Phase-Changing Polymer Film for Smart Windows with Highly Adaptive Solar Modulation

Cellulose-based hydrogel simultaneously possessing solar and evaporative cooling performances for energy-saving window and personal thermal management

Thermochromic smart windows have been widely developed for building energy saving. However, most smart windows suffer from limited energy-saving performance, fixed phase transition temperature, and are not suitable for the temperature regulation needs of different application scenarios. Herein, a unique self-adaptive thermochromic hydrogel (HBPEC-PNA) with self-moisture-absorbing performance is reported that assembles solar energy cooling and evaporative heat dissipation. Importantly, the hydrogel shows excellent energy-saving performance by using the synergistic interaction of solar and evaporative cooling. The HBPEC-PNA hydrogel has an adjustable critical transition temperature (21.8-33.9 °C), a high solar modulation (ΔTsol = 78.90 %), and a high light transmittance (Tlum = 90.15 %). Interestingly, the hydrogel harvests water molecules from the surrounding air, enabling it to be directly used in circumstances without losing its ability to dynamically regulate solar energy transmission due to water loss. Furthermore, the indoor simulation experiments confirmed that the dual-cooling system can reduce 14.2 and 2.4 °C, respectively, compared to ordinary glass and conventional smart window. Dramatically, HBPEC-PNA hydrogel can be utilized to personal thermal management due to its superior cooling property. This work provides an attractive strategy that will contribute to the development of thermochromic materials with excellent temperature regulation ability.

Tunable thermoresponsive and stretchable hydrogel sensor based on hydroxypropyl cellulose for human motion/health detection, visual signal transmission and information encryption

Thermoresponsive hydrogels can be used as smart flexible sensors. However, the design and facile preparation of multifunctional thermoresponsive hydrogel sensors still face great challenges. Herein, a tunable thermoresponsive, thermochromic and stretchable poly(2-hydroxypropyl acrylate-co-acrylamide) (P(HPA-co-AM))/hydroxypropyl cellulose (HPC)/lithium chloride (LiCl) hydrogel with the networks constructed from non-covalent interaction was fabricated by photopolymerization. PHPA exhibits excellent thermoresponsiveness. HPC endows the hydrogel with outstanding mechanical performance and enhanced temperature-sensitivity. LiCl not only provides good conductivity, but also regulates the lower critical solution temperature (LCST) of the hydrogel. The hydrogel shows tensile strength up to 300 kPa and maximum strain up to 790 %. The LCST value of the hydrogel can be adjusted from 38 to 75 °C. Therefore, the thermoresponsive conductive hydrogel can realize the information encryption, and be used as sensor through strain and temperature changes in the external environment to realize the motion and health detection, and visual signal transmission. This work is expected to provide ideas for the next generation of smart multifunctional electronic skin and information encryption device.

Toughness and Thermoresponsive Hydrogel for Sandwich Smart Window with Adaptive Solar Modulation and Energy Saving

Thermochromic hydrogels with self-regulating solar transmittance are gaining increasing attention due to their significant potential in the fields of smart windows and energy conservation. Smart windows incorporating viscosity-tough hydrogels as an interlayer exhibit enhanced advantages in resisting external forces. In this study, a tough and thermoresponsive composite hydrogel was developed by incorporating poly(N-isopropylacrylamide) nanoparticles (PNIPAM NPs) and W-doped VO2 into a polyacrylamide-agar (PAM-Agar) double network hydrogel. Upon solar irradiation, thermochromism of PNIPAM NPs could regulate the visible light transmittance of the composite hydrogel and the photothermal effect of W-VO2 contributes to the optical regulation and NIR shielding. The smart window, with the composite hydrogel as an interlayer, demonstrates excellent optical modulation capabilities, with a luminous transmittance (Tum(20 °C)) of 86.81%, high light modulation (ΔTum = 78.89%), a high solar modulation (Tsol) of 83.59%, and a lower critical solution temperature (LCST) of 32.6 °C. The composite hydrogel's superior toughness (0.215 MJ/m3) also enhances the impact resistance of the smart window glass. Additionally, the adhesion between the hydrogel and the glass, with a maximum peeling force of up to 151 N/m (attributed to interactions between the amide groups and the silicon hydroxyl groups), was confirmed through a falling ball experiment. Moreover, the hydrogel exhibits a certain degree of thermal insulation, further promoting its utility in energy-saving applications. In conclusion, this study highlights the significant potential of such composite hydrogels in the development of smart windows for energy-efficient buildings.

A Comprehensive Review of Stimuli-Responsive Smart Polymer Materials-Recent Advances and Future Perspectives

Today, smart materials are commonly used in various fields of science and technology, such as medicine, electronics, soft robotics, the chemical industry, the automotive field, and many others. Smart polymeric materials hold good promise for the future due to their endless possibilities. This group of advanced materials can be sensitive to changes or the presence of various chemical, physical, and biological stimuli, e.g., light, temperature, pH, magnetic/electric field, pressure, microorganisms, bacteria, viruses, toxic substances, and many others. This review concerns the newest achievements in the area of smart polymeric materials. The recent advances in the designing of stimuli-responsive polymers are described in this paper.

Energy-Efficient Smart Window Based on a Thermochromic Hydrogel with Adjustable Critical Response Temperature and High Solar Modulation Ability

Thermochromic smart windows realize an intelligent response to changes in environmental temperature through reversible physical phase transitions. They complete a real-time adjustment of solar transmittance, create a livable indoor temperature for humans, and reduce the energy consumption of buildings. Nevertheless, conventional materials that are used to prepare thermochromic smart windows face challenges, including fixed transition temperatures, limited solar modulation capabilities, and inadequate mechanical properties. In this study, a novel thermochromic hydrogel was synthesized from 2-hydroxy-3-butoxypropyl hydroxyethyl celluloses (HBPEC) and poly(N-isopropylacrylamide) (PNIPAM) by using a simple one-step low-temperature polymerization method. The HBPEC/PNIPAM hydrogel demonstrates a wide response temperature (24.1-33.2 °C), high light transmittance (Tlum = 87.5%), excellent solar modulation (ΔTsol = 71.2%), and robust mechanical properties. HBPEC is a functional material that can be used to adjust the lower critical solution temperature (LCST) of the smart window over a wide range by changing the degree of substitution (DS) of the butoxy group in its structure. In addition, the use of HBPEC effectively improves the light transmittance and mechanical properties of the hydrogels. After 100 heating and cooling cycles, the hydrogel still has excellent stability. Furthermore, indoor simulation experiments show that HBPEC/PNIPAM hydrogel smart windows have better indoor temperature regulation capabilities than traditional windows, making these smart windows potential candidates for energy-saving building materials.

A thermo-responsive hydrogel for body temperature-induced spontaneous information decryption and self-encryption

A thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) hydrogel, exhibiting an interesting phenomenon of an opaque-transparent-opaque transition in the successive processes of heating and cooling, is reported. It is fabricated by means of both the porogenic effect of hydroxypropyl cellulose and the cononsolvency effect of PNIPAM in a mixed solvent of dimethyl sulfoxide and water. After being mildly triggered by body temperature, the hydrogel is used to spontaneously decrypt the quick response code within 4 min and then autonomously encrypts the code again within 10 min at room temperature. The mechanism for the transient transparency of hydrogels during the quenching process has been elucidated.

Title High Solar-Thermal Conversion Aerogel for Efficient Atmospheric Water Harvesting

The shortage of freshwater is a global problem, however, the gel that can be used for atmospheric water harvesting (AWH) in recent years studying, suffer from salt leakage, agglomeration, and slow water evaporation efficiency. Herein, a solar-driven atmospheric water harvesting (SAWH) aerogel is prepared by UV polymerization and freeze-drying technique, using poly(N-isopropylacrylamide) (PNIPAm), hydroxypropyl cellulose (HPC), ethanolamine-decorate LiCl (E-LiCl) and polyaniline (PANI) as raw materials. The PNIPAm and HPC formed aerogel networks makes the E-LiCl stably and efficiently loaded, improving the water adsorption-desorption kinetics, and PANI achieves rapid water vapor evaporation. The aerogel has low density ≈0.12-0.15 g cm-3, but can sustain a weight of 1000 times of its own weight. The synergist of elements and structure gives the aerogel has 0.46-2.95 g g-1 water uptake capability at 30-90% relative humidity, and evaporation rate reaches 1.98 kg m-2 h-1 under 1 sun illumination. In outdoor experiments, 88% of the water is harvesting under natural light irradiation, and an average water harvesting rate of 0.80 gwater gsorbent -1 day-1. Therefore, the aerogel can be used in arid and semi-arid areas to collect water for plants and animals.

Scalable Photochromic Film for Solar Heat and Daylight Management

The adaptive control of sunlight through photochromic smart windows could have a huge impact on the energy efficiency and daylight comfort in buildings. However, the fabrication of inorganic nanoparticle and polymer composite photochromic films with a high contrast ratio and high transparency/low haze remains a challenge. Here, a solution method is presented for the in situ growth of copper-doped tungsten trioxide nanoparticles in polymethyl methacrylate, which allows a low-cost preparation of photochromic films with a high luminous transparency (luminous transmittance Tlum = 91%) and scalability (30 × 350 cm2 ). High modulation of visible light (ΔTlum = 73%) and solar heat (modulation of solar transmittance ΔTsol = 73%, modulation of solar heat gain coefficient ΔSHGC = 0.5) of the film improves the indoor daylight comfort and energy efficiency. Simulation results show that low-e windows with the photochromic film applied can greatly enhance the energy efficiency and daylight comfort. This photochromic film presents an attractive strategy for achieving more energy-efficient buildings and carbon neutrality to combat global climate change.

Freezing-resistant poly(N-isopropylacrylamide)-based hydrogel for thermochromic smart window with solar and thermal radiation regulation

Adaptive regulation of solar and thermal radiation by windows in diverse (hot and cold) climates is essential to reduce building energy consumption. However, conventional hydrogel-based thermochromic smart windows lack thermal radiation regulation, and have difficulty to combine high solar regulation with excellent freezing resistance. It is challenging to integrate the above performance into one hydrogel-based thermochromic window. Here, we firstly prepared poly(N-isopropylacrylamide-co-N, N-dimethylacrylamide)/ethylene glycol (PNDE) hydrogels with tunable and excellent freezing resistance (below -100 °C) by adding the anti-freezing agent ethylene glycol, and assembled PNDE hydrogels, polyvinylidene fluoride and polymethyl methacrylate-silver nanowires panels into a freezing-resistant smart window with solar and thermal radiation regulation (STR). PNDE hydrogels had an excellent thermochromic performance with luminous transmittance (Tlum) of 89.3 %, solar regulation performance (ΔTsol) of 80.7 % and tunable phase change temperature (τc, 22-44 °C). The assembled STR window showed high Tlum of 68.2 %, high ΔTsol of 62.6 %, suitable τc of ∼30 °C and freezing resistance to low temperature of -27 °C. Moreover, the different thermal emissivity (0.94 and 0.68) of the two sides of the STR window gave it the ability of radiative cooling in hot climates and warm-keeping in cold climates. Compared to the conventional thermochromic windows, the STR window promotes heat dissipation in hot conditions while reduces heat loss in cold conditions and is applicable to diverse climates, which is a promising energy-saving device for reducing building energy consumption.

Engineering Self-Adaptive Multi-Response Thermochromic Hydrogel for Energy-Saving Smart Windows and Wearable Temperature-Sensing

Buildings account for ≈40% of the total energy consumption. In addition, it is challenging to control the indoor temperature in extreme weather. Therefore, energy-saving smart windows with light regulation have gained increasing attention. However, most emerging base materials for smart windows have disadvantages, including low transparency at low temperatures, ultra-high phase transition temperature, and scarce applications. Herein, a self-adaptive multi-response thermochromic hydrogel (PHC-Gel) with dual temperature and pH response is engineered through "one-pot" integration tactics. The PHC-Gel exhibits excellent mechanical, adhesion, and electrical conductivity properties. Notably, the low critical solubility temperature (LCST) of PHC-Gel can be regulated over a wide temperature range (20-35 °C). The outdoor practical testing reveals that PHC-Gel has excellent light transmittance at low temperatures and radiation cooling performances at high temperatures, indicating that PHC-Gel can be used for developing energy-saving windows. Actually, PHC-Gel-based thermochromic windows show remarkable visible light transparency (Tlum ≈ 95.2%) and solar modulation (△Tsol ≈ 57.2%). Interestingly, PHC-Gel has superior electrical conductivity, suggesting that PHC-Gel can be utilized to fabricate wearable signal-response and temperature sensors. In summary, PHC-Gel has broad application prospects in energy-saving smart windows, smart wearable sensors, temperature monitors, infant temperature detection, and thermal management.

Artificial Skin with Patterned Stripes for Color Camouflage and Thermoregulation

Chameleons are famous for their quick color changing abilities, and it is commonly assumed that they do this for camouflage. However, recent reports revealed that chameleons also change color for body temperature regulation. Inspired by the structure of the panther chameleon's skin, a stripe-patterned poly(N-isopropylacrylamide) (PNIPAM) and polyacrylamide (PAM) hydrogel film with a laminated structure is fabricated in this work; thus, both camouflage and thermoregulation can be achieved through controlling Vis and NIR light effectively. For the PNIPAM stripe, the upper layer is the native PNIPAM hydrogel and the lower layer is the carbon nanotube-composited PNIPAM hydrogel. Thus, the PNIPAM stripe is capable of reaching 28 °C at a low environmental temperature (12 °C) and a low radiation intensity (20 mW cm-2), while preventing the body temperature from rising by changing to white under a strong radiation intensity (100 mW cm-2). For the PAM stripe, the upper layer combines colloidal photonic crystals and displays a tunable structural color by stretching, and the lower layer is mixed with PNIPAM microgels for thermal regulation. Through the fabrication of multifunctional patterns, the film can achieve both dynamic structural color and thermoregulation by precisely controlling solar radiation absorption, scattering, and reflection. More importantly, in the stripe-patterned system, the shrinkage of the PNIPAM stripes can effectively trigger the elongation of the PAM stripe, which endows the structural color changing process to be self-powered completely. The performances show that the stripe-patterned film may have potential applications in intelligent coatings, especially in areas with large temperature differences during the day such as high plains.