Thiocyanate-Passivated Diaminonaphthalene-Incorporated Dion-Jacobson Perovskite for Highly Efficient and Stable Solar Cells

Organic Semiconductor Based on N, S-Containing Crown Ether Enabling Efficient and Stable Perovskite Solar Cells

The uncoordinated lead cations are ubiquitous in perovskite films and severely affect the efficiency and stability of perovskite solar cells (PSCs). In this work, 15-crown-5 with various heteroatoms are connected to the organic semiconductor carbazole diphenylamine, and two new compounds, CDT-S and CDT-N, are developed to modify the Pb2+ defects in perovskite films through the anti-solvent method. Apart from the oxygen atoms, there are also N atoms on crown ether ring in CDT-N, and both S and N heteroatoms in CDT-S. The heteroatoms enhance the interaction between the crown ether-based semiconductors and the undercoordinated Pb2+ defect in perovskite. Particularly, the stronger interaction between S atoms and Pb2+ further enhances the defect passivation effect of CDT-S than CDT-N, thereby more effectively suppressing the non-radiative recombination of charge carriers. Finally, the efficiency of the device treated with CDT-S is up to 23.05 %. Moreover, the unencapsulated device based on CDT-S maintained 90.5 % of the initial efficiency after being stored under dark conditions for 1000 hours, demonstrating good long-term stability. Our work demonstrates that crown ethers are promising in perovskite solar cells, and the crown ether containing multiple heteroatoms could effectively improve both efficiency and stability of devices.

3-Thiophenemalonic Acid Additive Enhanced Performance in Perovskite Solar Cells

The development of ambient-air-processable organic-inorganic halide perovskite solar cells (OIHPSCs) is a challenge necessary for the transfer of laboratory-scale technology to large-scale and low-cost manufacturing of such devices. Different approaches like additives, antisolvents, composition engineering, and different deposition techniques have been employed to improve the morphology of the perovskite films. Additives that can form Lewis acid-base adducts are known to minimize extrinsic impacts that trigger defects in ambient air. In this work, we used the 3-thiophenemalonic acid (3-TMA) additive, which possesses thiol and carboxyl functional groups, to convert PbI2, PbCl2, and CH3NH3I to CH3NH3PbI3 completely. This strategy is effective in regulating the kinetics of crystallization and improving the crystallinity of the light-absorbing layer under high relative humidity (RH) conditions (30-50%). As a result, the 3-TMA additive increases the yield of the power conversion efficiency (PCE) from 14.9 to 16.5% and its stability under the maximum power point. Finally, we found that the results of this work are highly relevant and provide additional inputs to the ongoing research progress related to additive engineering as one of the efficient strategies to reduce parasitic recombination and enhance the stability of inverted OIHPSCs in ambient environment processing.

Operando dynamics of trapped carriers in perovskite solar cells observed via infrared optical activation spectroscopy

Conventional spectroscopies are not sufficiently selective to comprehensively understand the behaviour of trapped carriers in perovskite solar cells, particularly under their working conditions. Here we use infrared optical activation spectroscopy (i.e., pump-push-photocurrent), to observe the properties and real-time dynamics of trapped carriers within operando perovskite solar cells. We compare behaviour differences of trapped holes in pristine and surface-passivated FA0.99Cs0.01PbI3 devices using a combination of quasi-steady-state and nanosecond time-resolved pump-push-photocurrent, as well as kinetic and drift-diffusion models. We find a two-step trap-filling process: the rapid filling (~10 ns) of low-density traps in the bulk of perovskite, followed by the slower filling (~100 ns) of high-density traps at the perovskite/hole transport material interface. Surface passivation by n-octylammonium iodide dramatically reduces the number of trap states (~50 times), improving the device performance substantially. Moreover, the activation energy (~280 meV) of the dominant hole traps remains similar with and without surface passivation.

Improved Efficiency and Stability in 1,5-Diaminonaphthalene Iodide-Passivated 2D/3D Perovskite Solar Cells

Engineering multidimensional two-dimensional/three-dimensional (2D/3D) perovskite interfaces as light harvesters has recently emerged as a potential strategy to obtain a higher photovoltaic performance in perovskite solar cells (PSCs) with enhanced environmental stability. In this study, we utilized the 1,5-diammonium naphthalene iodide (NDAI) bulky organic spacer for interface modification in 3D perovskites for passivating the anionic iodide/uncoordinated Pb2+ vacancies as well as facilitating charge carrier transfer by improving the energy band alignment at the perovskite/HTL interface. Consequently, the NDAI-treated 2D/3D PSCs showed an enhanced open-circuit voltage and fill factor with a remarkable power conversion efficiency (PCE) of 21.48%. In addition, 2D/3D perovskite devices without encapsulation exhibit a 77% retention of their initial output after 1000 h of aging under 50 ± 5% relative humidity. Furthermore, even after 200 h of storage in 85 °C thermal stress, the devices maintain 60% of their initial PCE. The defect passivation and interface modification mechanism were studied in detail by UV vis absorption, photoluminescence spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), solid-state NMR, space-charge-limited current (SCLC) mobility measurement, and impedance spectroscopy. This study provides a promising path for perovskite surface modification in slowing their degradation against external stimuli, providing a future direction for increasing the perovskite device efficiency and durability.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Recent Progress of Layered Perovskite Solar Cells Incorporating Aromatic Spacers

Layered two dimensional (2D) or quasi-2D perovskites are emerging photovoltaic materials due to their superior environment and structure stability in comparison with their 3D counterparts. The typical 2D perovskites can be obtained by cutting 3D perovskites along  < 100 >  orientation by incorporation of bulky organic spacers, which play a key role in the performance of 2D perovskite solar cells (PSCs). Compared with aliphatic spacers, aromatic spacers with high dielectric constant have the potential to decrease the dielectric and quantum confinement effect of 2D perovskites, promote efficient charge transport and reduce the exciton binding energy, all of which are beneficial for the photovoltaic performance of 2D PSCs. In this review, we aim to provide useful guidelines for the design of aromatic spacers for 2D perovskites. We systematically reviewed the recent progress of aromatic spacers used in 2D PSCs. Finally, we propose the possible design strategies for aromatic spacers that may lead to more efficient and stable 2D PSCs.

2D/3D Perovskite Photodetectors with High Response Frequency and Improved Stability Based on Thiophene-2-ethylamine and Dual Additives

Organic-inorganic lead halide perovskite materials have received great attention in recent years. However, the poor stability of these materials severely limits the commercial application of perovskite devices. Here, we used thiophene-2-ethylammonium iodide (TEAI) material as the organic spacer NH₄SCN and NH₄Cl as the dual additives to realize high-stability two-dimensional (2D)/three-dimensional (3D) perovskite thin films for perovskite photodetectors. Then, we investigated different effects of the dual additives on the orientation and crystallinity of the perovskite films. At room temperature, the optimized 2D/3D perovskite photodetectors exhibit good performance with high external quantum efficiency (EQE) (72%), large responsivity (0.36 A/W), high detectivity (2.46 × 10¹² Jones at the bias of 0 V), high response frequency (1.7 MHz), and improved stability (retains 90% photocurrent after 2000 h storage in RT and 10% RH conditions). Based on these devices, a dual-channel optical transport system and a light-intensity adder are achieved. The results of this study indicate that, with a simple process, the TEAI and dual-additives based 2D/3D perovskite photodetectors have promising applications in light-intensity adder and optical communication systems.

Additive Engineering for Stable and Efficient Dion-Jacobson Phase Perovskite Solar Cells

Because of their better chemical stability and fascinating anisotropic characteristics, Dion-Jacobson (DJ)-layered halide perovskites, which owe crystallographic two-dimensional structures, have fascinated growing attention for solar devices. DJ-layered halide perovskites have special structural and photoelectronic features that allow the van der Waals gap to be eliminated or reduced. DJ-layered halide perovskites have improved photophysical characteristics, resulting in improved photovoltaic performance. Nevertheless, owing to the nature of the solution procedure and the fast crystal development of DJ perovskite thin layers, the precursor compositions and processing circumstances can cause a variety of defects to occur. The application of additives can impact DJ perovskite crystallization and film generation, trap passivation in the bulk and/or at the surface, interface structure, and energetic tuning. This study discusses recent developments in additive engineering for DJ multilayer halide perovskite film production. Several additive-assisted bulk and interface optimization methodologies are summarized. Lastly, an overview of research developments in additive engineering in the production of DJ-layered halide perovskite solar cells is offered.

3D printed optical sensor for highly sensitive detection of picric acid using perovskite nanocrystals and mechanism of photo-electron transfer

Hand-held, compact and portable sensors for on-site detection of environmental contaminants are in high demand for industry 4.0. Here, we have developed a sensor based on luminescent organic-inorganic metal halide hybrid perovskites nanocrystals (CH₃NH₃PbBr₃) with p-xylylenediamine as an additional capping agent for highly sensitive and selective detection of picric acid (PA), with a good linear range of 1.8 μM-14.3 μM achieving detection of limit (LOD) of 0.3 μM. The electrostatic interaction between PA and the capping ligand of perovskite nanocrystals resulted in significant fluorescence quenching, as revealed by the steady-state and time-resolved spectroscopy. The applicability of the developed sensor for PA detection was validated with a 3D printed device integrating surface mounting device (SMD) and paper microfluidics. This prototype device was successfully applied as a fluorescence turn-off sensor to detect PA, showing great potential for on-site detection. This 3D-printed paper-based microfluidic optical sensor proved very efficient for naked-eye detection of PA with an inbuilt excitation source, avoiding the requirement of expensive and complex instrumentation.

Highly Efficient and Stable 2D Dion Jacobson/3D Perovskite Heterojunction Solar Cells

Heterostructures involving two-dimensional/three-dimensional (2D/3D) perovskites have recently attracted increased attention due to their ability to combine the high photovoltaic performance of 3D perovskites with the increased stability of 2D perovskites. Here we report ammonium thiocyanate (NH₄SCN) passivated 3D methylammonium lead triiodide (MAPbI₃) perovskite active layer and deposition of 2D perovskite capping layer using xylylene diammonium iodide (XDAI) organic cation. The 2D/3D perovskite heterojunction formation is probed by using FESEM and UPS spectroscopy. The NH₄SCN passivated MAPbI₃ perovskite has shown 19.6% PCE compared to the 17.18% PCE of pristine MAPbI₃ perovskite solar cells (PSCs). Finally, the champion 2D/3D perovskite heterojunction based solar cells have achieved the remarkable PCE of 20.74%. The increased PCE in 2D/3D PSCs is mainly attributed to the reduced defect density and suppressed nonradiative recombination losses. Moreover, the hydrophobic 2D capping layer endows the 2D/3D heterojunction perovskites with exceptional moisture, thermal and UV stability, highlighting the promise of highly stable and efficient 2D/3D PSCs.