Encapsulation-Enabled Perovskite-PMMA Films Combining a Micro-LED for High-Speed White-Light Communication

Highly luminescent and stable CsPbBr3 perovskite nanocrystals coated with polyethersulfone for white light-emitting diode applications

Simultaneously improving the stability and photoluminescence quantum yield (PLQY) of all inorganic perovskite nanocrystals (NCs) is crucial for their practical utilization in various optoelectronic devices. Here, CsPbBr3 NCs coated with polyethersulfone (PES) were prepared via an in-situ co-precipitation method. The sulfone groups in PES bind to undercoordinated lead ion (Pb2+) on the CsPbBr3 NCs, resulting in significant reduction of surface defects, thus enhancing the PLQY from 74.2% to 88.3%. Meanwhile, the PES-coated NCs exhibit high water resistance and excellent heat and light stability, maintaining over 85% of the initial PL intensity under thermal aging (70°C, 4 h) and continuous 365 nm ultraviolet (UV) light irradiation (24 W, 8 h) conditions. By contrast, the PL intensity of the control NCs dramatically dropped to less than 40%. Finally, a diode emitting bright white light was fabricated utilizing the PES-coated CsPbBr3 NCs, which exhibits a color gamut of ~110% NTSC standard.

Improving optoelectronic performance and modulation bandwidth of green µ-LEDs via a compound pre-strained strategy

A composite strain-modulation strategy to achieve high-performing green µ-LED devices for visible light communication is proposed. Compared with the conventional pre-well structure, introducing a pre-layer to enlarge the lateral lattice constant of the underlayer decreased the strain in the overall strain-modulated layer and MQW. This improved the crystal quality and suppressed the quantum confinement Stark effect. Using this modulation strategy, the green µ-LED array with the compound pre-strained structure exhibited a light output power of 20.5 mW and modulation bandwidth of 366 MHz, corresponding to improvements of 61% and 78%, respectively, compared with those of µ-LEDs with a pre-well structure.

Highly stable CsPbBr3/ PMA perovskite nanocrystals for improved optical performance

In this study, to address the stability issues, we synthesized a CsPbBr3-coated poly (maleic anhydride-alt-1-octadecene) (CsPbBr3/PMA) using a modified hot-injection method. The CsPbBr3/PMA perovskite nanocrystals (PNCs) exhibited effective green emission at 522 nm with an improved photoluminescence quantum yield (86.8 %) compared to traditional CsPbBr3 PNCs (54.2 %). The ligands in the polymer coating can bond with the uncoordinated Pb and Br ions on the surface of PNCs to minimize surface defects and avoid exposure to the external environment, enhancing the stability of the perovskites. Time-resolved photoluminescence spectra showed longer lifetimes for CsPbBr3/PMA PNCs, while transient absorption measurements provided valuable insights into the intraband hot-exciton relaxation and recombination. We demonstrate the potential application of CSPbBr3/PMA in a down-conversion white-light-emitting diode (LED) by coupling green CsPbBr3/PMA and red K2SiF6:Mn4+ phosphor-coated glass slides onto a 455-nm blue GaN LED. The white LED produced a white light with the International Commission on Illumination color coordinates of (0.323, 0.345), luminous efficiency of 58.4 lm/W, and color rendering index of 83.2. The fabricated, white-LED system obtained a wide color gamut of 125.3 % of the National Television Standards Committee and 98.9 % of Rec. 2020. The findings demonstrate that CsPbBr3/PMA can be an efficient down-conversion material for white LEDs and backlighting.

Engineering Metal-Organic Frameworks with Tunable Colors for High-Performance Wireless Communication

Metal-organic frameworks (MOFs) have emerged as excellent platforms possessing tunable and controllable optical behaviors that are essential in high-speed and multichannel data transmission in optical wireless communications (OWCs). Here, we demonstrate a novel approach to achieving a tunable wide modulation bandwidth and high net data rate by engineering a combination of organic linkers and metal clusters in MOFs. More specifically, two organic linkers of different emission colors, but equal molecular length and connectivity, are successfully coordinated by zirconium and hafnium oxy-hydroxy clusters to form the desired MOF structures. The precise change in the interactions between these different organic linkers and metal clusters enables control over fluorescence efficiency and excited state lifetime, leading to a tunable modulation bandwidth from 62.1 to 150.0 MHz and a net data rate from 303 to 363 Mb/s. The fabricated color converter MOFs display outstanding performance that competes, and in some instances surpasses, those of conventional materials commonly used in light converter devices. Moreover, these MOFs show high practicality in color-pure wavelength-division multiplexing (WDM), which significantly improved the data transmission link capacity and security by the contemporary combining of two different data signals in the same path. This work highlights the potential of engineered MOFs as a game-changer in OWCs, with significant implications for future high-speed and secure data transmission.

High bandwidth semipolar (20-21) micro-LED-based white light-emitting diodes utilizing perovskite quantum dots and organic emitters in color-conversion layers for visible light communication and solid-state lighting applications

We demonstrate semipolar (20-21) micro-LED-based high-bandwidth WLEDs utilizing perovskite QDs and organic emitters in color-conversion films. The WLEDs exhibit a bandwidth in excess of 1 GHz and a CCT of 6141 K, making these devices suitable for visible light communication and lighting applications.

Transmitter for 1.9 Gbps phosphor white light visible light communication without a blue filter based on OOK-NRZ modulation

Due to narrow bandwidth and slow yellow light, it is difficult for visible light communication (VLC) systems based on high-power phosphor-coated light-emitting diodes (LEDs) to support high data rates. In this paper, a novel transmitter based on a commercial phosphor-coated LED is proposed, which can achieve a wideband VLC system without a blue filter. The transmitter consists of a folded equalization circuit and a bridge-T equalizer. The folded equalization circuit is based on a new equalization scheme and can expand the bandwidth of high-power LEDs more significantly. The bridge-T equalizer is used to reduce the influence of the slow yellow light generated by the phosphor-coated LED, which is more suitable than blue filters. Utilizing the proposed transmitter, the 3 dB bandwidth of the VLC system using the phosphor-coated LED is extended from several megahertz to 893 MHz. As a result, the VLC system can support real-time on-off keying non-return to zero (OOK-NRZ) data rates up to 1.9 Gb/s at a distance of 7 m with a bit error rate (BER) of 3 × 10^-5.

Highly efficient copper-based halide single crystals with violet emission for visible light communication

K₂CuBr₃ single crystals (SCs) are synthesized using a cooling-induced crystallization method with violet emission due to self-trapped excitons (STEs) under photoexcitation. The prepared K₂CuBr₃ SCs exhibit a high photoluminescence quantum yield (PLQY, 79.2%) and excellent stability against moisture, heat and UV light. When the K₂CuBr₃ SCs are used as a light source for visible light communication the data transmission rate reaches a striking 248 Mbps, which is more than 33-fold the -3 dB bandwidth.

Recent progress and future prospects on halide perovskite nanocrystals for optoelectronics and beyond

As an emerging new class of semiconductor nanomaterials, halide perovskite (ABX₃, X = Cl, Br, or I) nanocrystals (NCs) are attracting increasing attention owing to their great potential in optoelectronics and beyond. This field has experienced rapid breakthroughs over the past few years. In this comprehensive review, halide perovskite NCs that are either freestanding or embedded in a matrix (e.g., perovskites, metal-organic frameworks, glass) will be discussed. We will summarize recent progress on the synthesis and post-synthesis methods of halide perovskite NCs. Characterizations of halide perovskite NCs by using a variety of techniques will be present. Tremendous efforts to tailor the optical and electronic properties of halide perovskite NCs in terms of manipulating their size, surface, and component will be highlighted. Physical insights gained on the unique optical and charge-carrier transport properties will be provided. Importantly, the growing potential of halide perovskite NCs for advancing optoelectronic applications and beyond including light-emitting devices (LEDs), solar cells, scintillators and X-ray imaging, lasers, thin-film transistors (TFTs), artificial synapses, and light communication will be extensively discussed, along with prospecting their development in the future.

All-inorganic liquid phase quantum dots and blue laser diode-based white-light source for simultaneous high-speed visible light communication and high-efficiency solid-state lighting

In recent years, cesium lead bromide (CsPbBr₃) and cadmium selenide/zinc sulfide (CdSe/ZnS) quantum dots have been widely investigated to enhance the capacity of visible light communication (VLC) and solid-state lighting (SSL). Herein, liquid-phase color converter (LCC) glass cavities and solid-phase color converter (SCC) films with green-emitting CsPbBr₃ and red-emitting CdSe/ZnS are fabricated to investigate and compare their performance. A facile high-quality LCC-based white laser diode (WLD) is fabricated by combining blue LD with LCC CsPbBr₃ and CdSe/ZnS glass cavities as color conversion layers. The LCC-based WLD achieves bright white light with a color rendering index of 85, a correlated color temperature of 5520 K, and a Commission Internationale de L'Eclairage (CIE) coordinates at (0.32, 0.34). Moreover, the VLC system exhibits a modulation bandwidth of 855 MHz and the capability to transmit a real-time data rate of up to 2.1 Gbps over a transmission distance of 1.2 meters. These results indicate that the fabricated WLD is a promising lighting device for simultaneous high-speed VLC and high-efficiency SSL.

Highly Stable and Moisture-Immune Monocomponent White Perovskite Phosphor by Trifluoromethyl (-CF3) Regulation

Halide perovskites are emerging as promising candidates for white light solid state lighting. Nevertheless, there are still challenges of a high water stability, a tunable color temperature, and a high photoluminescence quantum yield (PLQY). Herein, we report hydrophobic, electron-withdrawing trifluoromethyl (-CF₃)-modified phenethylamine lead bromide (PEA₂PbBr₄) with ultrahigh stability in water for >2 months, and the broadband white light emission is illustrated by self-trapped excitons attributed to exciton-phonon coupling that coordinate molecular vibration, lattice distortion, and electrostatic interaction. In particular, by Mn²⁺ doping, the emission color can be tuned from cold (10237 K) to warm (2406 K), and a greatly enhanced PLQY of ≤87.93% can be achieved. Furthermore, the perovskites also possess an excellent color rendering index (the highest is 94). A monocomponent white light-emitting diode with amazing CIE 1931 coordinates of (0.33, 0.32) is further assembled, demonstrating a luminance of 471.5 cd m^-2 at 50 mA and good long-term operation stability after >2 months. This study of highly efficient and stable perovskites with high-quality white light emission will open up new opportunities in solid state lighting.

2.805 Gbit/s high-bandwidth phosphor white light visible light communication utilizing an InGaN/GaN semipolar blue micro-LED

We propose and implement a high-bandwidth white-light visible light communication (VLC) system accomplishing data rate of 2.805 Gbit/s utilizing a semipolar blue micro-LED. The system uses an InGaN/GaN semipolar (20-21) blue micro-LED to excite yellow phosphor film for high-speed VLC. The packaged 30 μm 2 × 4 blue micro-LED array has an electrical-to-optical (EO) bandwidth of 1042.5 MHz and a peak wavelength of 447 nm. The EO bandwidth of the white-light VLC system is 849 MHz. Bit error rate (BER) of 2.709 × 10^-3 meeting the pre-forward error correction (FEC) threshold is accomplished by employing a bit and power loaded orthogonal frequency division multiplexing (OFDM) signal. The proposed white-light VLC system employs simple and inexpensive yellow phosphor film for white-light conversion, complex color conversion material is not needed. Besides, no optical blue filter is employed in the white-light VLC system. The fabrication of the InGaN/GaN semipolar (20-21) blue micro-LED is discussed, and its characteristics are also evaluated.