Low-Temperature Fabrication of Mesoporous Titanium Dioxide Thin Films with Tunable Refractive Indices for One-Dimensional Photonic Crystals and Sensors on Rigid and Flexible Substrates

High-Efficiency Bragg Mirrors by Solution-Based and Roll-to-Roll Processing

Developing solution-processed Bragg mirrors with high refractive index contrasts (ΔRI) and thermal stability while ensuring time-efficient processing and scalability is challenging. We address these limitations by engineering high RI titanium dioxide nanoparticle-based layers and low RI mesoporous silicon dioxide layers, successfully stacking up to 11 layers utilizing spin coating, as well as roll-to-roll high-throughput processing. All-inorganic Bragg mirrors with high thermal stability up to 450 °C are prepared via a rapid thermal annealing (RTA) approach, achieving a high ΔRI of 0.67 at 519 nm and up to 0.92 at 380 nm and delivering superior (∼97%) reflectance intensities. We have further fabricated a 11-layer Bragg mirror on a flexible substrate at scales of 5 ft × 0.5 ft using commercial roll-to-roll tools, yielding ∼80% reflectance without RTA, representing unparalleled scalability for flexible, efficient Bragg mirrors by solution processing.

Colorable Light-Scattering Device Based on Polymer-Stabilized Ion-Doped Cholesteric Liquid Crystal and an Electrochromatic Layer

Bistable polymer-stabilized cholesteric liquid crystal (LC) devices have been extensively researched due to their energy-saving benefits. Compared to devices with merely transparent and light-scattering states, LC devices with controlled light absorption or changeable color functions are unquestionably more intriguing. In this paper, a polymer-stabilized ion-doped cholesteric LC and an electrochromic layer are used to fabricate a colorable device which can show four operating states: transparent, light-scattering, colored transparent, and colored light-scattering. The working principle and fabrication strategy are explained in detail. Based on the dielectric response of LC, the electrohydrodynamic effect of ion-doped LC, and the redox reaction of electrochromic materials, the transparent or light-scattering state and the colored or colorless state of the device can be regulated by controlling the alternating frequency and the direction of the electric field. The display performance related to the monomer, chiral dopant, and electrochromic layer is investigated. The content of monomer and chiral dopant affects the polymer network and pitch of cholesteric LC, which then affects the driving voltages and contrast ratio. The thickness of the electrochromic layer has a significant impact on the transmittance of the device's coloring and fading states. The sample with excellent operating states is obtained by optimizing the material and the construction, which can be widely applied in smart windows and energy-saving display devices.

Fabrication of robust superhydrophobic magnetic multifunctional coatings and liquid marbles

To obtain durable and multi-function superhydrophobic surfaces, we reported a facial method to prepare a multifunctional suspension (γ-Fe₂O₃@SiO₂@PDMS suspension) named as FSP suspension, in which γ-Fe₂O₃ was coated by the silica shell and PDMS was used as the outer layer. Superhydrophobic magnetic polyurethane (SMPU) sponge was prepared by immersing the polyurethane (PU) sponge into the FSP suspension, exhibiting the superior ability to absorb oil. In addition, it could also move directionally by the attraction of magnets and absorb the oil along the fixed path. The heated superhydrophobic magnetic stainless steel (H-SMSS) mesh was acquired by spraying FSP suspension onto the stainless steel mesh and then heating at 400 °C, which demonstrated superior superhydrophobicity and resistance to abrasion and chemical corrosion. Besides, the H-SMSS mesh displayed excellent flux and efficiency to separate the oil/water mixture. Rolling droplets on FSP particles, the superhydrophobic magnetic liquid marbles (SMLMs) were fabricated, in which liquids with different volumes were encapsulated and transported directionally. Further, it was convenient to inject liquid into the SMLM and withdraw liquid from it. Thus, the prepared FSP suspension has promising applications in constructing large-area, robust, and multifunctional surfaces and microreactors.

Bioinspired Free-Standing One-Dimensional Photonic Crystals with Janus Wettability for Water Quality Monitoring

Materials with specific wettability properties have aroused enormous interest and research for their broad application prospects in chemical reaction, medical diagnosis, biological analysis, etc. Here, inspired by the unique Janus wettability of lotus leaf and Bragg stacks of beetles, we present a free-standing film with Janus wettability and tunable structural color for water quality monitoring. This film is constructed by using a flexible polymer polyurethane (PU) to pack poly(N-isopropyl acrylamide-bis-acrylamide-acrylic acid) (P(NiPAAm-bis-AA))/TiO₂ one-dimensional photonic crystals (1DPCs) into a free-standing state with Janus wettability and tunable structural color. The outer top surface of the film could achieve vivid structural color and a superhydrophobic ability; meanwhile, the outer lower surface could achieve a superhydrophilic ability. Owing to the outstanding pH-sensitive property of the P(NiPAAm-bis-AA), the Janus films could switch its structural color under different pH conditions. This imparts the free-standing film with stability and an antirotation property on the air-water interface. Based on this phenomenon, we have demonstrated a Janus wettability film, together with tunable structural color for water quality monitoring, which gives the bioinspired materials high potential applications in environmental protection.

BTEX Vapor Detection with a Flexible MOF and Functional Polymer by Means of a Composite Photonic Crystal

Owing to superior sorption properties, structural variability, and versatility, metal-organic frameworks (MOFs) are used as sensing materials with both high selectivity and sensitivity. Herein, integrating a MOF with a polymer, a multilayered photonic crystal (PC) sensor, which is composed of NH₂-MIL-88B nanocrystals and poly(styrene-acrylic acid) nanoparticles, is fabricated. Synthetically, by taking advantage of the sensitive breathing effect of the MOF and excellent stimuli-response of the copolymer, the sensor outputs significant optical signals that can be visually recognized and captured with the assistance of the spectrum with the detection limits of 3.70, 0.87, 0.42, and 0.22 g/m³ when exposed to benzene, toluene, ethylbenzene, and xylene (BTEX), respectively. Thanks to the porous construction and ultrathin feature, the PC sensor reaches a sensing balance within 3 s in BTEX streams and restores its initial state immediately after the rapid volatilization of the vapors. The function of the MOF material is confirmed by comparing the sensing properties of MOF/polymer PC with those of the SiO₂/polymer one. In addition, as the designed MOF/polymer-based PC sensor shows different spectrum characteristics compared with those of other reported MOF-based ones, finite element simulation technology is adopted to help explain the relationship between optical property and material structure feature of the multilayered PC structure.

Tuning Pore Dimensions of Mesoporous Inorganic Films by Homopolymer Swelling

The functionality and applications of mesoporous inorganic films are closely linked to their mesopore dimensions. For material architectures derived from a block copolymer (BCP) micelle coassembly, the pore size is typically manipulated by changing the molecular weight corresponding to the pore-forming block. However, bespoke BCP synthesis is often a costly and time-consuming process. An alternative method for pore size tuning involves the use of swelling agents, such as homopolymers (HPs), which selectively interact with the core-forming block to increase the micelle size in solution. In this work, poly(isobutylene)-block-poly(ethylene oxide) micelles were swollen with poly(isobutylene) HP in solution and coassembled with aluminosilicate sol with the aim of increasing the resulting pore dimensions. An analytical approach implementing spectroscopic ellipsometry (SE) and ellipsometric porosimetry (EP) alongside atomic force microscopy (AFM) and small-angle X-ray scattering (SAXS) in transmission and grazing-incidence (GISAXS) modes enabled us to study the material evolution from solution processing through the manifestation of the mesoporous inorganic film after BCP removal. The in-depth SE/EP analysis evidenced an increase of more than 45% in mesopore diameter with HP swelling and a consistent scaling of the overall void volume and number of pores. Importantly, our analytical toolbox enabled us to study the effect of swelling on the connecting necks between adjacent pores, with observed increases as high as ≈35%, offering novel pathways to sensing, electrochemical, and other mass-transfer-dependent applications.

Photo-Induced Super-hydrophilic Thin Films on Quartz Glass by UV Irradiation of Precursor Films Involving a Ti(IV) Complex at Room Temperature

Photo-induced super-hydrophilic thin films were fabricated on a quartz glass substrate by ultraviolet (UV) irradiation of a molecular precursor film at room temperature. A molecular precursor film exhibiting high solubility to both ethanol and water was obtained by spin-coating a solution involving a Ti(IV) complex; this complex was prepared by the reaction of Ti(IV) alkoxide with butylammonium hydrogen oxalate and hydrogen peroxide in ethanol. Transparent and well-adhered amorphous thin films of 160–170 nm thickness were obtained by weak UV irradiation (4 mW·cm⁻² at 254 nm) of the precursor films for over 4 h at room temperature. The resultant thin films exhibiting low refractive indices of 1.78–1.79 were mechanically robust and water-insoluble. The chemical components of the thin films were examined by means of Fourier transform-infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) spectra, focusing on the presence of the original ligands. The super-hydrophilic properties (evaluated based on the water contact angles on the surfaces) of the thin films after being kept in a dark condition overnight emerged when the aforementioned UV-light irradiation was performed for 10 min. It was additionally clarified that the super-hydrophilicity can be photo-induced repeatedly by UV irradiation for 10 min (indicated by a contact angle smaller than 4°) even after the hydrophilic level of the thin films had once been lowered by being in a dark condition for 4 h.

High-Performance and Multifunctional Colorimetric Humidity Sensors Based on Mesoporous Photonic Crystals and Nanogels

Colorimetric sensors, as a key branch of the application of photonic crystals (PCs), brings enthusiasm to scientists to do research. Here, simple mesoporous and structurally colored one-dimensional photonic crystals (1DPCs) constructed by alternating assembly of poly(acrylamide- N,N'-methylene bis(acrylamide)) (P(AM-MBA)) nanogels and TiO₂ nanoparticles are reported as high-performance colorimetric humidity sensors. The sensors with bright colors display rapid response to relative humidity (RH) change and reach sensing balance in 0.5 s. By varying RH from 47.0% to 89.3%, stopband of a sensor changes from 426 to 668 nm, almost spanning the whole visible range. Meanwhile, visual sensing of RH possesses good reversibility and repeatability. Moreover, the sensors with delicate patterns are facilely fabricated by partial UV photodegradation of the polymer layers with nano TiO₂ as catalyst. The delicate patterns and backgrounds show different colors and change color simultaneously and quickly by varying the ambient humidity. Accurate QR code pattern is also realized on the PC sensor; it is found successful reading of the data is only achieved by increasing RH to realize high color contrast between the code and background. Given their excellent properties, the porous hybrid PCs are promising as high-performance humidity sensors with potential display, decoration, information-storage, and encryption functions.

One Dimensional Photonic Crystals Using Ultrahigh Refractive Index Chalcogenide Hybrid Inorganic/Organic Polymers

We report on the fabrication of wholly polymeric one-dimensional (1-D) photonic crystals (i.e., Bragg reflectors, Bragg mirrors) via solution processing for use in the near (NIR) and the short wave (SWIR) infrared spectrum (1-2 μm) with very high reflectance (R ∼ 90-97%). Facile fabrication of these highly reflective films was enabled by direct access to solution processable, ultrahigh refractive index polymers, termed, Chalcogenide Hybrid Inorganic/Organic Polymers (CHIPs). The high refractive index (n) of CHIPs materials (n = 1.75-2.10) allowed for the production of narrow band IR Bragg reflectors with high refractive index contrast (Δn ∼ 0.5) when fabricated with low n polymers, such as cellulose acetate (n = 1.47). This is the highest refractive index contrast (Δn ∼ 0.5) demonstrated for an all-polymeric Bragg mirror which directly enabled high reflectivity from films with 22 layers or less. Facile access to modular, thin, highly reflective films from inexpensive CHIPs materials offers a new route to IR Bragg reflectors and other reflective coatings with potential applications for IR photonics, commercial sensing, and LIDAR applications.

Synthesis of hafnium nanoparticles and hafnium nanoparticle films by gas condensation and energetic deposition

In this work we study the fabrication and characterization of hafnium nanoparticles and hafnium nanoparticle thin films. Hafnium nanoparticles were grown in vacuum by magnetron-sputtering inert-gas condensation. The as deposited nanoparticles have a hexagonal close-packed crystal structure, they possess truncated hexagonal biprism shape and are prone to surface oxidation when exposed to ambient air forming core-shell Hf/HfO₂ structures. Hafnium nanoparticle thin films were formed through energetic nanoparticle deposition. This technique allows for the control of the energy of charged nanoparticles during vacuum deposition. The structural and nanomechanical properties of the nanoparticle thin films were investigated as a function of the kinetic energy of the nanoparticles. The results reveal that by proper adjustment of the nanoparticle energy, hexagonal close-packed porous nanoparticle thin films with good mechanical properties can be formed, without any additional treatment. It is shown that these films can be patterned on the substrate in sub-micrometer dimensions using conventional lithography while their porosity can be well controlled. The fabrication and experimental characterization of hafnium nanoparticles is reported for the first time in the literature.

Bioinspired Photocatalytic Shark-Skin Surfaces with Antibacterial and Antifouling Activity via Nanoimprint Lithography

By combining antifouling shark-skin patterns with antibacterial titanium dioxide (TiO₂) nanoparticles (NPs), we present a simple route toward producing durable multifunctional surfaces that decrease microbial attachment and inactivate attached microorganisms. Norland Optical Adhesive, a UV-crosslinkable adhesive material, was loaded with 0, 10, or 50 wt % TiO₂ NPs from which shark-skin microstructures were imprinted using solvent-assisted soft nanoimprint lithography on a poly(ethylene terephthalate) (PET) substrate. To obtain coatings with an exceptional durability and an even higher concentration of TiO₂ NPs, a solution containing 90 wt % TiO₂ NPs and 10 wt % tetraethyl orthosilicate was prepared. These ceramic shark-skin-patterned surfaces were fabricated on a PET substrate and were quickly cured, requiring only 10 s of near infrared (NIR) irradiation. The water contact angle and the mechanical, antibacterial, and antifouling characteristics of the shark-skin-patterned surfaces were investigated as a function of TiO₂ composition. Introducing TiO₂ NPs increased the contact angle hysteresis from 30 to 100° on shark-skin surfaces. The hardness and modulus of the films were dramatically increased from 0.28 and 4.8 to 0.49 and 16 GPa, respectively, by creating ceramic shark-skin surfaces with 90 wt % TiO₂ NPs. The photocatalytic shark-skin-patterned surfaces reduced the attachment of Escherichia coli by ∼70% compared with smooth films with the same chemical composition. By incorporating as low as 10 wt % TiO₂ NPs into the chemical matrix, over 95% E. coli and up to 80% Staphylococcus aureus were inactivated within 1 h UV light exposure because of the photocatalytic properties of TiO₂. The photocatalytic shark-skin-patterned surfaces presented here were fabricated using a solution-processable and roll-to-roll compatible technique, enabling the production of large-area high-performance coatings that repel and inactivate bacteria.

Refractive Index Tuning of Hybrid Materials for Highly Transmissive Luminescent Lanthanide Particle-Polymer Composites

High-refractive-index ZrO₂ nanoparticles were used to tailor the refractive index of a polymer matrix to match that of luminescent lanthanide-ion-doped (La_0.92Yb_0.075Er_0.005F₃) light-emitting particles, thereby reducing scattering losses to yield highly transparent emissive composites. Photopolymerization of blends of an amine-modified poly(ether acrylate) oligomer and tailored quantities of ZrO₂ nanoparticles yielded optically transparent composites with tailored refractive indices between 1.49 and 1.69. By matching the refractive index of the matrix to that of La_0.92Yb_0.075Er_0.005F₃, composites with high transmittance (>85%) and low haze from the visible to infrared regions, bright 1530 nm optical emissions were achieved at solids loadings of La_0.92Yb_0.075Er_0.005F₃, ranging from 5 to 30 vol %. These optical results suggest that a hybrid matrix approach is a versatile strategy for the fabrication of functional luminescent optical composites of high transparency.

Template-Free Mesoporous Electrochromic Films on Flexible Substrates from Tungsten Oxide Nanorods

Low-temperature processed mesoporous nanocrystal thin films are platforms for fabricating functional composite thin films on flexible substrates. Using a random arrangement of anisotropic nanocrystals can be a facile solution to generate pores without templates. However, the tendency for anisotropic particles to spontaneously assemble into a compact structure must be overcome. Here, we present a method to achieve random networking of nanorods during solution phase deposition by switching their ligand-stabilized colloidal nature into a charge-stabilized nature by a ligand-stripping chemistry. Ligand-stripped tungsten suboxide (WO_2.72) nanorods result in uniform mesoporous thin films owing to repulsive electrostatic forces preventing nanorods from densely packing. Porosity and pore size distribution of thin films are controlled by changing the aspect ratio of the nanorods. This template-free mesoporous structure, achieved without annealing, provides a framework for introducing guest components, therefore enabling our fabrication of inorganic nanocomposite electrochromic films on flexible substrates. Following infilling of niobium polyoxometalate clusters into pores and successive chemical condensation, a WO_x-NbO_x composite film is produced that selectively controls visible and near-infrared light transmittance without any annealing required. The composite shows rapid switching kinetics and can be stably cycled between optical states over 2000 times. This simple strategy of using anisotropic nanocrystals gives insight into mesoporous thin film fabrication with broader applications for flexible devices.

Photonic nanorods with magnetic responsiveness regulated by lattice defects

Herein, we use experiments and numerical simulations to demonstrate a novel class of magnetically responsive photonic crystals (MRPCs) based on photonic nanorods which exhibit multiple optical properties in a magnetic field (H) due to their fixed photonic nanorods and H-tunable lattice defects. As an example, superparamagnetic Fe₃O₄@polyvinyl pyrrolidone (PVP)@SiO₂ photonic nanorods were fabricated through a polyacrylic acid-catalysed hydrolysis-condensation reaction of γ-mercaptopropyltrimethoxysilane around chain-like PC templates formed by monodispersed Fe₃O₄@PVP particles under H. For the as-proposed MRPCs, with increasing H, the photonic nanorods firstly experience in situ rotational orientation along the H direction, followed by alignment and connection into long parellel nanochains via the spaces between the ends of adjacent photonic nanorods (named lattice defects). As the number and size of the lattice defects changes with H, the MRPCs exhibit visible red-shifts and blue-shifts of their diffraction wavelengths in addition to monotonous enhancement of their diffraction peaks. These optical properties are very different from those of previously reported MRPCs. The diversity of the structural colors and brightness of these MRPCs with H is also closely dependent on the applied time of H, the concentration of the photonic nanorods, and the structural parameters of the nanorods, including nanorod length and interparticle distance. Due to the difficult duplication of their various optical properties as well as their easy fabrication and low cost, MRPCs based on photonic nanorods are suitable for wide applications in forgery protection and information encryption.