Graphene-based Recyclable Photo-Absorbers for High-Efficiency Seawater Desalination

Solar dryer with double pass flat plate solar collector and carbon nanodots-coated absorber surface

The present study details the development of a solar dryer with double pass flat plate solar collector having carbon nanodots (CNDs) coated absorber surface. Among the various concentrations of CNDs (0.1, 0.2, 0.5, 1, and 2%), the 0.5% CNDs coated absorber surface recorded the highest absorptance and lowest reflectance with higher spectral selectivity of 0.933. Hence, the 0.5% coating was selected as the optimum concentration and coated over the absorber surface of flat plate solar air collector. SEM image of black painted surface is clear and smooth and CNDs coated absorber surface is having dispersed particle with rough surface. FTIR absorption peak values revealed that the presence of black paint and CNDs in the 0.5% CNDs coated aluminium sheet. The efficiency of collector coated with 0.5% CNDs was calculated at various air flow rate of 0.008, 0.016, 0.018, and 0.021 kg/s and results revealed that the rise in air flow rate from 0.008 to 0.021 kg/s increased the efficiency from 39.22 to 82.99%. The solar dryer connected with the developed collector was tested for the performance and the drying studies revealed that shrimp and false white sardine required 10 h and 11 h drying time during the experimental studies.

Enhanced solar interfacial evaporation through lignin-polyaniline composite coatings on Balsa wood substrates

Solar interfacial evaporation employing wood-derived substrates is increasingly acknowledged as a viable desalination and wastewater treatment technique. This study presents an optimized method that enhances the efficiency of solar interfacial evaporation by applying a coating of lignin-polyaniline composites (EHL-PANI) onto balsa wood substrates. Initial assessments involved comparing evaporators made from various kinds of wood, identifying balsa wood-based photothermal evaporators as the most effective, with an evaporation rate of 1.63 kg·m-2·h-1 and an efficiency of 72.7 %. Photothermal properties were further improved through the chemical oxidation of enzymatic hydrolysis lignin (EHL) with polyaniline, producing a composite with notably high dispersion stability and uniform particle distribution. This modification resulted in reduced particle size and enhanced stability of the polyaniline, which is crucial for boosting photothermal activity. Additionally, the EHL-PANI composites demonstrated exceptional light absorption, exceeding 95 %, and significant photothermal conversion efficiency across a broad wavelength range, attributable to polyaniline's broadband light absorption characteristics. A prototype evaporator, featuring the EHL-PANI coated on a balsa wood substrate, was constructed to assess performance, achieving a water evaporation rate of 2.10 kg·m-2·h-1 and an efficiency of 80.7 % under solar illumination of 1 kW·m-2.

Numerical Simulation Technologies in Solar-Driven Interfacial Evaporation Processes

Solar interfacial evaporation technology has the advantages of environmentally conscious and sustainable benefits. Recent research on light absorption, water transportation, and thermal management has improved the evaporation performance of solar interfacial evaporators. However, many studies on photothermal materials and structures only aim to improve performance, neglecting explanations for heat and mass transfer coupling or providing evidence for performance enhancement. Numerical simulation can simulate the diffusion paths and heat and water transfer processes to understand the thermal and mass transfer mechanism, thereby better achieving the design of efficient solar interfacial evaporators. Therefore, this review summarizes the latest exciting findings and tremendous advances in numerical simulation for solar interfacial evaporation. First, it presents a macroscopic summary of the application of simulation in temperature distribution, salt concentration distribution, and vapor flux distribution during evaporation. Second, the utilization of simulation in the microscopic is summed up, specifically focusing on the movement of water molecules and the mechanisms of light responses during evaporation. Finally, all simulation methods have the goal of validating the physical processes in solar interfacial evaporation. It is hoped that the use of numerical simulation can provide theoretical guidance and technical support for the application of solar-driven interfacial evaporation technology.

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation

Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of "waste" MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m-2 h-1 under one-sun illumination, and 18.37 kg m-2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes "waste" MS, enabling a self-floating evaporation device for freshwater collection.

Recent Advances of Green Electricity Generation: Potential in Solar Interfacial Evaporation System

Solar-driven interfacial evaporation (SDIE) has played a pivotal role in optimizing water-energy utilization, reducing conventional power costs, and mitigating environmental impacts. The increasing emphasis on the synergistic cogeneration of water and green electricity through SDIE is particularly noteworthy. However, there is a gap of existing reviews that have focused on the mechanistic understanding of green power from water-electricity cogeneration (WEC) systems, the structure-activity relationship between efficiency of green energy utilization in WEC and material design in SDIE. Particularly, it lacks a comprehensive discussion to address the challenges faced in these areas along with potential solutions. Therefore, this review aims to comprehensively assess the progress and future perspective of green electricity from WEC systems by investigating the potential expansion of SDIE. First, it provides a comprehensive overview about material rational design, thermal management, and water transportation tunnels in SDIE. Then, it summarizes diverse energy sources utilized in the SDIE process, including steaming generation, photovoltaics, salinity gradient effect, temperature gradient effect, and piezoelectric effect. Subsequently, it explores factors that affect generated green electricity efficiency in WEC. Finally, this review proposes challenges and possible solution in the development of WEC.

Cost-Effective and Scalable Solar Interface Evaporators Derived from Industry Waste for Efficient Solar Steam Generation

Interfacial solar steam generation for sustainable and eco-friendly desalination and wastewater treatment has attracted much attention. However, costly raw materials and complex preparation processes pose constant challenges to its wide promotion. Herein, a novel, cost-effective, and scalable strategy is presented for preparing solar interface evaporators using industrial waste as a raw material. Modified polyethylene foam evaporators (M-EPEs) are simply prepared by drilling and then hydrophilic modification of industrial waste (EPE-1). M-EPEs not only retain the strong mechanical properties and thermal insulating properties (0.047 W·m-1·K-1) of EPE-1 but also exhibit superhydrophilicity and strong light absorption (over 90%). M-EPEs achieve a high evaporation rate of 1.497 kg·m-2·h-1 and photothermal efficiency of up to 93.8% under 1 kW·m-2 solar illumination. Moreover, it has excellent stability and salt tolerance. Our work addresses the environmental issues of recycling polyethylene waste and provides a facile and efficient strategy for designing low-cost, large-scale solar interface evaporators for desalination.

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

3D porous β-cyclodextrin grafted graphene oxide/sodium alginate superhydrophilic natural polysaccharide-based aerogel for solar steam generation

Solar steam generation (SSG) emerges as a paramount technology for efficient and sustainable desalination and wastewater purification. The innovative development of porous aerogel materials for solar steam generation heralds a new era in photothermal materials. In this study, a category of β-cyclodextrin-grafted graphene oxide/sodium anionic polysaccharide alginate composite aerogels (named GO-CD/SA) with solar steam generation behavior and wastewater purification properties is developed. GO-CD/SA demonstrates remarkable properties, including an impressive solar absorption efficiency of approximately 97.4 %, a low thermal conductivity of just 0.124 W m-1 K-1 in a wetted state, and exceptional superhydrophilicity. These attributes collectively contribute to GO-CD/SA achieving an evaporation rate of 1.79 kg m-2 h-1 when utilized with pure water. Furthermore, GO-CD/SA features an abundant three-dimensional porous structure (88.07 % porosity) and superhydrophilic properties that promote the rapid reflux of salt solution between the pore channels. This, in turn, enables excellent salt resistance, with no noticeable salt crystals precipitating during continuous evaporation in 20 % high concentration brine for 6 h. GO-CD/SA also demonstrates outstanding purification capabilities for organic dye wastewater and heavy metal ion wastewater. Therefore, this work combines the advantages of salt tolerance and wastewater treatment, paving the way for the exploration of natural polysaccharide-based photothermal materials.

Scalable, Green, and Cost-Effective Carbonized Sand for Efficient Solar Desalination

Nowadays, sweet and drinkable water shortage is a global issue which has attracted widespread attention. Desalination of seawater as the greatest source of water on our planet using solar energy as the most abundant and green energy source for producing fresh water can help us address this issue. Interfacial solar desalination is a state-of-the-art, sustainable, green, and energy-efficient method that has been studied lately. One of the key parameters for researching this method with reasonable efficiency is a photothermal material. Herein, carbon-coated sand was synthesized using abundant, green, and low-cost materials (sand and sugar), and its performance as a photothermal material is investigated and reported. In this work, a three-dimensional (3D) system is introduced to develop the performance and efficiency of the system under real sun irradiation and natural circumstances. The salt rejection ability of the system is another important thing we should notice due to the high salinity of seawater that we want to desalinate. The superhydrophilic carbonized sand demonstrated a good evaporation rate of 1.53 kg/m²h and 82% efficiency under 1 sun irradiation and upright salt rejection ability, which exhibited its capability to be used in green solar-driven water vaporization technology for sweet water production. The effects of important parameters, including light intensity, wind speed, and environment temperature, on the evaporation rate using carbonized sand as a solar collector in a solar desalination system were studied in both laboratory and real systems.

Solar-driven seawater desalination via plasmonic hybrid MOF/polymer and its antibacterial activity

In recent years, solar seawater desalination has been considered to be a promising and cost-effective technique to produce clean sources for water treatment and water deficiency. In addition, this technique shows high photothermal conversion efficiency by solar collectors to transfer solar energy into heat and the transformation of molecules in the capillaries of solar evaporators. In this study, we report the preparation of graphene-supported MIL-125 with polyurethane foam (MGPU) for solar steam generation. We modified MGPU by using the plasmonic nanoparticles of Ag and a polymer of polyaniline to increase the evaporation rate. Polyurethane foam can float on the surface of water and self-pump water by its hydrophilic porous structure, superior thermal insulation capabilities, and easy fabrication. MIL-125 has a high salt rejection and higher water permeability. It can reduce the affinity between water molecules and the pore surface of membrane, making it simple for water molecules to move through the pores. GO is a great alternative for steam generation applications since it exhibits broad-band light. The strong solar absorption, photothermal conversion efficiency, and photoreaction efficiency are enhanced by the use of silver nanoparticles in the photoreaction. The salt resistance capability is enhanced in saline water in the presence of polyaniline in a composite. Under one solar irradiation, the Ag/PANI/GO@MIL-125 (Ag-PMG) nanocomposite demonstrates an average 1.26 kg m² h^-1 rate of evaporation and an efficiency as high as 90%. The composite exhibits remarkable stability and durability after more than 10 cycles of use without a noticeable decrease in activity. In addition, the composite exhibits excellent organic dye removal from contaminated water and generates pure condensed freshwater. The antibacterial photoactivity of the photocatalysts was examined against B. subtilis and E. coli. The results demonstrate that Ag-PMG shows higher antibacterial activity than MIL-125 and PMG. It was shown that the presence of rGO, PANI, and Ag in the sample enhances the antimicrobial activity.

Promoting the electrocatalytic oxygen evolution reaction on NiCo2O4 with infrared-thermal effect: A strategy to utilize the infrared solar energy to reduce activation energy during water splitting

Utilization of the infrared (IR) solar energy remains a challenging task for traditional photo(electro)catalysis. Taking advantage of the IR-thermal effect to facilitate sluggish electrocatalytic reactions emerges as a promising way to utilize the IR band of the solar spectrum. In this work, nickel foam (NF) supported NiCo₂O₄ nanoneedles (NF/NiCo₂O₄ NNs) were prepared to promote the oxygen evolution reaction (OER) via the IR-thermal effect, with the NF/NiCo₂O₄ NNs acting as both the IR absorbing antennae and the OER active anode. The potential required to deliver a current density of 200 mA cm^-2 is negatively shifted from 1.618 V in the dark to 1.578 V under IR irradiation, and the Tafel slope is also decreased from 106 to 89 mV dec^-1. We demonstrate that the enhancement of OER activity is due to the localized temperature rise under IR irradiation. We measured the electrochemical activation energy of OER on NF/NiCo₂O₄ with and without IR irradiation, and the results reveal that IR irradiation reduces the kinetic energy barrier of the OER by IR-thermal effect and then facilitates OER kinetics. This work highlights a new approach to utilizing the IR portion of the sunlight to produce renewable hydrogen energy via water splitting.

Robust, Scalable, and Cost-Effective Surface Carbonized Pulp Foam for Highly Efficient Solar Steam Generation

Recently, a solar-driven evaporator has been applied in seawater desalination, but the low stability, high cost, and complex fabrication limit its further application. Herein, we report a novel, low-cost, scalable, and easily fabricated pulp-natural rubber (PNR) foam with a unique porous structure, which was directly used as a solar-driven evaporator after facile surface carbonization. This surface carbonized PNR (CPNR) foam without interface adhesion or modification was composed of a top photothermal layer with light absorption ability and a bottom hydrophilic foam layer with a porous and interconnected network structure. Due to the strong light absorption ability (93.2%) of the carbonized top layer, together with the low thermal conductivity (0.1 W m K^-1) and good water adsorption performance (9.9 g g^-1) of the bottom layer, the evaporation rate and evaporation efficiency of the pulp foam evaporator under 1 sun of illumination attained 1.62 kg m^-2 h^-1 and 98.09%, respectively, which were much higher than those of most cellulose-based solar-driven evaporators. Furthermore, the CPNR foam evaporator with high cost-effectiveness presented high light-thermal conversion, heat localization, and good salt rejection properties due to the unique porous structure. Additionally, the CPNR foam evaporator exhibited potential applications in the treatments of simulated sewage, metal ion concentration, and seawater desalination. Its cost-effectiveness was clearly higher than that of most reported evaporators as well. Therefore, this novel, low-cost, and stable pulp foam evaporator demonstrated here can be a very promising solution for water desalination and purification.

Recent Development of Carbon-Nanotube-Based Solar Heat Absorption Devices and Their Application

Population growth and the current global weather patterns have heightened the need to optimize solar energy harvesting. Solar-powered water filtration, electricity generation, and water heating have gradually multiplied as viable sources of fresh water and power generation, especially for isolated places without access to water and energy. The unique thermal and optical characteristics of carbon nanotubes (CNTs) enable their use as efficient solar absorbers with enhanced overall photothermal conversion efficiency under varying solar light intensities. Due to their exceptional optical absorption efficiency, low cost, environmental friendliness, and natural carbon availability, CNTs have attracted intense scientific interest in the production of solar thermal systems. In this review study, we evaluated CNT-based water purification, thermoelectric generation, and water heating systems under varying solar levels of illumination, ranging from domestic applications to industrial usage. The use of CNT composites or multilayered structures is also reviewed in relation to solar heat absorber applications. An aerogel containing CNTs was able to ameliorate water filtering performance at low solar intensities. CNTs with a Fresnel lens improved thermoelectric output power at high solar intensity. Solar water heating devices utilizing a nanofluid composed of CNTs proved to be the most effective. In this review, we also aimed to identify the most relevant challenges and promising opportunities in relation to CNT-based solar thermal devices.

Highly Effective Multifunctional Solar Evaporator with Scaffolding Structured Carbonized Wood and Biohydrogel

A solar evaporator that utilizes solar radiation energy can be a renewable approach to deal with energy crisis and fresh water shortage. In this study, a solar evaporator was prepared by assembling composite carbonized wood of Melaleuca Leucadendron L. and biobased hydrogel. The multilayer MXene (Ti₃C₂T_x) was embedded in the scaffolding structure of the wood to form composite carbonized wood, where the loose and ordered scaffolding structure of the carbonized wood significantly improves the efficiency of water transportation with increased capillary force. The MXene adsorbed in the carbonized wood has high binding energy with water molecules, leading to reduction of vaporization enthalpy and contact angle. Moreover, the addition of MXene can improve the light absorbance, especially for the infrared and ultraviolet light bands. The hydrogel was fabricated by crosslinking konjac glucomannan and sodium alginate polysaccharides with Ca²⁺, and it has a lower thermal conductivity than water and improves the evaporation efficiency by regulating the temperature distribution and concentrating the heat on the surface of the evaporator. This solar evaporator has an evaporation rate of 3.71 kg·m^-2·h^-1 and an evaporation efficiency of 129.64% under 2 sun illumination and is available to generate an open-circuit voltage of 1.8 mV after a 20 min hydrovoltaic, demonstrating a high performance and versatility. Also, experiments and numerical simulation were carried out to understand the mechanism and design principles of this solar evaporators.

From Materials to Devices: Rationally Designing Solar Steam System for Advanced Applications

Solar-driven water vaporization for freshwater production attracts significant interest due to its potential for solving global water scarcity problems. In this review, the recent development of management strategies via diverse rational designs in terms of light, thermal, water, and anti-salt fouling for enhancement of overall vaporization efficiency, is summarized. For device design, a host-guest concept is raised for clearly elaborating the detailed function and interaction between the solar-thermal material and the substrates. In addition, the rising technologies derived from solar vaporization, such as energy generation, photocatalysis, dehumidification, salt harvesting, sterilization, and biofuel production, are also highlighted. This review provides a new horizon toward the development of solar technologies and practical applications.

Polyphenylene Sulfide-Based Membranes: Recent Progress and Future Perspectives

As a special engineering plastic, polyphenylene sulfide (PPS) can also be used to prepare membranes for membrane separation processes, adsorption, and catalytic and battery separators because of its unique properties, such as corrosion resistance, and chemical and thermal stability. Nowadays, many researchers have developed various types of PPS membranes, such as the PPS flat membrane, PPS microfiber membrane and PPS hollow fiber membrane, and have even achieved special functional modifications. In this review, the synthesis and modification of PPS resin, the formation of PPS membrane and the research progress of functional modification methods are systematically introduced, and the future perspective of PPS membrane is discussed.

The advent of thermoplasmonic membrane distillation

Freshwater scarcity is a vital societal challenge related to climate change, population pressure, and agricultural and industrial demands. Therefore, sustainable desalination/purification of salty/contaminated water for human uses is particularly relevant. Membrane distillation is an emerging hybrid thermal-membrane technology with the potential to overcome the drawbacks of conventional desalination by a synergic exploitation of the water-energy nexus. Although membrane distillation is considered a green technology, efficient heat management remains a critical concern affecting the cost of the process and hindering its viability at large scale. A multidisciplinary approach that involves materials chemistry, physical chemistry, chemical engineering, and materials and polymer science is required to solve this problem. The combination of solar energy with membrane distillation is considered a potentially feasible low-cost approach for providing high-quality freshwater with a low carbon footprint. In particular, recent discoveries about efficient light-to-heat conversion in nanomaterials have opened unprecedented perspectives for the implementation of sunlight-based renewable energy in membrane distillation. The integration of nanofillers enabling photothermal effects into membranes has been demonstrated to be able to significantly enhance the energy efficiency without impacting on economic costs. Here, we provide a comprehensive overview on the state of the art, the opportunities, open challenges and pitfalls of the emerging field of solar-driven membrane distillation. We also assess the peculiar physicochemical properties and synthesis scalability of photothermal materials, as well as the strategies for their integration into polymeric nanocomposite membranes enabling efficient light-to-heat conversion and freshwater.

Three-Dimensional Artificial Transpiration Structure Based on 1T/2H-MoS2/Activated Carbon Fiber Cloth for Solar Steam Generation

The rise of solar steam generation is an effective strategy to mitigate clean water shortages. However, achieving further improvements in conversion efficiency and stability remains a challenge. Here, 1T/2H-MoS₂ nanosheets were uniformly assembled on activated carbon fiber cloth (A-CFC) through a facial hydrothermal method, and a three-dimensional (3D)-artificial transpiration device (ATD) was prepared using the plant transpiration process. The combination of activated carbon fiber cloth and 1T/2H phase MoS₂ exhibits high light absorption (∼97.5%), excellent mechanical stability, large evaporation area, and easy escape of vapor. Additionally, the 3D hollow cone of the MoS₂/carbon fiber cloth can effectively reduce radiative and convective energy loss and then achieve the enhancement of energy collection from the environment. An outstanding evaporation rate of 1.61 kg·m^-2·h^-1 with an optimum conversion efficiency of 97% under one sun is reached. Based on the facile fabrication, excellent stability, and high solar conversion efficiency, this nature-inspired design of 3D 1T/2H-MoS₂/A-CFC is expected to facilitate large-scale applications for seawater purification and desalination.

Thermoplasmonics in Solar Energy Conversion: Materials, Nanostructured Designs, and Applications

The indispensable requirement for sustainable development of human society has forced almost all countries to seek highly efficient and cost-effective ways to harvest and convert solar energy. Though continuous progress has advanced, it remains a daunting challenge to achieve full-spectrum solar absorption and maximize the conversion efficiency of sunlight. Recently, thermoplasmonics has emerged as a promising solution, which involves several beneficial effects including enhanced light absorption and scattering, generation and relaxation of hot carriers, as well as localized/collective heating, offering tremendous opportunities for optimized energy conversion. Besides, all these functionalities can be tailored via elaborated designs of materials and nanostructures. Here, first the fundamental physics governing thermoplasmonics is presented and then the strategies for both material selection and nanostructured designs toward more efficient energy conversion are summarized. Based on this, recent progress in thermoplasmonic applications including solar evaporation, photothermal chemistry, and thermophotovoltaic is reviewed. Finally, the corresponding challenges and prospects are discussed.

Metal-free functionalized carbonized cotton for efficient solar steam generation and wastewater treatment

Water desalination via solar steam generation is one of the most important technologies to address the increasingly pressing global water scarcity. Materials for solar photothermal energy conversion are highly sought after for their cost savings, environmental friendliness and broad utility in many applications including domestic water heating and solar-driven desalination. Herein, we report the successful development of metal-free, low weight and cost effective functionalized carbonized cotton (CC) fibers for efficient solar water desalination and wastewater treatment. The CC fibers with nearly full solar spectrum absorption, efficient photo-thermal conversion and low-cost could provide excellent alternatives to the high-cost plasmonic-based materials for solar water desalination. We also report on a novel and simple device to mitigate the issues associated with conductive heat loss by utilizing the economically viable carbonized cotton materials as an irradiation surface placed on a low-density polyethylene foam that floats on the surface of seawater. The CC solar steam generation device exhibits average water evaporation rates of 0.9, 6.4 and 10.9 kg m^-2 h^-1 with impressive solar-to-vapor efficiencies of 59.2, 88.7 and 94.9% under 1, 5 and 8 sun illumination, respectively. Moreover, the device displays excellent durability showing stable evaporation rates over 10 steam generation cycles under 5 sun of solar intensity. Furthermore, the applicability of the CC device for the removal of organic dyes from contaminated water through solar steam generation is also demonstrated. The low-cost, simple design, high solar thermal evaporation efficiency, excellent stability and long-term durability make this CC device a perfect candidate for applications in seawater desalination and wastewater treatment by solar steam generation.

Advances in photothermal nanomaterials for biomedical, environmental and energy applications

Materials that exhibit photothermal effect have attracted enormous research interests due to their ability to strongly absorb light and effectively transform it into heat for a wide range of applications in biomedical, environmental and energy related fields. The past decade has witnessed significant advances in the preparation of a variety of photothermal materials, mainly due to the emergence of many nano-enabled new materials, such as plasmonic metals, stoichiometric/non-stoichiometric semiconductors, and the newly emerging MXenes. These photothermal nanomaterials can be hybridized with other constituents to form functional hybrids or composites for achieving enhanced photothermal performance. In this review, we present the fundamental insight of inorganic photothermal materials, including their photothermal conversion mechanisms/properties as well as their potential applications in various fields. Emphasis is placed on strategic approaches for improving their light harvesting and photothermal conversion capabilities through engineering their nanostructured size, shape, composition, bandgap and so on. Lastly, the underlying challenges and perspectives for future development of photothermal nanomaterials are proposed.

Rational Design of a High Performance and Robust Solar Evaporator via 3D-Printing Technology

Utilizing the broad-band solar spectrum for sea water desalination is a promising method that can provide fresh water without sophisticated infrastructures. However, the solar-to-vapour efficiency has been limited due to the lack of a proper design for the evaporator to deal with either a large amount of heat loss or salt accumulation. Here, these issues are addressed via two cost-effective approaches: I) a rational design of a concave shaped supporter by 3D-printing that can promote the light harvesting capacity via multiple reflections on the surface; II) the use of a double layered photoabsorber composed of a hydrophilic bottom layer of a polydopamine (PDA) coated glass fiber (GF/C) and a hydrophobic upper layer of a carbonized poly(vinyl alcohol)/polyvinylpyrrolidone (PVA/PVP) hydrogel on the supporter, which provides competitive benefit for preventing deposition of salt while quickly pumping the water. The 3D-printed solar evaporator can efficiently utilize solar energy (99%) with an evaporation rate of 1.60 kg m^-2 h^-1 and efficiency of 89% under 1 sun irradiation. The underlying reason for the high efficiency obtained is supported by the heat transfer mechanism. The 3D-printed solar evaporator could provide cheap drinking water in remote areas, while maintaining stable performance for a long term.

Structure development of carbon-based solar-driven water evaporation systems

Pressing need goes ahead for accessing freshwater in insufficient supply countries and regions, which will become a restrictive factor for human development and production. In recent years, solar-driven water evaporation (SDWE) systems have attracted increasing attention for their specialty in no consume conventional energy, pollution-free, and the high purity of fresh water. In particular, carbon-based photothermal conversion materials are preferred light-absorbing material for SDWE systems because of their wide range of spectrum absorption and high photothermal conversion efficiency based on super-conjugate effect. Until now, many carbon-based SDWE systems have been reported, and various structures emerged and were designed to enhance light absorption, optimize heat management, and improve the efficient water transport path. In this review, we attempt to give a comprehensive summary and discussions of structure progress of the carbon-based SDWE systems and their working mechanisms, including carbon nanoparticles systems, single-layer photothermal membrane systems, bi-layer structural photothermal systems, porous carbon-based materials systems, and three dimensional (3D) systems. In these systems, the latest 3D systems can expand the light path by allowing light to be reflected multiple times in the microcavity to increase the light absorption rate, and its large heat exchange area can prompt more water to evaporate, which makes them the promising application foreground. We hope our review can spark the probing of underlying principles and inspiring design strategies of these carbon-based SDWE systems, and further guide device optimizations, eventually promoting in extensive practical applications in the future.

Naturally Abundant Green Moss for Highly Efficient Solar Thermal Generation of Clean Water

Water and energy scarcity are the challenges for humankind in the coming years. Sun is the largest source of energy available on the planet. Also, brackish seawater covers more than 70% of the surface of the planet. Therefore, combining these two valuable natural resources represents an appealing solution to overcome the problem of sweet water shortage. To achieve this goal, the missing link is to develop appropriate photothermal materials with efficient light-to-heat-to-vapor generation. In this work, green moss is introduced as a natural, eco-friendly, abundant, superhydrophilic, fast water transporter, salt rejector, and highly efficient solar collector material. Green moss, owing to its open-microgrooves, can supply adequate water to the evaporation surface, while its open capillary channels can reject the precipitated salt, allowing its reusability. The green moss solar steam generator demonstrated an outstanding solar evaporation rate of 2.61 kg m^-2 h^-1 under 1 sun illumination, which is much higher than other reported natural and chemically modified biomasses under otherwise similar conditions. Interestingly, upon chemical modification of the green moss surface, it is possible to increase its solar evaporation rate to >3 kg m^-2 h^-1. Using the moss to purify and desalinate brackish water, it was demonstrated that it has the ability to decrease salinity below the WHO standards for drinkable water.

High efficiency solar desalination and dye retention of plasmonic/reduced graphene oxide based copper oxide nanocomposites

Water desalination via solar-driven interfacial evaporation is one of the most essential technologies to limit the problem of global freshwater scarcity. Searching for a highly efficient, stable, eco-friendly, and cost-effective solar-absorber material that can collect the full solar spectrum is critically important for solar steam generation. This study reports the development of a new solar thermal evaporation system based on plasmonic copper oxide/reduced graphene oxide (rGO). The silver nanoparticles in the composite exhibit a very strong solar absorption. Also, rGO and CuO nanoparticles offer excellent thermal absorptivity. Polyurethane was used as the support and as a thermal insulator. Moreover, filter paper was used for fast water delivery to the surface of the solar absorber. Ag/CuO-rGO nanocomposite is manifested to be one of the most efficient solar-absorbers reported to date for solar desalination which exhibits an average 2.6 kg m-2 h-1 evaporation rate with solar thermal efficiency up to 92.5% under 1 sun irradiation. Furthermore, the composite has excellent stability and durability as it displays stable evaporation rates for more than 10 repeated cycles in use, with no significant decrease in the activity. Besides, the successful removal of various organic dyes from contaminated water is also revealed, resulting in the production of clean condensed freshwater. Finally, this work commences a new avenue of synthesizing cost-effective thermal absorbers based on metal oxides.

Advances in Solar-Driven Hygroscopic Water Harvesting

Water scarcity is one of the greatest global challenges at this time. Significant efforts have been made to harvest water from the air, due to widely available water sources present in the atmosphere. Particularly, solar-driven hygroscopic water harvesting based on the adsorption-desorption process has gained tremendous attention because of the abundance of solar energy in combination with substantial improvements in conversion efficiency enabled by advanced sorbents, improved photothermal materials, interfacial heating system designs, and thermal management in recent years. Here, recent developments in atmospheric water harvesting are discussed, with a focus on solar-driven hygroscopic water harvesting. The diverse structural designs and engineering strategies that are being used to improve the rate of the water production, including the design principles for sorbents with high adsorption capacity, high-efficiency light-to-heat conversion, optimization of thermal management, vapor condensation, and water collection, are also explored. The current challenges and future research opportunities are also discussed, providing a roadmap for the future development of solar-driven hygroscopic water harvesting technology.

Nanoenabled Photothermal Materials for Clean Water Production

Solar-powered water evaporation is a primitive technology but interest has revived in the last five years due to the use of nanoenabled photothermal absorbers. The cutting-edge nanoenabled photothermal materials can exploit a full spectrum of solar radiation with exceptionally high photothermal conversion efficiency. Additionally, photothermal design through heat management and the hierarchy of smooth water-flow channels have evolved in parallel. Indeed, the integration of all desirable functions into one photothermal layer remains an essential challenge for an effective yield of clean water in remote-sensing areas. Some nanoenabled photothermal prototypes equipped with unprecedented water evaporation rates have been reported recently for clean water production. Many barriers and difficulties remain, despite the latest scientific and practical implementation developments. This Review seeks to inspire nanoenvironmental research communities to drive onward toward real-time solar-driven clean water production.

Self-Suspended Photothermal Microreactor for Water Desalination and Integrated Volatile Organic Compound Removal

Steam generation and photocatalytic degradation of organic pollutants based on solar light are regarded as two important strategies for addressing the water scarcity issues. The water evaporation efficiency was greatly inhibited by the high cost, low stability, and low efficiencies of solar light absorption and photothermal conversion of photothermal materials. Moreover, volatile organic compounds (VOCs) are easily volatilized and enriched in as-distilled water during the photothermal process. Inspired by the structure of biomass materials in nature, a bifunctional solar light-driven steam generation and VOC removal microreactor was explored by coating commercial TiO₂ (P25) powders on a carbonized biomass waste Flammulina. With the 3D aligned porous carbon architectures, this microreactor exhibited both a high water evaporation rate (37.0 kg m^-2 h^-1) and a high energy conversion efficiency (91.2%) under simulated sunlight irradiation (light intensity = 25.5 kW m^-2). A high VOC removal rate (80.9% in 40 min) was also achieved during the steam generation process via choosing phenol as the probe pollutant molecules. The nature-inspired designing concept and bifunctional microreactor in this study may open up a new strategy for producing clean distilled water from seawater with an efficient removal of VOCs.

Performance Evaluation of a Direct Absorption Collector for Solar Thermal Energy Conversion

The solar absorption efficiency of water as a base-fluid can be significantly improved by suspending nanoparticles of various materials in it. This experimental work presents the photo thermal performance of water-based nano-fluids of graphene oxide (GO), zinc oxide (ZnO), copper oxide (CuO), and their hybrids under natural solar flux for the first time. Nanofluid samples were prepared by the two-step method and the photothermal performance of these nanofluid samples was conducted under natural solar flux in a particle concentration range from 0.0004 wt % to 0.0012 wt %. The photothermal efficiency of water-based 0.0012 wt % GO nanofluid was 46.6% greater than that of the other nanofluids used. This increased photothermal performance of GO nanofluid was associated with its good stability, high absorptivity, and high thermal conductivity. Thus, pure graphene oxide (GO) based nanofluid is a potential candidate for direct absorption solar collection to be used in different solar thermal energy conversion applications.

Facile Preparation of Three-Dimensional MoS2 Aerogels for Highly Efficient Solar Desalination

Aerogels, with porous channels for water supply and vapor escape, can provide many inherent advantages in solar desalination and wastewater treatment. For the first time, this work demonstrates the preparation of a novel three-dimensional (3D) MoS₂-based aerogel with high porosity and mechanical stability by a facile strategy for solar desalination. This 3D MoS₂ aerogel has an excellent light-absorbing efficiency of over 95% within the whole solar spectrum range, enabling a high evaporation efficiency of 88.0% under a low solar irradiation of 1.0 kW m^-2 and superhigh evaporation efficiencies of over 90% under a slightly enhanced solar irradiation of 1.5-3.0 kW m^-2 as well as a remarkable desalination performance. In addition, the excellent mechanical stability of this MoS₂ aerogel renders it to be reused for at least 10 cycles with stable water productivity. Because of its 3D architectures with high porosity and easy separation, this MoS₂-based aerogel also provides promising applications in solar-driven water purification, sterilization, and so forth.

Electrically Conductive Carbon Aerogels with High Salt-Resistance for Efficient Solar-Driven Interfacial Evaporation

Solar-driven interfacial evaporation (SIE) is a promising approach for obtaining clean water but suffers from serious salt-fouling and poor long-term performance in seawater. Here, we report a high-performance salt-resistant SIE system from the perspective of nature sustainability. An electrically conductive and magnetic carbon aerogel is prepared by carbonization of Fe₃O₄-modified cellulose that originated from waste paper, and then its external surface is activated using O₂-plasma, forming the Janus superhydrophilic/superhydrophobic structure. The superhydrophilic external surface of the aerogel with macroporous skeleton assures ultrafast and adequate water supply and salt diffusion, while the superhydrophobic interior is the thermal insulator hindering water/salt infiltration. Benefiting from high solar absorption (∼97%), low thermal conductivity, unique Janus structure, and photothermal/electrothermal effects, the aerogel shows high evaporation rate (2.1 kg m^-2 h^-1, 1 sun) for simulated seawater. The aerogel features the following remarkable long-term salt-antifouling performance: (i) >20 d continuous evaporation in simulated seawater without degradation, even in 10 wt % NaCl solution, and (ii) >50 h continuous evaporation without seawater replenishment. Moreover, heavy metal ions, soluble organics, and oil can be completely removed from complex wastewater by the aerogel. This study offers an alternative approach in achieving clean water via SIE of seawater and complex wastewater.

Building Polyoxometalate "Nano-Walls" on 3D Porous Carbon Paper: A Solar Steam Generation System for Water Purification

As promising fresh-water purification devices, solar steam generation systems have attracted significant attention recently. However, in practice, the approach often suffers from a poor solar energy conversion efficiency and a low water production rate due to poor material selection and inefficient microscopic structure design. Here, we fabricate an efficient solar steam generation system by "building" polyoxometalate "nano-walls" on rice paper-derived three-dimensional porous carbon paper. In this solar steam generation system, the height of the vertically aligned CoP₄ Mo₆ "nano-walls" range from 100 to 150 nm with thicknesses about 15 to 25 nm. Under 1 sun irradiation (1 sun = 1 kW m^-2 ), the surface temperature increases from 29 to 50 °C in a short time with a solar thermal conversion efficiency achieving 92.8 %. The stability and durability of this solar steam generation system, which withstands fifteen cycle continuous tests, also offer good prospects. Its attractive solar energy conversion performance originates from the intense sunlight absorption and high conversion ability of the CoP₄ Mo₆ "nano-walls", as well as extremely promising heat localization and water transportation properties of the three-dimensional porous carbon paper. This solar steam generation system, which has produced some inspiring results, is employed for seawater desalination and for purification of water polluted with organic dyes.

Latest development in salt removal from solar-driven interfacial saline water evaporators: Advanced strategies and challenges

Solar-driven interfacial water evaporation, which gets rid of the limitation of saline waters, enables to supply potable water in the worldwide, especially in remote areas where only solar energy and water are available. This technique has also exhibited great potential applications in fields such as seawater desalination, steam sterilization, and fuel production. However, the evaporation efficiency decreases during continuous operation in saline water due to the blockage of the solar absorber resulting from crystalline salt deposition. Therefore, it is still a great challenge to design a stable and efficient solar-driven interfacial saline water evaporator. Herein, a variety of structural designs and engineering strategies for salt removal of evaporators in the latest years were reviewed. We classified these strategies as remaining unsaturated evaporation of saline water, preventing salt ions from contacting the solar absorber, dissolving and/or migrating back of crystalline salts, and keeping salt crystallization away from evaporation area. Finally, the current challenges and future research opportunities were discussed. The purpose of this review was: (1) to provide ideas to solve the problem of the reduced efficiency causing by salt deposition during saline water evaporation and (2) to promote the application of solar-driven interfacial saline water evaporation technology by providing the latest achievements in structural designs for salt removal.

Flexible and Highly Efficient Bilayer Photothermal Paper for Water Desalination and Purification: Self-Floating, Rapid Water Transport, and Localized Heat

In view of the sustainable and environmentally friendly characteristics of solar energy, solar water evaporation has been identified as a promising approach to mitigate the global water crises. However, it is still a great challenge to develop a portable, flexible, scalable, and high-performance solar water evaporation material. Herein, a bilayer-structured solar water evaporation material consisting of a top multiwalled carbon nanotube (MWCNT) layer and a bottom polyphenylene sulfide/fibrillated cellulose (PPS/FC) paper was fabricated via a simple vacuum filtration technology for efficient solar water evaporation. The MWCNT layer performs as a light absorber with a high solar absorptance (∼93%) in the wavelength range from 400 to 1200 nm and good light-to-heat conversion capability, while the bottom layer (porous network-structured PPS/FC paper) exhibits excellent water transporting ability, high temperature stability, and good thermal insulating capability (0.0467 W m^-1 K^-1). Benefiting from the above advantages, an attractive water evaporation rate of 1.34 kg m^-2 h^-1 was achieved with near ∼95% efficiency under 1 sun irradiation (1 kW m^-2). Moreover, the MWCNTs@PPS/FC paper maintains high solar evaporation efficiency after several cycles, indicating long-term durability and good reusability. Moreover, the collected clean water using the MWCNTs@PPS/FC paper from seawater of different salinities, simulated wastewater samples with different pH values or containing heavy metal ions, as well as industrial dyes, satisfy the drinkable water standard (defined by WHO), demonstrating excellent seawater desalination and wastewater purification capability. The advanced performances of the MWCNTs@PPS/FC paper could inspire novel paradigms of solar-driven water evaporation technologies in drinkable water collection.

Effect of sonication time on the evaporation rate of seawater containing a nanocomposite

Sonication time has a significant contribution to the stability and properties of nanofluids (mixtures of nanoparticles and a base fluid). Finding the optimum sonication time can help to save energy and ensure optimal design. The present study deals with the sonication time effect on the evaporation rate of seawater containing a nanocomposite (i.e., a mixture of multi-walled carbon nanotubes and graphene nanoplates). For indoor experiments, a solar simulator was employed as the radiation source. At first, the nanofluid with a concentration of 0.01% wt. was sonicated in an ultrasonic bath for different times of 30, 60, 90, 120, 180, 240 min, and the associated zeta potential values were recorded to evaluate the stability. Next, the best time function was used to appraise the effect of concentration variations (0.001, 0.002, 0.004, 0.01, 0.02 and 0.04% wt.) and the light intensities (1.6, 2.6, and 3.6 suns) on the rate of solar steam generation. The results indicate that for a concentration of 0.01% wt. and under 3.6 suns, the highest evaporation efficiency of 61.3% would be achieved at 120 min sonication time.

Porous reduced graphene oxide/nickel foam for highly efficient solar steam generation

Solar-driven water evaporation is considered to be an effective method for seawater desalination and wastewater purification. Here, we report a novel solar steam generation (SSG) system based on reduced graphene oxide (rGO)/nickel foam. Porous rGO foam acting as a photothermal conversion layer is fabricated by coating the rGO microsheets on the metallic nickel foam. The porous structure shows a rough surface, which can improve the harvest of light by scattering effect. On the other hand, the porous structure ensures the rapid flow of steam in the evaporation process. This SSG system based on rGO/nickel foam converts the absorbed solar energy into heat energy at the water-air interface and can effectively evaporate (∼83.4%) under low irradiation of 1 sun (1 kw m^-2). The system shows great potential for the practical applications of water treatment at large-scale because of the high efficiency, simple preparation method and low cost.

Flexible and Washable CNT-Embedded PAN Nonwoven Fabrics for Solar-Enabled Evaporation and Desalination of Seawater

Nanostructured photothermal membranes hold great potential for solar-driven seawater desalination; however, their pragmatic applications are often limited by substantial salt accumulation. To solve this issue, we have designed and prepared flexible and washable carbon-nanotube-embedded polyacrylonitrile nonwoven fabrics by a simple electrospinning route. The wet fabric exhibits a strong photoabsorption in a wide spectral range (350-2500 nm), and it has a photoabsorption efficiency of 90.8%. When coated onto a polystyrene foam, the fabric shows a high seawater evaporation rate of 1.44 kg m^-2 h^-1 under simulated sunlight irradiation (1.0 kW m^-2). With a high concentration of simulated seawater as the model, the accumulation of solid salts can be clearly observed on the surface of the fabric, resulting in a severe decay of the evaporation rate. These salts can be effortlessly washed away from the fabric through a plain handwashing process. The washing process has a negligible influence on the morphology, photoabsorption, and evaporation performance of the fabric, demonstrating good durability. More importantly, a larger fabric can easily be fabricated, and the combination of washable fabrics with various parallel PS foams can facilitate the construction of large-scale outdoor evaporation devices, conferring the great potential for efficient desalination of seawater under natural sunlight.

Targeted Heating of Enzyme Systems Based on Photothermal Materials

This study demonstrates that the enzymatic reaction rate can be increased significantly by targeted heating of the microenvironment around the enzyme, while maintaining the reaction system at environmental temperature. Enzyme molecules are covalently attached to the surface of Fe₃ O₄ @reduced graphite oxide (rGO). Under visible-light irradiation, the reaction rate catalyzed by the enzyme-Fe₃ O₄ @rGO system is clearly enhanced relative to that of the free enzyme and a mixture of free enzyme and Fe₃ O₄ @rGO. This local heating mechanism contributes to promotion of the enzymatic reactions of the targeted heating of the enzyme (THE) system, which has been validated by using different enzymes, including lipase, glucose oxidase, and organophosphorus hydrolase. These results indicate that targeted heating of the catalytic centers has the same effect on speeding up reactions as that of traditional heating methods, which treat the whole reaction system. As an example, it is shown that the THE system promotes the sensitivity of an enzyme screen-printed electrode by 14 times at room temperature, which implies that the THE system can be advantageous in improving enzyme efficiency, especially if heating the entire system is impossible or could lead to degradation of substrates or damage of components, such as in vitro bioanalysis of frangible molecules or in vivo diagnosis.