In-Depth Chemical and Optoelectronic Analysis of Triple-Cation Perovskite Thin Films by Combining XPS Profiling and PL Imaging

Development of High Efficiency, Spray-Coated Perovskite Solar Cells and Modules Using Additive-Engineered Porous PbI2 Films

The development of anti-solvent free, scalable, and printable perovskite film is crucial to realizing the low-cost roll-to-roll development of perovskite solar cells (PSCs). Herein, large-area perovskite film fabrication is explored using a spray-assisted sequential deposition technique. How propylene carbonate (PC) solvent additive affects the transformation of lead halide (PbI2 ) into perovskite at room temperature is investigated. The result shows that PC-modified perovskite films exhibit a uniform, pinhole-free morphology with oriented grains compared with pristine perovskite films. The PC-modified perovskite film also has a prolonged fluorescence lifetime that indicates lower carrier recombination. The champion PSC devices based on PC-modified perovskite film realize a power conversion efficiency (PCE) of 20.5% and 19.3% at an active area (A) of 0.09 cm2 and 1 cm2 , respectively. The fabricated PSCs are stable and demonstrate ≥85% PCE retention following 60 days of exposure to ambient conditions. Furthermore, perovskite solar modules (A ≈ 13 cm2 ) that yield a PCE of 15.8% are fabricated. These results are among the best reported for the state-of-art spray-coated PSCs. Spray deposition coupled with a PC additive is highly promising for economical and high-output preparation of PSCs.

Reductant Engineering in Stable and High-Quality Tin Perovskite Single Crystal Growth for Heterojunction X-Ray Detectors

Tin perovskites have emerged as a promising alternative material to address the toxicity of lead perovskites and the low bandgap of around 1.1 eV is also compatible with tandem solar cell applications. Nevertheless, the optoelectronic performance of solution-processed tin perovskite single-crystal counterparts still lags behind because of the tin instability under ambient conditions during crystal growth and limited reductants to protect the Sn2+ ions from oxidation. Here, the reductant engineering to grow high-quality tin perovskite single crystals under ambient conditions is studied. Oxalic acid (H2 C2 O4 ) serves as an excellent reductant and sacrificial agent to protect Sn2+ ions in methanol due to its suitable redox potential of -0.49 V, and the CO2 as the oxidation product in the gas state can be easily separated from the solution. The FPEA2 SnI4 single crystal grown by this strategy exhibits low trap density perovskite surface by constructing an FPEA2 PbI4 -FPEA2 SnI4 (FPI-FSI) single crystal heterojunction for X-ray detection. An improved X-ray sensitivity of 1.7 × 105 µC Gy-1 cm-2 is realized in the heterojunction device, outperforming the control FPEA2 PbI4 counterpart.

Degradation and Self-Healing of FAPbBr3 Perovskite under Soft-X-Ray Irradiation

The extensive use of perovskites as light absorbers calls for a deeper understanding of the interaction of these materials with light. Here, the evolution of the chemical and optoelectronic properties of formamidinium lead tri-bromide (FAPbBr3 ) films is tracked under the soft X-ray beam of a high-brilliance synchrotron source by photoemission spectroscopy and micro-photoluminescence. Two contrasting processes are at play during the irradiation. The degradation of the material manifests with the formation of Pb0 metallic clusters, loss of gaseous Br2 , decrease and shift of the photoluminescence emission. The recovery of the photoluminescence signal for prolonged beam exposure times is ascribed to self-healing of FAPbBr3 , thanks to the re-oxidation of Pb0 and migration of FA+ and Br- ions. This scenario is validated on FAPbBr3 films treated by Ar+ ion sputtering. The degradation/self-healing effect, which is previously reported for irradiation up to the ultraviolet regime, has the potential of extending the lifetime of X-ray detectors based on perovskites.

Construction of Frustrated Lewis Pair Sites in CeO2-C/BiVO4 for Photoelectrochemical Nitrate Reduction

Photoelectrochemical nitrate reduction reaction (PEC NIRR) could convert the harmful pollutant nitrate (NO₃^-) to high-value-added ammonia (NH₃) under mild conditions. However, the catalysts are currently hindered by the low catalytic activity and slow kinetics. Here, we reported a heterostructure composed of CeO₂ and BiVO₄, and the "frustrated Lewis pairs (FLPs)" concept was introduced for understanding the role of Lewis acids and Lewis bases on PEC NIRR. The electron density difference maps indicated that FLPs were significantly active for the adsorption and activation of NO₃^-. Furthermore, carbon (C) improved the carrier transport ability and kinetics, contributing to the NH₃ yield of 21.81 μg h^-1 cm^-2. The conversion process of NO₃^- to NH₃ was tracked by ¹⁵NO₃^- and ¹⁴NO₃^- isotopic labeling. Therefore, this study demonstrated the potential of CeO₂-C/BiVO₄ for efficient PEC NIRR and provided a unique mechanism for the adsorption and activation of NO₃^- over FLPs.