Two-Dimensional Porous Micro/Nano Metal Oxides Templated by Graphene Oxide

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials

This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.

Recent advances in the fabrication of 2D metal oxides

Atomically thin two-dimensional (2D) metal oxides exhibit unique optical, electrical, magnetic, and chemical properties, rendering them a bright application prospect in high-performance smart devices. Given the large variety of both layered and non-layered 2D metal oxides, the controllable synthesis is the critical prerequisite for enabling the exploration of their great potentials. In this review, recent progress in the synthesis of 2D metal oxides is summarized and categorized. Particularly, a brief overview of categories and crystal structures of 2D metal oxides is firstly introduced, followed by a critical discussion of various synthesis methods regarding the growth mechanisms, advantages, and limitations. Finally, the existing challenges are presented to provide possible future research directions regarding the synthesis of 2D metal oxides. This work can provide useful guidance on developing innovative approaches for producing both 2D layered and non-layered nanostructures and assist with the acceleration of the research of 2D metal oxides.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Facile synthesis of 2Dα-MnO2nanosheets for the removal of heavy metal ions

Removal of heavy metal ions (HMIs) has attracted great attentions due to the fact that they have serious effect on environment and human beings. Manganese oxide (MnO₂) was widely used as absorbent for the HMIs removal on account of its low-cost, eco-friendly and biocompatibility. The modification of morphological and structure is recognized as the effective route to improve the adsorption capacity. In this work, 2Dα-MnO₂nanosheets were synthesized by hydrothermal method with Al³⁺additive. With the merits of high specific surface area, high dispersity in aqueous solution and abundant surface defects, 2Dα-MnO₂nanosheets exhibited excellent HMIs adsorption performance. The maximum adsorption capacity of 2Dα-MnO₂nanosheets reached 1.604 mmol g^-1(Pb²⁺) and 0.813 mmol g^-1(Cd²⁺), respectively and can maintain stable after five cycles. Besides, the established adsorption kinetics fitted well with pseudo-second-order adsorption kinetics model. Based on the above results, 2Dα-MnO₂is efficient for the removal of HMIs and possesses remarkable practical application potential.

Controlled synthesis of a hierarchical CuNi2O4@SnS nanocauliflower-like structure on rGO as a positive electrode material for an asymmetric supercapacitor

Hierarchical CuNi2O4@SnS@rGO/NF is a promising electrode material for building up an impressive supercapacitor.

Graphene oxide induced assembly and crumpling of Co3O4 nanoplates

Cobalt (II, III) oxide (Co₃O₄) has been widely studied and applied in various fields, however, it suffers from slow mass and electron transfer during applications. Herein, crumpled Co₃O₄ and Co₃O₄/reduced graphene oxide (rGO) with tunable 2D-in-3D structures were prepared by combining spray pyrolysis with a graphene oxide (GO) template. The 2D Co₃O₄ nanoplates were interconnected with each other to form a 3D ball with many wrinkles, resulting in defect enrichment on the abundant boundaries of the nanosheets, which provided more active sites for catalytic reactions. In addition, the unique 2D-in-3D structure allowed fast mass transfer and structural stability. Furthermore, the assembled structure could be understood as being composed of uniformly distributed oxygen-containing functional groups pinning metal cations on the GO surface through electrostatic interaction, and the 2D structure of the GO enabled the in situ converted Co₃O₄ to grow along the GO surface with excellent dispersion. Taking advantage of the above, the Co₃O₄/rGO balls demonstrated an excellent oxygen evolution reaction performance, an overpotential of 298 mV at a current density of 10.0 mA cm^-2 and a current density of 115.9 mA cm^-2 at the overpotential of η = 500 mV.

A robust Mn@FeNi-S/graphene oxide nanocomposite as a high-efficiency catalyst for the non-enzymatic electrochemical detection of hydrogen peroxide

Exploring high-efficiency, stable, and cost-effective electrocatalysts for electrochemical activities is greatly desirable and challenging. Herein, a newly designed hybrid catalyst with manganese-doped FeNi-S encapsulated into graphene oxide (Mn@FeNi-S/GO) with unprecedented electrocatalytic activity was developed by simple one-step heat treatment followed by sonication. X-ray powder diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and N₂ sorption isotherm demonstrated the successful formation of Mn@FeNi-S/GO. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) further confirmed the kinetic-favourable adsorption of hydrogen peroxide (H₂O₂) onto the surface sites of Mn@FeNi-S/GO. Additionally, the synergetic effects between Mn@FeNi-S and GO are regarded as significant contributors to an efficient electron transfer path, and they promote the capture of H₂O₂ in hybrid catalysts. Under an optimal condition, a biosensor-based Mn@FeNi-S/GO electrode exhibits a high sensitivity of 8.929 μA μM^-1 cm^-2 and a detection limit of 8.84 nM with a wide detection range for H₂O₂ and excellent selectivity; also, it is capable of online monitoring H₂O₂ derived from apple juice and human blood serum.

Hybrid Polymer/Metal Oxide Thin Films for High Performance, Flexible Transistors

Metal oxides (MOs) have garnered significant attention in a variety of research fields, particularly in flexible electronics such as wearable devices, due to their superior electronic properties. Meanwhile, polymers exhibit excellent mechanical properties such as flexibility and durability, besides enabling economic solution-based fabrication. Therefore, MO/polymer nanocomposites are excellent electronic materials for use in flexible electronics owing to the confluence of the merits of their components. In this article, we review recent developments in the synthesis and fabrication techniques for MO/polymer nanocomposite-based flexible transistors. In particular, representative MO/polymer nanocomposites for flexible and transparent channel layers and gate dielectrics are introduced and their electronic properties-such as mobilities and dielectric constant-are presented. Finally, we highlight the advances in interface engineering and its influence on device electronics.

Nanoporous hybrid CuO/ZnO/carbon papers used as ultrasensitive non-enzymatic electrochemical sensors

In this research, we demonstrate a facile approach for the synthesis of a graphite-analogous layer-by-layer heterostructured CuO/ZnO/carbon paper using a graphene oxide paper as a sacrificial template.

High-Crystallinity Urchin-like VS4 Anode for High-Performance Lithium-Ion Storage

VS₄ anode materials with controllable morphologies from hierarchical microflower, octopus-like structure, seagrass-like structure to urchin-like structure have been successfully synthesized by a facile solvothermal synthesis approach using different alcohols as solvents. Their structures and electrochemical properties with various morphologies are systematically investigated, and the structure-property relationship is established. Experimental results reveal that Li⁺ ion storage behavior in VS₄ significantly depends on physical features such as the morphology, crystallite size, and specific surface area. According to this study, electrochemical performance degrades on the order of urchin-like VS₄ > octopus-like VS₄ > seagrass-like VS₄ > flower-like VS₄. Among them, urchin-like VS₄ demonstrates the best electrochemical performance benefiting from its peculiar structure which possesses large surface area that accommodates the volume change to a certain extent, and single-crystal thorns that provide fast electron transportation. Kinetic parameters derived from EIS spectra and sweep-rate-dependent CV curves, such as charge-transfer resistances, Li⁺ ion apparent diffusion coefficients and stored charge ratio of capacitive and intercalation contributions, both support this claim well. In addition, the EIS measurement was conducted during the first discharge/charge process to study the solid electrolyte interface (SEI) formation on urchin-like VS₄ and kinetics behavior of Li⁺ ion diffusion. A better fundamental understanding on Li⁺ storage behavior in VS₄ is promoted, which is applicable to other vanadium-based materials as well. This study also provides invaluable guidance for morphology-controlled synthesis tailored for optimal electrochemical performance.

Two-Dimensional Oxides: Recent Progress in Nanosheets

Two-dimensional (2D) materials have been widely investigated for the last few years, introducing nanosheets and ultrathin films. The often superior electrical, optical and mechanical properties in contrast to their three-dimensional (3D) bulk counterparts offer a promising field of opportunities. Especially new research fields for already existing and novel applications are opened by downsizing and improving the materials at the same time. Some of the most promising application fields are namely supercapacitors, electrochromic devices, (bio-) chemical sensors, photovoltaic devices, thermoelectrics, (photo-) catalysts and membranes. The role of oxides in this field of materials deserves a closer look due to their availability, durability and further advantages. Here, recent progress in oxidic nanosheets is highlighted and the benefit of 2D oxides for applications discussed in-depth. Therefore, different synthesis techniques and microstructures are compared more closely.

Topochemical synthesis of 2D materials

This review summarizes the rapidly-developed topochemical synthesis of 2D materials, explains the growth mechanisms and provides outlooks for future research.

Two-Dimensional Metal Oxide Nanomaterials for Next-Generation Rechargeable Batteries

The exponential increase in research focused on two-dimensional (2D) metal oxides has offered an unprecedented opportunity for their use in energy conversion and storage devices, especially for promising next-generation rechargeable batteries, such as lithium-ion batteries (LIBs) and sodium-ion batteries (NIBs), as well as some post-lithium batteries, including lithium-sulfur batteries, lithium-air batteries, etc. The introduction of well-designed 2D metal oxide nanomaterials into next-generation rechargeable batteries has significantly enhanced the performance of these energy-storage devices by providing higher chemically active interfaces, shortened ion-diffusion lengths, and improved in-plane carrier-/charge-transport kinetics, which have greatly promoted the development of nanotechnology and the practical application of rechargeable batteries. Here, the recent progress in the application of 2D metal oxide nanomaterials in a series of rechargeable LIBs, NIBs, and other post lithium-ion batteries is reviewed relatively comprehensively. Current opportunities and future challenges for the application of 2D nanomaterials in energy-storage devices to achieve high energy density, high power density, stable cyclability, etc. are summarized and outlined. It is believed that the integration of 2D metal oxide nanomaterials in these clean energy devices offers great opportunities to address challenges driven by increasing global energy demands.

Build a Rigid-Flexible Graphene/Silicone Interface by Embedding SiO2 for Adhesive Application

An effective strategy was developed to enhance the adaptability of graphene/silicone matrices under external stimuli by embedding nanoscale SiO2 into the graphene/silicone interfaces as a buffer layer. Chemically reduced graphene (rGE) was first covered by SiO2 using an in situ preparation, forming sandwichlike rGE/SiO2 (rGES). Then, rGES was integrated into methyl vinyl polysiloxane, followed by vulcanization, producing the final rGES/silicone rubber (SR) nanocomposite. Such interfacial modification actually built a rigid-flexible SiO2 buffer layer between rGE and polysiloxane. Obvious improvements were seen in both thermal and mechanical properties due to improved interfacial interaction. In a vulcanized rGES/SR system, the addition of 30 wt % rGES (3 wt % rGE) yielded a tensile strength of 6.13 MPa (up to 25 times that of the unmodified rGE in filled SR), a tear strength of 18.08 kN/m, and an elongation at break of 267%, several times higher than those of an rGE/SR nanocomposite. Thermal analysis results indicated that the initial decomposition temperature of rGES/SR containing 5 wt % rGES (0.5 wt % rGE) increased by more than 98 and 288 °C compared to that of SiO2/SR and rGE/SR, respectively. The rGES/polysiloxane matrices showed a tensile shear adhesive strength of 1.78 MPa when used as an adhesive for aluminum sheets, which is higher than that of the rGE/polysiloxane matrix (0.93 MPa).

Graphene and its derivatives as versatile templates for materials synthesis and functional applications

The obvious incongruity between the increasing depletion of fossil fuel and the finite amount of resources has motivated us to seek means to maintain sustainability in our society. Developing renewable and highly efficient energy conversion and storage systems represents one of the most promising and viable methods. Although the efficiency of energy conversion and storage devices depends on various factors, their overall performances strongly rely on the structure and functional properties of materials. Graphene and its derivatives as versatile templates for materials synthesis have garnered widespread interest because of their flexible capability to tune the morphology and structure of functional materials. Herein, we have demonstrated recent progress on graphene and its derivatives as versatile templates for materials synthesis, particularly highlighting the basic fundamental roles of graphene in the materials preparation process. Then, a concise overview of the functional applications of materials obtained from graphene-templated approaches has been presented with a few selected examples to show the wide scope of potential in energy storage and conversion. Finally, a brief perspective and potential future challenges in this burgeoning research area have been discussed.

Ultralight, Flexible, and Semi-Transparent Metal Oxide Papers for Photoelectrochemical Water Splitting

Thanks to their versatile functionality, metal oxides (MOs) constitute one of the key family materials in a variety of current demands for sensor, catalysis, energy storage and conversion, optical electronics, and piezoelectric mechanics. Much effort has focused on engineering specific nanostructure and macroscopic morphology of MOs that aims to enhance their performances, but the design and controlled synthesis of ultrafine nanostructured MOs in a cost-effective and facile way remains a challenge. In this work, we have exploited the advantages of intrinsic structures of graphene oxide (GO) papers, serving as a sacrificial template, to design and synthesize two-dimensional (2D) layered and free-standing MO papers with ultrafine nanostructures. Physicochemical characterizations showed that these MO materials are nanostructured, porous, flexible, and ultralight. The as-synthesized materials were tested for their potential application in photoelectrochemical (PEC) energy conversion. In terms of PEC water splitting, copper oxide papers were used as an example and exhibited excellent performances with an extremely high photocurrent-to-weight ratio of 3 A cm^-2 g^-1. We have also shown that the synthesis method is generally valid for many earth-abundant transition metals including copper, nickel, iron, cobalt, and manganese.

Scalable salt-templated synthesis of two-dimensional transition metal oxides

Two-dimensional atomic crystals, such as two-dimensional oxides, have attracted much attention in energy storage because nearly all of the atoms can be exposed to the electrolyte and involved in redox reactions. However, current strategies are largely limited to intrinsically layered compounds. Here we report a general strategy that uses the surfaces of water-soluble salt crystals as growth templates and is applicable to not only layered compounds but also various transition metal oxides, such as hexagonal-MoO3, MoO2, MnO and hexagonal-WO3. The planar growth is hypothesized to occur via a match between the crystal lattices of the salt and the growing oxide. Restacked two-dimensional hexagonal-MoO3 exhibits high pseudocapacitive performances (for example, 300 F cm(-3) in an Al2(SO4)3 electrolyte). The synthesis of various two-dimensional transition metal oxides and the demonstration of high capacitance are expected to enable fundamental studies of dimensionality effects on their properties and facilitate their use in energy storage and other applications.

Rectangular Co3O4 with micro-/nanoarchitectures: charge-driven PDDA-assisted synthesis and excellent lithium storage performance

The charge-driven hydrothermal strategy is successfully applied to the synthesis of two dimensional (2D) rectangular Co₃O₄ with micro-/nanoarchitectures, which demonstrate excellent lithium storage performance for batteries.

Hydrothermal self-assembly of graphene foams with controllable pore size

Graphene foams with controllable pore size are fabricated by facile one-step hydrothermal self-assembly by altering the sheet sizes of GO, and uniform pore sizes as small as ∼500 nm can be successfully realized.