Toward Optimal Photocatalytic Hydrogen Generation from Water Using Pyrene-Based Metal-Organic Frameworks

Unraveling metal effects on CO2 uptake in pyrene-based metal-organic frameworks

Pyrene-based metal-organic frameworks (MOFs) have tremendous potential for various applications. With infinite structural possibilities, the MOF community often relies on simulations to identify the most promising candidates for given applications. Among thousands of reported structures, many exhibit limited reproducibility - in either synthesis, performance, or both - owing to the sensitivity of synthetic conditions. Geometric distortions that may arise in the functional groups of pyrene-based ligands during synthesis and/or activation cannot easily be predicted. This sometimes leads to discrepancies between in silico and experimental results. Here, we investigate a series of pyrene-based MOFs for carbon capture. These structures share the same ligand (1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy)) but have different metals (M-TBAPy, M = Al, Ga, In, and Sc). The ligands stack parallel in their orthorhombic crystal structure, creating a promising binding site for CO2. As predicted, the metal is shown to affect the pyrene stacking distance and, therefore, the CO2 uptake. Here, we investigate the metal's intrinsic effects on the MOFs' crystal structure. Crystallographic analysis shows the emergence of additional phases, which thus impacts the overall adsorption characteristics of the MOFs. Considering these additional phases improves the prediction of adsorption isotherms, enhancing our understanding of pyrene-based MOFs for carbon capture.

Rapid Recognition and Monitoring of Multiple Core Biomarkers with Point-of-Care Importance through Combinatorial DNA Logic Operation

The early diagnosis of a disease relies on the reliable identification and quantitation of multiple core biomarkers in real-time point-of-care (POC) testing. To date, most of the multiplex photoelectrochemical (PEC) assays are inaccessible to home healthcare due to cumbersome steps, long testing time, and limited detection efficiency. The rapid and fast-response generation of independent photocurrent for multiple targets is still a great challenge. Herein, a combinatorial DNA logic operation-guided multiplex PEC sensor is constructed to facilely distinguish and simultaneously monitor two core biomarkers that are essential for identifying asymptomatic Alzheimer patients and predicting the progression of the disease. The aptamers of amyloid-β oligomers (AβO) and Tau441 protein are simply integrated at the high-performance In-TBAPy photocathode. In the presence of AβO and Tau441 protein, the aptamer-target affinity complexes are formed and subsequently detached from the electrode surface, resulting in an increase of photocurrent. Through programming concatenated DNA molecular circuits, a 2-target input OR logic gate not only simplifies the manufacturing process of the multiplex PEC sensor but also realizes rapid and intelligent multiple-target recognition. As a conceptual prototype for the development of more sophisticated and complicated logic devices, the proposed DNA molecular logic system may open a new horizon for rapid disease diagnosis and POC analysis.

Ba/Ti MOF: A Versatile Heterogeneous Photoredox Catalyst for Visible-Light Metallaphotocatalysis

The field of sustainable heterogeneous catalysis is evolving rapidly, with a strong emphasis on developing catalysts that enhance efficiency. Among various heterogeneous photocatalysts, metal-organic frameworks (MOFs) have gained significant attention for their exceptional performance in photocatalytic reactions. In this context, contrary to the conventional homogeneous iridium or ruthenium-based photocatalysts, which face significant challenges in terms of availability, cost, scalability, and recyclability, a new Ba/Ti MOF (ACM-4) is developed as a heterogeneous catalyst that can mimic/outperform the conventional photocatalysts, offering a more sustainable solution for efficient chemical processes. Its redox potential and triplet energy are comparable to or higher than the conventional catalysts, organic dyes, and metal semiconductors, enabling its use in both electron transfer and energy transfer applications. It facilitates a broad range of coupling reactions involving pharmaceuticals, agrochemicals, and natural products, and is compatible with various transition metals such as nickel, copper, cobalt, and palladium as co-catalysts. The effectiveness of the ACM-4 as a photocatalyst is supported by comprehensive material studies, photophysical, and recycling experiments. These significant findings underscore the potential of ACM-4 as a highly versatile and cost-effective photoredox catalyst, providing a sustainable, one-material solution for efficient chemical processes.

What Up with MOFs in Photocatalysis (?): Exploring the Influence of Experimental Conditions on the Reproducibility of Hydrogen Evolution Rates

Metal-organic frameworks (MOFs) are regarded as promising materials for energy applications, particularly in photocatalytic hydrogen (H2) production. This is due to their structural architectures that facilitate charge transfer, and tunable porous and light absorption properties. However, the many characteristics of MOFs including crystal morphology and sizes, surface facets, porosity, light absorption properties, and optical band gaps, can significantly influence their photocatalytic activity, presenting challenges in achieving reproducibility. In this study, we describe the synthesis of five distinct batches of the photoactive MOF, MIL-125-NH2, utilizing different synthetic conditions. Solid-state characterization confirmed the purity, porosity, and light absorption properties of each MOF batch. Each material was then combined with nano sized Ni2P as a cocatalyst, and their photocatalytic activity for H2 evolution was evaluated. We observed variations in their photocatalytic H2 evolution rates, which depended on the batch of MIL-125-NH2 utilized, ranging from the lowest rate of 2980 μmol·h-1·g-1 to the highest of 4327 μmol·h-1·g-1. Notably, different H2 evolution rates were also observed even when MIL-125-NH2 was synthesized under identical synthetic conditions but by different students. Our research highlights the critical relationship between MOF synthesis parameters─such as reaction time, temperature, and precursor concentration─and resulting properties, including particle size, morphology, surface facets, and light absorption characteristics. These factors significantly influence their photocatalytic activity, as evidenced by varying H2 evolution rates. This underscores the importance of optimizing materials synthesis conditions to improve reproducibility and efficiency in photocatalytic applications.

Removal of organic dyes from aqueous solution using a novel pyrene appended Zn(II)-based metal-organic framework and its photocatalytic properties

In this study, we report the efficient removal of organic dyes from aqueous solutions using a newly synthesized pyrene-appended Zn(II)-based metal-organic framework (MOF), ZnSiF6Pyrene MOF, with the chemical formula C52H32F6N4SiZn·4(CHCl3). The MOF was synthesized through a facile method at room temperature using a dipyridylpyrene ligand and ZnSiF6 metal source, resulting in a highly crystalline structure with pyrene functional groups forming the framework. The synthesized MOF was characterized using various analytical techniques, including Fourier-transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD) analysis, and scanning electron microscopy (SEM). Thermal stability was assessed using thermogravimetric analysis (TGA), while the surface area of the MOF was determined using a Brunauer-Emmett-Teller (BET) surface analyzer. Furthermore, the single-crystal X-ray diffraction (SCXRD) structure was studied to authenticate its solid-state structure. The as-synthesized MOF exhibited remarkable adsorption capacity towards various organic dyes, including Congo red (CR), rhodamine B (RhB), and methyl violet (MV), due to its ample surface area and strong π-π interactions between the pyrene moieties and dye molecules, as demonstrated by experimental and in silico docking studies. The photocatalytic degradation of MV dye was also investigated. Detailed trapping tests indicate that hydroxyl (˙OH) and superoxide (O2˙-) radicals are likely the primary active species responsible for the photodegradation of the dye under study. Furthermore, the photocatalytic property of the MOF was investigated under visible light irradiation, demonstrating excellent ability to generate singlet oxygen. This study highlights the potential of pyrene-appended Zn(II)-based MOFs as promising materials for environmental remediation applications.

Elucidation of the role of metals in the adsorption and photodegradation of herbicides by metal-organic frameworks

Here, four MOFs, namely Sc-TBAPy, Al-TBAPy, Y-TBAPy, and Fe-TBAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoic acid)pyrene), were characterized and evaluated for their ability to remediate glyphosate (GP) from water. Among these materials, Sc-TBAPy demonstrates superior performance in both the adsorption and degradation of GP. Upon light irradiation for 5 min, Sc-TBAPy completely degrades 100% of GP in a 1.5 mM aqueous solution. Femtosecond transient absorption spectroscopy reveals that Sc-TBAPy exhibits enhanced charge transfer character compared to the other MOFs, as well as suppressed formation of emissive excimers that could impede photocatalysis. This finding was further supported by hydrogen evolution half-reaction (HER) experiments, which demonstrated Sc-TBAPy's superior catalytic activity for water splitting. In addition to its faster adsorption and more efficient photodegradation of GP, Sc-TBAPy also followed a selective pathway towards the oxidation of GP, avoiding the formation of toxic aminomethylphosphonic acid observed with the other M3+-TBAPy MOFs. To investigate the selectivity observed with Sc-TBAPy, electron spin resonance, depleted oxygen conditions, and solvent exchange with D2O were employed to elucidate the role of different reactive oxygen species on GP photodegradation. The findings indicate that singlet oxygen (1O2) plays a critical role in the selective photodegradation pathway achieved by Sc-TBAPy.

Recent advances in metal-organic frameworks: Synthesis, application and toxicity

Metal-organic frameworks (MOFs) are a new class of crystalline porous hybrid materials with high porosity, large specific surface area and adjustable channel structure and biocompatibility, which are being investigated with increasing interest for energy storage and conversion, gas adsorption/separation, catalysis, sensing and biomedicine. However, the practical applications of MOFs make them release into the environment inevitable, posing a threat to humans and organisms. In this article, we cover advances in the currently available MOFs synthesis methods and the emerging applications of MOFs, especially in the biomedical field (therapeutic agents and bioimaging). Additionally, after evaluating the current status of main exposure routes and affecting factors in the field of MOFs-toxicity, the molecular mechanism is also clarified and identified. Knowledge gaps are identified from such a summarization and frontier development are explored for MOFs. Afterwards, we also present the limitations, challenges, and future perspectives in the study of the entire life cycle of MOFs. This review emphasizes the need for a more targeted discussion of the latest, widely used and effective versatile material class in order to exploit the full potential of high-performance and non-toxicity MOFs in the future.

Charge Transfer Process of a Solvated Hydrogen-Bonded Organic Network

We show the first example of an organic linker (OL) terminated by carboxylic groups that can form a hydrogen-bonded network/polymer (HBN) in solution under controlled conditions in which the photogenerated charges can hop from a monomer OL to the hydrogen-bonded backbone of OLs, as probed by transient absorption (fs-TA). While fs-TA reveals a slow twisting process in the monomer form of the OL, the formation of a hydrogen-bonded network in solution suppresses such process and favors instead a charge transfer (CT) state along the low-lying hydrogen-bonded backbone. Theoretical calculations show that such solvated HBN in a specific polar solvent is stabilized due to the huge change of the dipole moment from monomer compared to the network, leading to a charge delocalization character due to the symmetry breaking. Our findings will open new avenues for implementing solvated hydrogen-bonded molecules in applications such as sensing and photocatalysis.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

The Effect of Linker-to-Metal Energy Transfer on the Photooxidation Performance of an Isostructural Series of Pyrene-Based Rare-Earth Metal-Organic Frameworks

The tetratopic linker, 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) along with rare-earth (RE) ions is used for the synthesis of 9 isostructures of a metal-organic framework (MOF) with shp topology, named RE-CU-10 (RE = Y(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), and Lu(III)). The synthesis of each RE-CU-10 analogue requires different reaction conditions to achieve phase pure products. Single crystal X-ray diffraction indicates the presence of a RE9 -cluster in Y- to Tm-CU-10, while a RE11 -cluster is observed for Yb- and Lu-CU-10. The photooxidation performance of RE-CU-10 analogues is evaluated, observing competition between linker-to-metal energy transfer versus the generation of singlet oxygen. The singlet oxygen produced is used to detoxify a mustard gas simulant 2-chloroethylethyl sulfide, with half-lives ranging from 4.0 to 5.8 min, some of the fastest reported to date using UV-irradiation and < 1 mol% catalyst, in methanol under O2 saturation.