Influence of Graphene Reduction and Polymer Cross-Linking on Improving the Interfacial Properties of Multilayer Thin Films

ZnO nanoparticles coated and stearic acid modified superhydrophobic chitosan film for self-cleaning and oil-water separation

The aim of this study was to prepare superhydrophobic chitosan films using a ZnO nanoparticle coating and stearic acid hydrophobic modification. A 1 % concentration of ZnO nanoparticles and a 1 % concentration of stearic acid generated a superhydrophobic film with the largest contact angle (WCA) of 156°, which was attributed to the synergy of micro/nano-level hierarchical structure and low surface energy modification. The superhydrophobic film showed better stability to acid, alkali, heat, and UV irradiation than a neat chitosan film and a reduction in light transmittance of 14.4 % at 354 nm. The superhydrophobic chitosan film also showed excellent self-cleaning and oil-water separation performance. Our findings will expand the application of chitosan films in food packaging, outdoor self-cleaning materials and oil-water separations.

Effects of the Transfer Method and Interfacial Adhesion on the Frictional and Wear Resistance Properties of a Graphene-Coated Polymer

Graphene is a promising candidate used to reduce friction and wear in micro- and nano-device applications owing to its superior mechanical robustness and intrinsic lubrication properties. Herein, we report the frictional and wear resistance properties of a graphene-coated polymer and how they are affected by fabrication processes. The results show that graphene deposited on a polymer substrate effectively improves both frictional and wear resistance properties, and the degree of improvement significantly depends on the graphene transfer method and interfacial adhesion between graphene and the substrate. Dry-transferred graphene showed better improvement than wet-transferred graphene, and the strong adhesion of graphene achieved by imidazole treatment aided the improvement. A combined analysis of surface morphology and scratch trace shows that the graphene transfer method and graphene adhesion dominate the structural integrity of the transferred graphene, and the graphene/substrate interfacial adhesion plays a decisive role in the improvement of both properties by suppressing the delamination of graphene from the substrate during the nanoscratch test, thereby preventing crack formation in graphene and weakening the puckering effect.

Preparation of a superhydrophilic SiO2 nanoparticles coated chitosan-sodium phytate film by a simple ethanol soaking process

The development of environmentally friendly and transparent superhydrophilic food packaging materials is essential in our daily lives. The objective of this study was to develop a simple method of preparing a superhydrophilic, transparent, and biodegradable composite film. The composite film was obtained by soaking a chitosan-sodium phytate film in an ethanol solution of SiO₂ nanoparticles. The results showed that when the chitosan-sodium phytate film was coated with SiO₂ nanoparticles that were dissolved in 75% ethanol, its water contact angle (WCA) was reduced from 100° to 3°, and the film surface was changed from a hydrophobic to a superhydrophilic. Furthermore, the oxygen transmission rate (OTR) was significantly reduced, and the mechanical properties of the film were improved. The method is easy to carry out and can be used for the potential production of superhydrophilic materials.

Recent developments in layer-by-layer assembled systems application in water purification

Electrostatically-based layer-by-layer (LbL) assembly is a versatile surface functionalization technique allowing the construction of complex three-dimensional architectures on virtually any type of material using various combinations of nano-bricks. One of the most promising applications of LbL assembled systems is in water purification. The main two strategies developed in this purpose consist in either enhancing the barrier properties of separation membranes and in the construction of core-shell organic/inorganic sorbents. In this review, the recent achievements in this topic are discussed with respect to the use of LbL-based composites in desalination and removal of heavy metal ions or organic pollutants. Finally, some works dealing with economic aspects of using LbL assemblies for water purification are presented, thus highlighting forthcoming strategies to develop economically-viable materials for such applications.

The Role of Nanoparticle Shapes and Structures in Material Characterisation of Polyvinyl Alcohol (PVA) Bionanocomposite Films

Three different types of nanoparticles, 1D Cloisite 30B clay nanoplatelets, 2D halloysite nanotubes (HNTs), and 3D nanobamboo charcoals (NBCs) were employed to investigate the impact of nanoparticle shapes and structures on the material performance of polyvinyl alcohol (PVA) bionanocomposite films in terms of their mechanical and thermal properties, morphological structures, and nanomechanical behaviour. The overall results revealed the superior reinforcement efficiency of NBCs to Cloisite 30B clays and HNTs, owing to their typical porous structures to actively interact with PVA matrices in the combined formation of strong mechanical and hydrogen bondings. Three-dimensional NBCs also achieved better nanoparticle dispersibility when compared with 1D Cloisite 30B clays and 2D HNTs along with higher thermal stability, which was attributed to their larger interfacial regions when characterised for the nanomechanical behaviour of corresponding bionanocomposite films. Our study offers an insightful guidance to the appropriate selection of nanoparticles as effective reinforcements and the further sophisticated design of bionanocomposite materials.

Polymeric Graphene Bulk Materials with a 3D Cross-Linked Monolithic Graphene Network

Although many great potential applications are proposed for graphene, till now none are yet realized as a stellar application. The most challenging issue for such practical applications is to figure out how to prepare graphene bulk materials while maintaining the unique two-dimensional (2D) structure and the many excellent properties of graphene sheets. Herein, such polymeric graphene bulk materials containing three-dimensional (3D) cross-linked networks with graphene sheets as the building unit are reviewed. The theoretical research on various proposed structures of graphene bulk materials is summarized first. Then, the synthesis or fabrication of these graphene materials is described, which comprises mainly two approaches: chemical vapor deposition and cross-linking using graphene oxide directly. Finally, some exotic and exciting potential applications of these graphene bulk materials are presented.

Mechanically robust nanocomposites from screen-printable polymer/graphene nanosheet pastes

Innovative methods for producing graphene-based polymer nanocomposites with excellent mechanical robustness have become a focus for their practical utilization, existing solutions suffer from drawbacks such as limited laboratory-scale fabrication, affordability, and inadequate processability. To address these issues, we proposed a screen printing approach utilizing formulated graphene-modified water-based printable pastes to achieve inexpensive and scalable manufacturing of graphene-reinforced polymer nanocomposites. Leveraging this simple and versatile manufacturing process, mass production, as well as personalized-patterned bulk materials, can be efficiently produced using easily obtainable substrates. The surface-tailored graphene (PEI-rGO) can improve the dispersion quality and strengthen the interfacial bonding with a waterborne polyurethane (WPU) matrix, yielding an optimized enhancement effect and enhancing the tensile strength and Young's modulus about 9.46 and 19.8 times higher than those of the pure WPU, respectively. In particular, their utility as an anti-wear modifier through direct printing on textile and wear-reduction performance were investigated. Our study establishes screen printing as a general strategy to achieve facile fabrication of polymer nanocomposites at an industrial-scale in an economically viable manner, which can to a great extent bridge the gap between scientific research and real-world applications.

Chitosan-Sodium Phytate Films with a Strong Water Barrier and Antimicrobial Properties Produced via One-Step-Consecutive-Stripping and Layer-by-Layer-Casting Technologies

The pursuit of sustainable functional materials requires the development of materials based on renewable resources and efficient fabrication methods. Here, we first fabricated chitosan-sodium phytate films via one-step-stripping and layer-by-layer-casting technologies. The proposed film-fabrication methods are general, facile, environmentally benign, cost-effective, and easy to scale up. The resultant one-step-stripped film was thin (9 ± 1 μm), soft, transparent, and strong, whereas the thickness of the layer-by-layer-cast film was 70 ± 3 μm. FTIR analysis of the films indicated the formation of interactions between the phosphoric groups in sodium phytate and the amino groups in chitosan. More importantly, the water-vapor-permeability values of the one-step-stripped and cast films were 4-5 orders of magnitude lower than chitosan films reported before. Layer-by-layer-cast films in particular exhibited high tensile strength (49.21 ± 1.12 MPa) and were more than three times stronger than other polyelectrolyte multilayer films. Both types of films remained stable in an acidic environment. Furthermore, the layer-by-layer-assembled films presented greater antimicrobial activity than the stripped films. The developed chitosan-sodium phytate films can enhance several biomedical and environmental applications, such as packaging, drug delivery, diagnostics, microfluidics, and biosensing.