Engineering Rich-Cation Vacancies in CuCo2O4 Hollow Spheres with a Large Surface Area Derived from a Template-Free Approach for Ultrahigh Capacity and High-Energy Density Supercapacitors

A chromium cobaltite based ternary composite as an efficient electrode material for hybrid supercapacitors with theoretical investigation

To cater to the growing demand for advanced energy storage devices, the development of efficient electrode materials with brilliant electrochemical response is highly required. Battery-like materials have gained wide research attention as effective electrode materials for hybrid supercapacitors (HSCs). In this account, chromium cobaltite (CrCo2O4) has been synthesized via a facile hydrothermal route. The structural and electronic properties of CrCo2O4 have been investigated using DFT. Activated carbon (AC) and polypyrrole (PPY) have been introduced to hybridize with CrCo2O4 to enhance its electrochemical performance. The high conductivity of PPY, along with the high surface area and excellent cycling stability of AC, synergistically boosts the performance of CrCo2O4. The ternary composite CrCo2O4/AC/PPY exhibited a higher capacitance of 991.25 F g-1 than the pristine CrCo2O4 (301.53 F g-1) at 5 mV s-1. The composite also displayed high cycling stability with 84.25% capacitive retention after ten thousand cycles. The composite also delivered a lower charge transfer resistance (0.36 Ω), which resulted in better charge transfer. A HSC with CrCo2O4/AC/PPY as the positive electrode and MnO2/AC as the negative electrode was fabricated that delivered a high energy density of 97.77 W h kg-1 and power of 1.6 kW kg-1. A high capacitive retention of 76.75% was observed for ten thousand cycles. The practicality of the prepared material was tested by connecting three hybrid cells in series to illuminate a panel of 57 LEDs. The panel was able to glow for 51 minutes. The outstanding performance of the composite reveals the excellent possibility for application in high-performance advanced hybrid SCs.

Ferroelectric modulation of CuCo2O4 nanorods for controllable alkaline water electrolysis

As a technology for emerging environmental applications, water electrolysis is a significant approach for producing clean hydrogen energy. In this work, we used an efficacious piezoelectric method to significantly improve the catalytic water splitting activity without affecting the morphology as well as the components by altering the bulk charge separation state inside the material. The obtained CuCo2O4 nanorods were treated under a corona polarization apparatus, which significantly enhanced ferroelectricity relative to that before the polarization increasing the physical charge separation and piezoelectric potential energy, enhancing the green hydrogen production. The polarized CuCo2O4 nanorods exhibit excellent water electrolysis performance under alkaline conditions, with hydrogen evolution overpotential of 78.7 mV and oxygen evolution overpotential of 299 mV at 10 mA cm-2, which is much better than that of unpolarized CuCo2O4 nanorods. Moreover, the Tafel slopes of polarized CuCo2O4 nanorods are 86.9 mV dec-1 in the HER process and 73.1 mV dec-1 in the OER process, which are much lower than commercial catalysts of Pt/C (88.0 mV dec-1 for HER) or RuO2 (78.5 mV dec-1 for OER), proving faster kinetic on polarized CuCo2O4 nanorods due to their higher electroconductibility and intrinsic activity. In particular, polarized CuCo2O4 nanorods are identified as promising catalysts for water electrolysis with robust stability, offering outstanding catalytic performance and excellent energy efficiency.

Rational Design of Nanosheet Array-Like Layered-Double-Hydroxide-Derived NiCo2O4 In Situ Grown on Reduced-Graphene-Oxide-Coated Nickel Foam for High-Performance Solid-State Supercapacitors

The investigation of high-performance supercapacitors is essential for accelerating the development of energy storage devices. In this work, a 3D hierarchical nanosheet array-like nickel cobaltite/reduced graphene oxide/nickel foam composite (NiCo2O4/rGO/NF) was assembled via an aqueous coprecipitation-hydrothermal strategy assisted by citric acid. Benefiting from a NiCo layered-double-hydroxide precursor with an atomic-level lattice confinement effect of metal ions and effective hybridization with rGO, the NiCo2O4/rGO/NF composite is featured as thin NiCo2O4 nanosheets (∼113.6 nm × 11.2 nm) composed of NiCo2O4 nanoparticles (∼10.9 nm) vertically staggered on the surface of a rGO-modified NF skeleton, leading to high surface area, abundant mesoporous structure, and active site exposure. The as-obtained NiCo2O4/rGO/NF was directly used as a binder-free integrated electrode for supercapacitors, achieving an excellent specific capacitance of 2863.4 F g-1 (1503.3 C g-1) at 1 A g-1, a superior rate performance of 2335.2 F g-1 at 20 A g-1, and a stability retention of 91.7% after 5000 cycles. More impressively, a solid-state asymmetric supercapacitor assembled by the present NiCo2O4/rGO/NF integrated electrode as the positive electrode and commercial activated carbon as the negative electrode achieved a high energy density of 69.2 Wh kg-1 at a power density of 800 W kg-1, and the energy density at a peak power density of 20004 W kg-1 still remained at 48.9 Wh kg-1, also showing a good cycling stability of 87.2% retention over 10000 cycles. The present facile synthesis strategy of the as-obtained NiCo2O4/rGO/NF nanosheet array composite can be used for the design and construction of many other transition-metal oxide/graphene/NF composite materials with excellent structural stability and performance in energy storage and other related areas.

Multifunctional sulfur doping in cobalt-based materials for high-energy density supercapacitors

In this study, S-CCO@Co(OH)2('CCO' representing CuCo2O4/Cu2O; 'S-'representing sulfur doping) was synthesized by hydrothermal method followed by electrodeposition. The multiple effects of S doping were studied by S doping and constructing 3D core-shell structure. S doping induced the reduction of Cu2+and Co3+to Cu+and Co2+, respectively. Also, S partially replaces O and creates oxygen vacancies, which increases a number of active sites for the redox reaction enhancing the redox reaction activity. After the electrodeposition, S-Co bond is formed between the Co(OH)2shell and the S-CCO core, which suggests a synergistic effect between S doping and core-shell structure. The formation of S-Co bond is conducive to electron and ion transport, thus improving electrochemical performance. After modification, the specific capacitance of S-CCO@Co(OH)2is 4.28 times higher than CCO, up to 1730 Fg-1. Furthermore, the assembled S-CCO@Co(OH)2//activated carbon supercapacitor exhibits an energy density of 83.89 Whkg-1at 848.81 Wkg-1and a retention rate of 98.48% after 5000 charge and discharge cycles. Therefore, S doping and its mutual effect with the utilization of the core-shell structure considerably enhanced the electrochemical performance of the CCO-based electrodes, endowing its potential in further application.