Non-Fullerene Acceptors Assisted Target Therapy for Interface Treatment Enable High Performance Inverted Perovskite Solar Cells

Targeted treatment of the interface between electron transport layers (ETL) and perovskite layers is highly desirable for achieving passivating effects and suppressing carrier nonradiative recombination, leading to high performance and long-term stability in perovskite solar cells (PSCs). In this study, a series of non-fullerene acceptors (NFAs, Y-H, Y-F, and Y-Cl) are introduced to optimize the properties of the perovskite/ETL interface. This optimization involves passivating Pb2+ defects, releasing stress, and modulating carrier dynamics through interactions with the perovskite. Remarkably, after modifying with NFAs, the absorption range of perovskite films into the near-infrared region is extended. As expected, Y-F, with the largest electrostatic potential, facilitates the strongest interaction between the perovskite and its functional groups. Consequently, champion power conversion efficiencies of 21.17%, 22.21%, 23.25%, and 22.31% are achieved for control, Y-H-, Y-F-, and Y-Cl-based FA0.88 Cs0.12 PbI2.64 Br0.36 (FACs) devices, respectively. This treatment also enhances the heat stability and air stability of the corresponding devices. Additionally, these modifier layers are applied to enhance the efficiency of Cs0.05 (FA0.95 MA0.05 )0.95 PbI2.64 Br0.36 (FAMA) devices. Notably, a champion PCE exceeding 24% is achieved in the Y-F-based FAMA device. Therefore, this study provides a facile and effective approach to target the interface, thereby improving the efficiency and stability of PSCs.

Multifunctional Imidazolidinyl Urea Additive Initiated Complex with PbI2 Toward Efficient and Stable Perovskite Solar Cells

High-quality perovskite absorption layer is the fundamental basis for efficient and stable perovskite solar cells (PSCs). Due to the ionic nature of perovskite components, plentiful charged defects and suspension bonds remain on the surface of perovskite grains after continuous high-temperature annealing. Here, the complex initiated by the introduction of a multifunctional imidazolidinyl urea (IU) additive into the PbI2 precursor solution could serve as nucleation sites and crystallization templates for perovskite crystals to optimize the growth of high-quality perovskite films. By anchoring at the grain boundaries of perovskite films, IU molecules could passivate various types of defects, improve the hydrophobic properties, and inhibit lead leakage. Attributed to reduced defect density, improved charge transport, and inhibited α-FAPbI3 transition, the PSCs prepared based on IU additives achieved a champion power conversion efficiency of 23.18% (21.51% for the control PSCs) with negligible hysteresis and satisfactory stability.

A simple strategy to obtain graphitic carbon nitride modified TiO2layer for efficient perovskite solar cells

The power conversion efficiency (PCE) of perovskite solar cells (PSCs) can be improved through the concurrent strategies of enhancing charge transfer and passivating defects. Graphite carbon nitride (g-C3N4) has been demonstrated as a promising modifier for optimizing energy level alignment and reducing defect density in PSCs. However, its preparation process can be complicated. A simple one-step calcination approach was used in this study to prepare g-C3N4-modified TiO2via the incorporation of urea into the TiO2precursor. This modification simultaneously tunes the energy level alignment and passivates interface defects. The comprehensive research confirms that the addition of moderate amounts of g-C3N4to TiO2results in an ideal alignment of energy levels with perovskite, thereby enhancing the ability to separate and transfer charges. Additionally, the g-C3N4-modified perovskite films exhibit an increase in grain size and crystallinity, which reduces intrinsic defects density and extends charge recombination time. Therefore, the g-C3N4-modified PSC achieves a champion PCE of 20.00%, higher than that of the control PSC (17.15%). Our study provides a systematic comprehension of the interfacial engineering strategy and offers new insights into the development of high-performance PSCs.

Benzophenone: A Small Molecule Additive for Enhanced Performance and Stability of Inverted Perovskite Solar Cells

In this study, we investigated the impact of benzophenone (BP), a small molecule additive, on the performance and stability of inverted perovskite solar cells (PSCs). Specifically, we introduced BP into the perovskite precursor solution of FAPbI3 to fabricate PSCs with an ITO/PEDOT:PSS/BP:FAPbI3/PCBM/C60/PCB/Ag architecture. The incorporation of BP with an optimum concentration of 2 mg mL-1 significantly enhanced the power conversion efficiency (PCE) of the inverted PSC from 13.12 to 18.84% with negligible hysteresis. Notably, the BP-based PSCs retained ∼90% of their initial PCE after being stored in ambient air with 30% relative humidity at 25 °C for 700 h. In contrast, control devices showed rapid degradation, retaining only 30% of their initial value within 300 h under the same conditions. We attributed the superior performance and stability of the BP-based PSCs to the grain boundary passivation of the perovskite film. The improvement was mainly attributed to the intermolecular interaction between the O-donor Lewis base BP material and both Pb2+ and FA+ in FAPbI3. This effectively suppresses trap-assisted recombination and promotes the conversion of the δ-phase to photoactive and stable α-phase FAPbI3. Overall, our findings suggest that BP is a promising additive for improving the performance and stability of inverted PSCs.

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Antimony selenide (Sb₂Se₃) is emerging as a promising photovoltaic material owing to its excellent photoelectric property. However, the low carrier transport efficiency, and detrimental surface oxidation of the Sb₂Se₃ thin film greatly influenced the further improvement of the device efficiency. In this study, the introduction of tellurium (Te) can induce the benign growth orientation and the desirable Sb/Se atomic ratio in the Te-Sb₂Se₃ thin film. Under various characterizations, it found that the Te-doping tended to form Sb₂Te₃-doped Sb₂Se₃, instead of alloy-type Sb₂(Se,Te)₃. After Te doping, the mitigation of surface oxidation has been confirmed by the Raman spectra. High-quality Te-Sb₂Se₃ thin films with preferred [hk1] orientation, large grain size, and low defect density can be successfully prepared. Consequently, a 7.61% efficiency Sb₂Se₃ solar cell has been achieved with a V_OC of 474 mV, a J_SC of 25.88 mA/cm², and an FF of 64.09%. This work can provide an effective strategy for optimizing the physical properties of the Sb₂Se₃ absorber, and therefore the further efficiency improvement of the Sb₂Se₃ solar cells.

Promoting Energy Transfer Between Quasi-2D Perovskite Layers Toward Highly Efficient Red Light-Emitting Diodes

Although tremendous progress has recently been made in quasi-2D perovskite light-emitting diodes (PeLEDs), the performance of red PeLEDs emitting at ≈650-660 nm, which have wide prospects for application in photodynamic therapy, is still limited by an inefficient energy transfer process between the quasi-2D perovskite layers. Herein, a symmetric molecule of 3,3'-(9H-fluorene-9,9-diyl)dipropanamide (FDPA) is designed and developed with two functional acylamino groups and incorporated into the quasi-2D perovskites as the additive for achieving high-performance red PeLEDs. It is demonstrated that the agent can simultaneously diminish the van der Waals gaps between individual perovskite layers and passivate uncoordinated Pb²⁺ related defects at the surface and grain boundaries of the quasi-2D perovskites, which truly results in an efficient energy transfer in the quasi-2D perovskite films. Consequently, the red PeLEDs emitting at 653 nm with a peak external quantum efficiency of 18.5% and a maximum luminance of 2545 cd m^-2 are achieved, which is among the best performing red quasi-2D PeLEDs emitting at ≈650-660 nm. This work opens a way to further improve the electroluminescence performance of red PeLEDs.

Heterojunction In Situ Constructed by a Novel Amino Acid-Based Organic Spacer for Efficient and Stable Perovskite Solar Cells

The optical properties and stability of metal halide perovskites can be improved by reducing their dimensionality. Because defects at the perovskite film grain body and boundaries cause significant energetic losses by nonradiative recombination, perovskite films with manageable crystal size and macroscopic grains are essential to improve the photovoltaic properties. Through theoretical calculation models and experiments, we show that the carboxyl group of 4-ammonium butyric acid-based cation (4-ABA⁺) can interact with the three-dimensional (3D) perovskite to produce in situ a secondary grain growth by post-treatment. It passivates the trap defects and broadens the light absorption. 4-ABA⁺ could induce a 2D capping layer on top of 3D mixed cation-based perovskite to construct a 2D/3D heterojunction. The 4-ABA⁺-modified perovskite film consists of large-sized grains with extremely low trap state densities and possesses a longer charge carrier lifetime and good stability, resulting in efficient perovskite solar cells with a champion efficiency of 23.16% and a V_OC of 1.20 V. We show that the 4-ABA⁺-treated devices outperform the 3-ammonium propionic acid (3-APA⁺)- and 5-ammonium valeric acid (5-AVA⁺)-treated ones. Moreover, the devices exhibit high stability under high humidity and continuous light soaking conditions. This work gives a hint that our approach based on 4-ABA⁺ treatment is key to achieving better electrical properties, a controlled crystal growth, and highly stable perovskite solar cells.

Over 16% Efficient Solution-Processed Cu(In,Ga)Se2 Solar Cells via Incorporation of Copper-Rich Precursor Film

Solution processing of Cu(In,Ga)Se₂ (CIGS) absorber is a highly promising strategy for a cost-effective CIGS photovoltaic device. However, the device performance of solution-processed CIGS solar cells is still hindered by the severe non-radiative recombination resulting from deep defects and poor crystal quality. Here, a simple and effective precursor film engineering strategy is reported, where Cu-rich (CGI >1) CIGS layer is incorporated into the bottom of the CIGS precursor film. It has been discovered that the incorporation of the Cu-rich CIGS layer greatly improves the absorber crystallinity and reduces the trap state density. Accordingly, more efficient charge generation and charge transfer are realized. As a result of systematic processing optimization, the champion solution-processed CIGS device delivers an improved open-circuit voltage of 656 mV, current density of 33.15 mA cm^-2 , and fill factor of 73.78%, leading to the high efficiency of 16.05%.

Highly Orientational Order Perovskite Induced by In situ-generated 1D Perovskitoid for Efficient and Stable Printable Photovoltaics

Employing low-dimensional perovskite has been proven to be a promising approach to enhance the efficiency and stability of perovskite solar cells. Here, thiopheniformamidine hydrochloride is introduced into CH₃ NH₃ PbI₃ -based printable mesoscopic perovskite solar cells, to form 1D iodide lead thiophenamidine (TFPbI₃ ) in situ. This judiciously designed low-dimensional perovskite can effectively passivate the defect of perovskite and induce the perovskite crystals to grow in a direction perpendicular to the substrate. Thus, the obtained 1D@3D perovskite could suppress the charge recombination and promote the charge transfer significantly. Benefiting from its dual effect and robustness, a significantly improved power conversion efficiency of 17.42% is yielded. The authors also develop high-performance printable mesoscopic perovskite solar cells with a champion efficiency approaching 13% for aperture area about 11.8 cm² , as well as outstanding operational stability, retaining 90% of the original power conversion efficiency after 1000 hours of continuous illumination at the maximum power point in air.

Ionic Liquid Treatment for Highest-Efficiency Ambient Printed Stable All-Inorganic CsPbI3 Perovskite Solar Cells

All-inorganic cesium lead triiodide (CsPbI₃ ) perovskite is well known for its unparalleled stability at high temperatures up to 500 °C and under oxidative chemical stresses. However, upscaling solar cells via ambient printing suffers from imperfect crystal quality and defects caused by uncontrollable crystallization. Here, the incorporation of a low concentration of novel ionic liquid is reported as being promising for managing defects in CsPbI₃ films, interfacial energy alignment, and device stability of solar cells fabricated via ambient blade-coating. Both theoretical simulations and experimental measurements reveal that the ionic liquid successfully regulates the perovskite thin-film growth to decrease perovskite grain boundaries, strongly coordinates with the undercoordinated Pb²⁺ to passivate iodide vacancy defects, aligns the interface to decrease the energy barrier at the electron-transporting layer, and relaxes the lattice strain to promote phase stability. Consequently, ambient printed CsPbI₃ solar cells with power conversion efficiency as high as 20.01% under 1 sun illumination (100 mW cm^-2 ) and 37.24% under indoor light illumination (1000 lux, 365 µW cm^-2 ) are achieved; both are the highest for printed all-inorganic cells for corresponding applications. Furthermore, the bare cells show an impressive long-term ambient stability with only ≈5% PCE degradation after 1000 h aging under ambient conditions.

Oxide Nanoclusters on Ti3 C2 MXenes to Deactivate Defects for Enhanced Lithium Ion Storage Performance

The commercialization of MXenes as anodes for lithium-ion batteries is largely impeded by low initial coulombic efficiency (ICE) and unfavorable cycling stability, which are closely associated with defects such as Ti vacancies (V_Ti ) in Ti₃ C₂ MXenes. Herein, an effective strategy is developed to deactivate V_Ti defects by in situ growing Al₂ O₃ nanoclusters on MXenes to alleviate the irreversible electrolyte decomposition and Li dendrites formation trend induced by defects, improving ICE and cycling stability. Furthermore, it is revealed that excessively lithiophilic V_Ti defects would impede Li ions diffusion due to their strong adsorption, leading to a locally nonuniform Li flux to these "hot spots," setting scene for the formation of Li dendrites. The Al₂ O₃ nanoclusters anchored on V_Ti sites can not only improve Li diffusion kinetics but also promote the homogeneous solid electrolyte interphase formation with small charge transfer resistance, achieving uniform Li deposition in a smaller overpotential without formation of Li dendrites. As expected, Ti₃ C₂ @Al₂ O₃ -11 electrode delivers a high ICE of 76.6% and an outstanding specific capacity of 285.5 mAh g^-1 after 500 cycles, which is much higher than that of pristine Ti₃ C₂ sample. This work sheds light on modulating defects for high-performance energy storage materials.

Monodisperse Carbon Nitride Nanosheets as Multifunctional Additives for Efficient and Durable Perovskite Solar Cells

Two-dimensional (2D) materials are promising components for defect passivation of metal halide perovskites. Unfortunately, commonly used polydisperse liquid-exfoliated 2D materials generally suffer from heterogeneous structures and properties while incorporated into perovskite films. We introduce monodisperse multifunctional 2D crystalline carbon nitride, poly(triazine imide) (PTI), as an effective defect passivation agent in perovskite films via typical solution processing. Incorporation of PTI into perovskite film can be readily attained by simple solution mixing of PTI dispersions with perovskite precursor solutions, resulting in the highly selective distribution of PTI localized at the defective crystal grain boundaries and layer interfaces in the functional perovskite layer. Several chemical, optical, and electronic characterizations, in conjunction with density functional theory calculations, reveal multiple beneficial roles from PTI: passivation of undercoordinated organic cations at the surface of perovskite crystal, suppression of ion migration by blocking diffusion channels, and prevention of hole quenching at perovskite/SnO₂ interfaces. Consequently, a noticeably improved power conversion efficiency is achieved in perovskite solar cells, accompanied with promoted stability under humid air and thermal stress. Our strategy highlights the potential of judiciously designed 2D materials as a simple-to-implement material for various optoelectronic devices, including solar cells, based on hybrid perovskites.

Embedding of Ti3 C2 Tx Nanocrystals in MAPbI3 Microwires for Improved Responsivity and Detectivity of Photodetector

Organic-inorganic hybrid MAPbI₃ microwires show unique optoelectronic properties for high performances of photodetectors (PDs). However, the defects-assisted nonradiative recombination is harmful for carrier transport, which limits the performances improvement of MAPbI₃ microwires PDs. Traditional organic passivation agents effectively combine the surface defects of microwires and also reduce the mobility of overall film based on the perovskite microwires. Therefore, the improvement of internal carrier transport of microwires and the mobility of integrated film simultaneously is a particular challenge for fabrication of performances enhanced perovskite microwires PDs. Here, the Ti₃ C₂ T_x NCs are fabricated by nonfocus laser irradiation in liquid environment, and hybrids the high conductive NCs in the MAPbI₃ microwires. The presence of Ti₃ C₂ T_x NCs renders defects passivation, enhancement of crystalline orientation, charge transport, and carrier extraction for MAPbI₃ microwires, and boots the mobility of microwires based film, leading to about tenfolds enhancement of performances of PDs than that of the control. The maximum responsivity and the detectivity of the Ti₃ C₂ T_x NCs embedded MAPbI₃ microwires PDs reach to 1.70 A W^-1 and 7.0 × 10¹¹ Jones in visible window, respectively. The findings suggest that the laser generated high conductive Ti₃ C₂ T_x NCs is an effective additive for perovskite microwires to fabricate performances enhanced optoelectronics.

1,10-Phenanthroline as an Efficient Bifunctional Passivating Agent for MAPbI3 Perovskite Solar Cells

Passivation is one of the most promising concepts to heal defects created at the surface and grain boundaries of polycrystalline perovskite thin films, which significantly deteriorate the photovoltaic performance and stability of corresponding devices. Here, 1,10-phenanthroline, known as a bidentate chelating ligand, is implemented between the methylammonium lead iodide (MAPbI₃) film and the hole-transport layer for both passivating the lead-based surface defects (undercoordinated lead ions) and converting the excess/unreacted lead iodide (PbI₂) buried at interfaces, which is problematic for the long-term stability, into "neutralized" and beneficial species (PbI₂(1,10-phen)_x, x = 1, 2) for efficient hole transfer at the modified interface. The defect healing ability of 1,10-phenanthroline is verified with a set of complementary techniques including photoluminescence (steady-state and time-resolved), space-charge-limited current (SCLC) measurements, light intensity dependent JV measurements, and Fourier-transform photocurrent spectroscopy (FTPS). In addition to these analytical methods, we employ advanced X-ray scattering techniques, nano-Fourier transform infrared (nano-FTIR) spectroscopy, and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to further analyze the structure and chemical composition at the perovskite surface after treatment at nanoscale spatial resolution. On the basis of our experimental results, we conclude that 1,10-phenanthroline treatment induces the formation of different morphologies with distinct chemical compositions on the surface of the perovskite film such that surface defects are effectively passivated, and excess/unreacted PbI₂ is converted into beneficial complex species at the modified interface. As a result, an improved power conversion efficiency (20.16%) and significantly more stable unencapsulated perovskite solar cells are obtained with the 1,10-phenanthroline treatment compared to the MAPbI₃ reference device (18.03%).

Managing Defects Density and Interfacial Strain via Underlayer Engineering for Inverted CsPbI2 Br Perovskite Solar Cells with All-Layer Dopant-Free

Inorganic perovskite CsPbI₂ Br has advantages of excellent thermal stability and reasonable bandgap, which make it suitable for top layer of tandem solar cells. Nevertheless, solution-processed all-inorganic perovskites generally suffer from high-density defects as well as significant tensile strain near underlayer/perovskite interface, both leading to compromised device efficiency and stability. In this work, the defect density as well as interfacial tensile strain in inverted CsPbI₂ Br perovskite solar cells (PeSCs) is remarkably reduced by using a bilayer underlayer composed of dopant-free 2,2',7,7'-tetrakis(N,N-dip-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) and copper phthalocyanine 3,4',4″,4'″-tetrasulfonated acid tetrasodium salt (TS-CuPc) nanoparticles. As compared to control devices with pristine Spiro-OMeTAD, devices based on Spiro-OMeTAD/TS-CuPc exhibit remarkably improved photovoltaic performance and enhanced thermal/humidity stability due to the better perovskite crystallization, improved interfacial passivation, and hole-collection as well as efficient interfacial strain release. As a result, a champion efficiency of 14.85% can be achieved, which is approaching to the best reported for dopant-free and inverted all-inorganic PeSCs. The work thus provides an efficient strategy to simultaneously regulate the defects density and strain issue related to inorganic perovskites.

Synergistic Engineering of Natural Carnitine Molecules Allowing for Efficient and Stable Inverted Perovskite Solar Cells

Efficient control of the perovskite crystallization and passivation of the defects at the surface and grain boundaries of perovskite films have turned into the most important strategies to restrain charge recombination toward high-performance and long-term stability of perovskite solar cells (PSCs). In this paper, we employed a small amount of natural vitamin B (carnitine) with dual functional groups in the MAPbI₃ precursor solution to simultaneously passivate the positive- and negative-charged ionic defects, which would be beneficial for charge transport in the PSCs. In addition, such methodology can efficiently ameliorate crystallinity with texture, better film morphology, high surface coverage, and longer charge carrier lifetime, as well as induce preferable energy level alignment. Benefiting from these advantages, the power conversion efficiency of PSCs significantly increases from 16.43 to 20.12% along with not only a higher open-circuit voltage of 1.12 V but also an outstanding fill factor of 82.78%.

Molecular-Level Insight into Correlation between Surface Defects and Stability of Methylammonium Lead Halide Perovskite Under Controlled Humidity

Perovskite-based photovoltaics (PVs) have garnered tremendous interest, enabling power conversion efficiencies exceeding 25%. Although much of this success is credited to the exploration of new compositions, defects passivation and process optimization, environmental stability remains an important bottleneck to be solved. The underlying mechanisms of thermal and humidity-induced degradation are still far from a clear understanding, which poses a severe limitation to overcome the stability issues. Herein, in situ X-ray diffraction (XRD), in operando liquid-cell transmission electron microscopy (TEM) and ex situ solid-state (ss)NMR spectroscopy are combined with time-resolved spectroscopies to reveal new insights about the degradation mechanisms of methylammonium lead halide (MAPbI₃ ) under 85% relative humidity (RH) at different length scales. Liquid-cell TEM enables the live visualizations from meso-to-nanoscale transformation between the perovskite particles and water molecules, which are corroborated by the changes in local structures at sub-nanometer distances by ssNMR and longer range by XRD. This work clarifies the role of surface defects and the significance of their passivation to prevent hydration and decomposition reactions.

Postpassivation of Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 Perovskite Films with Tris(pentafluorophenyl)borane

Passivating defects to suppress recombination is a valid tactic to improve the performance of third-generation perovskite-based solar cells. Pb⁰ is the primary defect in Pb-based perovskites. Here, tris(pentafluorophenyl)borane is inserted between the perovskite and spiro-OMeTAD layer in SnO₂-based planar perovskite solar cells. The incorporation of tris(pentafluorophenyl)borane can effectively passivate Pb⁰ defects, decreasing recombination at the surface of the perovskite film. Additionally, the modification with tris(pentafluorophenyl)borane decreases the grain boundaries quantity in the perovskite film, enhancing the transportation capability of carriers. The resulting perovskite solar cell gets a high efficiency of 21.42%. While the reference device without tris(pentafluorophenyl)borane treatment acquires an efficiency of 19.07%. More importantly, the stability tests manifest that incorporating tris(pentafluorophenyl)borane in perovskite solar cells is conducive to the stability of the device.

High Efficiency CIGS Solar Cells by Bulk Defect Passivation through Ag Substituting Strategy

Cu(In,Ga)Se₂ (CIGS) is considered a promising photovoltaics material due to its excellent properties and high efficiency. However, the complicated deep defects (such as In_Cu or Ga_Cu) in the CIGS layer hamper the development of polycrystalline CIGS solar cells. Numerous efforts have been employed to passivate these defects which distributed in the grain boundary and the CIGS/CdS interface. In this work, we implemented an effective Ag substituting approach to passivate bulk defects in CIGS absorber. The composition and phase characterizations revealed that Ag was successfully incorporated in the CIGS lattice. The substituting of Ag could boost the crystallization without obviously changing the band gap. The C-V and EIS results demonstrated that the device showed enlarged W_d and beneficial carrier transport dynamics after Ag incorporation. The DLTS result revealed that the deep In_Cu defect density was dramatically decreased after Ag substituting for Cu. A champion Ag-substituted CIGS device exhibited a remarkable efficiency of 15.82%, with improved V_OC of 630 mV, J_SC of 34.44 mA/cm², and FF of 72.90%. Comparing with the efficiency of an unsubstituted CIGS device (12.18%), a Ag-substituted CIGS device exhibited 30% enhancement.

Lead-Free Halide Perovskites and Perovskite Variants as Phosphors toward Light-Emitting Applications

Lead halide perovskites have attracted tremendous research interests in the light-emitting field because of their high defect tolerance, solution processability, tunable spectrum, and efficient emission. In terms of luminescence types, both the narrowband emission derived from free-exciton (FE) and broadband white light emission from self-trapped exciton (STE) show great advantages in light-emitting applications. Despite the fascinating characteristics, their commercialization still suffers from the presence of toxic lead (Pb) and unsatisfactory stability. In this spotlight, we mainly focus on the lead-free candidates as phosphors for possible light-emitting applications. Thanks to the chemical diversity of metal halide perovskites and perovskite variants, many excellent lead-free light-emitting materials have recently been synthesized and characterized. We first classify these materials into three types according to material structures, including (1) double perovskites A₂B(I)B(III)X₆, (2) vacancy ordered perovskites A₂B(IV)X₆, (3) miscellaneous perovskite variants or halide semiconductors, which refer to halides without clear relation to the perovskite structure. We then highlight the importance of electronic dimensionality, defect passivation, and impurity doping in developing highly efficient perovskite-based emitters. We also discuss their applications in white light-emitting diodes (W-LED). Further challenges toward practical applications and potential applications are also included in a section on outlook and future challenges.