Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

As a very prospective solid-state electrolyte, Li10GeP2S12 (LGPS) exhibits high ionic conductivity comparable to liquid electrolytes. However, severe self-decomposition and Li dendrite propagation of LGPS will be triggered due to the thermodynamic incompatibility with Li metal anode. Herein, by adopting a facile chemical vapor deposition method, an artificial solid electrolyte interphase composed of Li2S is proposed as a single ionic conductor to promote the interface stability of LGPS toward Li. The good electronic insulation coupled with ionic conduction property of Li2S effectively blocks electron transfer from Li to LGPS while enabling smooth passage of Li ions. Meanwhile, the generated Li2S layer remains good interface compatibility with LGPS, which is verified by the stable Li-plating/stripping operation for over 500 h at 0.15 mA cm-2. Consequently, the all-solid-state Li-S batteries (ASSLSBs) with a Li2S layer demonstrate superb capacity retention of 90.8% at 0.2 mA cm-2 after 100 cycles. Even at the harsh condition of 90 °C, the cell can deliver a high reversible capacity of 1318.8 mAh g-1 with decent capacity retention of 88.6% after 100 cycles. This approach offers a new insight for interface modification between LGPS and Li and the realization of ASSLSBs with stable cycle life.

Facilely Modified Nickel-Based Hole Transporting Layers for Organic Solar Cells with 19.12% Efficiency and Enhanced Stability

Hole transporting layers (HTLs), strategically positioned between electrode and light absorber, play a pivotal role in shaping charge extraction and transport in organic solar cells (OSCs). However, the commonly used poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) HTL, with its hygroscopic and acidic nature, undermines the operational durability of OSC devices. Herein, an environmentally friendly approach is developed utilizing nickel acetate tetrahydrate (NiAc·4H2O) and [2-(9H-carbazol-9-yl)ethyl] phosphonic acid (2PACz) as the NiAc·4H2O/2PACz HTL, aiming at overcoming the limitations posed by the conventional PEDOT:PSS one. Encouragingly, a remarkable power conversion efficiency (PCE) of 19.12% is obtained for the OSCs employing NiAc·4H2O/2PACz as the HTL, surpassing that of devices with the PEDOT:PSS HTL (17.59%), which is ranked among the highest ones of OSCs. This improvement is attributed to the appropriate work function, enhanced hole mobility, facilitated exciton dissociation efficiency, and lower recombination loss of NiAc·4H2O/2PACz-based devices. Furthermore, the NiAc·4H2O/2PACz-based OSCs exhibit superior operational stability compared to their PEDOT:PSS-based counterparts. Of significant note, the NiAc·4H2O/2PACz HTL demonstrates a broad generality, boosting the PCE of the PM6:PY-IT and PM6:Y6-based OSCs from 16.47% and 16.79% (with PEDOT:PSS-based analogs as HTLs) to 17.36% and 17.57%, respectively. These findings underscore the substantial potential of the NiAc·4H2O/2PACz HTL in advancing OSCs, offering improved performance and stability, thereby opening avenue for highly efficient and reliable solar energy harvesting technologies.

Emerging Trends in Electron Transport Layer Development for Stable and Efficient Perovskite Solar Cells

Perovskite solar cells (PSCs) stand at the forefront of photovoltaic research, with current efficiencies surpassing 26.1%. This review critically examines the role of electron transport materials (ETMs) in enhancing the performance and longevity of PSCs. It presents an integrated overview of recent advancements in ETMs, like TiO2, ZnO, SnO2, fullerenes, non-fullerene polymers, and small molecules. Critical challenges are regulated grain structure, defect passivation techniques, energy level alignment, and interfacial engineering. Furthermore, the review highlights innovative materials that promise to redefine charge transport in PSCs. A detailed comparison of state-of-the-art ETMs elucidates their effectiveness in different perovskite systems. This review endeavors to inform the strategic enhancement and development of n-type electron transport layers (ETLs), delineating a pathway toward the realization of PSCs with superior efficiency and stability for potential commercial deployment.

Record-Efficiency Printable Hole-Conductor-Free Mesoscopic Perovskite Solar Cells Enabled by the Multifunctional Schiff Base Derivative

Tailoring multifunctional additives for performing interfacial modifications, improving crystallization, and passivating defects is instrumental for the fabrication of efficient and stable perovskite solar cells (PSCs). Here, a Schiff base derivative, (chloromethylene) dimethyliminium chloride (CDCl), is introduced as an additive to modify the interface between the mesoporous TiO2 electron transport layer and the MAPbI3 light absorber during the annealing process. CDCl chemically links to TiO2 and MAPbI3 through coordination and hydrogen bonding, respectively, and results in the construction of fast electron extraction channels. CDCl also optimizes the energy-level alignment of the TiO2/MAPbI3 heterojunction and improves the pore-filling and crystallization of MAPbI3 in the mesoscopic scaffold, which inhibits nonradiative recombination and eliminates open-circuit voltage losses. As a result, an impressive power conversion efficiency of 19.74%, which is the best one ever reported, is obtained for printable carbon-based hole-conductor-free PSCs based on MAPbI3.

Morphological Homogeneity and Interface Modification as Determinant Factors of the Efficiency and Stability for Upscaling Organic Solar Cell

Morphological homogeneity and interfacial traps are essential issues to achieve high-efficiency and stable large-area organic solar cells (OSCs). Herein, by the investigation of three quinoxaline-based acceptors, i.e., PM6:Qx-1, PM6:Qx-2, and PM6:Qx-p-4Cl, the performance degradation in up-scaling OSCs is explored. The inhomogeneous morphology in PM6:Qx-2 induces a nonuniform spatial distribution of charge generation, showing a rapid decline in efficiency and stability in large-area OSCs. In comparison, the homogeneous morphology in PM6:Qx-1 and PM6:Qx-p-4Cl alleviates the stability drop. When utilizing 2-phenylethylmercaptan to fill the interfacial traps, the stability drop disappears for PM6:Qx-1 and PM6:Qx-p-4Cl, while it persists for PM6:Qx-2. The PM6:Qx-1 large-are device yields a high efficiency of 13.47% and superior thermal stability (T80 = 2888 h). Consequently, the interface modification dominates the performance degradation of large-area devices with homogeneous morphology, while it cannot eliminate the traps in inhomogeneous film. These results provide a clear understanding of degradation mechanisms in upscaling devices.

Recent Progress of Wide Bandgap Perovskites towards Two-Terminal Perovskite/Silicon Tandem Solar Cells

Perovskite/silicon tandem solar cells have garnered considerable interest due to their potential to surpass the Shockley-Queisser limit of single-junction Si solar cells. The rapidly advanced efficiencies of perovskite/silicon tandem solar cells benefit from the significant improvements in perovskite technology. Beginning with the evolution of wide bandgap perovskite cells towards two-terminal (2T) perovskite/silicon tandem solar cells, this work concentrates on component engineering, additives, and interface modification of wide bandgap perovskite cells. Furthermore, the advancements in 2T perovskite/silicon tandem solar cells are presented, and the influence of the central interconnect layer and the Si cell on the progression of the tandem solar cells is emphasized. Finally, we discuss the challenges and obstacles associated with 2T perovskite/silicon tandem solar cells, conducting a thorough analysis and providing a prospect for their future.

Functional Sulfate Additive-Derived Interfacial Layer for Enhanced Electrochemical Stability of PEO-Based Polymer Electrolytes

Solid-state electrolyte batteries have attracted significant interest as promising next-generation batteries due to their achievable high energy densities and nonflammability. In particular, curable polymer network gel electrolytes exhibit superior ion conductivity and interfacial adhesion with electrodes compared to oxide or sulfide solid electrolytes, bringing them closer to commercialization. However, the limited electrochemical stability of matrix polymers, particularly those based on poly (ethylene oxide) (PEO), presents challenges in achieving stable electrochemical performance in high-voltage lithium metal batteries. Here, these studies report a sulfate additive-incorporated thermally crosslinked gel-type polymer electrolyte (SA-TGPE) composed of a PEO-based polymer matrix and a functional sulfate additive, 1,3-propanediolcyclic sulfate (PCS), which forms stable interfacial layers on electrodes. The electrode-electrolyte interface modified by the PCS enhances the electrochemical stability of the polymer electrolyte, effectively alleviating decomposition of the PEO-based polymer matrix on the cathode. Moreover, it also mitigates side reactions of the Ni-rich NCM cathode and dendrites of lithium metal anode. These studies provide a novel perspective by utilizing interfacial modification through electrolyte additives to resolve the electrochemical instability of PEO-based polymer electrolytes in high-voltage lithium metal batteries.

Improved Efficiency and Stability in 1,5-Diaminonaphthalene Iodide-Passivated 2D/3D Perovskite Solar Cells

Engineering multidimensional two-dimensional/three-dimensional (2D/3D) perovskite interfaces as light harvesters has recently emerged as a potential strategy to obtain a higher photovoltaic performance in perovskite solar cells (PSCs) with enhanced environmental stability. In this study, we utilized the 1,5-diammonium naphthalene iodide (NDAI) bulky organic spacer for interface modification in 3D perovskites for passivating the anionic iodide/uncoordinated Pb2+ vacancies as well as facilitating charge carrier transfer by improving the energy band alignment at the perovskite/HTL interface. Consequently, the NDAI-treated 2D/3D PSCs showed an enhanced open-circuit voltage and fill factor with a remarkable power conversion efficiency (PCE) of 21.48%. In addition, 2D/3D perovskite devices without encapsulation exhibit a 77% retention of their initial output after 1000 h of aging under 50 ± 5% relative humidity. Furthermore, even after 200 h of storage in 85 °C thermal stress, the devices maintain 60% of their initial PCE. The defect passivation and interface modification mechanism were studied in detail by UV vis absorption, photoluminescence spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), solid-state NMR, space-charge-limited current (SCLC) mobility measurement, and impedance spectroscopy. This study provides a promising path for perovskite surface modification in slowing their degradation against external stimuli, providing a future direction for increasing the perovskite device efficiency and durability.

Study on the Construction of Interlayer Adjustable C@MoS2 Fiber Anode by Biomass Confining and its Lithium/Sodium Storage Mechanism

Building a stable and controllable interlayer structure is the key to improving the sodium storage cycling stability and rate performance of two-dimensional anode materials. This study explored the rich functional groups in bacterial cellulose culture medium in the way of biological self-assembly. Mo precursors were used to produce chemical bond in bacterial cellulose culture medium, and intercalation groups are introduced to achieve MoS2 localized nucleation and in situ localized construction of carbon intercalation stable interlaminar structure, thus improving ion transport dynamics and cycle stability. In order to avoid structural irreversibility of MoS2 at low potential, an extended voltage window of 1.5-4 V was selected for lithium/sodium intercalation testing. It was found that there was a significant improvement in sodium storage capacity and stability. During the electrochemical cycling process, in-situ Raman testing revealed that the structure of MoS2 was completely reversible, and the intensity changes of MoS2 characteristic peaks showed in-plane vibration without involving interlayer bonding fracture. Moreover, after the lithium sodium was removed from the intercalation C@MoS2 all structures have good retention.

Interface Modification Using Li-Doped Hollow Titania Nanospheres for High-Performance Planar Perovskite Solar Cells

Titania nanospheres have been utilized as building blocks of electron transporting layers (ETLs) for mesoscopic perovskite solar cells (PSCs). Nevertheless, the power conversion efficiencies (PCEs) reported so far for the mesoscopic PSCs containing titania nanospheres are generally lower than those of the state-of-the-art planar PSCs. Here, we have prepared Li-doped hollow titania nanospheres (Li-HTS) through a "cation-exchange" approach and used them for the first time to modify the SnO2 ETL/perovskite interfaces of planar PSCs. The Li-HTS-modified PSC delivered a PCE of 23.28% with a fill factor (FF) of over 80%, which is significantly higher than the PCE of the control device (20.51%). This is the best PCE achieved for PSCs containing titania nanospheres. Moreover, interfacial modification using Li-HTS greatly improves the stability of the PSCs. This work demonstrates the potential of interface modification using inorganic nanostructures for enhancing the efficiency and stability of planar PSCs.

Robust and Intimate Interface Enabled by Silicon Carbide as an Additive to Anodes for Lithium Metal Solid-State Batteries

Garnet-type solid-state electrolytes are among the most reassuring candidates for the development of solid-state lithium metal batteries (SSLMB) because of their wide electrochemical stability window and chemical feasibility with lithium. However, issues such as poor physical contact with Li metal tend to limit their practical applications. These problems were addressed using β-SiC as an additive to the Li anode, resulting in improved wettability over Li6.75 La3 Zr1.75 Ta0.25 O12 (LLZTO) and establishing an improved interfacial contact. At the Li-SiC|LLZTO interface, intimacy was induced by a lithiophilic Li4 SiO4 phase, whereas robustness was attained through the hard SiC phase. The optimized Li-SiC|LLZTO|Li-SiC symmetric cell displayed a low interfacial impedance of 10 Ω cm2 and superior cycling stability at varying current densities up to 5800 h. Moreover, the modified interface could achieve a high critical current density of 4.6 mA cm-2 at room temperature and cycling stability of 1000 h at 3.5 mA cm-2 . The use of mechanically superior materials such as SiC as additives for the preparation of a composite anode may serve as a new strategy for robust garnet-based SSLMB.

How APTMS Acts as a Bridge to Enhance the Compatibility of the Interface between the Hydrophilic Poly(vinyl alcohol) Film and the Hydrophobic Stearic Acid Coating

The hydrophobic modification of poly(vinyl alcohol) (PVA) film as a biodegradable packaging material has received significant attention in recent research. Despite the use of stearic acid (SA) as a coating for the PVA film, a challenge persists due to the poor compatibility between SA and PVA. This study addressed the aforementioned issue by utilizing (3-aminopropyl)trimethoxysilane (APTMS) as a bridging agent to establish a connection between the hydrophilic PVA film and the hydrophobic SA coating through hydrogen bonding and chemical reactions. First, SEM and EDS analyses confirmed the enhanced interfacial compatibility between the SA coating and the PVA film. Subsequently, the results from 1H NMR, FTIR, and XPS experiments presented evidence of hydrogen bonding and chemical reactions among APTMS, SA, and the PVA film. Interestingly, the PVA-APTMS-SA film demonstrated a contact angle of 120.77°, a water absorption of 7.81%, and a water vapor transmission rate of 8.69 g/m2/h. Furthermore, such a composite film displayed exceptional adhesion performance, requiring detachment stresses of 9.86 ± 0.91 and 6.17 ± 0.75 MPa when tested on glass and marble surfaces, respectively. In conclusion, the PVA-APTMS-SA film exhibited significant potential in extending the freshness of fresh-cut apples, making it a promising eco-friendly packaging material for food preservation.

Efficiency Enhancement of Wide Bandgap Lead Perovskite Solar Cells with PTAA Surface-Passivated with Monomolecular Layer from the Viewpoint of PTAA Band Bending

This report is on the efficiency enhancement of wide bandgap lead halide perovskite solar cells (WBG Pb-PVK PSCs) consisting of FA0.8Cs0.2PbI1.8Br1.2 as the light-harvesting layer. WGB Pb-PVK PSCs have attracted attention as the top layer of all perovskite-tandem solar cells. Poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA), a conductive polymer, is always used as the hole transporting layer (HTL) for Pb-PVK PSCs. Nevertheless, the hydrophobic surface of the PTAA sometimes destroys the growth of the FA0.8Cs0.2PbI1.8Br1.2 film. On the other hand, the Fermi level of PTAA is not well matched with that of perovskite film. Thus, the PCE of the WBG Pb-based PSCs with PTAA as the HTL was not very high. In this report, the efficiency of the FA0.8Cs0.2PbI1.8Br1.2 is improved by passivating the surface of the PTAA with a monomolecular layer, where the surface becomes hydrophilic, and the band bending of the PTAA layer is improved to cause swift hole collection. Finally, WBG Pb-PVK PSCs (1.77 eV) with 16.52% efficiency are reported.

MOF-Assisted Annealing-Free Crystallization Technology of Perovskites toward Efficient and Stable Perovskite Solar Cells

Although annealing is a commonly used crystallization method for perovskite films in perovskite solar cells (PSCs), the high thermal energy consumption and limitations on flexible devices hinder their further industrial application. We herein propose an annealing-free crystallization technology for perovskite films, assisted by the Zr-metal-organic framework (MOF) interface between SnO₂ and the perovskite. It is found that the Zr-MOF interface can accelerate the formation of perovskite intermediates and promote their conversion into perovskite crystals even without annealing. The trap density thus decreases by about one fold, accompanied by significant increases in electron and hole mobilities, resulting in enhanced carrier extraction and suppressed charge recombination. Therefore, the Zr-MOF-based PSC attains a power convention efficiency (PCE) of 20.24%, 2.2 times that (9.26%) of the pristine PSC. Furthermore, the Zr-MOF interface layer can significantly improve the air and thermal stabilities of PSCs. The Zr-MOF-based PSC exhibits 93% of its initial PCE versus 52% for the pristine PSC after 1018 h of storage in air. Additionally, after 360 h of continuous heating at 65 °C, the Zr-MOF-based PSC retains 91% of its initial PCE against 44% for the pristine PSC.

Dual Surface Modifications of NiOx/Perovskite Interface for Enhancement of Device Stability

Various phosphonic acid based self-assembled monolayers (SAMs) have been commonly used for interface modifications in inverted perovskite solar cells. This typically results in significant enhancement of the hole extraction and consequent increase in the power conversion efficiency. However, the surface coverage and packing density of SAM molecules can vary, depending on the chosen SAM material and underlying oxide layer. In addition, different SAM molecules have diverse effects on the interfacial energy level alignment and perovskite film growth, resulting in complex relationships between surface modification, efficiency, and lifetime. Here we show that ethanolamine surface modification combined with [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) results in significant improvement in device stability compared to devices with 2PACz modification only. The significantly smaller size of ethanolamine enables it to fill any gaps in 2PACz coverage and provide improved interfacial defect passivation, while its different chemical structure enables it to provide complementary effects to 2PACz passivation. Consequently, the perovskite films are more stable under illumination (slower photoinduced segregation), and the devices exhibit significant stability enhancement. Despite similar power conversion efficiencies (PCE) between 2PACz only and combined ethanolamine-2PACz modification (PCE of champion devices ∼21.6-22.0% for rigid and ∼20.2-21.0% for flexible devices), the T₈₀ lifetime under simulated solar illumination in ambient is improved more than 15 times for both rigid and flexible devices.

LiAlO2-Modified Li Negative Electrode with Li10GeP2S12 Electrolytes for Stable All-Solid-State Lithium Batteries

Lithium (Li) metal has an ultrahigh specific capacity in theory with an extremely negative potential (versus hydrogen), receiving extensive attention as a negative electrode material in batteries. However, the formation of Li dendrites and unstable interfaces due to the direct Li metal reaction with solid sulfide-based electrolytes hinders the application of lithium metal in all-solid-state batteries. In this work, we report the successful fabrication of a LiAlO₂ interfacial layer on a Li/Li₁₀GeP₂S₁₂ interface through magnetic sputtering. As LiAlO₂ can be a good Li⁺ ion conductor but an electronic insulator, the LiAlO₂ interface layer can effectively suppress Li dendrite growth and the severe interface reaction between Li and Li₁₀GeP₂S₁₂. The Li@LiAlO₂ 200 nm/Li₁₀GeP₂S₁₂/Li@LiAlO₂ 200 nm symmetric cell can remain stable for 3000 h at 0.1 mA cm^-2 under 0.1 mAh cm^-2. Moreover, unlike the rapid capacity decay of a cell with a pristine lithium negative electrode, the Li@LiAlO₂ 200 nm/Li₁₀GeP₂S₁₂/LiCoO₂@LiNbO₃ cell delivers a reversible capacity of 118 mAh g^-1 and a high energy efficiency of 96.6% after 50 cycles. Even at 1.0 C, the cell with the Li@LiAlO₂ 200 nm electrode can retain 95% of its initial capacity after 800 cycles.

Constructing a Superlithiophilic 3D Burr-Microsphere Interface on Garnet for High-Rate and Ultra-Stable Solid-State Li Batteries

Garnet-type solid-state electrolyte (SSE) Li_6.5 La₃ Zr_1.5 Ta_0.5 O₁₂ attracts great interest due to its high ion conductivity and wide electrochemical window. But the huge interfacial resistance, Li dendrite growth, and low critical current density (CCD) block the practical applications. Herein, a superlithiophilic 3D burr-microsphere (BM) interface layer composed of ionic conductor LiF-LaF₃ is constructed in situ to achieve a high-rate and ultra-stable solid-state lithium metal battery. The 3D-BM interface layer with a large specific surface area shows a superlithiophilicity and its contact angle with molten Li is only 7° enabling the facile infiltration of molten Li. The assembled symmetrical cell reaches one of the highest CCD (2.7 mA cm^-2 ) at room temperature, an ultra-low interface impedance of 3 Ω cm² , and a super-long cycling stability of 12 000 h at 0.1-1.5 mA cm^-2 without Li dendrite growth. The solid-state full cells with 3D-BM interface show outstanding cycling stability (LiFePO₄ : 85.4%@900 cycles@1 C; LiNi_0.8 Co_0.1 Mn_0.1 O₂ :89%@200 cycles@0.5 C) and a high rate capacity (LiFePO₄ :135.5mAh g^-1 at 2 C). Moreover, the designed 3D-BM interface is quite stable after 90 days of storage in the air. This study offers a facile strategy to address the critical interface issues and accelerate the practical application of garnet-type SSE in high performance solid-state lithium metal batteries.

Flattening Grain-Boundary Grooves for Perovskite Solar Cells with High Optomechanical Reliability

Optomechanical reliability has emerged as an important criterion for evaluating the performance and commercialization potential of perovskite solar cells (PSCs) due to the mechanical-property mismatch of metal halide perovskites with other device layer. In this work, grain-boundary grooves, a rarely discussed film microstructural characteristic, are found to impart significant effects on the optomechanical reliability of perovskite-substrate heterointerfaces and thus PSC performance. By pre-burying iso-butylammonium chloride additive in the electron-transport layer (ETL), GB grooves (GBGs) are flattened and an optomechanically reliable perovskite heterointerface that resists photothermal fatigue is created. The improved mechanical integrity of the ETL-perovskite heterointerfaces also benefits the charge transport and chemical stability by facilitating carrier injection and reducing moisture or solvent trapping, respectively. Accordingly, high-performance PSCs which exhibit efficiency retentions of 94.8% under 440 h damp heat test (85% RH and 85 °C), and 93.0% under 2000 h continuous light soaking are achieved.

Highly Efficient and Stable 2D/3D Heterojunction Perovskite Solar Cells by In Situ Interface Modification with [(p-Fluorophenyl)ethyl]ammonium Acetate

2D/3D heterojunction perovskites, meaning a rationally prepared 2D capping layer on 3D perovskite films, have been demonstrated as an effective avenue for simultaneously enhancing the efficiency and stability in perovskite solar cells (PSCs). However, the mechanism of the 2D perovskite induced by organic agents is still not extensively studied. Here, we report 2D/3D heterojunction PSCs by in situ fabricating a 2D modified layer on 3D perovskite films with [(p-fluorophenyl)ethyl]ammonium acetate (FPEAAc). During the annealing process, FPEAAc melts and uniformly covers the 3D perovskite films. Then, the excess acetate salt is volatilized, eventually forming a compact 2D perovskite thin layer. On the one hand, the organic agents can effectively rivet onto the 3D perovskite surface, ensuring formation of the necessary 2D perovskites with hydrophobic FPEA⁺ ions. On the other hand, the reaction generates some PbI₂, which passivates the defects on 3D perovskite films and improves the interface contact, significantly enhancing the open-circuit voltage (V_OC) and fill factor (FF) in 2D/3D PSCs. The highest power conversion efficiency of 22.53% is achieved compared with 20.16% in 3D PSCs. The 2D/3D-heterojunction-structured PSCs modified by FPEAAc exhibit high stability, retaining about 90% of the initial device efficiency after 500 h at 85 °C and 40 ± 5% relative humidity. Our research provides a simple method to control the 2D perovskite layer formation and effectively enhance the performance and stability in 2D/3D heterojunction perovskite cells.

Electrospinning Mo-Doped Carbon Nanofibers as an Anode to Simultaneously Boost Bioelectrocatalysis and Extracellular Electron Transfer in Microbial Fuel Cells

The sluggish electron transfer at the interface of microorganisms and an electrode is a bottleneck of increasing the output power density of microbial fuel cells (MFCs). Mo-doped carbon nanofibers (Mo-CNFs) prepared with electrostatic spinning and high-temperature carbonization are used as an anode in MFCs here. Results clearly indicate that Mo₂C nanoparticles uniformly anchored on carbon nanowire, and Mo-doped anodes could accelerate the electron transfer rate. The Mo-CNF ΙΙ anode delivered a maximal power density of 1287.38 mW m^-2, which was twice that of the unmodified CNFs anode. This fantastic improvement mechanism is attributed to the fact that Mo doped on a unique nanofiber surface could enhance microbial colonization, electrocatalytic activity, and large reaction surface areas, which not only enable direct electron transfer, but also promote flavin-like mediated indirect electron transfer. This work provides new insights into the application of electrospinning technology in MFCs and the preparation of anode materials on a large scale.

Perylene Monoimide Phosphorus Salt Interfacial Modified Crystallization for Highly Efficient and Stable Perovskite Solar Cells

Reducing the interfacial defects of perovskite films is key to improving the performance of perovskite solar cells (PSCs). In this study, two kinds of perylene monoimide (PMI) derivative phosphonium bromide salts were designed and used as a multifunctional interface-modified layer in PSCs. These two molecules are inserted between SnO₂ and perovskite to produce a bidirectional passivation effect. The interaction with SnO₂ reduces the oxygen vacancy on the surface of SnO₂ and tunes the energy level of the electron transport layer, making more matches with the perovskite layer. The modified layer can promote the growth of perovskite crystals and reduce the interfacial defects of the perovskite film. Furthermore, the power conversion efficiency (PCE) of PSCs increased from 19.49 to 22.85%, and the open-circuit voltage (V_OC) increased from 1.06 to 1.14 V. At the same time, the PCE of the SnO₂/PMI-TPP-based device remained 88% of the initial PCE after 240 h of continuous illumination. In addition, these two PMI derivatives with a quasi-planar structure can improve the flexibility of flexible PSCs. This study provided a new strategy for the interfacial modification of PSCs and a new insight into the application of flexible PSCs.

Quartz Crystal Microbalance Technology Coupled with Impedance for the Dynamic Monitoring of the Cardiomyocyte Beating Function and Drug Screening

The main sensing techniques used to study myocardial pulsation are electrical impedance sensing (EIS) and by quartz crystal microbalance (QCM). While electrical impedance technology is the gold standard for the study of myocardial pulsation, the clinical application of drugs is being followed up in real time additionally, thus, QCM technology needs to be further developed as a very important class of quality sensor technology. Moreover, the application of EIS, in combination with the QCM, for monitoring myocardial pulsation, has been rarely reported. In this paper, a series of cell growth and adhesion conditions were optimized using rat primary cardiomyocytes, and QCM was used in combination with EIS to monitor the adhesion and the myocardial pulsation ability of the cells in real time. Furthermore, cardiomyocytes that adhered to the QCM and EIS were treated with isoprenaline (ISO), a positive inotropic drug, and verapamil (VRP), a negative inotropic drug. Next, the cell index (CI)-time (T) plots, beating amplitude (BA) and beating rate (BR) of the cardiomyocytes were calculated and changes in these parameters, before and after, dosing were evaluated. The results showed that the QCM technique results were not only consistent with the results obtained with EIS, but also that the QCM technique had a certain degree of sensitivity for the calculation of cardiomyocyte beating. Thus, our findings validate the reliability and validity of the QCM technique for measuring cardiomyocyte beating and drug testing. We hope that further studies would evaluate the application of the QCM technology for clinical use.

Diethanolamine Modified Perovskite-Substrate Interface for Realizing Efficient ESL-Free PSCs

Simplifying device layout, particularly avoiding the complex fabrication steps and multiple high-temperature treatment requirements for electron-selective layers (ESLs) have made ESL-free perovskite solar cells (PSCs) attractive. However, the poor perovskite/substrate interface and inadequate quality of solution-processed perovskite thin films induce inefficient interfacial-charge extraction, limiting the power conversion efficiency (PCEs) of ESL-free PSCs. A highly compact and homogenous perovskite thin film with large grains was formed here by inserting an interfacial monolayer of diethanolamine (DEA) molecules between the perovskite and ITO substrate. In addition, the DEA created a favorable dipole layer at the interface of perovskite and ITO substrate by molecular adsorption, which suppressed charge recombination. Comparatively, PSCs based on DEA-treated ITO substrates delivered PCEs of up to 20.77%, one of the highest among ESL-free PSCs. Additionally, this technique successfully elongates the lifespan of ESL-free PSCs as 80% of the initial PCE was maintained after 550 h under AM 1.5 G irradiation at ambient temperature.

Highly Efficient Flexible Perovskite Solar Cells through Pentylammonium Acetate Modification with Certified Efficiency of 23.35

Among the emerging photovoltaic technologies, rigid perovskite solar cells (PSCs) have made tremendous development owing to their exceptional power conversion efficiency (PCE) of up to 25.7%. However, the record PCE of flexible PSCs (≈22.4%) still lags far behind their rigid counterparts and their mechanical stabilities are also not satisfactory. Herein, through modifying the interface between perovskite and hole transport layer via pentylammonium acetate (PenAAc) molecule a highly efficient and stable flexible inverted PSC is reported. Through synthetic manipulation of anion and cation, it is shown that the PenA⁺ and Ac^- have strong chemical binding with both acceptor and donor defects of surface-terminating ends on perovskite films. The PenAAc-modified flexible PSCs achieve a record PCE of 23.68% (0.08 cm² , certified: 23.35%) with a high open-circuit voltage (V_OC ) of 1.17 V. Large-area devices (1.0 cm² ) also realized an exceptional PCE of 21.52%. Moreover, the fabricated devices show excellent stability under mechanical bending, with PCE remaining above 91% of the original PCE even after 5000 bends.

Effect of Interface Modification on Mechanoluminescence-Inorganic Perovskite Impact Sensors

It is becoming increasingly important to develop innovative self-powered, low-cost, and flexible sensors with the potential for structural health monitoring (SHM) applications. The mechanoluminescence (ML)-perovskite sensor is a potential candidate that combines the light-emitting principles of mechanoluminescence with the light-absorbing properties of perovskite materials. Continuous in-situ SHM with embedded sensors necessitates long-term stability. A highly stable cesium lead bromide photodetector with a carbon-based electrode and a zinc sulfide (ZnS): copper (Cu) ML layer was described in this article. The addition of a magnesium iodide (MgI₂) interfacial modifier layer between the electron transport layer (ETL) and the Perovskite interface improved the sensor's performance. Devices with the modified structure outperformed devices without the addition of MgI₂ in terms of response time and impact-sensing applications.

Performance Enhancement of Perovskite Quantum Dot Light-Emitting Diodes via Management of Hole Injection

Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is widely used in optoelectronic devices due to its excellent hole current conductivity and suitable work function. However, imbalanced carrier injection in the PEDOT:PSS layer impedes obtaining high-performance perovskite light-emitting diodes (PeLEDs). In this work, a novel poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,40-(N-(p-butylphenyl))diphenylamine)] (TFB) is applied as the hole transport layers (HTLs) to facilitate the hole injection with cascade-like energy alignment between PEDOT:PSS and methylammonium lead tribromide (MAPbBr₃) film. Our results indicate that the introduced TFB layer did not affect the surface morphology or lead to any additional surface defects of the perovskite film. Consequently, the optimal PeLEDs with TFB HTLs show a maximum current efficiency and external quantum efficiency (EQE) of 21.26 cd A^-1 and 6.68%, respectively. Such EQE is 2.5 times higher than that of the control devices without TFB layers. This work provides a facile and robust route to optimize the device structure and improve the performance of PeLEDs.

Induction/Inhibition Effect on Lithium Dendrite Growth by a Binary Modification Layer on a Separator

In lithium metal batteries (LMB), unrestricted growth of lithium dendrites will pierce the separator and cause an internal short circuit. Therefore, we designed modified separator with an InN thin layer, which could be in situ converted into a binary mixed-modified layer of Li-In alloy and Li₃N during the lithium plating/stripping process. Among them, Li-In alloy induces the lateral growth of lithium dendrites and prevents the separator from being pierced; Li₃N balances ion distribution at the lithium anode/separator interface, which is beneficial to inhibit the growth of lithium dendrites. Under the synergistic effect of the two phases, the performance of LMBs was obviously improved. In addition, the separator modification does not need to be carried out in a protective atmosphere and is suitable for large-scale roll-to-roll processing.

Suppressing the Exacerbated Hydrogen Evolution of Porous Zn Anode with an Artificial Solid-Electrolyte Interphase Layer

Rechargeable Zn batteries are widely studied as aqueous, safe, and environmentally friendly alternatives to Li-ion batteries. The 3D porous Zn anode has been extensively reported for suppressing Zn dendrite growth and accelerating the electrode kinetics. However, we demonstrate herein that the undesirable hydrogen evolution reaction (HER) is also exacerbated for porous Zn electrode. Therefore, a polytetrafluoroethylene (PTFE) coating is further applied on the porous Zn serving as the artificial solid-electrolyte interphase (SEI), which is demonstrated to effectively inhibit the hydrogen evolution and maintain the Zn plating kinetics. By utilizing the synergistic effects of the porous morphology and artificial SEI layer, better performances are obtained over porous Zn or bare Zn foil, including dendrite-free Zn plating/stripping up to 2000 h at 2 mA cm^-2 and extended cycling in the Zn||V₂O₅ cell. This work suggests two complementary strategies for achieving simultaneously dendrite-free and side-reaction-suppressed Zn batteries.

Limited Lithium Loading Promises Improved Lithium-Metal Anodes in Interface-Modified 3D Matrixes

Confining Li metal in a three-dimensional (3D) matrix has been proven effective in improving the Li-metal anodes; however, in most studies, the loading of Li in the 3D matrix is far excessive, resulting in a dense bulk Li-metal anode with a low Li-utilization rate, forfeiting the effect of the 3D matrix. Here, we show that limiting the loading of Li metal within an interface-modified 3D carbon matrix not only increases the Li-utilization rate but also improves the electrochemical performance of the Li-metal anode. We use lithiophilic Fe₂O₃ granules anchored on a 3D carbon fiber scaffold to guide molten Li dispersion onto the fibers with controlled Li loading. Limiting Li loading maximizes the interface lithiophilic effect of the Fe₂O₃ granules while preserving sufficient space for electrolyte infusion, collectively ensuring uniform Li deposition and fast Li⁺ transport kinetics. The Li anode with limited Li dosage achieves remarkably improved Li-anode performances, including long lifespan, low voltage polarization, and low electrochemical resistance in both the symmetric cells and full cells. The improved electrochemical performance of the limited Li anode substantiates the importance to reduce Li loading from a fresh perspective and provides an avenue for building practical Li-metal batteries.

Superbase and Hydrophobic Ionic Liquid Confined within Ni Foams as a Free-Standing Catalyst for CO2 Electroreduction

Access to high-performance and cost-effective catalyst materials is one of the crucial preconditions for the industrial application of electrochemical CO₂ reduction (ECR). In this work, a facile and simple strategy is proposed for the construction of a free-standing electrocatalyst via confining a superbase and hydrophobic ionic liquid (IL, [P₆₆₆₁₄][triz]) into Ni foam pores, denoted as [P₆₆₆₁₄][triz]@Ni foam. These ILs can modulate the surface of Ni foam and create a microenvironment with high CO₂ concentration around the electrode/electrolyte interface, which successfully suppresses the hydrogen evolution reaction (HER) of Ni foam. Consequently, the synthesized [P₆₆₆₁₄][triz]@Ni foam sample can obtain a CO product with 63% Faradaic efficiency from the ECR procedure, while no detectable CO can be found on pristine Ni foam. Owing to the superbase IL, the valency of Ni species retains Ni(I)/Ni(0) during electrolysis. Furthermore, the strikingly high CO₂ capacity by [P₆₆₆₁₄][Triz] (0.91 mol CO₂ per mole of IL) offers a high CO₂ local concentration in the reaction region. Theoretical calculations indicated that the neutral CO₂ molecule turned to be negatively charged with -0.546 e and changed into a bent geometry, thus rendering CO₂ activation and reduction in a low-energy pathway. This study provides a new method of electrode interface modification for the design of efficient ECR catalysts.

Interface Molecular Functionalization of Cu2O for Synchronous Electrocatalytic Generation of Formate

The electrocatalytic generation of valuable fuels and chemicals from carbon dioxide (CO₂) and others with the assistance of clean solar energy is a highly promising way to realize the carbon-neutral cycle, which invokes the systematic development of advanced electrocatalysts for efficient and selective redox reactions of feedstocks. Herein, we demonstrate the interface modification of cuprous oxide with polyvinylpyrrolidone (PVP) to improve the electrocatalytic efficiency for the synchronous formate generation. Density functional theory calculations reveal that the interfacial properties can be effectively regulated by the PVP functionalization for the favorable formation of intermediates to improve the selectivity of formate generation. Importantly, the advanced electrocatalyts enable an efficient coupling of CO₂ reduction with methanol oxidation in an electrochemical cell powered with a solar cell. The work provides a predictive link between the electrocatalytic redox reactions by applying the interfacial regulation strategies of electrocatalysts.

Construction of a LiF-Rich and Stable SEI Film by Designing a Binary, Ion-, and Electron-Conducting Buffer Interface on the Si Surface

Stabilizing a solid electrolyte interface (SEI) film on the Si surface is a prerequisite for realizing silicon (Si) anode applications. Interfacial engineering is one of the effective strategies to construct stable SEI films on Si surfaces and improve the electrochemical performance of the Si anodes. This work develops a silver (Ag)-decorated mucic acid (MA) buffer interface on the Si surface and the obtained Si@MA*Ag anode retains 1567 mAh g^-1 after 500 cycles at 2.1 A g^-1 and exhibits 1740 mAh g^-1 at 126 A g^-1, which are significantly higher than those of the bare Si anode of 247 and 145 mAh g^-1 under the same conditions, respectively. Analysis indicates that the improved electrochemical performance is because of the depressed volume effect of the Si particles and the sustained integrity of the electrode laminate during cycling, the enhanced lithium diffusion on the Si surface, and the improved electronic conductivity of the Si anode, as well as the facilitated formation of inorganic components in the SEI film.

Fabrication of high-performance carbon nanotube/copper composite fibers by interface thiol-modification

Carbon nanotube (CNT)/copper (Cu) composite fibers are placed great expectations as the next generation of light-weight, conductive wires. However, the electrical and mechanical performances still need to be enhanced. Herein, we demonstrate a strategy that is electrodeposition Cu on thiolated CNT fibers to solve the grand challenge which is enhancing the performance of CNT/Cu composite fibers. Thiol groups are introduced to the surface of the CNT fibers through a controllable O₂plasma carboxylation process and amide reaction. Compared with CNT/Cu composite fibers, there are 82.7% and 29.6% improvements in electrical conductivity and tensile strength of interface thiol-modification composite fibers. The enhancement mechanism is also explored that thiolated CNT fibers could make strong interactions between Cu and CNT, enhancing the electrical and mechanical performance of CNT/Cu composites. This work proposes a convenient, heat-treatment-free strategy for high-performance CNT/Cu composite fibers, which can be manufactured for large-scale production and applied to next-generation conductive wires.

Simultaneous Enhancement in Visible Transparency and Electrical Conductivity via the Physicochemical Alterations of Ultrathin-Silver-Film-Based Transparent Electrodes

A methodology for the simultaneous modulation of the chemical and physical states of an amorphous TiO_x layer surface and its impact on the subsequent deposition of a polycrystalline Ag layer are presented. The smoothened TiO_x layer surface comprising chemically altered, oxygen-deficient states serves as a nucleating platform for Ag deposition, facilitating a marked increase (∼75%) in the nucleation number density, which strongly enhances the wettability of ultrathin Ag layers. The physically smoothened TiO_x/Ag interface further reduces the optical and electrical losses. When the proposed methodology is applied to TiO_x/Ag/ZnO transparent conductive electrodes (TCEs), exceptional TCE properties are yielded owing to the simultaneous improvement in visible transparency and electrical conductivity; specifically, a record-high 0.22 Ω^-1 Haacke figure of merit is realized. TCEs are prepared on flexible substrates to verify their applicability as stand-alone flexible transparent heaters and as integrated heaters within electrochromic devices to enhance color-switching reactions.

Construction of Charge Transport Channels at the NiOx/Perovskite Interface through Moderate Dipoles toward Highly Efficient Inverted Solar Cells

NiO_x-based perovskite solar cells (PSCs) have attracted much attention because of their low fabrication temperature, suppressed hysteresis, and superior stability. However, the poor interfacial contacts between NiO_x and perovskite layers always limit the progress of PSCs. Here, we applied 2-thiophenemethylamine (TPMA) as charge transport channels at the interface between NiO_x and perovskite layers. The introduction of TPMA provides moderate dipole moment pointing to the perovskite side and effectively promotes the charge transportation. Meanwhile, TPMA anchorage also passivates the defect states at the surfaces of both NiO_x and MAPbI₃, which compensates the voltage loss due to the change in NiO_x work function induced by the dipole. Thus, the device performance has been significantly enhanced in both electrochemical properties and power conversion efficiency. Our work has demonstrated a new way of improving current and voltage in the NiO_x-based PSCs simultaneously through a moderate interfacial dipole moment toward highly efficient PSCs.

Highly Reversible and Anticorrosive Zn Anode Enabled by a Ag Nanowires Layer

With the fast development of large-scale energy storage, aqueous Zn-based rechargeable batteries have attracted more and more attention because of their high-level safety, low cost, and environmental friendliness. The Zn metal anode is fascinating for aqueous Zn-based rechargeable batteries due to its high volume-specific capacity (5855 mA h cm^-3), low negative potential (-0.762 V vs standard hydrogen electrode), and abundant resources. However, the practical application of the Zn metal anode is hindered by the challenge of serious dendrite growth. To address this, herein, we report a highly reversible and anticorrosive Zn anode enabled by a Ag nanowires (AgNWs) layer. By effectively lowering the nucleation overpotential and providing a high specific surface area to construct abundant sites inducing Zn uniform deposition, the designed Zn-AgNWs anode could ensure dendrite-free deposition to improve the reversibility (600 h at 2 mA h cm^-2). During cycling, Zn deposition on the AgNWs surface drives the in situ formation of the AgZn₃ alloy to constitute a natural protective layer, which can prevent the direct corrosion reaction between Zn and the electrolyte. Thus, the Zn-AgNWs|MnO₂ full cell exhibits excellent electrochemical performance with large specific capacity and outstanding rate capability and retains a high capacity retention at 0.6 A g^-1 even after 800 cycles.

Ligand Exchange Strategy to Achieve Chiral Perovskite Nanocrystals with a High Photoluminescence Quantum Yield and Regulation of the Chiroptical Property

Chiral nanomaterials have drawn extensive attention on account of numerous application prospects in optoelectronics, asymmetric catalysis, chiral recognition, and three-dimensional (3D) display. Thereinto, chiral perovskite has been a hotspot due to brilliant optoelectronic properties, but some problems limit the development, including low quantum yield, low chiral intensity, and the lack of facile regulation. To overcome these issues, an effective ligand exchange strategy, i.e. the interface modification has been proposed for chiral perovskite nanocrystals (PNCs). With the surface modification of CsPbBr₃ PNCs with chiral organic ammonium in methyl acetate in the typical purification process, excellent circular dichroism (CD) signals were obtained and defects were eliminated, leading to an increase in the photoluminescence quantum yield (PLQY) from 50% to nearly 100%. The CD signal can be regulated through a ligand exchange strategy in the longitudinal dimension, the chiral intensity, and the transverse dimension, the wavelength range. Here, the proper addition of R-α-PEAI into the R-α-PEABr-capped CsPbBr₃ PNCs can produce a superstrong CD signal with the highest anisotropy factor (g-factor) of 0.0026 in the visible region among reported chiral colloidal PNCs. Simultaneously, the luminescence emission can be tuned from the green to red region with boosted PLQY through the approach. The density functional theory (DFT) calculation result supports that chirality comes from the hybridization between the energy level of a perovskite structure and that of chiral organic molecules. These properties can be used in the structural engineering of high-performance chiral optical materials, spin-polarized light-emitting devices, and polarized optoelectronic devices.

Interface Modification and Halide Substitution To Achieve High Ionic Conductivity in LiBH4-Based Electrolytes for all-Solid-State Batteries

A fast solid-state Li-ion conductor Li₁₆(BH₄)₁₃I₃@g-C₃N₄ was synthesized using a simple ball-milling process. Because of the combined effect of halide substitution and the formation of an interface between Li₁₆(BH₄)₁₃I₃ and g-C₃N₄, Li₁₆(BH₄)₁₃I₃@g-C₃N₄ delivers a high ionic conductivity of 3.15 × 10^-4 S/cm at 30 °C, which is about 1-2 orders of magnitude higher than that of Li₁₆(BH₄)₁₃I₃. Additionally, Li₁₆(BH₄)₁₃I₃@g-C₃N₄ exhibits good electrochemical stability at a wide potential window of 0-5.0 V (vs Li/Li⁺) and excellent thermal stability. The Li/Li symmetrical cell based on the Li₁₆(BH₄)₁₃I₃@g-C₃N₄ electrolyte achieves long-term cycling with a small increase in overpotential, confirming superior electrochemical stability against Li foil. More importantly, Li₁₆(BH₄)₁₃I₃@g-C₃N₄-based Li batteries are compatible with S-C and FeF₃ cathodes and MgH₂ anodes and can achieve long-term cycling with Li₄Ti₅O₁₂ anodes at a temperature range from 30 to 60 °C. The developed strategy of coupling halide substitution together with interface modifications may open a new avenue toward the development of LiBH₄-based high ionic conductivity electrolytes for room-temperature all-solid-state Li batteries.

Optimization of a SnO2-Based Electron Transport Layer Using Zirconium Acetylacetonate for Efficient and Stable Perovskite Solar Cells

SnO₂ is a promising material for use as an electron transfer layer (ETL) in perovskite photovoltaic devices due to its suitable energy level alignment with the perovskite, high electron mobility, excellent optical transmission, and low-temperature processability. The development of high-quality SnO₂ ETLs with a large coverage and that are pinhole-free is crucial to enhancing the performance and stability of the perovskite solar cells (PSCs). In this work, zirconium acetylacetonate (ZrAcac) was introduced to form a double-layered ETL, in which an ideal cascade energy level alignment is obtained. The surface of the resulting ZrAcac/SnO₂ (Zr-SnO₂) layer is compact and smooth and had a high coverage of SnO₂, which enhances the electron extractability, improves ion blocking, and reduces the charge accumulation at the interface. As a result, the fill factor (FF, 80.99%), power conversion efficiency (PCE, 22.44%), and stability of the Zr-SnO₂ device have been significantly improved compared to PSCs with only a SnO₂ ETL. In addition, the PCE of the Zr-SnO₂ device is maintained at more than 80% of the initial efficiency after 500 h of continuous illumination.

CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells

Organic-inorganic halide perovskite solar cells (PSCs) have drawn tremendous attention owing to their remarkable photovoltaic performance and simple preparation process. However, conventional wet-chemical synthesis methods inevitably create defects both in the bulk and at the interfaces of perovskites, leading to recombination of charge carriers and reduced stability. Herein, a bilateral interface modification to perovskites by doping room-temperature synthesized CsPbBr3 nanocrystals (CN) is reported. The ultrafast transient absorption measurement reveals that CN effectively suppresses the defect at the SnO2 /perovskite interface and boosts the interfacial electron transport. Meanwhile, the in situ Kelvin probe force microscopy and contact potential difference characterizations verify that the CN within the upper part of the perovskites enhances the built-in electric field, facilitating oriented migration of the carriers within the perovskite. Combining the superiorities of CN modifiers on both sides, the bilaterally modified CH3 NH3 PbI3 -based planar PSCs exhibit optimal power conversion efficiency exceeding 20% and improved device stability.

Enhanced Thermoelectric Performance of SnTe-Based Materials via Interface Engineering

Interface engineering has been regarded as an effective strategy to improve thermoelectric (TE) performance by modulating electrical transport and enhancing phonon scattering. Herein, we develop a new interface engineering strategy in SnTe-based TE materials. We first use a one-step solvothermal method to synthesize SnTe powders decorated by Sb₂Te₃ nanoplates. After subsequent spark plasma sintering, we found that an ion-exchange reaction between the Sb₂Te₃ and SnTe matrixes happens to result in Sb doping and the formation of SnSb nanoparticles and the recrystallization of the nanograined SnTe at the grain boundaries of the SnTe matrix. Benefitting from this unique engineering, a significantly reduced lattice thermal conductivity of ∼0.64 W m^-1 K^-1 and a high zT of ∼1.08 (∼100% enhanced) at 873 K are achieved in SnTe-Sb_0.06. Such improved TE properties are attributed to the optimized carrier concentration and valence band convergence due to the Sb doping and enhanced phonon scattering by interface engineering at the grain boundaries. This work has demonstrated a facile and effective method to realize high-TE-performance SnTe via interface engineering.

Boosting the Performance of Self-Powered CsPbCl3-Based UV Photodetectors by a Sequential Vapor-Deposition Strategy and Heterojunction Engineering

All-inorganic CsPbCl₃ perovskite in ultraviolet (UV) detection is drawing increasing interest owing to its UV-matchable optical band gap, ultrahigh UV stability, and superior inherent optoelectronic properties. Almost all of the reported CsPbCl₃ photodetectors employ CsPbCl₃ nano- or microstructures as sensitive components, while CsPbCl₃ polycrystalline film-based self-powered photodetectors are rarely studied on account of the terrible precursor solubility. Herein, a novel sequential vapor-deposition technique is demonstrated to fabricate CsPbCl₃ polycrystalline film for the first time. High-quality CsPbCl₃ films with excellent optical, electronic, and morphological features are obtained. A self-powered photodetector based on the CsPbCl₃ film is constructed without any charge transport layer, showing a high UV detection performance. A thin p-type PbS buffer layer is further introduced to passivate the surface defects of the CsPbCl₃ layer and decrease the interfacial energy barrier by forming a type-II heterojunction, contributing to a faster hole extraction rate and a suppressed dark current level. The best-performing device achieves an ultrafast response time of 1.92 μs, an ultrahigh on/off ratio of 2.22 × 10⁵, and a responsivity of 0.22 A/W upon 375 nm UV illumination at 0 V bias. This comprehensive performance is the best among all of the CsPbCl₃ photodetectors reported to date. The as-prepared photodetectors also present an eminent UV irradiation and long-term durability in ambient air. Furthermore, a large-area and uniform 625-pixel UV image sensor is fabricated and attains a prominent imaging capability. Our work opens a new avenue for the scalable production of CsPbCl₃-based optoelectronics.

Interfacial and Permeating Modification Effect of n-type Non-fullerene Acceptors toward High-Performance Perovskite Solar Cells

Interface passivation in the electron transport layer (ETL) has emerged as a very important and challenging topic for the improvement of stability and efficiency of perovskite solar cells (PSCs). Here, we introduce the n-type small organic molecule Y6 that acts as an effective ETL modifier through surface engineering. As a result, the simple PCBM + Y6 ETL led to significantly stronger light absorption, higher electron extraction ability and transportability, and reduced recombination loss in regular MAPbI₃ PSCs. The power conversion efficiency can be significantly increased from 17.39 to 20.02% in inverted p-i-n MAPbI₃ PSCs without additional alternation, with an increment of over 15%, along with higher open-circuit voltage and short-circuit current. What is more, the devices with the Y6-modified ETL also exhibited better long-term stability compared to the control devices. This indicates the feasibility of enhancing absorption over a wider light spectrum in a single-junction cell and gaining a comprehensive understanding of interface engineering between the ETL and perovskite layer.

Improving the Photovoltaic Performance of Flexible Solar Cells with Semitransparent Inorganic Perovskite Active Layers by Interface Engineering

Inorganic perovskite CsPbBr₃ has broad application prospects in photovoltaic windows, tandem cells, and other fields due to its intrinsic semitransparency, excellent photoelectric properties, and stability. In this work, a high-quality semitransparent CsPbBr₃ film was prepared by a sequential vacuum evaporation deposition method without high-temperature annealing and successfully used as the active layer of flexible perovskite solar cells (F-PSCs) for the first time, achieving a power conversion efficiency (PCE) of 5.00%. By introducing an energy-level buffer layer of Cu₂O between CsPbBr₃ and Spiro-OMeTAD, the champion PCE has been further improved to 5.67% owing to the reduction of electron-hole recombination and enhanced charge extraction. The optimized devices present higher stability, which can maintain more than 95% of the initial efficiency even after continuous heating at 85 °C for 240 h. Moreover, the F-PSCs also exhibit excellent mechanical durability, and 90% of the original PCE can be retained after 1000 bending cycles at a curvature radius of 3 mm.

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells

Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid-base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm², a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.

Compositional and Interfacial Engineering Yield High-Performance and Stable p-i-n Perovskite Solar Cells and Mini-Modules

Through the optimization of the perovskite precursor composition and interfaces to selective contacts, we achieved a p-i-n-type perovskite solar cell (PSC) with a 22.3% power conversion efficiency (PCE). This is a new performance record for a PSC with an absorber bandgap of 1.63 eV. We demonstrate that the high device performance originates from a synergy between (1) an improved perovskite absorber quality when introducing formamidinium chloride (FACl) as an additive in the "triple cation" Cs_0.05FA_0.79MA_0.16PbBr_0.51I_2.49 (Cs-MAFA) perovskite precursor ink, (2) an increased open-circuit voltage, V_OC, due to reduced recombination losses when using a lithium fluoride (LiF) interfacial buffer layer, and (3) high-quality hole-selective contacts with a self-assembled monolayer (SAM) of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) on ITO electrodes. While all devices exhibit a high performance after fabrication, as determined from current-density voltage, J-V, measurements, substantial differences in device performance become apparent when considering longer-term stability data. A reduced long-term stability of devices with the introduction of a LiF interlayer is compensated for by using FACl as an additive in the metal-halide perovskite thin-film deposition. Optimized devices maintained about 80% of the initial average PCE during maximum power point (MPP) tracking for >700 h. We scaled the optimized device architecture to larger areas and achieved fully laser patterned series-interconnected mini-modules with a PCE of 19.4% for a 2.2 cm² active area. A robust device architecture and reproducible deposition methods are fundamental for high performance and stable large-area single junction and tandem modules based on PSCs.

Synchronous Interface Modification and Bulk Passivation via a One-Step Cesium Bromide Diffusion Process for Highly Efficient Perovskite Solar Cells

Perovskite film modification is one of the most effective methods to improve the performance of perovskite solar cells. The modification should follow its characters of an asymmetric structure and the corresponding charge transportation and extraction. In this work, it is shown that synchronous interface modification and bulk passivation for highly efficient PSCs can be achieved by a one-step cesium bromide (CsBr) diffusion process because it is more suitable for an asymmetric structure. The synchronous interface modification and bulk asymmetric passivation can be better applied to the asymmetric PSC structure and can boost the power conversion efficiency apparently from 19.5 to 22.1%. It is shown that the perovskite crystallization is improved and the charge extraction is also enhanced obviously due to the better band alignment matching. The diffusion of CsBr into the perovskite bulk could form a gradient distribution, which is more applicable to the asymmetric charge transport and extraction. Thus, the CsBr at the interface between the electronic transport layer (ETL) and perovskite, as well as in the perovskite bulk, could suppress charge recombination. All of these factors can improve the J_SC and V_OC as well as the power conversion efficiency (PCE) of the PSCs. The results point out that the studied method is a simple and efficient way to fabricate high-performance PSCs by interface modification and bulk asymmetric passivation in a single step.

Postpassivation of Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 Perovskite Films with Tris(pentafluorophenyl)borane

Passivating defects to suppress recombination is a valid tactic to improve the performance of third-generation perovskite-based solar cells. Pb⁰ is the primary defect in Pb-based perovskites. Here, tris(pentafluorophenyl)borane is inserted between the perovskite and spiro-OMeTAD layer in SnO₂-based planar perovskite solar cells. The incorporation of tris(pentafluorophenyl)borane can effectively passivate Pb⁰ defects, decreasing recombination at the surface of the perovskite film. Additionally, the modification with tris(pentafluorophenyl)borane decreases the grain boundaries quantity in the perovskite film, enhancing the transportation capability of carriers. The resulting perovskite solar cell gets a high efficiency of 21.42%. While the reference device without tris(pentafluorophenyl)borane treatment acquires an efficiency of 19.07%. More importantly, the stability tests manifest that incorporating tris(pentafluorophenyl)borane in perovskite solar cells is conducive to the stability of the device.

Copper Thiocyanate as an Anode Interfacial Layer for Efficient Near-Infrared Organic Photodetector

Interfacial modification between the electrode and the overlying organic layer has significant effects on the charge injection and collection and thus the device performance of organic photodetectors. Here, we used copper(I) thiocyanate (CuSCN) as the anode interfacial layer for organic photodetector, which was inserted between the anode and an organic light-sensitive layer. The CuSCN layer processed with ethyl sulfide solution presented similar optical properties to the extensively used anode interlayer of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), while the relatively shallow conduction band of CuSCN resulted in a much higher electron-injection barrier from the anode and shunt resistance than those of PEDOT:PSS. Moreover, the CuSCN-based device also exhibited an increased depletion width for the PEDOT:PSS-based device, as indicated by the Mott-Schottky analysis. These features lead to the dramatically reduced dark current density of 2.7 × 10^-10 A cm^-2 and an impressively high specific detectivity of 4.4 × 10¹³ cm Hz^1/2 W^-1 under -0.1 V bias and a working wavelength of 870 nm. These findings demonstrated the great potential of using CuSCN as an anode interfacial layer for developing high-performance near-infrared organic photodetectors.

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FA_xMA_1-xPbI_nBr_3-n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50-65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.