Cell Adhesion and Migration on Thickness Gradient Bilayer Polymer Brush Surfaces: Effects of Properties of Polymeric Materials of the Underlayer

Sodium Carboxymethylcellulose/Polydopamine Biocellulose Coatings with Enhanced Wet Stability for Implantable Medical Devices

Sodium carboxymethylcellulose (CMC) is a biocompatible and biodegradable derivative of cellulose, making it a promising material for biomedical applications. However, its poor stability in aqueous environments has significantly limited its use in long-term biomedical devices. Here, we present for the first time a simple and controllable method to enhance the wet stability of CMC coatings by cross-linking of CMC and polydopamine (PDA) and self-polymerization of PDA for widespread applications in biomedical devices. A series of CMC/PDA coatings were fabricated on the initial PDA layers by using dip coating and subsequently heated at 200 °C. The performance of the CMC/PDA coatings and their chemical and structural stability in aqueous media have been systematically analyzed, and the mechanisms underpinning their robust performance have been revealed. FITR, X-ray photoelectron spectroscopy (XPS), and gel permeation chromatography (GPC) results showed that CMC/PDA coatings involved amidation and esterification reactions as well as self-polymerization of PDA. Degradation studies in phosphate-buffered saline (PBS) solution at 37 °C indicated degradation via ester and amide bond cleavage, with the stability of CMC/PDA coatings surpassing that of individual PDA and CMC coatings over a 30-day immersion period. The CMC/PDA coating with a CMC concentration of 15 mg/mL exhibited the highest adhesion strength in an aqueous environment, which was attributed to the high cross-linking of CMC and PDA, as well as the intrinsic stability of PDA. The CMC/PDA coatings demonstrated favorable viability, growth, and proliferation of endothelial cells. The stable and biocompatible biocellulose coatings can be easily applied from aqueous solutions onto almost any type of solid metal and ceramic material, providing a promising dimension for surface engineering of vascular scaffolds and tissue engineering constructs.

Surface-Initiated Polymerization with an Initiator Gradient: A Monte Carlo Simulation

Due to the difficulty of accurately characterizing properties such as the molecular weight (Mn) and grafting density (σ) of gradient brushes (GBs), these properties are traditionally assumed to be uniform in space to simplify analysis. Applying a stochastic reaction model (SRM) developed for heterogeneous polymerizations, we explored surface-initiated polymerizations (SIPs) with initiator gradients in lattice Monte Carlo simulations to examine this assumption. An initial exploration of SIPs with 'homogeneously' distributed initiators revealed that increasing σ slows down the polymerization process, resulting in polymers with lower molecular weight and larger dispersity (Đ) for a given reaction time. In SIPs with an initiator gradient, we observed that the properties of the polymers are position-dependent, with lower Mn and larger Đ in regions of higher σ, indicating the non-uniform properties of polymers in GBs. The results reveal a significant deviation in the scaling behavior of brush height with σ compared to experimental data and theoretical predictions, and this deviation is attributed to the non-uniform Mn and Đ.

Photoinduced micropatterning on biodegradable aliphatic polyester surfaces for anchoring dual brushes and its application in bacteria and cell patterning

In view of intrinsic challenges encountered in surface patterning on actual biomaterials such as the ones based on biodegradable polymers, we have demonstrated an innovative strategy to create micro-patterns on the surface of tartaric acid based aliphatic polyester P (poly(hexamethylene 2,3-O-isoprpylidentartarate)) without significant loss of its molecular weight. Around 10 wt% PAG (photoacid generator, 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine) was purposefully encapsulated in a polyester matrix comprising of P and PLA (polylactide) at a ratio of 5 : 95. With the help of a photomask, selective areas of the matrix were exposed to UV radiation at 395 nm for 25 min to trigger the acid release from PAG entrapped unmasked areas for generating hydroxyl functionality that was later converted to an ATRP (atom transfer radical polymerization) initiating moiety on the irradiated domain of P. In subsequent steps, spatio-selective surface modification by surface initiated ATRP was carried out to generate an alternate pattern of polyPEGMA (poly(ethylene glycol)methyl ether methacrylate) and polyDMAPS (poly(3-dimethyl-(methacryloyloxyethyl)ammonium propane sulfonate)) brushes on the matrix. The patterned surface modified with dual brushes was found to be antifouling in nature (rejection of >97% of proteins). Strikingly, an alternate pattern of live bacterial cells (E. coli and S. aureus) was evident and a relatively high population of bacteria was found on the polyPEGMA brush modified domain. However, a complete reverse pattern was visible in the case of L929 mouse fibroblast cells, i.e., cells were found to predominantly adhere to and proliferate on the zwitterionic brush modified surface. An attempt was made to discuss a plausible mechanism of selective cell adhesion on the zwitterionic brush domain. This novel strategy employed on the biodegradable polymer surface provides an easy and straightforward way to micro-pattern various cells, bacteria, etc. on biodegradable substrates which hold great potential to function as biochips, diagnostics, bacteria/cell microarrays, etc.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.