Cationically Substituted Bi0.7Fe0.3OCl Nanosheets as Li Ion Battery Anodes

Quasi-2D Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, Eu): reversible iodine intercalation and their evaluation as the anode in the lithium-ion battery system

Layered materials with a robust structure and reversible intercalation behavior are highly sought-after in applications involving energy conversion and storage systems, energy converting devices, supercapacitors, batteries, superconductors, photonic materials, and catalysis involving hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), solar cells and sensors. In the current study, quasi-2D rhombohedral Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples, synthesized by a solution combustion route, have been demonstrated to intercalate iodine reversibly. A solid-vapor reaction was employed to intercalate iodine at moderate temperatures, and deintercalation occurred on heating at higher temperatures. Expansion of the rhombohedral c-axis by ∼10 Å occurred, and the iodine between the interlayers existed as triiodide ions (I3-) in an unsymmetrical fashion. The amount of intercalated iodide has been determined from thermogravimetric analysis. Electron microscopic analysis confirmed these systems' intercalation and subsequent lattice expansion. In the diffuse reflectance spectra, charge transfer from the triiodide ions to the host oxide was noticed, and it caused the absorption edge to fall beyond the visible region for the intercalated samples. XPS analysis of iodine intercalated Bi0.775Pr0.225O1.5 has shown the mixed valence states for Pr and the existence of I3- along with some IO3- species. The quasi-2D structure was stable during the thermal deintercalation process. The evaluation of iodine intercalated Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples as anode material in the lithium-ion battery system has given quite promising results, exhibiting fast Li+-ion diffusion, low charge transfer resistance, good reversible capacity, capacity retention (after cycling back to 10 mA g-1), and structural stability (after long cycles).

Ferroelectric Polarization and Iron Substitution Synergistically Boost Electrocatalytic Oxygen Evolution Reaction in Bismuth Oxychloride Nanosheets

Ferroelectric materials have gained significant interest in various kinds of water splitting, but the study of ferroelectric materials for electrocatalytic water splitting is in its infancy. Ferroelectric materials have spontaneous polarization below their Curie temperature due to dipolar alignment, which results in surface charges. In 2D ferroelectric materials, spontaneous polarization depends on thickness. Herein, we report that thickness-dependent ferroelectric polarization in 2D nanosheets can also accelerate the oxygen evolution reaction (OER) along with the tailored active surface area of exposed crystalline facets, which improves the electrocatalytic activity relatively. Iron-substituted BiOCl nanosheets of varying thickness are fabricated by varying the pH using a facile coprecipitation method. The substituted iron enhances polarization and electrochemical active sites on the surface. The findings in this study show that the exposed (001) facet and higher thickness of the nanosheets have high ferroelectric polarization and, in turn, superior electrocatalytic activity and remarkable stability, requiring low overpotentials (348 mV and 270 mV at 100 mA/cm2 and 10 mA/cm2) in alkaline (1.0 M KOH) electrolyte. As the thickness of the nanosheets is decreased from 140 to 34 nm, the electrocatalytic performance of iron-substituted BiOCl nanosheets starts to reduce due to the lower Coulomb-Coulomb interaction and the increasing depolarization.

Hierarchical BiOCl flowerlike microspheres via a room-temperature solid-state chemical reaction as a new anode for rechargeable magnesium-ion batteries

Rechargeable magnesium-ion batteries (MIBs) have received much attention in recent years, but their development remains limited due to a lack of anode materials with high capacity and fast diffusion kinetics. Herein, for the first time, hierarchical BiOX (X = Cl, Br, I) flowerlike microspheres composed of interleaved nanosheets are constructed via a simple room-temperature solid-state chemical reaction as the anode for MIBs. Among them, BiOCl flowerlike microspheres deliver good cycling stability (110 mA h g^-1 after 100 cycles) and a superior rate capacity (134 mA h g^-1 at 500 mA g^-1). This is attributed to their unique flowerlike microsphere structure that not only accommodates a volume change to maintain their structural integrity but also shortens the ion-transport path to improve the diffusion rate. Importantly, ex situ tests were carried out to clarify the phase and structure evolution of the BiOCl flowerlike microspheres during cycling. The results show that BiOCl is first transformed to Bi and then alloyed to Mg₃Bi₂ in the discharging process, and Mg₃Bi₂ is turned back to Bi in the charging process. Besides, the initial microsphere structure is essentially maintained during the discharging/charging process, indicating the better stability of the structure. The current study demonstrates that the structural design of flowerlike microspheres is an effective strategy to develop promising anode materials for MIBs.

Crystal facet and Na-doping dual engineering ultrathin BiOCl nanosheets with efficient oxygen activation for enhanced photocatalytic performance

Photocatalytic oxidation (PCO) based on semiconductors offers a sustainable and promising way for environmental remediation. However, the photocatalytic performance currently suffers from weak light-harvesting ability, rapid charge combination and a lack of accessible reactive sites. Ultrathin two-dimensional (2D) materials are ideal candidates to overcome these problems and become hotpots in the research fields. Herein, we demonstrate an ultrathin (<4 nm thick) Na-doped BiOCl nanosheets with {001} facets (Na-BOC-001) fabricated via a facile bottom-up approach. Because of the synergistic effect of highly exposed active facets and optimal Na doping on the electronic and crystal structure, the Na-BOC-001 showed an upshifted conduction band (CB) with stronger reduction potential for O₂ activation, more defective surface for enhanced O₂ adsorption, as well as the highest visible-light driven charge separation and transfer ability. Compared with the bulk counterparts (BOC-010 and BOC-001), the largest amount of active species and the best photocatalytic performance for the tetracycline hydrochloride (TC) degradation were achieved for the Na-BOC-001 under visible-light irradiation, even though it had slightly weaker visible-light absorption ability. Moreover, the effect of the Na doping and crystal facet on the possible pathways for TC degradation was investigated. This work offers a feasible and economic strategy for the construction of highly efficient ultrathin 2D materials.

Bi-Based Electrode Materials for Alkali Metal-Ion Batteries

Alkali metal (Li, Na, K) ion batteries with high energy density are urgently required for large-scale energy storage applications while the lack of advanced anode materials restricts their development. Recently, Bi-based materials have been recognized as promising electrode candidates for alkali metal-ion batteries due to their high volumetric capacity and suitable operating potential. Herein, the latest progress of Bi-based electrode materials for alkali metal-ion batteries is summarized, mainly focusing on synthesis strategies, structural features, storage mechanisms, and the corresponding electrochemical performance. Particularly, the optimization of electrode-electrolyte interphase is also discussed. In addition, the remaining challenges and further perspectives of Bi-based electrode materials are outlined. This review aims to provide comprehensive knowledge of Bi-based materials and offer a guideline toward more applications in high-performance batteries.

The Rate Performance of Two-Dimensional Material-Based Battery Electrodes May Not Be as Good as Commonly Believed

Two-dimensional (2D) materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as non-2D materials for comparison. For each capacity-rate curve, we extract parameters that quantify performance which can then be analyzed using a simple mechanistic model. Contrary to expectations, by comparing a previously proposed figure of merit, we find 2D-based electrodes to be on average ∼40 times poorer in terms of rate performance than non-2D materials. This is not due to differences in solid-state diffusion times which were similarly distributed for 2D and non-2D materials. In fact, we found the main difference between 2D and non-2D materials is that ion mobility within the electrolyte-filled pores of the electrodes is significantly lower for 2D materials, a situation which we attribute to their high aspect ratios.

Li-Rich Li[Li1/6 Fe1/6 Ni1/6 Mn1/2 ]O2 (LFNMO) Cathodes: Atomic Scale Insight on the Mechanisms of Cycling Decay and of the Improvement due to Cobalt Phosphate Surface Modification

Lithium-rich Li[Li_1/6 Fe_1/6 Ni_1/6 Mn_1/2 ]O₂ (0.4Li₂ MnO₃ -0.6LiFe_1/3 Ni_1/3 Mn_1/3 O₂ , LFNMO) is a new member of the xLi₂ MnO₃ ·(1 - x)LiMO₂ family of high capacity-high voltage lithium-ion battery (LIB) cathodes. Unfortunately, it suffers from the severe degradation during cycling both in terms of reversible capacity and operating voltage. Here, the corresponding degradation occurring in LFNMO at an atomic scale has been documented for the first time, using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), as well as tracing the elemental crossover to the Li metal anode using X-ray photoelectron spectroscopy (XPS). It is also demonstrated that a cobalt phosphate surface treatment significantly boosts LFNMO cycling stability and rate capability. Due to cycling, the unmodified LFNMO undergoes extensive elemental dissolution (especially Mn) and O loss, forming Kirkendall-type voids. The associated structural degradation is from the as-synthesized R-3m layered structure to a disordered rock-salt phase. Prior to cycling, the cobalt phosphate coating is epitaxial, sharing the crystallography of the parent material. During cycling, a 2-3 nm thick disordered Co-rich rock-salt structure is formed as the outer shell, while the bulk material retains R-3m crystallography. These combined cathode-anode findings significantly advance the microstructural design principles for next-generation Li-rich cathode materials and coatings.