indicating the different SF behaviors, consistent with the experimental observation.

Origin of the Additive-Induced VOC Change in Non-Fullerene Organic Solar Cells

Additives are often used to adjust the morphology of the active layer to improve the performance of organic solar cells (OSCs). Here, taking typical high-efficiency non-fullerene systems as examples, the effect of the additive on the device performance in non-fullerene OSCs is systematically investigated. Surprisingly, an unpresented V_OC change is observed in the opposite direction of the two typical systems (PM6:Y6 and PTB7-Th: ITIC) appearing after the incorporation of the additive DIO, which can be affected by the morphological differences as indicated by the several morphological studies. The bewildering V_OC change caused by the additive in different material systems is supposed to originate from the different energy level variations as verified by the energy level studies. Molecular dynamic (MD) and density functional theory (DFT) calculations are also included to get an insight into the dynamic of the additive-induced morphological differences that are supposed to contribute to the energy level changes. Combining a series of morphological and energic studies as well as the theoretical calculations, the origin of unforeseeable V_OC changes caused by additives in non-fullerene OSCs is clarified, and provides in-depth insights into the effects of additives on device performance.