Fully Integrated 3D Microelectrode Arrays with Polydopamine-Mediated Silicon Dioxide Insulation for Electrophysiological Interrogation of a Novel 3D Human, Neural Microphysiological Construct

Advances within in vitro biological system complexity have enabled new possibilities for the "Organs-on-a-Chip" field. Microphysiological systems (MPS) as such incorporate sophisticated biological constructs with custom biological sensors. For microelectromechanical systems (MEMS) sensors, the dielectric layer is critical for device performance, where silicon dioxide (SiO2) represents an excellent candidate due to its biocompatibility and wide utility in MEMS devices. Yet, high temperatures traditionally preclude SiO2 from incorporation in polymer-based BioMEMS. Electron-beam deposition of SiO2 may provide a low-temperature, dielectric serving as a nanoporous MPS growth substrate. Herein, we enable improved adherence of nanoporous SiO2 to polycarbonate (PC) and 316L stainless steel (SS) via polydopamine (PDA)-mediated chemistry. The resulting stability of the combinatorial PDA-SiO2 film was interrogated, along with the nature of the intrafilm interactions. A custom polymer-metal three-dimensional (3D) microelectrode array (3D MEA) is then reported utilizing PDA-SiO2 insulation, for definition of novel dorsal root ganglion (DRG)/nociceptor and dorsal horn (DH) 3D neural constructs in excess of 6 months for the first time. Spontaneous/evoked compound action potentials (CAPs) are successfully reported. Finally, inhibitory drugs treatments showcase pharmacological responsiveness of the reported multipart biological activity. These results represent the initiation of a novel 3D MEA-integrated, 3D neural MPS for the long-term electrophysiological study.

[Polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating for dispersive micro solid-phase extraction of benzoylurea insecticides in water samples]

Pesticides are used in the agricultural production process to ensure the yield and quality of agricultural products. However, in recent years, environmental pollution issues caused by pesticide residues have sparked widespread concern in society. It is important to develop convenient and efficient approaches to detect and monitor pesticide residues. In this study, targeting benzoylurea insecticides (BUs), polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating (SiO₂-PAMAM-PDA) was designed and successfully synthesized. First, monodisperse silica nanoparticles were prepared by the hydrolysis of tetraethyl orthosilicate (TEOS) in mixed solution of ethanol, water and ammonia. The silane coupling agent (3-aminopropyl)triethoxysilane was then employed to introduce amino groups into the silica. Silica with the zeroth generation of polyamidoamine (PAMAM) modification (SiO₂-PAMAM-G0) was obtained through Michael addition reaction of methyl acrylate. Ethylenediamine was added to polymerize with methyl acrylate using an amidation reaction to form the first-generation PAMAM (SiO₂-PAMAM-G1). Finally, by polymerizing dopamine under alkaline conditions (pH=8.5), the SiO₂-PAMAM-G1 was coated with PDA. Thus, the final product named SiO₂-PAMAM-PDA was obtained. The composite was characterized using a transmission electron microscope (TEM) and an increase in surface roughness indicated the successful grafting of PDA coating. Dopamine structure contains abundant benzene rings and amino and hydroxyl groups. It could bind with BUs through multiple secondary interactions, such as hydrogen bond and π-π stacking interaction. Therefore, the introduction of PDA could effectively enhance the affinity of the material toward benzoylurea insecticides. The prepared nanocomposites were used as sorbents in a dispersive micro solid-phase extraction approach (D-μ-SPE). The established approach was employed to extract and enrich the BUs in water samples before high-performance liquid chromatography (HPLC) analysis. Diflubenzuron, triflumuron, hexaflumuron, and teflubenzuron were chosen as target analytes. The following was a typical D-μ-SPE procedure. The prepared adsorbents measuring 40 mg were first dispersed in an 8-mL sample solution containing 150 g/L NaCl. The dispersion was assisted by 120-s vortexing to ensure full contact between the SiO₂-PAMAM-PDA and the targets. Next, the adsorbents were separated from the liquid phase by 4-min centrifugation (5000 r/min). Thereafter, the adsorbed benzoylureas were eluted using 1 mL acetonitrile as desorption solvent by 120-s vortexing. Separated by centrifugation, the eluate was dried under a mild nitrogen stream. The solid remains were redissolved in 0.1 mL of acetonitrile, filtered by filter membrane (0.22 μm), and then analyzed by HPLC. The experimental conditions in the D-μ-SPE process could have a great impact on the extraction efficiency. Experimental conditions were optimized using a single factor optimization approach to further enhance the extraction recoveries. The optimized conditions included adsorbent amount, extraction time, desorption solvent type, desorption solvent volume, desorption time, and NaCl addition amount. Under the optimal conditions, a linearity range of 10-500 μg/L and limits of detection (LODs, S/N=3) of 1.1-2.1 μg/L were obtained. The extraction recoveries and relative standard deviations (RSDs) of the four BUs were 82.8%-94.1% and 2.1%-8.0%, respectively. The established approach was compared with reported approaches targeting benzoylurea insecticides. It was discovered that this approach consumed less sample, material, organic solvent, and pretreatment time. It provided a more rapid and green choice for the determination of benzoylurea pesticides. To determine the applicability, the proposed approach was applied to analyze the four benzoylurea insecticides in three river water samples. The real water samples were pretreated using the developed approach ahead of instrumental analysis, and no benzoylurea pesticides residue was detected. Next, standard addition experiments were performed under three spiking levels, including 15, 50, and 200 μg/L. The established approach had good accuracy and feasibility with satisfactory recoveries (69.5%-99.4%) and RSDs (0.2%-9.5%).

Surface Modification of Ammonium Polyphosphate for Enhancing Flame-Retardant Properties of Thermoplastic Polyurethane

Currently, the development of efficient and environmentally friendly flame-retardant thermoplastic polyurethane (TPU) composite materials has caused extensive research. Ammonium polyphosphate (APP) is used as a general intumescent flame retardant to improve the flame retardancy of TPU. In this paper, we developed a functionalized APP flame retardant (APP-Cu@PDA). Adding only 5 wt% of APP-Cu@PDA into TPU can significantly improve the flame-retardant's performance of the composite material, reflected by a high LOI value of 28% with a UL-94 test of V-0 rating. Compared with pure TPU, the peak heat release rate, total heat release, peak smoke release rate, and total smoke release were reduced by 82%, 25%, 50%, and 29%, respectively. The improvements on the flame-retardant properties of the TPU/5%APP-Cu@PDA composites were due to the following explanations: Cu²⁺-chelated PDA has a certain catalytic effect on the carbonization process, which can promote the formation of complete carbon layers and hinder the transfer of heat and oxygen. In addition, after adding 5% APP-Cu@PDA, the tensile strength and elongation at the break of TPU composites did not decrease significantly. In summary, we developed a new flame-retardant APP-Cu@PDA, which has better flame-retardant properties than many reported TPU composites, and its preparation process is simple and environmentally friendly. This process can be applied to the industrial production of flame retardants in the future.

Application of Polydopamine Functionalized Zinc Oxide for Glucose Biosensor Design

Zinc oxide (ZnO) nanostructures are widely used in optical sensors and biosensors. Functionalization of these nanostructures with polymers enables optical properties of ZnO to be tailored. Polydopamine (PDA) is a highly biocompatible polymer, which can be used as a versatile coating suitable for application in sensor and biosensor design. In this research, we have grown ZnO-based nanorods on the surface of ITO-modified glass-plated optically transparent electrodes (glass/ITO). Then the deposition of the PDA polymer layer on the surface of ZnO nanorods was performed from an aqueous PDA solution in such a way glass/ITO/ZnO-PDA structure was formed. The ZnO-PDA composite was characterized by SEM, TEM, and FTIR spectroscopy. Then glucose oxidase (GOx) was immobilized using crosslinking by glutaraldehyde on the surface of the ZnO-PDA composite, and glass/ITO/ZnO-PDA/GOx-based biosensing structure was designed. This structure was applied for the photo-electrochemical determination of glucose (Glc) in aqueous solutions. Photo-electrochemical determination of glucose by cyclic voltammetry and amperometry has been performed by glass/ITO/ZnO-PDA/GOx-based biosensor. Here reported modification/functionalization of ZnO nanorods with PDA enhances the photo-electrochemical performance of ZnO nanorods, which is well suited for the design of photo-electrochemical sensors and biosensors.

[Advances in polydopamine surface modification for capillary electrochromatography]

Capillary electrophoresis (CE) has a wide range of applications in analytical fields due to its advantages of low sample consumption, short separation time, and high separation efficiency. The cathodic electroosmotic flow (EOF) and single electrophoretic separation mechanism are not optimal for many CE applications. Hence, the use of an unmodified fused-silica capillary leads to insufficient separation performance that cannot meet the requirements for various complex sample systems, especially neutral and chiral compounds. Therefore, it is necessary to introduce various capillary modification strategies in CE so that its potential for practical application can be expanded. Mussel-inspired polydopamine (PDA) and PDA-derived coating materials have fascinating advantages such as simple surface coating procedures, strong surface adhesiveness, good chemical stability, latent reactivity with many functionalized molecules, and good biocompatibility. Thus, they have been widely utilized in different research fields, including catalysis, sensing, water treatment, sample pretreatment, biomedicine, chromatographic separation, and CE. The preparation of PDA coatings is simple as it involves physical adsorption, and the obtained surface adhesive coatings possess good stability similar to covalently bonded coatings. Therefore, PDA and PDA-derived coatings are well suited for the modification of fused-silica capillaries. More importantly, the PDA coating can be utilized as an intermediate reaction platform for diverse subsequent surface modification because of its strong surface adhesive property and strong latent reactivity with many functionalized molecules (such as polymers, proteins, and nanomaterials). Consequently, various chromatographic retention mechanisms can be introduced on the inner wall of the capillary, thereby contributing to the fabrication of multi-functional PDA-based stationary phases for CEC. Owing to these outstanding advantages, researchers are paying increasing attention to the great application potential of PDA and PDA-derived coatings in CEC. In this paper, recent advances in the methods for preparing PDA coatings, especially the recently developed fabrication strategies and various applications of PDA-modified silica capillary in open tubular-capillary electrochromatography (OT-CEC) and capillary electrochromatography monolithic columns, are summarized and discussed. Furthermore, the application prospects of PDA-based coating materials in CEC are prospected in this review. Although PDA and PDA-derived coating materials are seeing widespread utilization in field of CEC, researchers have still not reached a definite conclusion regarding the PDA formation and coating mechanisms, and further investigation is needed in this direction. The PDA coatings formed using existing methods are generally thin. In the early stage, many studies adopted the strategy of repeated coating to improve the coating effect of PDA in capillaries, but this method was found to be time-consuming and less efficient. In order to improve the preparation efficiency of PDA-modified CEC columns, many researchers have focused on fast deposition induced by a strong oxidant to obtain PDA-coated columns. However, the controllability of the PDA coating obtained by this method is poor. Thus, it is necessary to further explore new preparation strategies for PDA-coated CEC capillaries with better reproducibility and stronger operability. On the other hand, although a strategy for directly synthesizing functional PDA-coated CEC columns in the organic phase has been proposed, its application potential in CEC remains to be further explored. In addition, the PDA coating itself has poor porosity and a small specific surface area, which may be significantly improved by modifying the coating on the porous monolithic column surface. However, there has been limited research on the use of PDA coatings in monolithic columns, and their application potential remains to be expanded. With in-depth research into the formation mechanism and preparation methodologies of PDA coatings, PDA, which is a highly malleable biomimetic material, will play a more important role in advances in the fields of CE and CEC.

Biocompatible, Flexible Strain Sensor Fabricated with Polydopamine-Coated Nanocomposites of Nitrile Rubber and Carbon Black

A flexible, biocompatible, nitrile butadiene rubber (NBR)-based strain sensor with high stretchability, good sensitivity, and excellent repeatability is presented for the first time. Carbon black (CB) particles were embedded into an NBR matrix via a dissolving-coating technique, and the obtained NBR/CB composite was coated with polydopamine (PDA) to preserve the CB layer. The mechanical properties of the NBR films were found to be significantly improved with the addition of CB and PDA, and the produced composite films were noncytotoxic and highly biocompatible. Strain-sensing tests showed that the uncoated CB/NBR films possess a high sensing range (strain of ∼550%) and good sensitivity (gauge factor of 52.2), whereas the PDA/NBR/CB films show a somewhat reduced sensing range (strain of ∼180%) but significantly improved sensitivity (gauge factor of 346). The hysteresis curves obtained from cyclic strain-sensing tests demonstrate the prominent robustness of the sensor material. Three novel equations were developed to accurately describe the uniaxial and cyclic strain-sensing behavior observed for the investigated strain sensors. Gloves and knee/elbow covers were produced from the films, revealing that the signals generated by different finger, elbow, and knee movements are easily distinguishable, thus confirming that the PDA/NBR/CB composite films can be used in a wide range of wearable strain sensor applications.

Ni-Based Nanoparticle-Embedded N-Doped Carbon Nanohorns Derived from Double Core-Shell CNH@PDA@NiMOFs for Oxygen Electrocatalysis

The development of highly efficient electrocatalysts for the oxygen evolution reaction (OER) plays a crucial role in many regenerative electrochemical energy-conversion systems. Herein, we report a novel double core-shell-structured CNH@PDA@NiMOF (CNH-D-NiMOF) composite based on the support of carbon nanohorns (CNHs) and the direction of polydopamine (PDA) on the synthesis of metal-organic frameworks (MOFs). It is found that this unique structure improves the electrocatalytic performance and stability of the composites. Furthermore, a controlled partial pyrolysis strategy was proposed to construct the Ni-based nanoparticle-embedded N-doped CNHs. The partial pyrolysis method preserves the framework structure of MOFs for effective substrate diffusion while producing highly active nanoparticles. This leads to the result that the Ni-based nanoparticle-embedded N-doped CNHs possess higher stability and significantly improved electrocatalytic properties. Among these derivatives, the sample prepared at a pyrolysis temperature of 400 °C (named as CNH-D-NiMOF-400) outperforms most of the reported unprecious-metal catalysts. At current densities of 20 and 100 mA·cm^-2, the overpotentials of CNH-D-NiMOF-400 are 270 and 340 mV for the OER on a carbon fiber paper (CFP), respectively. The outstanding electrocatalytic properties above suggest that this composite is an excellent candidate for the substitution of noble metal-based catalysts for OER.

Strong Biomimetic Immobilization of Pt-Particle Catalyst on ABS Substrate Using Polydopamine and Its Application for Contact-Lens Cleaning with H2O2

Polydopamine (PDA)-a known adhesive coating material-was used herein to strongly immobilize a Pt-particle catalyst on an acrylonitrile-butadiene-styrene copolymer (ABS) substrate. Previous studies have shown that the poor adhesion between Pt particles and ABS surfaces is a considerable problem, leading to low catalytic durability for H2O2 decomposition during contact-lens cleaning. First, the ABS substrate was coated with PDA, and the PDA film was evaluated by X-ray photoelectron spectroscopy. Second, Pt particles were immobilized on the PDA-coated ABS substrate (ABS-PDA) using the electron-beam irradiation reduction method. The Pt particles immobilized on ABS-PDA (Pt/ABS-PDA) were observed using a scanning electron microscope. The Pt-loading weight was measured by inductively coupled plasma atomic emission spectroscopy. Third, the catalytic activity of the Pt/ABS-PDA was evaluated as the residual H2O2 concentration after immersing it in a 35,000-ppm H2O2 solution (the target value was less than 100 ppm). The catalytic durability was evaluated as the residual H2O2 concentration after repeated use. The PDA coating drastically improved both the catalytic activity and durability because of the high Pt-loading weight and strong adhesion among Pt particles, PDA, and the ABS substrate. Plasma treatment prior to PDA coating further improved the catalytic durability.

Polydopamine coating promotes early osteogenesis in 3D printing porous Ti6Al4V scaffolds

BACKGROUND

Titanium implants are widely used in orthopedic and dental for more than 30 years. Its stable physicochemical properties and mechanical strength are indeed appropriate for implantation. However, the Bioinertia oxidized layer and higher elastic modulus often lead to the early implantation failure.

METHODS

In this study, we proposed a simple design of porous structure to minimize the disparity between scaffold and natural bone tissue, and introduced a one-step reaction to form a polydopamine (PDA) layer on the surface of titanium for the purpose of improving osteogenesis as well. The porous scaffolds with pore size of 400 µm and porosity of 44.66% were made by additive manufacturing. The cell behavior was tested by seeding MC3T3-E1 cells on Ti6Al4V films for 15 days. The biomechanical properties were then analyzed by finite element (FE) method and the in vivo osteogenesis effect was accordingly evaluated by implanting the scaffolds for 5 weeks in rabbits.

RESULTS

According to the achieved results, it was revealed that the immersion for 40 min with dopamine could significantly improve the cell adhesion. The proposed method for design of porous structure can avoid the stress shielding effect and bone growth inside the PDA coating scaffolds, which were observed at the early stage of bone healing process.

CONCLUSIONS

It can be concluded that the proposed PDA coating method is effective in promoting early osteogenesis, as well as being easy to operate, and can be helpful in the future clinical application of titanium implants.

Highly Stretchable and Biocompatible Strain Sensors Based on Mussel-Inspired Super-Adhesive Self-Healing Hydrogels for Human Motion Monitoring

Integrating multifunctionality such as adhesiveness, stretchability, and self-healing ability on a single hydrogel has been a challenge and is a highly desired development for various applications including electronic skin, wound dressings, and wearable devices. In this study, a novel hydrogel was synthesized by incorporating polydopamine-coated talc (PDA-talc) nanoflakes into a polyacrylamide (PAM) hydrogel inspired by the natural mussel adhesive mechanism. Dopamine molecules were intercalated into talc and oxidized, which enhanced the dispersion of talc and preserved catechol groups in the hydrogel. The resulting dopamine-talc-PAM (DTPAM) hydrogel showed a remarkable stretchability, with over 1000% extension and a recovery rate over 99%. It also displayed strong adhesiveness to various substrates, including human skin, and the adhesion strength surpassed that of commercial double-sided tape and glue sticks, even as the hydrogel dehydrated over time. Moreover, the DTPAM hydrogel could rapidly self-heal and regain its mechanical properties without needing any external stimuli. It showed excellent biocompatibility and improved cell affinity to human fibroblasts compared to the PAM hydrogel. When used as a strain sensor, the DTPAM hydrogel showed high sensitivity, with a gauge factor of 0.693 at 1000% strain, and was capable of monitoring various human motions such as the bending of a finger, knee, or elbow and taking a deep breath. Therefore, this hydrogel displays favorable attributes and is highly suitable for use in human-friendly biological devices.

[Preparation of MIL-53(Fe)@polydopamine@Fe3O4 magnetic composite for magnetic solid-phase extraction of sulfonylurea herbicides in environmental water]

Polydopamine (PDA) and MIL-53(Fe) modified Fe₃O₄ particles (MIL-53(Fe)@PDA@Fe₃O₄ magnetic composite) were prepared by simple one-pot solvothermal method. The obtained composite was introduced to rapidly extract four kinds of sulfonylurea herbicides (SUHs) from environmental water samples by magnetic solid-phase extraction (MSPE). Then the herbicides were analyzed by a high performance liquid chromatographic system equipped with a photodiode array detector. The mobile phase was a mixture of acetonitrile and water containing 0.01% (v/v) trifluoroacetic acid, and the detection wavelength was 233 nm. Significant extraction parameters were optimized to improve the extraction efficiency. Under the optimum conditions (5 mL desorption solvent of acetone, 4.5 min extraction time, 60 mg adsorbent dosage, 0.5 g NaCl and the pH 3 of the solution), the developed method showed good linearities with correlation coefficients (r) no less than 0.9980. The limits of detection (LODs, S/N=3) of the four SUHs were 0.28-0.77 μg/L. The method was successfully used to determine four SUHs in three kinds of environmental water samples with satisfactory recoveries ranging from 78.8% to 109.7%. Therefore, the MIL-53(Fe)@PDA@Fe₃O₄ magnetic composite is efficient and has good potential for the extraction of SUHs.

Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Nature has engineered universal, catechol-containing adhesives which can be synthetically mimicked in the form of polydopamine (PDA). In this study, PDA was exploited to enable the formation of block copolymer (BCP) nanopatterns on a variety of soft material surfaces. While conventional PDA coating times (1 h) produce a layer too rough for most applications of BCP nanopatterning, we found that these substrates could be polished by bath sonication in a weakly basic solution to form a conformal, smooth (root-mean-square roughness ∼0.4 nm), and thin (3 nm) layer free of large prominent granules. This chemically functionalized, biomimetic layer served as a reactive platform for subsequently grafting a surface neutral layer of poly(styrene-random-methyl methacrylate-random-glycidyl methacrylate) to perpendicularly orient lamellae-forming poly(styrene-block-methyl methacrylate) BCP. Moreover, scanning electron microscopy observations confirmed that a BCP nanopattern on a poly(ethylene terephthalate) substrate was not affected by bending with a radius of ∼0.5 cm. This procedure enables nondestructive, plasma-free surface modification of chemically inert, low-surface energy soft materials, thus overcoming many current chemical and physical limitations that may impede high-throughput, roll-to-roll nanomanufacturing.