Morphology and Luminescence Regulation for CsPbBr3 Perovskite Light-Emitting Diodes by Controlling Growth of Low-Dimensional Phases

Neutral inorganic salt additives universally regulate multicolor perovskites for efficient electroluminescence

Quasi-two-dimensional (quasi-2D) perovskites show great potential in light-emitting diodes. The use of additives plays a key role in the passivation of defects and the suppression of low-dimensional phases. However, the effects of additives vary greatly in different perovskite formulations/films with different light-emitting bands. In this paper, the universal utility of additives was achieved through sodium hexafluorophosphate (NaPF6). Benefitting from the neutral environment of the additives and the hydrogen bonds formed by PF6-/PEA+ (F⋯H-N), the low-dimensional phases are effectively reduced, and the distribution of the medium/high-dimensional phases is more balanced. Meanwhile, the PF6- anionic group can passivate the uncoordinated Pb2+, and reduce the defect density of the film. Finally, a maximum EQE of 16.8% was achieved in quasi-2D PEA2Csn-1PbnBr3n+1 green PeLEDs (514 nm), which was significantly higher than that of the pristine device (a maximum EQE of 10%). Correspondingly, the maximum EQE of sky blue PeLEDs (490 nm) based on the mixed halogen [(PEA)0.75(GA)0.25]2CsPb2X7 (X = Br and Cl) component can be increased from 5.6% to 9.6%. The maximum EQE of pure blue PeLEDs (474 nm) can be increased from 3% to 4%. This class of neutral additives provides a solution for high-performance quasi-2D perovskite electroluminescence.

Restraint of Nonradiative Recombination via Modulation of n-Phase Distribution through Interfacial Lithium Salt Insertion for High-Performance Pure-Blue Perovskite LEDs

Quasi-two-dimensional perovskite has been widely used in blue perovskite light-emitting diodes. However, the performance of these devices is still hampered by random phase distribution, nonradiative recombination, and imbalanced carrier transport. In this work, an effective strategy is proposed to mitigate these limitations by inserting lithium salts at the interfaces between the hole transport layer (HTL) and the perovskite layer. The perovskite film on the inserted Li2CO3 layer exhibits reasonable n-value redistribution, which leads to the repressive nonradiation recombination and enhanced carrier transport. Moreover, the inserted Li2CO3 layer also improves the electrical conductivity of PEDOT:PSS and hinders indium ion diffusion from the PEDOT:PSS layer to the perovskite film, which inhibits exciton quenching and nonradiative recombination loss at the HTL/perovskite interface. Taking advantage of these merits, we have successfully fabricated efficient pure-blue PeLEDs with an external quantum efficiency of 6.2% at 472 nm and a luminance of 726 cd cm-2. The restraint of nonradiative recombination at the interface offers a promising approach for efficient pure-blue PeLEDs.

Cyanuric Acid-Functionalized Perovskite Nanocrystals toward Low Interface Impedance, High Environmental Stability, and Superior Electrochemiluminescence

Perovskite nanocrystals (PNs) have received much attention as luminescence materials in the field of electrochemiluminescence (ECL). However, as one key factor for determining the optoelectronic properties of the surface state of PNs, the surface passivation layer of PNs has enormous difficulty in simultaneously meeting the requirements of high ECL efficiency, conductivity, and stability. Herein, an effective surface modification strategy with cyanuric acid (CA) is used to solve such issue. As confirmed, the CA molecules are chemically anchored onto the surface of PNs via the Lewis interaction between π electrons of the triazine ring and the empty orbit of Pb2+. Benefiting from the above interaction, the electrochemical impedance of PNs is decreased greatly without the loss of light-emitting efficiency. Moreover, the stability of PNs under O2 exposure is improved by almost sixfold. These improvements are confirmed to be beneficial for enhancing the ECL behaviors of PNs under electrochemical operation. Upon cathode ECL driving conditions in aqueous media, the ECL intensity and efficiency of PNs are increased to 200 and 170%, respectively. This work provides a new modification strategy to holistically improve the ECL performance of PNs, which is instructive to exploring robust perovskite nanomaterials for electrochemical applications.