Patternable Nanocellulose/Ti3C2Tx Flexible Films with Tunable Photoresponsive and Electromagnetic Interference Shielding Performances

Nanocellulose-mediated bilayer hydrogel actuators with thermo-responsive, shape memory and self-sensing performances

Inspired by creatures, abundant stimulus-responsive hydrogel actuators with diverse functionalities have been manufactured for applications in soft robotics. However, constructing a shape memory and self-sensing bilayer hydrogel actuator with high mechanical strength and strong interfacial bonding still remains a challenge. Herein, a novel bilayer hydrogel with a stimulus-responsive TEMPO-oxidized cellulose nanofibers/poly(N-isopropylacrylamide) (TOCN/PNIPAM) layer and a non-responsive TOCN/polyacrylamide (TOCN/PAM) layer is proposed as a thermosensitive actuator. TOCNs as a nano-reinforced phase provide a high mechanical strength and endow the hydrogel actuator with a strong interfacial bonding. Due to the incorporation of TOCNs, the TOCN/PNIPAM hydrogel exhibits a high compressive strength (~89.2 kPa), elongation at break (~170.7 %) and tensile strength (~24.0 kPa). The prepared PNIPAM/TOCN/PAM hydrogel actuator performs the roles of an encapsulation, jack, temperature-controlled fluid valve and temperature-control manipulator. The incorporation of Fe3+ further endows the bilayer hydrogel actuator with a synergistic performance of shape memory and temperature-driven, which can be used as a temperature-responsive switch to detect ambient temperature. The PNIPAM/TOCN/PAM-Fe3+ conductive hydrogel can be assembled into a flexible sensor and generate sensing signals when driven by temperature changes to achieve real-time feedback. This research may lead to new insights into the design and manufacturing of intelligent flexible soft robots.

Nanocellulose-mediated conductive hydrogels with NIR photoresponse and fatigue resistance for multifunctional wearable sensors

The rapid development of hydrogels has garnered significant attention in health monitoring and human motion sensing. However, the synthesis of multifunctional conductive hydrogels with excellent strain/pressure sensing and photoresponsiveness remains a challenge. Herein, the conductive hydrogels (BPTP) with excellent mechanical properties, fatigue resistance and photoresponsive behavior composed of polyacrylamide (PAM) matrix, 2,2,6,6-tetramethylpiperidin-1-yloxy-oxidized cellulose nanofibers (TOCNs) reinforcement and polydopamine-modified black phosphorus (BP@PDA) photosensitizer are prepared through a facile free-radical polymerization approach. The PDA adhered to the BP surface by π-π stacking promotes the optical properties of BP while also preventing BP oxidation from water. Through hydrogen bonding interactions, TOCNs improve the homogeneous dispersion of BP@PDA nanosheets and the mechanical toughness of BPTP. Benefiting from the synergistic effect of PDA and TOCNs, the conductive BPTP integrates superior mechanical performances, excellent photoelectric response and photothermal conversion capability. The BPTP-based sensor with high cycling stability demonstrates superior strain sensitivity (GF = 6.0) and pressure sensing capability (S = 0.13 kPa-1) to monitor various human activities. Therefore, this work delivers an alternative construction strategy for generating high-performance conductive hydrogels as multifunctional wearable sensors.

Preparation of tannic acid-reinforced cellulose nanofiber composites for all-water-based high-performance wood adhesives

Traditional adhesives easily release toxic gases during the preparation process or apply to wood composite products, which have adverse effects on the human body and the environment. Herein, an all-water-based high-performance wood adhesive is prepared using TEMPO-oxidized cellulose nanofiber (TOCNF), acrylamide (AM), and tannic acid (TA) through free radical polymerization. Different characteristics of the prepared composites, including morphology, injectability, and adhesion properties, have been investigated. Results showed that the TA/TOCNF/PAM composite has excellent injectability. The addition of TA can enhance the lap shear strength of the TA/TOCNF/PAM composites and with the increment of TA content, the lap shear strength gradually decreases. The formation of effective hydrogen bonds and Van der Waals interaction among the rich functional groups in the composite, lead to strong lap shear strength on different substrates. The composite with 5.0 g of AM, 5.0 g of the TOCNF suspension and 0.1 g TA possesses a high lap shear strength of 10.5 MPa on wood and 1.5 MPa on aluminium. Based on strong adhesion properties and excellent injectability, the TA/TOCNF/PAM composites have great potential in the furniture construction and building industries.

Flexible cellulose nanofibers/MXene composite films for UV-shielding packaging

Cellulose nanofibers (CNF) based films are promising packaging materials, but the lack of special functions (especially UV-shielding property) usually restrict their further applications. In this work, MXene was incorporated into the CNF film by a direct solvent volatilization induced film forming method to study its UV-shielding property for the first time, which avoided the using of a vacuum filtration equipment. The composite films containing glycerin could be folded repeatedly without breaking, showing good flexibility. The structure and properties of MXene/CNF composite films (CMF) were characterized systematically. The results showed that MXene distributed uniformly in the CNF film matrix and there was strong hydrogen bonding interaction between CNF and MXene. The tensile strength and Young's modulus of the composite films could reach 117.5 MPa and 2.23 GPa, which was 54.1 % and 59.2 % higher than those of pure CNF film, respectively. With the increase of MXene content, both the UVA and UVB shielding percentages increased significantly from 17.2 % and 25.5 % to 100.0 %, showing excellent UV-shielding property. Moreover, CMF exhibited a low oxygen permeability (OP) value of 0.39 cc μm d-1 m-2 kPa-1, a low water vapor permeability (WVP) value of 5.13 × 10-11 g-1s-1Pa-1 and a high antibacterial rate against E. coli (94.1 % at 24 h), showing potential application in the packaging field.

Extraction and characterization of a novel cellulosic fiber derived from the bark of Rosa hybrida plant

The current investigation aims to choose an alternate potential replacement for the nonbiodegradable synthetic fibers used in polymer composites. This goal motivated the thorough characterization of Rosa hybrida bark (RHB) fibers. The research explored fiber characterization such as morphological, mechanical, thermal, and physical properties. The suggested fiber features a percentage of cellulose, hemicellulose molecules, and lignin of 52.99 wt%, 18.49 wt%, and 17.34 wt%, respectively according to chemical composition studies, which improves its mechanical properties. It is suitable for lightweight applications due to its decreased density (1.194 gcm-3). The purpose of the Fourier transform infrared spectroscope was to observe and record how various chemical groups were distributed throughout the surface of the fiber. The presence of 1.41 nm-sized crystalline cellulose and further XRD analysis showed a crystallinity index of 75.48 %. Scanning electron microscope studies revealed that RHB fibers have a rough surface. According to a single fiber tensile test, for gauge length (GL) 40 mm, Young's modulus and tensile strength of RHB fibers were 6.57 GPa and 352.01 MPa, respectively, and for GL 50 mm, 9.02 GPa and 311 MPa, respectively. Furthermore, thermo-gravimetric examination revealed that the isolated fibers were thermally stable up to 290 °C and the kinetic activation energy was found to be 75.32 kJ/mol. The fibers taken from the Rosa hybrida flower plants' bark exhibit qualities similar to those of currently used natural fibers, making them a highly promising replacement for synthetic fibers in polymer matrix composites.

Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management

Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.

Constructing triple-network cellulose nanofiber hydrogels with excellent strength, toughness and conductivity for real-time monitoring of human movements

In recent years, there has been a lot of interest in developing composite hydrogels with superior mechanical and conductive properties. In this study, triple-network (TN) cellulose nanofiber hydrogels were prepared by using cellulose nanofiber as the first network, isotropic poly(acrylamide-co-acrylic acid) as the second network, and polyvinyl alcohol as the third network via a cyclic freezing-thawing process. The strong (9.43 ± 0.14 MPa tensile strength, (445.5 ± 7.0)% elongation-at-break), tough (15.12 ± 0.14 MJ/m3 toughness), and conductive (0.0297 ± 0.00021 S/cm ionic conductivity) TN cellulose nanofiber hydrogels were effectively created after being pre-stretched in an external force field, cross-linked by Fe3+ and added Li+. The produced composite TN cellulose nanofiber hydrogels were successfully used as a flexible sensor for real-time monitoring and detecting human movements, highlighting their potential for wearable electronics, medical technology, and human-machine interaction. CHEMICAL COMPOUNDS STUDIED IN THIS ARTICLE: Acrylamide (PubChem CID: 6579); Acrylic acid (PubChem CID: 6581); Ammonium persulfate (PubChem CID: 6579); N, N'-methylene bisacrylamide (PubChem CID: 17956053); Sodium bromide (PubChem CID: 253881); Sodium hydroxide (PubChem CID: 14798); Sodium hypochlorite (PubChem CID: 23665760); Sodium chlorite (PubChem CID: 23668197); 2,2,6,6-tetramethylpiperidinyl-1-oxide (PubChem CID: 2724126); Polyvinyl alcohol (PubChem CID: 11199); Lithium chloride (PubChem CID: 433294); Iron nitrate nonahydrate (PubChem CID: 129774236).

Synthesis, Properties, and Applications of Nanocomposite Materials Based on Bacterial Cellulose and MXene

MXene exhibits impressive characteristics, including flexibility, mechanical robustness, the capacity to cleanse liquids like water through MXene membranes, water-attracting nature, and effectiveness against bacteria. Additionally, bacterial cellulose (BC) exhibits remarkable qualities, including mechanical strength, water absorption, porosity, and biodegradability. The central hypothesis posits that the incorporation of both MXene and bacterial cellulose into the material will result in a remarkable synthesis of the attributes inherent to MXene and BC. In layered MXene/BC coatings, the presence of BC serves to separate the MXene layers and enhance the material's integrity through hydrogen bond interactions. This interaction contributes to achieving a high mechanical strength of this film. Introducing cellulose into one layer of multilayer MXene can increase the interlayer space and more efficient use of MXene. Composite materials utilizing MXene and BC have gained significant traction in sensor electronics due to the heightened sensitivity exhibited by these sensors compared to usual ones. Hydrogel wound healing bandages are also fabricated using composite materials based on MXene/BC. It is worth mentioning that MXene/BC composites are used to store energy in supercapacitors. And finally, MXene/BC-based composites have demonstrated high electromagnetic interference (EMI) shielding efficiency.

Cellulose-based evaporator with dual boost of water transportation and photothermal conversion for highly solar-driven evaporation

Two-dimensional (2D) evaporation systems could significantly reduce the heat conduction loss compared with the photothermal conversion materials particles during the evaporation process. But the normal layer-by-layer self-assembly method of 2D evaporator would reduce the water transportation performance due to the highly compact channel structures. Herein, in our work, the 2D evaporator with cellulose nanofiber (CNF), Ti₃C₂T_x (MXene) and polydopamine modified lignin (PL) by layer-by-layer self-assembly and freeze-drying methods. The addition of PL also enhanced the light absorption and photothermal conversion performance of the evaporator due to the strong conjugation and π-π molecular interactions. After the combination process of layer-by-layer self-assembly and freeze-drying process, the as-prepared freeze-dried CNF/MXene/PL (f-CMPL) aerogel film exhibited highly interconnected porous structure with promoted hydrophilicity (enhanced water transportation performance). Benefiting these favorable properties, the f-CMPL aerogel film showed enhanced light absorption performance (surface temperature could be reached to 39 °C under 1 sun irradiation) and higher evaporation rate (1.60 kg m^-2 h^-1). This work opens new way to fabricate cellulose-based evaporator with highly evaporation performance for the solar steam generation and provides a new idea for improving the evaporation performance of 2D cellulose-based evaporator.

Surface engineering on cholesteric cellulose nanocrystals films inducing emulsification, organic pollutants detection and separation

Nowadays, organic pollutants have been major concerns in many fields. Production of functional materials based on renewable and sustainable resources for organic pollutants detection and removal was of much interest. Herein, multi-functional nanocomposite films based on cellulose nanocrystals (CNCs) with high optical haze, organic pollutant detection and emulsion separation capabilities, have been successfully fabricated based on hydrophobically-modified CNCs suspensions by 2-dodecen-1-succinic anhydride (DDSA) followed by radical polymerization with tridecafluorooctyl (TFMA). The suspensions displayed satisfying oil-in-water emulsion stabilization capabilities and the vacuum-dried films showed birefringence, high transparency, and optical haze (~85 %), due to the ordered arrangements of cellulose nanocrystals. The organic pollutant can be detected through the iridescent colors disappearing by Polarizing Optical Microscope observation. In addition of improved mechanical strength for application (27 MPa) and high contact angle of 131.6°, the hydrophobic films performed as high separation efficiency as >90 % of emulsion, due to the successfully grafting of hydrophobic molecules on the surface of CNCs. Thus, the surface modification for CNCs provide a facile approach of emulsification, pollutants detection and separation properties, which would widen the application potentials of renewable cellulosic resources in fields of environmental protection, engineering control and petroleum industry.

Bioinspired Carbon Superstructures for Efficient Electromagnetic Shielding

Biologically inspired superstructural materials exhibit wide application prospects in many fields, in terms of mitigating increasingly serious electromagnetic (EM) pollution in the civil field. Here, we successfully obtain bamboo slices with uniform pore size distribution through the advanced bamboo transverse splitting technology developed by our group previously and prepare large-scale honeycomb-like carbon-based tubular array (CTA) structures with a controllable pore size, graphitization degree, and selectable conductivity property. Based on the simulation and experimental results, the EM shielding performance of CTAs is proven to be sensitive to the microchannel aperture size and the EM energy incident angle, which is attributed to the difference in the propagation rate of induced electrons in different directions. Among the candidates, CTA-middle-1500 exhibits the best shielding performance against incident EM energy with average SE/ρ values of 123.7 and 144.5 dB cm³ g^-1 for perpendicular and parallel directions, respectively, showing its application potential as a lightweight and efficient EM shielding material. The predicted optimal incident angle for CTA-middle-1500 against EM energy radiation is 15°, with the largest RCS reduction value of 26.1 dB m². The excellent EM shielding performance is attributed to the good reflection capacity involved with the high conductivities of the CTAs.