Robust and Multifunctional 3D Graphene-Based Aerogels Reinforced by Hydroxyapatite Nanowires for Highly Efficient Organic Solvent Adsorption and Fluoride Removal

Recyclable covalent organic frameworks/cellulose aerogels for efficient uranium adsorption

The advancement of efficient, recyclable adsorbents for the economical capture of uranium from seawater is critical for the sustainable progression of nuclear energy. In this work, a unique aerogel composed of covalent organic frameworks (COF-TpTHA)/cellulose nanofibrils (CNF) was synthesized under mild conditions for uranium adsorption. TpTHA/CNF aerogel resolves challenges related to the formability of COF. CNF utilized as the matrix to encapsulate COF-TpTHA in order to improve the dispersion and reinforce the composite materials. The introduction of COF-TpTHA endows CNF aerogel with sufficient active groups for uranium adsorption. X-ray diffraction (XRD) characterization confirmed the successful incorporation of COF while maintaining the type I structure of cellulose. Fourier-transform infrared (FT-IR) spectroscopy further validated the presence of hydrogen bonding interactions between COF and cellulose. The results demonstrated the excellent adsorption efficiency of TpTHA/CNF aerogel towards U(VI), with a maximum adsorption capacity of 177.90 mg g-1 (experiment) for U(VI). Meanwhile, TpTHA/CNF aerogel exhibited favorable adsorption selectivity and reusability. This cellulose-encapsulated COF approach offers a simple and promising method for uranium extraction from seawater, demonstrating its significant application potential.

Hydroxyapatite and its composite in heavy metal decontamination: Adsorption mechanisms, challenges, and future perspective

Nanohydroxyapatite (n-HAP), recognized by its peculiar crystal architecture and distinctive attributes showcased the underlying potential in adsorbing heavy metal ions (HMI). In this paper, the intrinsic mechanism of HMI adsorption by n-HAP was first revealed. Subsequently, the selectivity and competitiveness of n-HAP for HMI in a variety of environments containing various interferences from cations, anions, and organic molecules are elucidated. Next, n-HAP was further categorized according to its morphological dimensions, and its adsorption properties and intrinsic mechanisms were investigated based on these different morphologies. It was shown that although n-HAP has excellent adsorption capacity and cost-effectiveness, its application is often challenging to realize due to its inherent fragility and agglomeration, the technical problems required for its handling, and the difficulty of recycling. Finally, to address these issues, this paper discusses the tendency of n-HAP and its hybridized/modified materials to adsorb HMI as well as the limitations of their applications. By summarizing the limitations and future directions of hybridization/modification HAP in the field of HMI contamination abatement, this paper provides insightful perspectives for its gradual improvement and rational application.

Applications of graphene oxide (GO) in oily wastewater treatment: Recent developments, challenges, and opportunities

The treatment of oily wastewater has become a serious environmental challenge, for which graphene oxide has emerged as a promising material in solving the problem. The ever-growing utilization of graphene oxide (GO) in the treatment of oily wastewater necessitates a constant review. This review article employs a comprehensive literature survey methodology, systematically examining peer-reviewed articles, focusing on, but not entirely limited to, the last five years. Major databases such as EBSCOhost, Scopus, ScienceDirect, Web of Science and Google Scholar were searched using specific keywords related to GO and oily wastewater treatment. The inclusion criteria focused on studies that specifically address the application, efficiency, and mechanisms of GO in treating oily wastewater. The data extracted from these sources were then synthesized to highlight the most important developments, challenges, and prospects in this field. As far as oily wastewater treatment is concerned, the majority of the studies revolve around the use of GO in mitigating fouling in membrane processes, improving the stability, capacity and reusability of sorbents, and enhancing photodegradation by minimizing charge recombination.

Lanthanum Cerate Microspheres for Efficient Fluoride Removal from Wastewater

The performance of lanthanum cerate microspheres (LCM) at removing fluoride was analyzed in batch experiments after they were synthesized via the hydrothermal strategy. The ball-shaped microsphere morphology of LCM is confirmed by SEM and TEM. The synthesized LCM adsorbent showed excellent adsorption capacity in the pH range 3.0-7.0, with the optimal pH range being 3.5-4.5. The Langmuir adsorption model was more appropriate than the Freundlich model for describing the adsorption isotherm. The LCM adsorbent exhibited a significantly higher Langmuir adsorption capacity of 104.83 mg/g at pH 4.0, surpassing that of any other reported adsorbent. We investigated the adsorption of fluoride under a variety of conditions, including the presence of distinct anions. Furthermore, testing the adsorbent in actual groundwater demonstrated its high effectiveness in removing fluoride. Different useful analytical techniques were used for measurements and to learn and deduce the adsorption mechanism.

The function of doping nitrogen on removing fluoride with decomposing La-MOF-NH2: Density functional theory calculation and experiments

Fluoride is an important pollutant in wastewater, and adsorption is an effective way to remove fluoride. Because nitrogen plays an important role in adsorbent materials, computational models were developed to understand the changes in work function resulting from nitrogen doping. La-N-C-800°C, was prepared by pyrolyzing La-MOF-NH2 to verify the influence on the performance of removing fluoride by electrosorption. Material and electrochemical performance tests were performed to characterize La-N-C-800°C. Adsorption kinetics, adsorption thermodynamics, initial concentrations, pH, and ions competition were investigated using La-N-C-800°C for fluoride removal. In addition, density functional theory was applied to evaluate the function of nitrogen. When nitrogen atoms were added, the density of states, partial density of states, populations, and different orbits of charge were calculated to discover deep changes. Nitrogen strengthened the carbon structure and La2O3 structure to remove fluoride. In addition, nitrogen can also act as an adsorption site in the carbon structure. These results provide design ideas for improving the performance of adsorbent materials by doping elements.

The model and mechanism of adsorptive technologies for wastewater containing fluoride: A review

With the continuous development of society, industrialization, and human activities have been producing more and more pollutants. Fluoride discharge is one of the main causes of water pollution. This review summarizes various commonly used and effective fluoride removal technologies, including ion exchange technology, electrochemical technology, coagulation technology, membrane treatment, and adsorption technology, and points out the outstanding advantages of adsorption technology. Various commonly used fluoride removal techniques as well as typical adsorbent materials have been discussed in published papers, however, the relationship between different adsorbent materials and adsorption models has rarely been explored, therefore, this paper categorizes and summarizes the various models involved in static adsorption, dynamic adsorption, and electrosorption fluoride removal processes, such as pseudo-first-order and pseudo-second-order kinetic models, Langmuir and Freundlich isotherm models, Thomas and Clark dynamic adsorption models, including the mathematical equations of the corresponding models and the significance of the models are also comprehensively summarized. Furthermore, this comprehensive discussion delves into the fundamental adsorption mechanisms, quantification of maximum adsorption capacity, evaluation of resistance to anion interference, and assessment of adsorption regeneration performance exhibited by diverse adsorption materials. The selection of the best adsorption model not only predicts the adsorption performance of the adsorbent but also provides a better description and understanding of the details of each part of the adsorption process, which facilitates the adjustment of experimental conditions to optimize the adsorption process. This review may provide some guidance for the development of more cost-effective adsorbent materials and adsorption processes in the future.

Investigation on water defluoridation via batch and continuous mode using Ce-Al bimetallic oxide: Adsorption dynamics, electrochemical and LCA analysis

With variable atomic ratios, Ce-Al bimetallic oxides were fabricated using the sol-gel combustion method and utilized for efficient fluoride removal. The synthesized bimetallic oxides were extensively studied using advanced characterization techniques, including TGA, XRD, FTIR, BET surface area analysis, EDX-assisted FESEM, XPS and impedance analysis. These techniques facilitate the interpretation of the chemical and physical properties of the synthesized material. The Ce-Al (1:1) bimetallic oxide was selected as an adsorbent for the defluoridation. The Ce-Al (1:1) oxide demonstrates a moderately high surface area of 108.67 m²/g. The sorption behaviour of fluoride on Ce-Al (1:1) was thoroughly investigated using batch and column modes. The maximum fluoride removal efficiency (99.4%) was achieved at a temperature of 45 °C and pH of 7.0 using an adsorbent dose of 0.18 g/L for 35 min. Pseudo-second-order kinetic model appropriately describes the sorption process. Freundlich's adsorption isotherm was more pertinent in representing fluoride adsorption behaviour. The maximum fluoride adsorption capacity is 146.73 mg/g at 45 °C. Thermodynamics study indicates fluoride adsorption on Ce-Al (1:1) bimetallic oxide is spontaneous and feasible. The adsorption mechanism was interpreted through XPS spectra, indicating that the physisorption process is mainly responsible for fluoride adsorption. An in-depth investigation of the adsorption dynamics was carried out using mass transfer models and found that the external diffusion process limits the overall adsorption rate. An electrochemical investigation was performed to understand the effect of fluoride adsorption on the electrochemical behaviour of bimetallic oxide. The fixed-bed column adsorption study suggested that the lower flow rate and increased bed height favourably impacted the overall defluoridation process, and column adsorption results were suitably interpreted through both the Adam-Bohart model and Yoon-Nelson dynamics model. The sustainable aspect of the defluoridation process was elucidated in terms of carbon footprint measurement using life cycle assessment analysis. The carbon footprint of the entire treatment process was calculated as 0.094 tons/year.

Functionally-designed floatable amino-modified ZnLa layered double hydroxides/cellulose acetate beads for tetracycline removal: Performance and mechanism

The over-reliance on tetracycline antibiotics (TC) in the animal husbandry and medical field has seriously affected the safety of the ecological environment. Therefore, how to effectively treat tetracycline wastewater has always been a long-term global challenge. Here, we developed a novel polyethyleneimine (PEI)/Zn-La layered double hydroxides (LDH)/cellulose acetate (CA) beads with cellular interconnected channels to strengthen the TC removal. The results of the exploration on its adsorption properties illustrated that the adsorption process exhibited a favorable correlation with the Langmuir model and the pseudo-second-order kinetic model, namely monolayer chemisorption. Among the many candidates, the maximum adsorption capacity of TC by 10 %PEI-0.8LDH/CA beads was 316.76 mg/g. Apart from that, the effects of pH, interfering species, actual water matrix and recycling on the adsorption of TC by PEI-LDH/CA beads were also analyzed to verify their superior removal capability. The potential for industrial-scale applications was expanded through fixed-bed column experiments. The proven adsorption mechanisms mainly included electrostatic interaction, complexation, hydrogen bonding, n-π EDA effect and cation-π interaction. The self-floating high-performance PEI-LDH/CA beads exploited in this work provided fundamental support for the practical application of antibiotic-based wastewater treatment.

Hierarchical camellia-like metal–organic frameworks via a bimetal competitive coordination combined with alkaline-assisted strategy for boosting selective fluoride removal from brick tea

Developing an efficient and easy scale-up adsorbent with excellent fluoride adsorption and selectivity from brick tea is urgently desired. However, the separation of fluoride from tea is particularly challenging due to it contains abundant active compounds. Herein, we report ultrahigh fluoride adsorption from brick tea by a hierarchical camellia-like bimetallic metal-organic frameworks (MOFs). The hierarchical camellia-like Ca₂Al₁Fu is fabricated via a Ca/Al competitive coordination combined with alkaline-assisted strategy to tailor the morphology and porous structure. Subsequently, we systematically explore how the kinetic, thermodynamic, pH, and coexisting ions parameters employed during fluoride adsorption influence the resulting uptake behavior of Ca₂Al₁Fu. Further, sensory evaluation of the tea after adsorption is explored to determine the optimal dose that makes Ca₂Al₁Fu as a practical adsorbent for application. Importantly, the fluoride adsorption capacity of optical CaAlFu with mixed CaAl metals molar ratio of 2:1 is 3.15 and 2.11 times higher than that of pristine CaFu and AlFu, respectively. Theoretical results reveal that the boosting selective fluoride removal can be ascribed to the specific interactions between fluoride and CaAl coordinatively unsaturated bimetallic centers. These results present an effective design strategy for the construction of bimetallic MOFs with hierarchically porous structures for broad prospect in adsorption-based applications.

Construction of HAnW-based nanotwigs for removing inorganic fluorion in wastewater

The environmental pollution with fluoride compounds was currently being paid more and more attention as it threatens the safety of animal and human life in an ecosystem. In this study, an eco-friendly adsorbing material for removing fluoride ion (F^-) was prepared by hydroxyapatite nanowires (HAnWs), a typical biocompatible inorganic conjugates. UiO66, a typical zirconium-based metal-organic framework (MOF), was conjugated onto HAnW by a simple in situ hydrothermal reaction, which afforded a novel HAnW-based nanotwigs of conjugates like millet (UiO66@HAnWs). Being characterized by SEM, EDS, FT-IR, XRD, XPS, and TGA, the obtained UiO66@HAnWs were applied to removing F^- in wastewater, and its adsorption capacity was optimized. It was found that UiO66@HAnWs had a bigger specific surface area (115.310 m²/g), and its efficiency for removing F^- got to 99.3%, which was greatly improved than that of related materials. It was considered that the adsorption of F^- on UiO66@HAnWs was mainly multi-molecular layer adsorption, which fluoride ions aggregate on the Zr(IV) active sites to attain ligand switching, and the nanoconjugated structure like nanotwigs of millet greatly improved its adsorption capacity. In summary, a novel eco-friendly UiO66@HAnWs with nanoconjugated structure could be constructed by simple hydrothermal method, which the agglomeration defects of MOFs were not only ameliorated, but also its adsorption capacity was greatly improved.

Self-Assembly of a Graphene Oxide Liquid Crystal for Water Treatment

Adsorbents, especially those with high removal efficiency, long life, and multi-purpose capabilities, are the most crucial components in an adsorption system. By taking advantage of the liquid-like mobility and crystal-like ordering of liquid crystal materials, a liquid crystal induction method is developed and applied to construct three-dimensional graphene-based adsorbents featuring excellent shape adaptability, a distinctive pore structure, and abundant surface functional groups. When the monoliths are used for water restoration, the large amount of residual oxygen-containing groups is more susceptible to electrophilic attack, thus contributing to cation adsorption (up to 705.4 mg g^-1 for methylene blue), while the connected microvoids between the aligned graphene oxide sheets facilitate mass transfer, e.g., the high adsorption capacity for organic pollutants (196.2 g g^-1 for ethylene glycol) and the high evaporation rate for water (4.01 kg m^-2 h^-1). This work gives a practical method for producing high-performance graphene-based functional materials for those applications that are sensitive to surface and mass transfer properties.

High-efficiency N-doped activated carbon-based defluoridation adsorbent prepared from itaconic acid fermentation waste liquid

Excessive amounts of fluoride in water cause irreversible harm to people and seriously threaten human health.