Biomimetic Ag/ZnO@PDMS Hybrid Nanorod Array-Mediated Photo-induced Enhanced Raman Spectroscopy Sensor for Quantitative and Visualized Analysis of Microplastics

Mechanically Flexible, Large-Area Fabrication of Three-Dimensional Dendritic Au Films for Reproducible Surface-Enhanced Raman Scattering Detection of Nanoplastics

The escalating crisis of nanoplastic pollution in water and food products demands the development of novel methodologies for detection and recycling. Despite various techniques available, surface-enhanced Raman scattering (SERS) is emerging as a highly efficient technique for the trace detection of micro/nanoplastics. However, the development of highly reproducible and stable, flexible SERS substrates that can be used for sensitive detection in environmental medium remains a challenge. Here, we report a fabrication of large-area, three-dimensional (3D), and highly flexible SERS substrate based on porous dendritic Au films onto a flexible indium tin oxide (ITO) substrate via facile, thermal evaporation of Au over the vacuum-compatible deep eutectic solvent (DES)-coated glass substrate and subsequent direct transfer process. The as-fabricated 3D dendritic Au/ITO flexible substrates can be used for ultrasensitive SERS detection of crystal violet (CV) as probe analyte molecules with the limit of detection (LOD) as low as 6.4 × 10-15 M, with good signal reproducibility (RSD of 11.3%). In addition, the substrate showed excellent sensitivity in detecting nanoplastics such as poly(ethylene terephthalate) (200 nm) and polystyrene (100 nm) with LODs reaching up to 0.051 and 8.2 μg/mL, respectively. This work provides a facile approach for the preparation of highly flexible plasmonic substrates, showing great potential for the SERS detection of a variety of environmental pollutants.

NiO/AgNPs nanowell enhanced SERS sensor for efficient detection of micro/nanoplastics in beverages

The ubiquity of plastic products has led to an increased exposure to micro and nano plastics across diverse environments, presenting a novel class of pollutants with substantial health implications. Emerging research indicates their capacity to infiltrate human organs, posing risks of tissue damage and carcinogenesis. Given the prevalent consumption of beverages as a primary vector for these plastics' entry into the human system, there is an imperative need for the advancement of precise detection methodologies in liquids. In this study, we introduce a substrate comprising a Nickel Oxide (NiO) nanosheet array decorated with Silver Nanoparticles (AgNPs) for the Surface-Enhanced Raman Spectroscopy (SERS) analysis of micro//nano plastics. This configuration, leveraging a unique nanowell architecture alongside silver plasmonic enhancement, demonstrates unparalleled sensitivity and repeatability in signal, facilitating the accurate quantification of these contaminants. Through the application of a portable Raman apparatus, this study successfully identifies prevalent micro/nano plastics including polystyrene (PS), polyethylene (PE), and polypropylene (PP), achieving detection sensitivities of 5 μg/mL, 25 μg/mL, and 25 μg/mL, respectively. Moreover, the substrate's efficacy extends to the detection of PS within commonly consumed beverages such as water, milk, and liquor with sensitivities of 25 μg/mL, 50 μg/mL, and 50 μg/mL, respectively. These findings highlight the substrate's potential as an expedient and effective sensor for the real-time monitoring of micro/nano plastic pollutants.

Realizing Square-Ordered Nanopillars with a 0.1-Tera-Density through a Superimposed Masking Strategy for Advanced Surface-Enhanced Raman Spectroscopy

Despite widespread interest in nanoscale pillar structures for various optical devices, including solar cells, photonic crystal lasers, and sensors, the critical challenges for mass production are the high equipment costs and limited scalability of traditional manufacturing methods. To overcome these hurdles, this study develops a simple and highly scalable etch-mask superposition technique based on thermally assisted nanotransfer printing (T-nTP) of Cr line patterns. The orthogonal superposition of linear Cr mask patterns creates double-height cross-point arrays that effectively and selectively protect the underlying SiO2 during subsequent reactive ion etching. This process generates highly uniform nanoscale pillar arrays with an extremely high density of 0.1 tera-pillars per square inch, eliminating the need for high-cost patterning platforms. As an exemplary application, we demonstrate the use of these perfectly ordered nanopillar arrays as high-performance surface-enhanced Raman scattering (SERS) sensors through the deposition of noble metal films on the nanopillar surface. These nanopillars enable exceptionally uniform SERS intensity with spot variations of less than 7% in methylene blue (MB) measurements. Additionally, they exhibit sensitive detections and accurate quantification for thiabendazole (TBZ) at concentrations as low as 10-8 M, along with multicycle reusability without noticeable degradation, owing to the outstanding robustness of the SiO2 nanopillars.

Integration of bifunctional silver dendrite membranes with surface-enhanced Raman scattering for sensitive detection of polystyrene microplastics in aquatic environments

Microplastics (MPs) are emerging environmental pollutants that are present in aquatic environments and accumulate within the food chain, posing significant threats to human health. Over 8 million tons of MPs enter these ecosystems annually. However, existing rapid qualitative and quantitative analytical methods for trace MPs are limited, hindering comprehensive research on their impact in water environments. This study presents a novel composite membrane with both adsorption and filtration functions, integrated with surface enhanced-Raman scattering technology for detecting trace MPs in water. The silver dendrites, modified with n-hexanethiol and loaded onto filter paper, facilitate enhanced enrichment and simultaneous sensitive detection of MPs. The composite membrane exhibited excellent retention rates for standard polystyrene (PS) MPs of various sizes (200, 500, and 1000 nm), achieving high enrichment efficiency. Sensitive detection was realized with a linear response in a concentration range of 0.01 to 0.5 g/L, yielding optimal enhancement factors exceeding 2.92 × 103, enabling detection at μg/L levels. Recovery rates for PS in spiked environmental water samples ranged from 96.86 % to 102.96 %. This innovative method offers a promising approach for the rapid and sensitive detection of trace MPs in aquatic environments, contributing significantly to the assessment of MPs pollution.

A Scalable Synthesis of Ag Nanoporous Film As an Efficient SERS-Substrates for Sensitive Detection of Nanoplastics

Nanoplastics pollution has led to a severe environmental crisis because of a large accumulation of these smaller nanoplastic particles in the aquatic environment and atmospheric conditions. Detection of these nanoplastics is crucial for food safety monitoring and human health. In this work, we report a simple and eco-friendly method to prepare a SERS-substrate-based nanoporous Ag nanoparticle (NP) film through vacuum thermal evaporation onto a vacuum-compatible deep eutectic solvent (DES) coated growth substrate for quantitative detection of nanoplastics in environmental samples. The nanoporous Ag NP films with controlled pores were achieved by the soft-templating role of DESs over the growth substrate, which enabled the self-assembly of deposited Ag NPs over the surface of DES. The optimized nanoporous Ag substrate provides high sensitivity in the detection of analyte molecules, crystal violet (CV), and rhodamine 6G (R6G) with a limit of detection (LOD) up to 1.5 × 10-13 M, excellent signal reproducibility, and storage stability. Moreover, we analyzed quantitative SERS detection of polyethene terephthalate (PET, size of 200 nm) and polystyrene (PS, size of 100 nm) nanoplastics with an LOD of 0.38 and 0.98 μg/mL, respectively. In addition, the SERS substrate efficiently detects PET and PS nanoplastics in real environmental samples, such as tap water, lake water, and diluted milk. The enhanced SERS sensing ability of the proposed nanoporous Ag NP film substrate holds immense potential for the sensitive detection of various nanoplastic contaminants present in environmental water.

A Comprehensive Bibliometric Study in the Context of Chemical Hazards in Coffee

The research aimed to carefully review the chemical hazards linked to the coffee production chain to analyse the risks and opportunities for consumers and the environment, as well as identify potential knowledge gaps. The Scopus database was consulted from 1949 to April 2024 to conduct a bibliometric analysis. As a result, 680 articles were analysed. Results indicated a significant increase in research activity since 2015. China, Brazil, and the USA were the leading countries in scientific production and collaborations. The most prolific journals in this field were Chemosphere, Science of the Total Environment, Food Chemistry, Journal of Agricultural and Food Chemistry, and Journal of Environmental Management, all of which are in the first quartile. The word analysis revealed two main themes: the first focuses on the chemical hazards of coffee and their impact on health, while the second explores the waste generated during coffee production and its potential for reuse. The topics covered in the research include the composition of coffee, associated chemical hazards, possible health risks, and ways to reuse waste for environmental protection. Future research should concentrate on optimising techniques and processes to ensure quality, safety, and sustainability.

Quantitative detecting low concentration polystyrene nanoplastics in aquatic environments via an Ag/Nb2CTx (MXene) SERS substrate

In this study, the plasmonic Ag nanoparticles (Ag NPs) were uniformly anchored on the high conductivity Nb2CTx (MXene) nanosheets to construct an Ag/Nb2CTx substrate for surface-enhanced Raman spectroscopy (SERS) detection of polystyrene (PS) nanoplastics. The KI addition (0.15 mol/L), the volume ratio between substrate colloid and nanoplastic suspension (2:1), and the mass ratio of Nb2CTx in substrate (14%) on SERS performance were optimized. The EM hot spots of Ag/Nb2CTx are significantly enlarged and enhanced, elucidated by FDFD simulation. Then, the linear relationship between the PS nanoplastics concentration with three different sizes (50, 300, and 500 nm) and the SERS intensity was obtained (R2 > 0.976), wherein, the detection limit was as low as 10-4 mg/mL for PS nanoplastic. Owing to the fingerprint feature, the Ag/Nb2CTx-14% substrate successfully discerns the mixtures from two-component nanoplastics. Meanwhile, it exhibits excellent stability of PS nanoplastics on different detection sites. The recovery rates of PS nanoplastics with different sizes in lake water ranged from 94.74% to 107.29%, with the relative standard deviation (RSD) ranging from 2.88% to 8.30%. Based on this method, the expanded polystyrene (EPS) decomposition behavior was evaluated, and the PS concentrations in four water environments were analyzed. This work will pave the way for the accurate quantitative detection of low concentration of nanoplastics in aquatic environments.

Synergistic enhancement mediated sensitive SERS-based immunoassay of PSA using versatile PDMS@AgNPs@ZIF-67 biomimetic substrates

Among various biomimetic polymer materials, polydimethylsiloxane (PDMS) stands out as an ideal matrix for surface-enhanced Raman scattering (SERS) due to its unique intrinsic Raman signal and tenacity. In order to realize the precise detection of prostate-specific antigen (PSA), we proposed a sandwich-type SERS-active immunostructure composed of PDMS@silver nanoparticles (Ag NPs)@ZIF-67 biomimetic film as the immunosubstrate and gold nanorods (Au NRs) as immunoprobes. Due to the synergistic effect of electromagnetic enhancement facilitated by biomimetic surfaces and chemical enhancement achieved by ZIF-67, this structure enabled an ultrasensitive and selective detection of PSA across a broad range from 10-3 to 10-9 mg/mL. The achieved limit of detection was as low as 3.0 × 10-10 mg/mL. Particularly, the intrinsic Raman signal of PDMS matrix at 2905 cm-1 was employed as a potential internal standard (IS) in the detection, achieving a high coefficient of determination (R2) value of 0.996. This multifunctional SERS substrate-mediated immunoassay holds vast potential for early diagnosis of prostate cancer, offering promising prospects for clinical applications.

Characterization of Buried Interfaces of Silicone Materials in Situ to Understand Their Fouling-Release, Antifouling, and Adhesion Properties

Poly(dimethylsiloxane) (PDMS) has numerous excellent properties and is extensively used as the main component of many silicone products in a variety of research fields and practical applications such as biomedical materials, aviation, construction, electronic devices, and automobiles. Interfacial structures of PDMS and other components in silicone systems are important for such research and applications. It is difficult to probe interfacial molecular structures of buried solid-liquid and solid-solid interfaces of silicone materials due to the lack of appropriate analytical tools. In this feature article, we presented our research on elucidating the molecular structures of PDMS as well as other additives in silicone samples at buried interfaces in situ at the molecular level using a nonlinear optical spectroscopic technique, sum frequency generation (SFG) vibrational spectroscopy. SFG was applied to study various PDMS surfaces in liquid environments to understand their fouling-release and antifouling activities. SFG has also been used to study buried solid-solid interfaces between silicone adhesives and polymers, elucidating the molecular adhesion mechanisms. Our SFG studies provide important knowledge on interfacial structure-function relationships of silicone materials, helping the design and development of silicone materials with improved properties through optimization of silicone interfacial structures.

Antifouling applications and fabrications of biomimetic micro-structured surfaces: A review

BACKGROUND

Since the inception of the term "Biomimetics" in 1991, the concept of utilizing natural solutions or deriving inspiration from nature to address contemporary engineering challenges has gained significant attention within the scientific community. Organisms, in order to thrive in harsh environments, have evolved a wide range of micro/nanostructured surfaces, which serve as a rich source of inspiration for the development of artificial micro/nano-structured surfaces. These natural adaptations provide valuable insights and novel pathways for fabricating such surfaces.

AIM

To conclude recent advances in micro/nano-structured surfaces from four aspects: biomimetic micro-structured surfaces of plants and animals, properties and applications of biomimetic surfaces, methods of preparations, and their limitation.

KEY SCIENTIFIC CONCEPTS

Artificial micro/nano-structured surfaces inspired by animals and plants are classified and demonstrated according to their living environment. The performances, principles and preparation techniques of natural superhydrophobic surfaces, slippery liquid-infused porous surfaces (SLIPS), anisotropic surfaces, etc. are described in detail. Moreover, the pros and cons of each preparation measures are compared and the challenges developing large-scale, cost-effective surface microstructure preparation processes are pointed out. In the end, the development trends of artificial micro/nano-structured surface are forecasted.

Dextran-based antibacterial hydrogel-derived fluorescent sensors for the visual monitoring of AgNPs

The unpredictable release behavior of metal nanoparticles/metal ions from metal nanoparticle-loaded hydrogels, without a suitable in situ detection method, is resulting in serious cytotoxicity. To optimize the preparation and design of antibacterial hydrogels for in situ detection of metal nanoparticles, an in-situ detection platform based on the fluorescence signal change caused by the potential surface energy transfer of silver nanoparticles (AgNPs) and carbon dots (CD) through silver mirror reaction and Schiff base reaction was established. The antimicrobial test results show that the composite antimicrobial hydrogel, with lower dosages of AgNPs and CD, exhibited a higher inhibition rate of 99.1 % against E. coli and 99.8 % against S. aureus compared to the single antimicrobial component. This suggests a potential synergistic antimicrobial activity. Furthermore, the fluorescence detection platform was established with a difference of <3 μg between detected values and actual values over a period of 72 h. This demonstrates the excellent in situ detection capability of the hydrogel in antimicrobial-related applications.

Ionic Liquid-Assisted Thermal Evaporation of Bimetallic Ag-Au Nanoparticle Films as a Highly Reproducible SERS Substrate for Sensitive Nanoplastic Detection in Complex Environments

Nanoplastic particles are emerging as an important class of environmental pollutants in the atmosphere that have adverse effects on our ecosystems and human health. While many methods have been developed to quantitatively detect nanoplastics; however, sensitive detection at low concentrations in a complex environment remains elusive. Herein, we demonstrate a greener method to fabricate a surface-enhanced Raman spectroscopy (SERS) substrate consisting of self-assembled plasmonic Ag-Au bimetallic nanoparticle (NP) films for quantitative SERS detection of nanoplastics in complex media. The self-assembly of Ag-Au bimetallic NPs was achieved through thermal evaporation onto a vapor-phase compatible ionic liquid based on deep eutectic solvent over the growth substrate. The finite-difference time-domain simulation revealed that the localized field enhancement is strong in the gaps, which generate uniform SERS "hotspots" in the obtained substrate. Benefiting from highly accessible SERS "hotspots" at the gaps, the SERS substrate exhibits excellent sensitivity for detecting crystal violet with a limit of detection (LOD) as low as 10-14 M and excellent reproducibility (RSD of 5.8%). The SERS substrate is capable of detecting PET nanoplastics with LOD as low as 1 μg/mL and about 100 μg/mL in real samples such as tap water, lake water, diluted milk, and wine. Moreover, we also validated the feasibility of the designed SERS substrate for the practical detection of PET nanoplastics collected from commercial drinking water bottles, and it showed great potential applications for sensitive detection in actual environments.

ZnO Nanocages Decorated with Au@AgAu Yolk-Shell Nanomaterials for SERS-Based Detection of Hyperuricemia

Surface-enhanced Raman scattering (SERS) is widely recognized as a highly sensitive technology for chemical detection and biological sensing. In SERS-based biomedical applications, developing highly efficient sensing platforms based on SERS plays a pivotal role in monitoring disease biomarker levels and facilitating the early detection of cancer biomarkers. Hyperuricemia, characterized by abnormally high concentrations of uric acid (UA) in the blood, was associated with a range of diseases, such as gouty arthritis, heart disease, and acute kidney injury. Recent reports have demonstrated the correlation between UA concentrations in blood and tears. In this work, we report the fabrication of SERS substrates utilizing ZnO nanocages and yolk-shell-structured plasmonic nanomaterials for the noninvasive detection of UA in tears. This innovative SERS substrate enables noninvasive and sensitive detection of UA to prevent hyperuricemia-related diseases.