Tuning of Optical Phonons in α-MoO3-VO2 Multilayers

Guided spiraling phonon polaritons in rolled one-dimensional MoO3 nanotubes

Polaritons in reduced-dimensional materials, such as nanowire, nanoribbon and rolled nanotube, usually provide novel avenues for manipulating electromagnetic fields at the nanoscale. Here, we theoretically propose and study hyperbolic phonon polaritons (HPhPs) with rolled one-dimensional molybdenum trioxide (MoO3) nanotube structure. We find that the HPhPs in rolled MoO3 nanotubes exhibit low propagation losses and tunable electromagnetic confinement along the rolled direction. By rolling the twisted bilayer MoO3, we successfully achieve a canalized phonon polaritons mode in the rolled nanotube, enabling their propagation in a spiraling manner along the nanotube. Our findings demonstrate the considerable potential of the rolled MoO3 nanotubes as promising platforms for various applications in light manipulation and nanophotonics circuits, including negative refraction, waveguiding and routing at the ultimate scale.

Weyl semimetal mediated epsilon-near-zero hybrid polaritons and the induced nonreciprocal radiation

Polaritonic excitation and management in ultra-thin polar crystals has recently received significant attention and holds new promise for epsilon-near-zero (ENZ) modes. However, manipulation of the ENZ mode via anisotropic magneto-optic (MO) material remains elusive. Herein, we provide an effective strategy for constructing an ENZ polar thin film with dependence on Weyl semimetals (WSM). The thermal radiation of the proposed device is explored with electromagnetic (EM) simulations that utilize the anisotropic rigorous coupled-wave analysis (aRCWA) method. Strong coupling of the ENZ mode to WSM polaritons has been demonstrated, and the structural parameters hold tolerance on the order of hundreds of nanometers, which is highly favorable for low-cost fabrication and high-performance application. By changing both the azimuthal angle (ϕ) and angle of incidence (θ), the nonreciprocity (η) can be effectively influenced. The distribution of η is symmetrical with ϕ = 180°, η = 0 when ϕ = 90° and ϕ = 270°. The mechanism of this proposal is owing to the hybrid polaritons supported by the polar thin film and nonreciprocal radiation of WSM, which is validated by examining the amplitude distribution of the magnetic field. The nonreciprocal emitter described herein allows simultaneous control of spectral distribution and polarization of radiation, which will facilitate the active design and application of mid-infrared (MIR) thermal emitters.

Electro-Thermal Characterization of Dynamical VO2 Memristors via Local Activity Modeling

Translating the surging interest in neuromorphic electronic components, such as those based on nonlinearities near Mott transitions, into large-scale commercial deployment faces steep challenges in the current lack of means to identify and design key material parameters. These issues are exemplified by the difficulties in connecting measurable material properties to device behavior via circuit element models. Here, the principle of local activity is used to build a model of VO2 /SiN Mott threshold switches by sequentially accounting for constraints from a minimal set of quasistatic and dynamic electrical and high-spatial-resolution thermal data obtained via in situ thermoreflectance mapping. By combining independent data sets for devices with varying dimensions, the model is distilled to measurable material properties, and device scaling laws are established. The model can accurately predict electrical and thermal conductivities and capacitances and locally active dynamics (especially persistent spiking self-oscillations). The systematic procedure by which this model is developed has been a missing link in predictively connecting neuromorphic device behavior with their underlying material properties, and should enable rapid screening of material candidates before employing expensive manufacturing processes and testing procedures.

Tunable heterostructural prism for planar polaritonic switch

The study of phonon polaritons in van der Waals materials at the nanoscale has gained significant attention in recent years due to its potential applications in nanophotonics. The unique properties of these materials, such as their ability to support sub-diffraction imaging, sensing, and hyperlenses, have made them a promising avenue for the development of new techniques in the field. Despite these advancements, there still exists a challenge in achieving dynamically reversible manipulation of phonon polaritons in these materials due to their insulating properties. In this study, we present experimental results on the reversible manipulation of anisotropic phonon polaritons in α-MoO3 on top of a VO2 film, a phase-change material known for its dramatic changes in dielectric properties between its insulating and metallic states. Our findings demonstrate that the engineered VO2 film enables a switch in the propagation of polaritons in the mid-infrared region by modifying the dielectric properties of the film through temperature changes. Our results represent a promising approach to effectively control the flow of light energy at the nanoscale and offer the potential for the design and fabrication of integrated, flat sub-diffraction polaritonic devices. This study adds to the growing body of work in the field of nanophotonics and highlights the importance of considering phase-change materials for the development of new techniques in this field.

Flatband polaritonic router in twisted bilayer van der Waals materials

In recent years, van der Waals (vdW) polaritons excited by the hybrid of matter and photons have shown great promise for applications in nanoimaging, biosensing, and on-chip light guiding. In particular, polaritons with a flatband dispersion allow for mode canalization and diffractionless propagation, which showcase advantages for on-chip technologies requiring long-range transportation of optical information. Here, we propose a flatband polaritonic router based on twisted α-MoO₃ bilayers, which allows for on-chip routing of highly confined and low-loss phonon polaritons (PhPs) along multichannel propagating paths under different circular polarized dipole excitations. Our work combines flatband physics and optical spin- orbit coupling, with potential applications in nanoscale light propagation, on-chip optical switching, and communication.

Enhanced efficiency of launching hyperbolic phonon polaritons in stacked α-MoO3 flakes

In this work, we reported a systemic study on the enhanced efficiency of launching hyperbolic phonon polaritons (PhPs) in stacked α-phase molybdenum trioxide (α-MoO₃) flakes. By using the infrared photo-induced force microscopy (PiFM), real-space near-field images (PiFM images) of mechanically exfoliated α-MoO₃ thin flakes were recorded within three different Reststrahlen bands (RBs). As referred with PiFM fringes of the single flake, PiFM fringes of the stacked α-MoO₃ sample within the RB 2 and RB 3 are greatly improved with the enhancement factor (EF) up to 170%. By performing numerical simulations, it reveals that the general improvement in near-field PiFM fringes arises from the existence of a nanoscale thin dielectric spacer in the middle part between two stacked α-MoO₃ flakes. The nanogap acts as a nanoresonator for prompting the near-field coupling of hyperbolic PhPs supported by each flake in the stacked sample, contributing to the increase of polaritonic fields, and verifying the experimental observations Our findings could offer fundamental physical investigations into the effective excitation of PhPs and will be helpful for developing functional nanophotonic devices and circuits.

Polaritons in Van der Waals Heterostructures

2D monolayers supporting a wide variety of highly confined plasmons, phonon polaritons, and exciton polaritons can be vertically stacked in van der Waals heterostructures (vdWHs) with controlled constituent layers, stacking sequence, and even twist angles. vdWHs combine advantages of 2D material polaritons, rich optical structure design, and atomic scale integration, which have greatly extended the performance and functions of polaritons, such as wide frequency range, long lifetime, ultrafast all-optical modulation, and photonic crystals for nanoscale light. Here, the state of the art of 2D material polaritons in vdWHs from the perspective of design principles and potential applications is reviewed. Some fundamental properties of polaritons in vdWHs are initially discussed, followed by recent discoveries of plasmons, phonon polaritons, exciton polaritons, and their hybrid modes in vdWHs. The review concludes with a perspective discussion on potential applications of these polaritons such as nanophotonic integrated circuits, which will benefit from the intersection between nanophotonics and materials science.

Enabling Active Nanotechnologies by Phase Transition: From Electronics, Photonics to Thermotics

Phase transitions can occur in certain materials such as transition metal oxides (TMOs) and chalcogenides when there is a change in external conditions such as temperature and pressure. Along with phase transitions in these phase change materials (PCMs) come dramatic contrasts in various physical properties, which can be engineered to manipulate electrons, photons, polaritons, and phonons at the nanoscale, offering new opportunities for reconfigurable, active nanodevices. In this review, we particularly discuss phase-transition-enabled active nanotechnologies in nonvolatile electrical memory, tunable metamaterials, and metasurfaces for manipulation of both free-space photons and in-plane polaritons, and multifunctional emissivity control in the infrared (IR) spectrum. The fundamentals of PCMs are first introduced to explain the origins and principles of phase transitions. Thereafter, we discuss multiphysical nanodevices for electronic, photonic, and thermal management, attesting to the broad applications and exciting promises of PCMs. Emerging trends and valuable applications in all-optical neuromorphic devices, thermal data storage, and encryption are outlined in the end.

Tuning and hybridization of surface phonon polaritons in α-MoO3 based metamaterials

We propose an effective medium approach to tune and control surface phonon polariton dispersion relations along the three main crystallographic directions of α-phase molybdenum trioxide. We show that a metamaterial consisting of subwavelength air inclusions into the α-MoO₃ matrix displays new absorption modes producing a split of the Reststrahlen bands of the crystal and creating new branches of phonon polaritons. In particular, we report hybridization of bulk and surface polariton modes by tailoring metamaterials' structural parameters. Theoretical predictions obtained with the effective medium approach are validated by full-field electromagnetic simulations using finite difference time domain method. Our study sheds light on the use of effective medium theory for modeling and predicting wavefront polaritons. Our simple yet effective approach could potentially enable different functionalities for hyperbolic infrared metasurface devices and circuits on a single compact platform for on-chip infrared photonics.