Effects of the Polarity and Bulkiness of End-Functionalized Side Chains on the Charge Transport of Dicyanovinyl-End-Capped Diketopyrrolopyrrole-Based n-Type Small Molecules

Vinylene-linked diketopyrrolopyrrole chromophores for electrochromism

We report a novel series of vinylene-linked DPP compounds (1-5) formed via Knoevenagel condensation of dimethyl DPP (6) with various aromatic aldehydes. Incorporating the vinylene linkage and photo- and electro-active groups offered the distinct advantage of extending π-delocalization, resulting in deep-coloured solids with absorption maxima extending to 620-680 nm and low redox potentials. The DPP-triphenylamine compound (5) showed electrochromism in the near-infrared region. The colour of the solution changed from blue to green, and the absorption from 680 nm to 740 nm, leading to NIR-to-NIR absorption switching. This system exhibits rapid switching, swift response times (1.4 s and 1.2 s), and reversibility in electrochromic behaviour.

Oxygen-Induced Lattice Strain for High-Performance Organic Transistors with Enhanced Stability

Integrating the merits of low cost, flexibility, and large-area processing, organic semiconductors (OSCs) are promising candidates for the next-generation electronic materials. The mobility and stability are the key figures of merit for its practical application. However, it is greatly challenging to improve the mobility and stability simultaneously owing to the weak interactions and poor electronic coupling between OSCs molecules. Here, an oxygen-induced lattice strain (OILS) strategy is developed to achieve OSCs with both high mobility and high stability. Utilizing the strategy, the maximum mobility of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) organic field-effect transistor (OFET) rises to 15.3 cm2  V-1  s-1 and the contact resistance lowers to 25.5 Ω cm. Remarkably, the thermal stability of DNTT is much improved, and a record saturated power density of ≈3.4 × 104  W cm-2 is obtained. Both the experiments and theoretical calculations demonstrate that the lattice compressive strain induced by oxygen is responsible for their high performance and stability. Furthermore, the universality of the strategy is manifested in both n-type and p-type small OSCs. This work provides a novel strategy to improve both the mobility and the stability of OSCs, paving the way for the practical applications of organic devices.

Structural Study of Diketopyrrolopyrrole Derivative Thin Films: Influence of Deposition Method, Substrate Surface, and Aging

We report the morphology and microstructure of n-dialkyl side-chain-substituted thiophene DPP end-capped with phenyl groups (Ph-TDPP-Ph) thin films and compare the influence of deposition method and substrate surface using thermally oxidized Si and graphene substrates as well as monolayer graphene surfaces with an underlying self-assembled octadecyltrichlorosilane monolayer, complemented by an aging study of spin-coated films over a 2 weeks aging period. A distinct difference in morphology was observed between spin-coated and vacuum-deposited thin films, which formed a fiber-like morphology and a continuous layer of terraced grains, respectively. After an initial film evolution, all combinations of deposition method and substrate type result in well-ordered thin films with almost identical crystalline phases with slight variations in crystallinity and mosaicity. These findings point toward strong intermolecular forces dominating during growth, and the templating effect observed for other oligomer films formed on graphene is consequently ineffective for this material type. Upon aging of spin-coated films, a noticeable evolution involving two different morphologies and crystalline phases were observed. After several days, the thin film evolved into a more stable crystal phase and a fiber-like morphology. Moreover, slight variation in optical spectra were elucidated on the basis on density functional theory calculations. These results demonstrate that thin-film properties of DPP derivatives can be tailored by manipulating the film formation process.

3D-Printed Organic Conjugated Trimer for Visible-Light-Driven Photocatalytic Applications

Small molecule organic semiconductors (SMOSs) have emerged as a new class of photocatalysts that exhibit visible light absorption, tunable bandgap, good dispersion, and solubility. However, the recovery and reusability of such SMOSs in consecutive photocatalytic reactions is challenging. This work concerns a 3D-printed hierarchical porous structure based on an organic conjugated trimer, named EBE. Upon manufacturing, the photophysical and chemical properties of the organic semiconductor are maintained. The 3D-printed EBE photocatalyst shows a longer lifetime (11.7 ns) compared to the powder-state EBE (1.4 ns). This result indicates a microenvironment effect of the solvent (acetone), a better dispersion of the catalyst in the sample, and reduced intermolecular π-π stacking, which results in improved separation of the photogenerated charge carriers. As a proof-of-concept, the photocatalytic activity of the 3D-printed EBE catalyst is evaluated for water treatment and hydrogen production under sun-like irradiation. The resulting degradation efficiencies and hydrogen generation rates are higher than those reported for the state-of-the-art 3D-printed photocatalytic structures based on inorganic semiconductors. The photocatalytic mechanism is further investigated, and the results suggest that hydroxyl radicals (HO⋅) are the main reactive radicals responsible for the degradation of organic pollutants. Moreover, the recyclability of the EBE-3D photocatalyst is demonstrated in up to 5 uses. Overall, these results indicate the great potential of this 3D-printed organic conjugated trimer for photocatalytic applications.

The solvent effect on the morphology and molecular ordering of benzothiadiazole-based small molecule for inkjet-printed thin-film transistors

A small molecule organic semiconductor, D(D'-A-D')₂ comprising benzothiadiazole as an acceptor, 3-hexylthiophene, and thiophene as donors, was successfully synthesized. X-ray diffraction and atomic force microscopy were used to investigate the effect of a dual solvent system with varying ratios of chloroform and toluene on film crystallinity and film morphology via inkjet printing. The film prepared with a chloroform to toluene ratio of 1.5 : 1 showed better performance with improved crystallinity and morphology due to having enough time to control the arrangement of molecules. In addition, by optimizing ratios of CHCl₃ to toluene, the inkjet-printed TFT based on 3HTBTT using a CHCl₃ and toluene ratio of 1.5 : 1 was successfully fabricated and exhibited a hole mobility of 0.01 cm² V^-1 s^-1 due to the improved molecular ordering of the 3HTBTT film.