Ionic Liquid-Assisted Electropolymerization for Lithographical Perfluorocarbon Deposition and Hydrophobic Patterning

MOF-303 with Lowered Water Evaporation Enthalpy for Solar Steam Generation

Hydrophilic metal-organic frameworks (MOFs) are promising for solar steam generation from waste or seawater. In this study, we propose a MOF-based Janus membrane for efficient solar steam generation. We selected MOF-303 for its hydrophilic properties and 1D channels with 6.5 Å cavity diameter, making it an excellent water-absorbing layer. Characterization via Raman spectroscopy and differential scanning calorimetry indicates that the nanoconfinement within MOF-303 can reduce the water evaporation enthalpy, thereby boosting water production efficiency. When deposited on various substrates, MOF-303 aimed to optimize solar steam generation. We enhanced the membrane performance by incorporating carbon black (CB), polydopamine (PDA), and perfluoro-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT-F), materials known for their solar-to-thermal energy conversion capabilities. PEDOT-F, in particular, also served as a hydrophobic layer, preventing salt recrystallization during seawater operation. Under one sun irradiation, the water evaporation flux for deionized water increased from 0.31 to 0.79 kg h-1 m-2 using a porous hydrophilic poly(vinylidene difluoride) substrate and further to 2.36 kg h-1 m-2 with the optimized MOF-303-CB/PDA-PEDOT-F membrane, achieving an energy conversion efficiency of 97%. Additionally, the desalination capability of the MOF-303 membrane effectively reduced metal ion concentrations (Na+, K+, Mg2+, and Ca2+) to meet the WHO drinking water standards. These findings demonstrate the significant potential of the MOF-303-based Janus membrane for practical applications in solar steam generation and desalination, combining high water evaporation rates with excellent energy conversion efficiency.

Reusable Chemically-Micropatterned Substrates via Sequential Photoinitiated Thiol-Ene Reactions as Template for Perovskite Thin-Film Microarrays

Patterning semiconducting materials are important for many applications such as microelectronics, displays, and photodetectors. Lead halide perovskites are an emerging class of semiconducting materials that can be patterned via solution-based methods. Here we report an all-benchtop patterning strategy by first generating a patterned surface with contrasting wettabilities to organic solvents that have been used in the perovskite precursor solution then spin-coating the solution onto the patterned surface. The precursor solution only stays in the area with higher affinity (wettability). We applied sequential sunlight-initiated thiol-ene reactions to functionalize (and pattern) both glass and conductive fluorine-doped tin oxide (FTO) transparent glass surfaces. The functionalized surfaces were measured with the solvent contact angles of water and different organic solvents and were further characterized by XPS, selective fluorescence staining, and selective DNA adsorption. By simply spin-coating and baking the perovskite precursor solution on the patterned substrates, we obtained perovskite thin-film microarrays. The spin-coated perovskite arrays were characterized by XRD, AFM, and SEM. We concluded that patterned substrate prepared via sequential sunlight-initiated thiol-ene click reactions is suitable to fabricate perovskite arrays via the benchtop process. In addition, the same patterned substrates can be reused several times until a favorable perovskite microarray is acquired. Among a few conditions we have tested, DMSO solvent and modified FTO surfaces with alternatively carboxylic acid and alkane is the best combination to obtain high-quality perovskite microarrays. The solvent contact angle of DMSO on carboxylic acid-modified FTO surface is nearly zero and 65±3° on octadecane modified FTO surface.

Synergistic Effects of Ions and Surface Potentials on Antifouling Poly(3,4-ethylenedioxythiophene): Comparison of Oligo(Ethylene Glycol) and Phosphorylcholine

For electrified surfaces, ions and applied potentials play major roles in controlling the surface properties. Antifouling materials such as poly(ethylene glycol) and zwitterionic polymers that resist nonspecific protein binding and cell adhesion play a key role in various biomedical applications. In this study, we investigated and compared the antifouling properties of conducting polymers grafted with oligo(ethylene glycol) groups and phosphorylcholine (PC) groups in the presence of different anions and applied potentials. Considerable effort has been made to illustrate the different effects of manipulating the antifouling properties of these two surfaces. We prepared polymer films by applying electropolymerization to two functionalized (3,4-ethylenedioxythiophene) polymers containing triethylene glycol and PC groups, respectively. A quartz crystal microbalance with dissipation (QCM-D) was employed to characterize the negatively charged bovine serum albumin and positively charged lysozyme adsorption as a function of ionic concentration in the presence of various Hofmeister anions. The frequency changes corresponded to the protein or ion adsorption/desorption behavior on the surface. The anions adsorbed on polymer films to effectively enhance the hydration layer of the polymer surface and reduce nonspecific protein binding. We further integrated a potentiostat with the QCM-D to control the protein adsorption/desorption behaviors by applying potentials, and we conducted an electrochemical QCM-D study. Most importantly, with the synergistic effect of ions and surface potential, a nearly fresh polymer surface was regenerated. This study describes principles to maintain and regenerate the antifouling properties of electrified surfaces, which are critical for implanted bioelectronics applications.

Electrochemical SERS for in Situ Monitoring the Redox States of PEDOT and Its Potential Application in Oxidant Detection

In response to recent developments for applying conducting polymers on various biomedical applications, the development of characterization techniques for evaluating the states of conducting polymers in liquids is beneficial to the applications of these materials. In this study, we propose a platform using electrochemical surface-enhanced Raman scattering (EC-SERS) technology, which allows a direct measurement of the redox states of conducing polymers in liquids. A thiophene-based conducting polymer, hydroxymethyl poly(3,4-ethylenedioxythiophene) or poly(EDOT-OH), was used to demonstrate this concept. Poly(EDOT-OH) films were coated on Au nanoparticle-coated ITO glass as SERS-active substrates. Taking the advantage of Raman enhancement, we can in situ and clearly monitor the redox behavior of poly(EDOT-OH) in aqueous solutions. The Raman peak intensity decreases as the poly(EDOT-OH) film is oxidized. Furthermore, we demonstrated our idea to utilize this phenomenon as the sensing mechanism for oxidant detection. The Raman intensity of conducting polymers reduces faster when oxidants exist, and we obtain a quantitative analysis for the detection of oxidants. Moreover, the oxidized poly(EDOT-OH) films can be reused for detection of oxidants simply by applying a reduction potential to activate the poly(EDOT-OH) films. The film stability was also confirmed, and the detection of two other oxidants, namely ammonium persulfate and iron chloride, were also demonstrated. The results show different SERS spectra of poly(EDOT-OH) films oxidized by using different oxidants. Besides, the oxidized films can be easily recovered simply by applying a cathodic potential, which allows repeating usage and makes it possible for continuous monitoring applications. To the best of our knowledge, this is the first time to apply PEDOT's Raman feature for detection purposes.

Critical Study of the Recognition between C-Reactive Protein and Surface-Immobilized Phosphorylcholine by Quartz Crystal Microbalance with Dissipation

C-reactive protein (CRP), a biomarker for cardiovascular disease, has been reported to have a strong affinity to zwitterionic phosphorylcholine (PC) groups in the presence of calcium ions. In addition, PC-immobilized surfaces have been used as a nonfouling coating to prevent nonspecific protein binding. By appropriately using the features of PC-immobilized surfaces, including specific recognition to CRP and nonfouling surface, it is reasonable to create an antibody-free biosensor for the specific capture of CRP. In this study, PC-functionalized 3,4-ethylenedioxythiophene (EDOT) monomers were used to prepare PC-immobilized surfaces. The density of PC groups on the surface can be fine-tuned by changing the composition of the monomer solutions for the electropolymerization. The density of PC group was confirmed by X-ray photoelectron spectroscopy (XPS). The specific interaction of CRP with PC groups was monitored by using a quartz crystal microbalance with dissipation (QCM-D). The amount of protein binding could be estimated by the reduction in frequency readout. Through the QCM-D measurement, we revealed the nonfouling property and the specific CRP capture from our PC-immobilized surfaces. Notably, the dissipation energy also dropped during the binding process between CRP and PC, indicating the release of water molecules from the PC groups during CRP adsorption. We anticipate that surface-bound water molecules are mainly released from areas near the immobilized PC groups. Based on Hofmeister series, we further examined the influence of ions by introducing four different anions including both kosmotrope (order maker) and chaotrope (disorder maker) into the buffer for the CRP binding test. The results showed that the concentration and the type of anions play an important role in CRP binding. The present fundamental study reveals deep insights into the recognition between CRP and surface-immobilized PC groups, which can facilitate the development of CRP sensing platforms.

Poly(3,4-ethylenedioxythiophene) (PEDOT) Derivatives: Innovative Conductive Polymers for Bioelectronics

Poly(3,4-ethylenedioxythiophene)s are the conducting polymers (CP) with the biggest prospects in the field of bioelectronics due to their combination of characteristics (conductivity, stability, transparency and biocompatibility). The gold standard material is the commercially available poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). However, in order to well connect the two fields of biology and electronics, PEDOT:PSS presents some limitations associated with its low (bio)functionality. In this review, we provide an insight into the synthesis and applications of innovative poly(ethylenedioxythiophene)-type materials for bioelectronics. First, we present a detailed analysis of the different synthetic routes to (bio)functional dioxythiophene monomer/polymer derivatives. Second, we focus on the preparation of PEDOT dispersions using different biopolymers and biomolecules as dopants and stabilizers. To finish, we review the applications of innovative PEDOT-type materials such as biocompatible conducting polymer layers, conducting hydrogels, biosensors, selective detachment of cells, scaffolds for tissue engineering, electrodes for electrophysiology, implantable electrodes, stimulation of neuronal cells or pan-bio electronics.