Enhanced Peroxidase-like Activity of CuS Hollow Nanocages by Plasmon-Induced Hot Carriers and Photothermal Effect for the Dual-Mode Detection of Tannic Acid

Glutathione-mediated copper sulfide nanoplatforms with morphological and vacancy-dependent photothermal catalytic activity for multi-model tannic acid assays

Interface engineering and vacancy engineering play an important role in the surface and electronic structure of nanomaterials. The combination of the two provides a feasible way for the development of efficient photocatalytic materials. Here, we use glutathione (GSH) as a coordination molecule to design a series of CuxS nanomaterials (CuxS-GSH) rich in sulfur vacancies using a simple ultrasonic-assisted method. Interface engineering can induce amorphous structure in the crystal while controlling the formation of porous surfaces of nanomaterials, and the formation of a large number of random orientation bonds further increases the concentration of sulfur vacancies in the crystal structure. This study shows that interface engineering and vacancy engineering can enhance the light absorption ability of CuxS-GSH nanomaterials from the visible to the near-infrared region, improve the efficiency of charge transfer between CuxS groups, and promote the separation and transfer of optoelectronic electron-hole pairs. In addition, a higher specific surface area can produce a large number of active sites, and the synergistic and efficient photothermal conversion efficiency (58.01%) can jointly promote the better photocatalytic performance of CuxS-GSH nanomaterials. Based on the excellent hot carrier generation and photothermal conversion performance of CuxS-GSH under illumination, it exhibits an excellent ability to mediate the production of reactive oxygen species (ROS) through peroxide cleavage and has excellent peroxidase activity. Therefore, CuxS-GSH has been successfully developed as a nanoenzyme platform for detecting tannic acid (TA) content in tea, and convenient and rapid detection of tannic acid is achieved through the construction of a multi-model strategy. This work not only provides a new way to enhance the enzyme-like activity of nanomaterials but also provides a new prospect for the application of interface engineering and vacancy engineering in the field of photochemistry.

Iron decoration in binary graphene oxide and copper iron sulfide nanocomposites boosting catalytic antibacterial activity in acidic microenvironment against antimicrobial resistance

The strong antimicrobial resistance (AMR) of multidrug-resistant (MDR) bacteria and biofilm, especially the biofilm with extracellular polymeric substance (EPS) protection and persister cells, not only renders antibiotics ineffective but also causes chronic infections and makes the infectious tissue difficult to repair. Considering the acidic properties of bacterial infection microenvironment and biofilm, herein, a binary graphene oxide and copper iron sulfide nanocomposite (GO/CuFeSx NC) is synthesized by a surfactant free strategy and utilized as an alternative smart nanozyme to fight against the MDR bacteria and biofilm. For the GO/CuFeSx NC, the iron decoration facilitates the well distribution of bimetallic CuFeSx NPs on the GO surfaces compared to monometallic CuS NPs, providing synergistically enhanced peroxidase (POD)-like activity in acidic medium (pH 4 ∼ 5) and intrinsic strong near infrared (NIR) light responsive photothermal activity, while the ultrathin and sharp structure of 2D GO nanosheet allows the GO/CuFeSx NC to strongly interact with the bacteria and biofilm, facilitating the catalytic and photothermal attacks on the bacterial surfaces. In addition, the GO in GO/CuFeSx NC exhibits a "Pseudo-Photo-Fenton" effect to promote the ROS generation. Therefore, the GO/CuFeSx NC can effectively kill bacteria and biofilm both in vitro and in vivo, finally eliminating the infections and accelerating the tissue repair when treating the biofilm-infected wound. This work paves a new way to the design of novel nanozyme for smart antibacterial therapy against antimicrobial resistance.

Application and progress of nanozymes in antitumor therapy

Tumors remain one of the major threats to public health and there is an urgent need to design new pharmaceutical agents for their diagnosis and treatment. In recent years, due to the rapid development of nanotechnology, biotechnology, catalytic science, and theoretical computing, subtlety has gradually made great progress in research related to tumor diagnosis and treatment. Compared to conventional drugs, enzymes can improve drug distribution and enhance drug enrichment at the tumor site, thereby reducing drug side effects and enhancing drug efficacy. Nanozymes can also be used as tumor tracking imaging agents to reshape the tumor microenvironment, providing a versatile platform for the diagnosis and treatment of malignancies. In this paper, we review the current status of research on enzymes in oncology and analyze novel oncology therapeutic approaches and related mechanisms. To date, a large number of nanomaterials, such as noble metal nanomaterials, nonmetallic nanomaterials, and carbon-based nanomaterials, have been shown to be able to function like natural enzymes, particularly with significant advantages in tumor therapy. In light of this, the authors in this review have systematically summarized and evaluated the construction, enzymatic activity, and their characteristics of nanozymes with respect to current modalities of tumor treatment. In addition, the application and research progress of different types of nicknames and their features in recent years are summarized in detail. We conclude with a summary and outlook on the study of nanozymes in tumor diagnosis and treatment. It is hoped that this review will inspire researchers in the fields of nanotechnology, chemistry, biology, materials science and theoretical computing, and contribute to the development of nano-enzymology.

Multienzyme cascades analysis of α-glucosidase by oxygen deficient MoO3-x

BACKGROUND

Recently, the enzymatic cascade reactions during the cellular process are widely used for fabricating robust biosensors and they have attracted extensive attention in analyzing various clinical biomarkers. The enzymatic cascades analysis is commonly based on the peroxidase (POD)/oxidase coupled system. However, the requirement of harsh acidic environment, poor stability and interference from the oxidase further limit their analytical practicability. Herein, novel chromogenic nanomaterials with H2O2 sensitive features are urgently required to replace the POD nanozyme in enzymatic cascades based bioanalysis.

RESULTS

Herein, oxygen deficient MoO3-x with H2O2 sensitive features and near-infrared (NIR) absorption band have been ultra-fast synthesized and utilized for the enzymatic cascades analysis of α-Glucosidase's activity, and inhibitors screening. With the addition of 4-nitrophenyl-α-d-glucopyranoside, the simultaneous presence of α-Glucosidase and glucose oxidase (GOx) would fade their dark blue color and decrease the NIR absorption. The α-Glucosidase's activity can be analyzed by the absorption at 770 nm, and their limit of detection is 8 × 10-5 U/mL, indicating the superior performance of the proposed colorimetric assay. Moreover, this proposed α-Glucosidase assay is further utilized for inhibitors screening. Moreover, the activity of α-Glucosidase can also be analyzed by the smartphone and microplate reader through the agarose-based colorimetric portable kit.

SIGNIFICANCE

This MoO3-x involved enzymatic cascades assay would facilitate for the development of bio-analysis related to H2O2 generation or consumption. Moreover, this bio-analysis strategy will contribute to the development of other H2O2 sensitive chromogenic nanomaterials for the analysis of certain biomolecules and biological enzymes.

Dual-Readout Ultrasensitive Lateral Flow Immunosensing of Salmonella typhimurium in Dairy Products by Doping Engineering-Powered Nanoheterostructure with Enhanced Photothermal Performance

The photothermal lateral flow immunoassay (LFIA) is of great significance to suitable for on-site semiquantitative detection, which has the upper hand in further constructing detection methods for low-concentration targets. Herein, we presented a doping engineering-powered nanoheterostructure with an enhanced photothermal performance strategy, employing bimetallic nanocuboid Pt3Sn (PSNCs) as a proof of concept. With the help of finite element simulation analysis, the contrast of direct temperature experiment, and the evaluation of photothermal conversion efficiency (η), the distinguished and enthusiastic photothermal feedback of PSNCs is proved. Based on steady bright black of colorimetric and superior photothermal performance, the PSNCs were employed to construct an ultrasensitive model LIFA for detecting Salmonella typhimurium (S. typhimurium), which achieved the double-signal semiquantitative detection, the detection limit reached 103 cfu mL-1 (colorimetric mode) and 102 cfu mL-1 (photothermal mode), which is 100 times higher than that of the traditional colloidal gold method. In addition, the method was effective for the detection of targets in dairy samples only through a simple dilution treatment, which was completed within 15 min. Meanwhile, this PSNCs dual-signal LFIA demonstrated the sensitive detection of S. typhimurium due to the excellent colorimetric signal and significant photothermal performance, which provides a broad spectrum for the future detection of foodborne pathogens.

Synergistic action of cavity and catalytic sites in etched Pd-Cu2O octahedra to augment the peroxidase-like activity of Cu2O nanoparticles for the colorimetric detection of isoniazid and ascorbic acid

Despite the widespread use of nanozyme-based colorimetric assays in biosensing, challenges such as limited catalytic efficiency, inadequate sensitivity to analytes, and insufficient understanding of the structure-activity relationship still persist. Overcoming these hurdles by enhancing the inherent enzyme-like performance of nanozymes using the unique attributes of nanomaterials is still a significant obstacle. Here, we designed and constructed Pd-Cu2O nanocages (Pd-Cu2O NCs) by selectively etching the vertices of the copper octahedra to enhance the peroxidase-like (POD-like) activity of Cu2O nanoparticles. The improved catalytic activity of Pd-Cu2O NCs was attributed to their high specific surface area and abundant catalytic sites. Mechanistic studies revealed that reactive oxygen species (ROS) intermediates (•OH) were generated through the decomposition of H2O2, resulting in POD-like activity of the Pd-Cu2O NCs. The designed Pd-Cu2O NCs can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2, producing a blue oxidation product (oxTMB). The oxidation reaction was inhibited and led to a significant bleaching of the blue color in the presence of reducing substances isoniazid (INH) and ascorbic acid (AA). Based on these principles, we developed a colorimetric sensing platform for the detection of INH and AA, exhibiting good sensitivity and stability. This work provided a straightforward approach to the structural engineering of nanomaterials and the enhancement of enzyme-mimicking properties.

Manganese Amplifies Photoinduced ROS in Toluidine Blue Carbon Dots to Boost MRI Guided Chemo/Photodynamic Therapy

The contrast agents and tumor treatments currently used in clinical practice are far from satisfactory, due to the specificity of the tumor microenvironment (TME). Identification of diagnostic and therapeutic reagents with strong contrast and therapeutic effect remains a great challenge. Herein, a novel carbon dot nanozyme (Mn-CD) is synthesized for the first time using toluidine blue (TB) and manganese as raw materials. As expected, the enhanced magnetic resonance (MR) imaging capability of Mn-CDs is realized in response to the TME (acidity and glutathione), and r1 and r2 relaxation rates are enhanced by 224% and 249%, respectively. In addition, the photostability of Mn-CDs is also improved, and show an efficient singlet oxygen (1 O2 ) yield of 1.68. Moreover, Mn-CDs can also perform high-efficiency peroxidase (POD)-like activity and catalyze hydrogen peroxide to hydroxyl radicals, which is greatly improved under the light condition. The results both in vitro and in vivo demonstrate that the Mn-CDs are able to achieve real-time MR imaging of TME responsiveness through aggregation of the enhanced permeability and retention effect at tumor sites and facilitate light-enhanced chemodynamic and photodynamic combination therapies. This work opens a new perspective in terms of the role of carbon nanomaterials in integrated diagnosis and treatment of diseases.

High-loading Cu single-atom nanozymes supported by carbon nitride with peroxidase-like activity for the colorimetric detection of tannic acid

The design of nanozymes with high metal atom loading is of great significance to improve enzyme activity and is also the key to furthering the construction of highly sensitive colorimetric sensors. In this work, a colorimetric sensor for the quantitative analysis of tannic acid (TA) was developed based on two-dimensional carbon nanosheet carbon nitride (CN)-supported Cu single-atom nanozymes (Cu/CN). Cu/CN was synthesized by supramolecular preorganization and calcination, with an ultrathin nanosheet structure and a high density of Cu active sites, with a Cu loading of up to 14.3 wt%. Benefiting from the above characteristics, Cu/CN exhibits peroxidase-mimicking activity and excellent catalytic performance. Therefore, a colorimetric sensor was constructed for the fast and sensitive quantitative analysis of TA with good linearity in the range of 0.09-3.2 μM and a low detection limit of 30 nM. Furthermore, the sensor was successfully applied to the analysis of TA in tea samples of different varieties. This work sheds new light on the design of nanozymes with a high density of active sites and the analysis of TA in real environments.

Engineering Cell Membrane-Cloaked Catalysts as Multifaceted Artificial Peroxisomes for Biomedical Applications

Artificial peroxisomes (APEXs) or peroxisome mimics have caught a lot of attention in nanomedicine and biomaterial science in the last decade, which have great potential in clinically diagnosing and treating diseases. APEXs are typically constructed from a semipermeable membrane that encloses natural enzymes or enzyme-mimetic catalysts to perform peroxisome-/enzyme-mimetic activities. The recent rapid progress regarding their biocatalytic stability, adjustable activity, and surface functionality has significantly promoted APEXs systems in real-life applications. In addition, developing a facile and versatile system that can simulate multiple biocatalytic tasks is advantageous. Here, the recent advances in engineering cell membrane-cloaked catalysts as multifaceted APEXs for diverse biomedical applications are highlighted and commented. First, various catalysts with single or multiple enzyme activities have been introduced as cores of APEXs. Subsequently, the extraction and function of cell membranes that are used as the shell are summarized. After that, the applications of these APEXs are discussed in detail, such as cancer therapy, antioxidant, anti-inflammation, and neuron protection. Finally, the future perspectives and challenges of APEXs are proposed and outlined. This progress review is anticipated to provide new and unique insights into cell membrane-cloaked catalysts and to offer significant new inspiration for designing future artificial organelles.

Dual-modification strategy of Co(II) and g-C3N4 to CuS for efficient colorimetric determination of thioglycolic acid in daily cosmetics

A conventional colorimetric method based on CuS-catalyzed H₂O₂ is improved by a dual-modification strategy and employed for thioglycolic acid (TGA) determination. The doping of Co(II) can enhance ion exchange efficiency. Meanwhile, the modification of g-C₃N₄ can increase specific surface area and decrease unspecific aggregation. The constructed g-C₃N₄/Co-CuS nanocomposite exhibited a favorable catalytic feature. A Michaelis constant (K_m) value of 0.02 mM has been achieved, which is 1/160 of those of CuS and horseradish peroxidase (HRP). The g-C₃N₄/Co-CuS displays a rapid color response in 3 min and resulted in a stable measurable signal within 10 min. In the determination procedure, the sulfhydryl contained in TGA is capable of preventing TMB oxidation via competing the ·OH produced by catalysis and caused a color distinction that is related to the TGA amount. The distinctions of absorbance (λ_max = 652 nm) of different concentrations of TGA are recorded. Linearity is obtained in the ranges of 2.5 - 20 µM and 20 - 160 µM, and the LOD is 0.14 µM. In the real sample assays of perm agent and Qianhu lake water, the recoveries were 96.70 - 106.84% and 100.21 - 101.90%, respectively. This demonstrates that the proposed dual-modification strategy for CuS contributes to highly efficient and convenient determination of TGA in daily cosmetics and water analysis.

Plasmon-Mediated Oxidase-like Activity on Ag@ZnS Heterostructured Hollow Nanowires for Rapid Visual Detection of Nitrite

Rational design of fast and sensitive determination of nitrite (NO₂^-) from a complicated actual sample overtakes a crucial role in constructing a high-efficiency sensing platform. Herein, a visual NO₂^- sensing platform with outstanding selectivity, sensitivity, and stability based on a surface plasmon resonance (SPR)-enhanced oxidase-like activity has been proposed. Benefiting from the intrinsic photocatalytic activity and limited light penetration of ZnS, the oxidase-like activity based on ZnS decorated on Ag nanowires (Ag@ZnS) is determined. It is demonstrated that the electrons are generated efficiently on the surface of ZnS and then transferred into the hot electrons of Ag with the help of localized SPR excitation, thus greatly oxidating the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to produce dark blue oxidized TMB (oxTMB). When nitrite is added into the reaction system, the oxTMB will selectively react with NO₂^- to generate diazotized oxTMB, leading to a visual color change from dark blue to light green and subsequently to dark yellow. Owing to the specific recognition between nitrite and oxTMB, the recovery of catalytic activity induced an enhanced colorimetric test with a wider linear range for NO₂^- determination, an ultralow detection limit of 0.1 μM, excellent selectivity, and practicability for application in real samples. This plasmon-enhanced oxidase-like activity not only provides a smart approach to realize a colorimetric assay with high sensitivity and simplicity but also modulates oxidase-like activities.

Photo-Stimuli-Responsive CuS Nanomaterials as Cutting-Edge Platform Materials for Antibacterial Applications

Photo-stimuli-responsive therapeutic nanomaterials have gained widespread attention as frontline materials for biomedical applications. The photoactivation strategies are classified as single-modality (based on either reactive oxygen species (ROS)-based photodynamic therapy (PDT), hyperthermia-based photothermal therapy (PTT)), or dual-modality (which combines PDT and PTT). Due to its minimal invasiveness, phototherapy has been extensively applied as an efficient therapeutic platform for many diseases, including skin cancers. However, extensive implementation of phototherapy to address the emergence of multidrug-resistant (MDR) bacterial infections remains challenging. This review focuses on copper sulfide (CuS) nanomaterials as efficient and cost-effective PDT and PTT therapeutic nanomaterials with antibacterial activity. The features and merits of CuS nanomaterials as therapeutics are compared to those of other nanomaterials. Control of the dimensions and morphological complexity of CuS nanomaterials through judicious synthesis is then introduced. Both the in vitro antibacterial activity and the in vivo therapeutic effect of CuS nanomaterials and derivative nanocomposites composed of 2D nanomaterials, polymers, metals, metal oxides, and proteins are described in detail. Finally, the perspective of photo-stimuli-responsive CuS nanomaterials for future clinical antibacterial applications is highlighted. This review illustrates that CuS nanomaterials are highly effective, low-toxic, and environmentally friendly antibacterial agents or platform nanomaterials for combatting MDR bacterial infections.