NiMo-MOF-Derived Carbon-Armored Ni4Mo Alloy of an Interwoven Nanosheet Structure as an Outstanding pH-Universal Catalyst for Hydrogen Evolution Reaction at High Current Densities

Efficient dual-phase PtNiCuMnMo high-entropy alloy electrocatalyst for alkaline hydrogen evolution reaction

The realisation of high-performance cathodic hydrogen evolution reaction (HER) is of considerable importance for the development of the nascent hydrogen economy. Herein, we develop a dual-phase PtNiCuMnMo high-entropy alloy (HEA) showing excellent alkaline HER performance with an overpotential of as low as 44 mV at a current density of 10 mA/cm2. Additionally, the PtNiCuMnMo HEA catalyst maintains stability after 72 h at a current density of 200 mA/cm2. This catalyst comprises two phases, resulting in enhanced activity of reaction sites, accelerated electron transfer and thereby excellent catalytic performance. The excellent HER performance of the PtNiCuMnMo HEA catalyst is verified based on its adsorption and charge transfer energies. Furthermore, the prepared PtNiCuMnMo HEA catalyst considerably outperforms commercial Pt/C electrodes. Overall, this study develops a dual-phase HEA electrocatalyst with remarkable activity for hydrogen production.

Enhanced Oxygen Evolution Reaction Performance of NiMoO4/Carbon Paper Electrocatalysts in Anion Exchange Membrane Water Electrolysis by Atmospheric-Pressure Plasma Jet Treatment

NiMoO4 was grown on carbon paper (CP) by a hydrothermal method. A rapid and high-temperature atmospheric-pressure plasma jet (APPJ) process was used to generate more oxygen-deficient NiMoO4 on the CP surface to serve as an electrode material for the oxygen evolution reaction (OER). After 60 s of APPJ treatment, the overpotential of the electrode at 100 mA/cm2 decreased to 790 mV and that at 10 mA/cm2 decreased to 368 mV. Additionally, the charge transfer resistance decreased from 2.8 to 1.2 Ω, indicating that APPJ treatment effectively reduced the electrode overpotential and impedance. The effect of NiMoO4/CP/APPJ-60 s on the anion exchange membrane water electrolysis (AEMWE) system was also tested. At a system temperature of 70 °C and current density of 100 mA/cm2, the energy efficiency reached 95.1%, and the specific energy consumption decreased from 4.02 to 3.83 kWh/m3. These results demonstrate that the APPJ-treated NiMoO4/CP electrode can effectively enhance the OER performance in water electrolysis and improve the energy efficiency of the AEMWE system. This approach shows promise in replacing precious metal electrodes, thereby potentially reducing the cost and providing an environmentally friendly alternative.

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL-1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL-1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

Metal-organic-framework derived NiS2/C hollow structures for enhanced polysulfide redox kinetics in lithium-sulfur batteries

To cope with the shuttling of soluble lithium polysulfides in lithium-sulfur batteries, confinement tactics, such as trapping of sulfur within porous carbon structures, have been extensively studied. Although performance has improved a bit, the slow polysulfide conversion inducing fast capacity decay remains a big challenge. Herein, a NiS2/carbon (NiS2/C) composite with NiS2 nanoparticles embedded in a thin layer of carbon over the surface of micro-sized hollow structures has been prepared from Ni-metal-organic frameworks. These unique structures can physically entrap sulfur species and also influence their redox conversion kinetics. By improving the reaction kinetics of polysulfides, the NiS2/carbon@sulfur (NiS2/C@S) composite cathode with a suppressed shuttle effect shows a high columbic efficiency and decent rate performance. An initial capacity of 900 mAh g-1 at the rate of 1 C (1 C = 1675 mA g-1) and a low-capacity decline rate of 0.132% per cycle after 500 cycles are obtained, suggesting that this work provides a rational design of a sulfur cathode.

A Stabilized Li-Metal Anode with a Ti-Based Metal-Organic Framework Electronic Shield

The insufficient cyclic efficiency and poor safety have prohibited the commercial applications of the lithium-metal anode because of its uncontrolled dendrite growth at the surface. A mechanically stable and highly ionic conductive solid electrolyte interphase (SEI) holds great promise to address the issues. Herein, a viable surface engineering approach is proposed for stabilizing the Li anode via a scalable artificial method. The surface of Li metal is functionalized by constructing a mechanically tough and electron-insulating metal-organic framework (MOF) of the MIL-125(Ti) layer. In-situ optical microscopy reveals its crucial role in inhibiting dendritic Li growth. Because of the intrinsic insulativity and highly ordered micropores of MIL-125(Ti), the Li+ ions acquire electrons under the coating layer, resulting in a uniform and dense Li deposition behavior. The symmetric cell of the MOF-modified Li electrode delivers a long life span of 2000 h with an overpotential of less than 20 mV at 0.5 mA cm-2. When paired with the same MOF-derived sulfur cathode, decent cycling retention is available as well. This work demonstrates a feasible strategy for the development of a stable Li-metal anode with alleviative dendritic growth.

Modulating Charge Transfer Pathways to Enhance Photocatalytic Performance of the Metal-Organic Layer Nanosheet

Two-dimensional metal-organic layer (MOL) nanosheets, as nonhomogeneous catalysts, show better optical activity in the field of photocatalysis due to their unique structural advantages. Current research focuses on how to modify the structure of 2D nanosheets by means of crystal engineering to modulate the intralayer electron transfer pathway and systematically investigate the impacts of size effect and electron transfer pathway on the energy utilization efficiency of crystalline materials. In the present work, a triple lophine-derived ligand was designed and prepared, which exhibits a large π-conjugation system and multiple D-A (D: donor, A: acceptor) electron transfer pathways. 2D MOL constructed with Cd ions can be exfoliated by physical sonication to obtain double-walled 2D MOL nanosheets. Compared with the bulk crystalline material, the 2D nanosheets exhibit better photovoltaic properties. Benefiting from the excellent structural advantages, 2D MOL nanosheets could be used as photocatalysts for a variety of aerobic oxidation reactions under mild conditions (10 W white LED, room temperature), such as the trifluoromethylation of coumarins, the synthesis of benzimidazole derivatives from aromatic diamines and aromatic aldehydes, and the preparation of 2,4,6-triarylpyridine derivatives, all with high conversion rates and selectivity (yield typically greater than 88%). The related results illustrate that the introduction of the photoactive triple-lophine unit into 2D MOL nanosheets can effectively modulate the electron transport mode and enhance energy utilization, which provides a new research idea for the development of nonhomogeneous photocatalysts aimed at the applications of visible light-driven organic conversion.