Aluminum ion chemistry of Na4Fe3(PO4)2(P2O7) for all-climate full Na-ion battery

Na4Fe3(PO4)2(P2O7) (NFPP) is currently drawing increased attention as a sodium-ion batteries (SIBs) cathode due to the cost-effective and NASICON-type structure features. Owing to the sluggish electron and Na+ conductivities, however, its real implementation is impeded by the grievous capacity decay and inferior rate capability. Herein, multivalent cation substituted microporous Na3.9Fe2.9Al0.1(PO4)2(P2O7) (NFAPP) with wide operation-temperature is elaborately designed through regulating structure/interface coupled electron/ion transport. Greatly, the derived Na vacancy and charge rearrangement induced by trivalent Al3+ substitution lower the ions diffusion barriers, thereby endowing faster electron transport and Na+ mobility. More importantly, the existing Al-O-P bonds strengthen the local environment and alleviate the volume vibration during (de)sodiation, enabling highly reversible valence variation and structural evolution. As a result, remarkable cyclability (over 10,000 loops), ultrafast rate capability (200 C), and exceptional all-climate stability (-40-60 °C) in half/full cells are demonstrated. Given this, the rational work might provide an actionable strategy to promote the electrochemical property of NFPP, thus unveiling the great application prospect of sodium iron mixed phosphate materials.

Unraveling the "Gap-Filling" Mechanism of Multiple Charge Carriers in Aqueous Zn-MoS2 Batteries

The utilization rate of active sites in cathode materials for Zn-based batteries is a key factor determining the reversible capacities. However, a long-neglected issue of the strong electrostatic repulsions among divalent Zn2+ in hosts inevitably causes the squander of some active sites (i.e., gap sites). Herein, we address this conundrum by unraveling the "gap-filling" mechanism of multiple charge carriers in aqueous Zn-MoS2 batteries. The tailored MoS2 /(reduced graphene quantum dots) hybrid features an ultra-large interlayer spacing (2.34 nm), superior electrical conductivity/hydrophilicity, and robust layered structure, demonstrating highly reversible NH4 + /Zn2+ /H+ co-insertion/extraction chemistry in the 1 M ZnSO4 +0.5 M (NH4 )2 SO4 aqueous electrolyte. The NH4 + and H+ ions can act as gap fillers to fully utilize the active sites and screen electrostatic interactions to accelerate the Zn2+ diffusion. Thus, unprecedentedly high rate capability (439.5 and 104.3 mAh g-1 at 0.1 and 30 A g-1 , respectively) and ultra-long cycling life (8000 cycles) are achieved.

Boosting the interfacial dynamics and thermodynamics in polyanion cathode by carbon dots for ultrafast-charging sodium ion batteries

Ultrafast-charging is the focus of next-generation rechargeable batteries for widespread economic success by reducing the time cost. However, the poor ion diffusion rate, intrinsic electronic conductivity and structural stability of cathode materials seriously hinder the development of ultrafast-charging technology. To overcome these challenges, an interfacial dynamics and thermodynamics synergistic strategy is proposed to synchronously enhance the fast-charging capability and structural stability of polyanion cathode materials. As a case study, a Na3V2(PO4)3 composite (NVP/NSC) is successfully obtained by introducing an interface layer derived from N/S co-doped carbon dots. Density functional theory calculations validate that the interfacial bonding effect of V-N/S-C significantly reduces the Na+ transport energy barrier. D-band center theory analysis confirms the downward shift of the V d-band center enhances the strength of the V-O bond and considerably inhibits irreversible phase transformation. Benefitting from this interfacial synergistic strategy, NVP/NSC achieves a high capability and excellent cycling stability with a surprisingly low carbon content (2.23%) at an extremely high rate of 100C for 10 000 cycles (87.2 mA h g-1, 0.0028% capacity decay per cycle). Furthermore, a superior performance at 5C (115.3 mA h g-1, 92.1% capacity retention after 800 cycles) is exhibited by the NVP/NSC‖HC full cell. These findings provide timely new insights for the systematic design of ultrafast-charging cathode materials.

High Voltage Ga-Doped P2-Type Na2/3 Ni0.2 Mn0.8 O2 Cathode for Sodium-Ion Batteries

Ni/Mn-based oxide cathode materials have drawn great attention due to their high discharge voltage and large capacity, but structural instability at high potential causes rapid capacity decay. How to moderate the capacity loss while maintaining the advantages of high discharge voltage remains challenging. Herein, the replacement of Mn ions by Ga ions is proposed in the P2-Na2/3 Ni0.2 Mn0.8 O2 cathode for improving their cycling performances without sacrificing the high discharge voltage. With the introduction of Ga ions, the relative movement between the transition metal ions is restricted and more Na ions are retained in the lattice at high voltage, leading to an enhanced redox activity of Ni ions, validated by ex situ synchrotron X-ray absorption spectrum and X-ray photoelectron spectroscopy. Additionally, the P2-O2 phase transition is replaced by a P2-OP4 phase transition with a smaller volume change, reducing the lattice strain in the c-axis direction, as detected by operando/ex situ X-ray diffraction. Consequently, the Na2/3 Ni0.21 Mn0.74 Ga0.05 O2 electrode exhibits a high discharge voltage close to that of the undoped materials, while increasing voltage retention from 79% to 93% after 50 cycles. This work offers a new avenue for designing high-energy density Ni/Mn-based oxide cathodes for sodium-ion batteries.

Quantitative biodistribution of nanoparticles in plants with lanthanide complexes

The inefficient distribution of fertilizers, nutrients, and pesticides on crops is a major challenge in modern agriculture that leads to reduced productivity and environmental pollution. Nanoformulation of agrochemicals is an attractive approach to enable the selective delivery of agents into specific plant organs, their release in those tissues, and improve their efficiency. Already commercialized nanofertilizers utilize the physiochemical properties of metal nanoparticles such as size, charge, and the metal core to overcome biological barriers in plants to reach their target sites. Despite their wide application in human diseases, lipid nanoparticles are rarely used in agricultural applications and a systematic screening approach to identifying efficacious formulations has not been reported. Here, we developed a quantitative metal-encoded platform to determine the biodistribution of different lipid nanoparticles in plant tissues. In this platform lanthanide metal complexes were encapsulated into four types of lipid nanoparticles. Our approach was able to successfully quantify payload accumulation for all the lipid formulations across the roots, stem, and leaf of the plant. Lanthanide levels were 20- to 57-fold higher in the leaf and 100- to 10,000-fold higher in the stem for the nanoparticle encapsulated lanthanide complexes compared to the unencapsulated, free lanthanide complex. This system will facilitate the discovery of nanoparticles as delivery carriers for agrochemicals and plant tissue-targeting products.

Difluoroethylene Carbonate as an Electrolyte Additive for Engineering the Electrolyte-Electrode Interphase of Lithium Metal Batteries

Difluoroethylene carbonate (DFEC) featuring abundant fluorine atoms has been proposed as a multifunctional electrolyte additive to boost the stability of the electrolyte-electrode interphase of lithium metal batteries. Thus, introducing the DFEC additive enables a high capacity retention rate of the Li||NCM811 full cell (up to 75% after 200 cycles) at 4.5 V high voltage.

Molecular Engineering of Highly Fluorinated Carbon Dots: Tailoring Li+ Dynamics and Interfacial Fluorination for Stable Solid Lithium Batteries

Fluorinated carbon dots (FCDs) have garnered interest owing to their distinct physicochemical properties. Nevertheless, intricate synthesis procedures and quite low fluorine doping levels limit its development and application. Herein, we propose a facile approach based on the Claisen-Schmidt reaction to realize gram-scale synthesis of highly fluorinated carbon dots (up to 20.79 at. %) at room temperature and atmospheric pressure, and a comprehensive exploration of the specific reaction mechanism is conducted. Furthermore, in consideration of the high fluorine content, good dispersibility, and compatibility with polymer electrolyte, the synthesized FCDs are utilized as an additive for PEO-based solid electrolytes of a Li battery to improve its ionic conductivity, interface stability, and mechanical properties. The introduction of FCDs can not only reduce the crystallinity of PEO and enhance the interaction of polymer chains, but also facilitate the establishment of uninterrupted pathways and in situ fluorination at the interface, which is substantiated by both theoretical calculations and experimental findings. As a result, the lithium symmetrical battery can operate stably for 1000 h at a current density of 0.4 mA cm-2. Simultaneously, the LiFePO4/Li battery utilizing the composite electrolyte exhibits a capacity of 130.3 mAh g-1 over 300 cycles while maintaining a capacity retention rate of 95.10%. This study develops a strategy for synthesizing highly fluorinated carbon dots, which demonstrate a useful influence on PEO electrolytes, thus boosting the advancement of FCDs and solid-state batteries.

Carbon dots from alcohol molecules: principles and the reaction mechanism

Carbon dots (CDs) have attracted significant attention in the energy, environment, and biology fields due to their exceptional physicochemical properties. However, owing to the multifarious precursors and complex reaction mechanisms, the production of carbon dots from organic molecules is still a mysterious process. Inspired by the color change of sodium hydroxide ethanol solution after standing for some time, in this work, we thoroughly investigated the reaction mechanism from alcohol molecules to carbon dots through a lot of experiments and theoretical calculations, and it was found that the rate-controlling reaction is the formation of aldehydes, and it is also confirmed that there is a self-catalysis reaction, which can accelerate the conversion from alcohol to aldehyde, further facilitating the final formation of CDs. After the rate-controlling reaction of alcohol to aldehyde, under strongly alkaline conditions, an aldol reaction occurs to form unsaturated aldehydes, followed by further condensation and polymerization reactions to form long carbon chains, which are cross-linked and dehydrated to form carbon dots with a carbon core and surface functional groups. Additionally, it is found that the reaction can be largely accelerated with the assistance of electricity, which indicates the great prospect of industrial production. Furthermore, the obtained CDs with rich functional groups can be utilized as electrolyte additives to optimize the deposition behavior of Na metal, manifesting great potential towards safe and stable Na metal batteries.

Electric-Eel-Type Bi-Ionic Gradient Battery

Electric eels generate electricity with a discharge voltage of up to 860 V under ionic gradients, providing a fascinating example to inspire viable and flexible power sources. However, hitherto reported eel-related devices are strictly restricted by complicated fabrication and environmental energy input. Herein, an electric-eel-type bi-ionic gradient battery (BGB) is performed by cationic and anionic polyelectrolyte hydrogels featuring simplified units and self-energy supply. Benefiting from ionic bonds with opposite charges in the polymer chain, bianion gradients as well as ion selective migration pathways are synchronously constructed and integrated units are enabled. As a result, an open-circuit voltage of 0.54 V and a short-circuit current density of 13 μA cm-2 are generated by a BGB unit. Moreover, a voltage output up to 60 V is derived from integrated BGB devices, demonstrating the potential to drive wearable and implantable electronics. In this case, these artificial electric systems could overcome the great challenges of environmentally friendly, biocompatible, low-cost, and soft power sources, providing in-depth insights into the development of clean and sustainable power generation technologies.

Post-Substitution Modulated Robust Sodium Layered Oxides

Sodium layered oxides feature in high capacity and diverse composition, however, are plagued by various issues including limited kinetics and interfacial instability with residual alkali. Conventional substitution/doping and heterogeneous coating are promising to tackle the problems of bulk and surface, respectively, but normally insufficient to address both. Herein, a post-substitution strategy is proposed to modify primary sodium-layered-oxide particles that can simultaneously deal with bulk and surficial issues. As a typical example, post Ti-substitution for O3-NaNi1/3 Fe1/3 Mn1/3 O2 is successfully performed by adjusting thermodynamic driving force, resulting in depth-controllable Ti infusion from surface to bulk, as proved by energy dispersive spectroscopy maps collected at the cross-section. Residual alkali species are efficiently diminished and benefited from the surface-to-bulk osmotic reaction, significantly improving Coulombic efficiency. Moreover, remarkable enhancements in reversible capacity (135 mAh g-1 at C/10), rate capability (74% retention at 5 C), and long-term cycling stability (80% retention after 300 cycles at 2 C) are achieved by manipulating gradient-like Ti distribution in a primary particle that brings with increased kinetics and strengthened interfacial stability, surpassing those given by rough heterotic coating and homogeneous Ti-substitution. Such post-substitution is expected to provide a universal strategy to modify primary layered-oxide particles for developing advanced cathode materials of SIBs.

Gender equity of authorship in pulmonary medicine over the past decade

BACKGROUND

Gender disparity in authorship broadly persists in medical literature, little is known about female authorship within pulmonary medicine.

METHODS

A bibliometric analysis of publications from 2012 to 2021 in 12 journals with the highest impact in pulmonary medicine was conducted. Only original research and review articles were included. Names of the first and last authors were extracted and their genders were identified using the Gender-API web. Female authorship was described by overall distribution and distribution by country/region/continent and journal. We compared the article citations by gender combinations, evaluated the trend in female authorship, and forecasted when parity for first and last authorship would be reached. We also conducted a systematic review of female authorship in clinical medicine.

RESULTS

14,875 articles were included, and the overall percentage of female first authors was higher than last authors (37.0% vs 22.2%, p<0.001). Asia had the lowest percentage of female first (27.6%) and last (15.2%) authors. The percentages of female first and last authors increased slightly over time, except for a rapid increase in the COVID-19 pandemic periods. Parity was predicted in 2046 for the first authors and 2059 for the last authors. Articles with male authors were cited more than articles with female authors. However, male-male collaborations significantly decreased, whereas female-female collaborations significantly increased.

CONCLUSIONS

Despite the slow improvement in female authorship over the past decade, there is still a substantial gender disparity in female first and last authorship in high-impact medical journals in pulmonary medicine.

Interfacial Mo-S-C Bond with High Reversibility for Advanced Alkali-Ion Capacitors: Strategies for High-Throughput Production

The high-throughput scalable production of low-cost and high-performance electrode materials that work well under high power densities required in industrial application is full of challenges for the large-scale implementation of electrochemical technologies. Here, motivated by theoretical calculation that Mo-S-C heterojunction and sulfur vacancies can reduce the energy band gap, decrease the migration energy barrier, and improve the mechanical stability of MoS2 , the scalable preparation of inexpensive MoS2-x @CN is contrived by employing natural molybdenite as precursor, which is characteristic of high efficiency in synthesis process and energy conservation and the calculated costs are four orders of magnitude lower than MoS2 /C in previous work. More importantly, MoS2- x @CN electrode is endowed with impressive rate capability even at 5 A g-1 , and ultrastable cycling stability during almost 5000 cycles, which far outperform chemosynthesis MoS2 materials. Obtaining the full SIC cell assembled by MoS2- x @CN anode and carbon cathode, the energy/power output is high up to 265.3 W h kg-1 at 250 W kg-1 . These advantages indicate the huge potentials of the designed MoS2- x @CN and of mineral-based cost-effective and abundant resources as anode materials in high-performance AICs.

Reconstructing Hydrogen Bond Network Enables High Voltage Aqueous Zinc-Ion Supercapacitors

High-voltage aqueous rechargeable energy storage devices with safety and high specific energy are hopeful candidates for the future energy storage system. However, the electrochemical stability window of aqueous electrolytes is a great challenge. Herein, inspired by density functional theory (DFT), polyethylene glycol (PEG) can interact strongly with water molecules, effectively reconstructing the hydrogen bond network. In addition, N, N-dimethylformamide (DMF) can coordinate with Zn2+ , assisting in the rapid desolvation of Zn2+ and stable plating/stripping process. Remarkably, by introducing PEG400 and DMF as co-solvents into the electrolyte, a wide electrochemical window of 4.27 V can be achieved. The shift in spectra indicate the transformation in the number and strength of hydrogen bonds, verifying the reconstruction of hydrogen bond network, which can largely inhibit the activity of water molecule, according well with the molecular dynamics simulations (MD) and online electrochemical mass spectroscopy (OEMS). Based on this electrolyte, symmetric Zn cells survived up to 5000 h at 1 mA cm-2 , and high voltage aqueous zinc ion supercapacitors assembled with Zn anode and activated carbon cathode achieved 800 cycles at 0.1 A g-1 . This work provides a feasible approach for constructing high-voltage alkali metal ion supercapacitors through reconstruction strategy of hydrogen bond network.

Chelate-Capped Nano-AgZn3 Dual Interphase Remodeling the Local Environment for Reversible Dendrite-Free Zinc Anode

Rechargeable aqueous zinc-ion batteries (AZIBs) are among the most promising candidates for next-generation energy-storage devices. However, the large voltage polarisation and infamous dendrite growth hinder the practical application of AZIBs owing to their complex interfacial electrochemical environment. In this study, a hydrophobic zinc chelate-capped nano-silver (HZC-Ag) dual interphase is fabricated on the zinc anode surface using an emulsion-replacement strategy. The multifunctional HZC-Ag layer remodels the local electrochemical environment by facilitating the pre-enrichment and de-solvation of zinc ions and inducing homogeneous zinc nucleation, thus resulting in reversible dendrite-free zinc anodes. The zinc deposition mechanism on the HZC-Ag interphase is elucidated by density functional theory (DFT) calculations, dual-field simulations, and in situ synchrotron X-ray radiation imaging. The HZC-Ag@Zn anode exhibited superior dendrite-free zinc stripping/plating performance and an excellent lifespan of >2000 h with ultra-low polarisation of ≈17 mV at 0.5 mA cm-2 . Full cells coupled with a MnO2 cathode showed significant self-discharge inhibition, excellent rate performance, and improved cycling stability for >1000 cycles. Therefore, this multifunctional dual interphase may contribute to the design and development of dendrite-free anodes for high-performance aqueous metal-based batteries.

Engineering Functionalized 2D Metal-Organic Frameworks Nanosheets with Fast Li+ Conduction for Advanced Solid Li Batteries

Solid-state batteries can ensure high energy density and safety in lithium metal batteries, while polymer electrolytes are plagued by slow ion kinetics and low selective transport of Li+ . Metal-organic frameworks (MOFs) are proposed as emerging fillers for solid-state poly(ethylene oxide)(PEO) electrolytes, however, developing functionalized MOFs and understanding their roles on ion transfer has proven challenging. Herein, combining computational and experimental results, the functional group regulation in MOFs can effectively change surficial charge distribution and limit anion movement is revealed, providing a potential solution to these issues. Specifically, functionalized 2D MOF sheets are designed through molecular engineering to construct high-performance composite electrolytes, where the electron-donating effect of substituents in 2D-MOFs effectively limits the movement of ClO4 - and promotes mechanical properties and ion migration numbers (0.36 up to 0.64) of PEO. As a result, Li/Li cells with composite electrolyte exhibit superior cyclability for 1000 h at a current density of 0.2 mA cm-2 . Meanwhile, the solid LiFePO4 /Li battery delivers highly reversible capacities of 148.8 mAh g-1 after 200 cycles. These findings highlight a new approach for anion confinement through the use of functional group electronic effects, leading to enhanced ionic conductivity, and a feasible direction for high-performance solid-state batteries.

Ice-Template-Induced Highly Interconnected Porous Polymer Gel Electrolytes for Dendrite-Free Flexible Zinc-Air Batteries

Improving the performance of quasi-solid-state gel polymer electrolytes is critical for addressing issues at the Zn anode-electrolyte interface of high-performance flexible Zn-air batteries (FZABs). In this study, a highly interconnected porous poly(vinyl alcohol)/poly(ethylene glycol) (PVA/PEG) hydrogel electrolyte was fabricated via an ice-crystal template for FZABs. The mechanical toughness and stability of the gel electrolytes can be reinforced by the formation of a PEG-PVA cross-linking network. The three-dimensional PVA/PEG porous skeleton greatly increased electrolyte uptake and accelerated ion transport, leading to high ionic conductivity (42.5 mS cm-1). In-situ synchrotron radiation X-ray imaging revealed that the PVA/PEG network can effectively inhibit dendrite growth and the hydrogen evolution reaction. The assembled FZABs exhibited superior cycle stability, high power density (109 mW cm-3), and excellent flexibility and structural stability under bending conditions, thus showing great potential for future applications in flexible and wearable electronic device technologies.

Molecular-Enhanced Raman Spectroscopy Driven by Phosphoester Electron-Transfer Bridge

Although both electromagnetic and charge transfer (CT) mechanisms play a role in surface-enhanced Raman scattering (SERS), the contribution of the latter is limited by poor CT efficiency. Herein, we propose molecular-enhanced Raman spectroscopy (MERS) for the first time and develop a simple strategy to induce strong CT-enhanced Raman signals using a phosphoester (POE) electron-transfer bridge. Consequently, an excellent POE-enhanced Raman effect was found when various mono-, bis-, and trisaminobenzene compounds were used as probe analytes. Quantification analysis of this MERS effect revealed that the enhancement ratio and factor of the POE molecules can be up to 87% and ∼109, respectively. Spectroscopic analysis and density functional theory calculation confirmed that this effect was because of the formation of intermolecular hydrogen bonds, which promotes CT via electronic reorganization and enhances the Raman signals of target analytes. These results demonstrate the feasibility of MERS for highly CT-enhanced Raman signals.

Interfacial Interaction of Multifunctional GQDs Reinforcing Polymer Electrolytes For All-Solid-State Li Battery

Solid-state polymer electrolytes are highly anticipated for next generation lithium ion batteries with enhanced safety and energy density. However, a major disadvantage of polymer electrolytes is their low ionic conductivity at room temperature. In order to enhance the ionic conductivity, here, graphene quantum dots (GQDs) are employed to improve the poly (ethylene oxide) (PEO) based electrolyte. Owing to the increased amorphous areas of PEO and mobility of Li+ , GQDs modified composite polymer electrolytes achieved high ionic conductivity and favorable lithium ion transference numbers. Significantly, the abundant hydroxyl groups and amino groups originated from GQDs can serve as Lewis base sites and interact with lithium ions, thus promoting the dissociation of lithium salts and providing more ion pathways. Moreover, lithium dendrite is suppressed, associated with high transference number, enhanced mechanical properties and steady interface stability. It is further observed that all solid-state lithium batteries assembled with GQDs modified composite polymer electrolytes display excellent rate performance and cycling stability.

High-Entropy Na-Deficient Layered Oxides for Sodium-Ion Batteries

Sodium layered oxides always suffer from sluggish kinetics and deleterious phase transformations at deep-desodiation state (i.e., >4.0 V) in O3 structure, incurring inferior rate capability and grievous capacity degradation. To tackle these handicaps, here, a configurational entropy tuning protocol through manipulating the stoichiometric ratios of inactive cations is proposed to elaborately design Na-deficient, O3-type Na_xTmO₂ cathodes. It is found that the electrons surrounding the oxygen of the TmO₆ octahedron are rearranged by the introduction of MnO₆ and TiO₆ octahedra in Na-deficient O3-type Na_0.83Li_0.1Ni_0.25Co_0.2Mn_0.15Ti_0.15Sn_0.15O_2-δ (MTS15) with expanded O-Na-O slab spacing, giving enhanced Na⁺ diffusion kinetics and structural stability, as disclosed by theoretical calculations and electrochemical measurements. Concomitantly, the entropy effect contributes to the improved reversibility of Co redox and phase-transition behaviors between O3 and P3, as clearly revealed by ex situ synchrotron X-ray absorption spectra and in situ X-ray diffraction. Notably, the prepared entropy-tuned MTS15 cathode exhibits impressive rate capability (76.7% capacity retention at 10 C), cycling stability (87.2% capacity retention after 200 cycles) with a reversible capacity of 109.4 mAh g^-1, good full-cell performance (84.3% capacity retention after 100 cycles), and exceptional air stability. This work provides an idea for how to design high-entropy sodium layered oxides for high-power density storage systems.

Multiscale Crystal Field Effect for High-Performance Ultrahigh-Ni Layered Cathode

Further popularization of ultrahigh-Ni layered cathodes for high-energy lithium-ion batteries (LIBs) is hampered by their grievous structural and interfacial degeneration upon cycling. Herein, by leveraging the strong electronegativity and low solubility properties of Sb element, a multifunctional modification that couples atomic/microstructural reconstruction with interfacial shielding is well designed to improve the LiNi_0.94Co_0.04Al_0.02O₂ (NCA) cathode by combining Sb⁵⁺ doping and Li₇SbO₆ coating. Notably, a robust O framework is established by regulating local O coordination owing to the incorporation of a strong Sb-O covalence bond, leading to the inhibited lattice O evolution at high voltage, as revealed by synchrotron X-ray absorption spectroscopy. Moreover, the radially aligned primary particles with (003) crystallographic texture and refined/elongated sizes are achieved by the pinning of Sb on grain boundaries and are confirmed by scanning transmission electron microscopy, resulting in the fast Li⁺ diffusion and mitigated particle cracking. Additionally, in situ construction of the Li₇SbO₆ ionic conductive layer on grain boundaries can effectively boost interfacial stability and Li⁺ kinetics. As a result, the optimal Sb-modified NCA delivers a high capacity retention of 94.6% after 200 cycles at 1 C and a good rate capacity of 183.9 mAh g^-1 at 10 C, which is expected to be applied to next-generation advanced LIBs.

Advanced NASICON-Type Na4Fe3(PO4)2(P2O7) Cathode for High-Performance Na+/Li+ Batteries

Na₄Fe₃(PO₄)₂(P₂O₇) (NFPP) is an attractive candidate for Na⁺ batteries (SIBs) and Li⁺ batteries (LIBs). However, the real implementation of NFPP has been critically restrained by the inferior intrinsic electronic conductivity. Herein, in situ carbon-coated mesoporous NFPP, obtained via freeze drying and heat treatment, demonstrates highly reversible insertion/extraction of Na⁺/Li⁺. Mechanically, the electronic transmission and structural stabilities of NFPP are significantly enhanced by the graphitized carbon coating layer. Chemically, the porous nanosized structure shortens Na⁺/Li⁺ diffusion paths and increases the contact area between the electrolyte and NFPP, ultimately rendering fast ion diffusion. Greatly, long-lasting cyclability (88.5% capacity retention for over 5000 cycles), decent thermal stability at 60 °C, and impressive electrochemical performances are demonstrated in LIBs. The insertion/extraction mechanisms of NFPP in both SIBs and LIBs are systematically investigated, confirming its small volume expansion and high reversibility. The superior electrochemical performances and the insertion/extraction mechanism investigation confirm the feasibility of utilizing NFPP as a cathode material for Na⁺/Li⁺ batteries.

Trapping Lithium Selenides with Evolving Heterogeneous Interfaces for High-Power Lithium-Ion Capacitors

Transition metal selenides anodes with fast reaction kinetics and high theoretical specific capacity are expected to solve mismatched kinetics between cathode and anode in Li-ion capacitors. However, transition metal selenides face great challenges in the dissolution and shuttle problem of lithium selenides, which is the same as Li-Se batteries. Herein, inspired by the density functional theory calculations, heterogeneous can enhance the adsorption of Li₂ Se relative to single component selenide electrodes, thus inhibiting the dissolution and shuttle effect of Li₂ Se. A heterostructure material (denoted as CoSe₂ /SnSe) with the ability to evolve continuously (CoSe₂ /SnSe→Co/Sn→Co/Li₁₃ Sn₅ ) is successfully designed by employing CoSnO₃ -MOF as a precursor. Impressively, CoSe₂ /SnSe heterostructure material delivers the ultrahigh reversible specific capacity of 510 mAh g^-1 after 1000 cycles at the high current density of 4 A g^-1 . In situ XRD reveals the continuous evolution of the interface based on the transformation and alloying reactions during the charging and discharging process. Visualizations of in situ disassembly experiments demonstrate that the continuously evolving interface inhibits the shuttle of Li₂ Se. This research proposes an innovative approach to inhibit the dissolution and shuttling of discharge intermediates (Li₂ Se) of metal selenides, which is expected to be applied to metal sulfides or Li-Se and Li-S energy storage systems.

Electrochemically Engineering a Single-Crystal Nickel-Rich Layered Cathode

Nickel-rich layered electrode material has been attracting significant attention owing to its high specific capacity as a cathode for lithium-ion batteries. Generally, the high-nickel ternary precursors obtained by traditional coprecipitation methods are micron-scale. In this work, the submicrometer single-crystal LiNi_0.8Co_0.1Mn_0.1O₂ (NCM) cathode is efficiently prepared by electrochemically anodic oxidation followed by a molten-salt-assisted reaction without the need of extreme alkaline environments and complex processes. More importantly, when prepared under optimal voltage (10 V), single-crystal NCM exhibits a moderate particle size (∼250 nm) and strong metal-oxygen bonds due to reasonable and balanced crystal nucleation/growth rate, which are conducive to greatly enhancing the Li⁺ diffusion kinetics and structure stability. Given that a good discharge capacity of 205.7 mAh g^-1 at 0.1 C (1 C = 200 mAh g^-1) and a superior capacity retention of 87.7% after 180 cycles at 1 C are obtained based on the NCM electrode, this strategy is effective and flexible for developing a submicrometer single-crystal nickel-rich layered cathode. Besides, it can be adopted to elevate the performance and utilization of nickel-rich cathode materials.

Improved Capacitive Energy Storage Nanocomposites at High Temperature Utilizing Ultralow Loading of Bimetallic MOF

It is urgent to develop high-temperature dielectrics with high energy density and high energy efficiency for next-generation capacitor demands. Metal-organic frameworks (MOFs) have been widely used due to their structural diversity and functionally adaptable properties. Doping of metal nodes in MOFs is an effective strategy to change the band gap and band edge positions of the original MOFs, which helps to improve their ability to bind charges as traps. In this work, the incorporation of ultralow loading (<1.5 wt%) of novel bimetallic MOFs (ZIF 8-67) into the polyetherimide (PEI) polymer matrix is exhibited. With the addition of ZIF 8-67, the breakdown strength and energy storage capacity of ZIF 8-67/PEI nanocomposites are significantly improved, especially at high temperatures (200 °C). For example, the energy densitiy of the 0.5 wt% ZIF 8-67/PEI nanocomposite is up to 2.96 J cm^-3 , with an efficiency (η) > 90% at 150 °C. At 200 °C, the discharge energy density of 0.25 wt% ZIF 8-67/PEI nanocomposites can still reach 1.84 J cm^-3 with a η > 90%, which is nine times higher than that of pure PEI (0.21 J cm^-3 ) under the same conditions, and it is the largest improvement compared with the previous reports.

Electric Eel Biomimetics for Energy Storage and Conversion

The electric eel is known as the most powerful creature to generate electricity with a discharge voltage up to 860 V and peak current up to 1 A. These surprising properties are the results of billions of years of evolution on the electrical biological structure and bulk, and now have triggered great research interest in electric eel biomimetics for designing innovated configurations and components of energy storage and conversion devices. In this review, first, the bioelectrical behavior of electric eels is surveyed, followed by the physiological structure to reveal the discharge characteristics and principles of electric organs and electrocytes. Additionally, underlying electrochemical mechanisms and models for calculating the potential and current of electrocytes are presented. Central to this review is the recent progress of electric-eel-inspired innovations and applications for energy storage and conversion, particularly including novel power sources, triboelectric nanogenerators, and nanochannel ion-selective membranes for salinity gradient energy harvesting. Finally, insights on the challenges at the moment and the perspectives on the future research prospects are critically compiled. It is suggested that energy-related electric eel biomimetics will greatly boost the development of next-generation high performance, green, and functional electronics.

Novel Nonstoichiometric Niobium Oxide Anode Material with Rich Oxygen Vacancies for Advanced Lithium-Ion Capacitors

Given the inherent features of open tunnel-like structures, moderate lithiation potential (1.0-3.0 V vs Li/Li⁺), and reversible redox couples (Nb⁵⁺/Nb⁴⁺ and Nb⁴⁺/Nb³⁺ redox couples), niobium-based oxides with Wadsley-Roth crystallographic shear structure are promising anode materials. However, their practical rate capability and cycling stability are still hindered by low intrinsic electronic conductivity and structural stability. Herein, ultrathin carbon-confined Nb₁₂O₂₉ materials with rich oxygen vacancies (Nb₁₂O_29-x@C) were designed and synthesized to address above-mentioned challenges. Computational simulations combined with experiments reveal that the oxygen vacancies can regulate the electronic structure to increase intrinsic electronic conductivity and reduce the Li⁺ diffusion barrier. Meanwhile, the carbon coating can enhance structural stability and further improve the electronic conductivity of the Nb₁₂O₂₉ material. As a result, the as-prepared Nb₁₂O_29-x@C exhibits high reversible capacity (226 mAh g^-1 at 0.1 A g^-1), excellent high-rate performance (83 mAh g^-1 at 5.0 A g^-1), and durable cycling life (98.1% capacity retention at 1.0 A g^-1 after 3000 cycles). The lithium storage mechanism and structural stability of Nb₁₂O_29-x@C were also revealed by in situ X-ray diffraction (XRD), ex situ X-ray photoelectron spectroscopy (XPS), and ex situ Raman spectroscopy. When applied as the anode of lithium-ion capacitors (LICs), the as-built LIC achieves high energy density (72.4 Wh kg^-1) within the voltage window of 0.01-3.5 V, demonstrating the practical application potential of the Nb₁₂O_29-x@C materials.

Aerophilic Triphase Interface Tuned by Carbon Dots Driving Durable and Flexible Rechargeable Zn-Air Batteries

Efficient bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are vital for rechargeable Zn-air batteries (ZABs). Herein, an oxygen-respirable sponge-like Co@C-O-Cs catalyst with oxygen-rich active sites was designed and constructed for both ORR and OER by a facile carbon dot-assisted strategy. The aerophilic triphase interface of Co@C-O-Cs cathode efficiently boosts oxygen diffusion and transfer. The theoretical calculations and experimental studies revealed that the Co-C-COC active sites can redistribute the local charge density and lower the reaction energy barrier. The Co@C-O-Cs catalyst displays superior bifunctional catalytic activities with a half-wave potential of 0.82 V for ORR and an ultralow overpotential of 294 mV at 10 mA cm-2 for OER. Moreover, it can drive the liquid ZABs with high peak power density (106.4 mW cm-2), specific capacity (720.7 mAh g-1), outstanding long-term cycle stability (over 750 cycles at 10 mA cm-2), and exhibits excellent feasibility in flexible all-solid-state ZABs. These findings provide new insights into the rational design of efficient bifunctional oxygen catalysts in rechargeable metal-air batteries.

[Identification of Stigma Specific Expression Fragment in the Promoter of a Soybean Chitinase Class I Gene]

The expression level of heterologous genes in transgenic plants serves as an important indicator of gene efficiency. The small number of currently known effective promoters, limits the possibilities in fine-tuning the expression of transgenes. We cloned and characterized a tissue-specific promoter fragment of the soybean chitinase class I gene (GmChi1). The GmChi1 promoter (GmChi1P) was cloned from Jungery soybean. The promoter sequence contains a number of putative cis-acting elements, including tissue-specific and stress-regulated motifs. By histochemical analysis, the GmChi1P-controlled β-glucuronidase (GUS) reporter enzyme activity was shown to be highest in the roots of transgenic Nicotiana tabacum cv. NC89 at the four-leaf sprout formation stage. Interestingly, the high GUS activity in transgenic tobacco roots was effectively suppressed by salicylic acid (SA) treatment. Deletion analysis of GmChi1P revealed that the sequences located between positions -719 and -382 contain key cis-elements responsible for the reporter uidA gene expression (encoding GUS) in leaves, roots, and wounds of Nicotiana tabacum. In addition, fluorometric analysis showed that the activity of the shortened ChiP(-1292) to ChiP(-719) promoters in the roots of transgenic tobacco was significantly suppressed by abscisic acid and completely suppressed by SA. The ChiP(-382) promoter was also found to be expressed exclusively in the stigma of transgenic tobacco flowers. Using the GUS reporter enzyme, no staining was detected in other flower organs in transgenic Nicotiana tabacum, including sepals, petals, anthers, filaments, and ovaries, or in any vegetative tissues. The results indicate that the promoter fragment ChiP(-382) can be used in tissue-specific regulation of gene expression and plant genetic engineering.

Regulation of the Electrochemical Plating/Stripping Process for Zn: Multifunctional Effects of N, S-Codoped Carbon Dots

The aqueous zinc-ion battery is considered as one of the best alternatives to lithium-ion batteries due to its low cost and high safety. However, the inevitable dendrite growth, byproduct formation, and the side reactions have inhibited the application of aqueous zinc-ion batteries. In this work, the electronegative nitrogen and sulfur-codoped carbon dots (NSCDs) are proposed as an electrolyte additive to regulate the uniform distribution of zinc ions and inhibit the growth of dendrites. It was found that only a small amount of NSCD additive (0.2 mg mL^-1) exerted a significant influence in electrochemical performance; the symmetrical cell can operate stably for 2000 h with a low voltage hysteresis of 33 mV at the current density of 1 mA cm^-2, and a high Coulombic efficiency (CE) of 99.5% can be obtained after 250 cycles.

Sex differences in the mouse photothrombotic stroke model investigated with X-ray fluorescence microscopy and Fourier transform infrared spectroscopic imaging

Stroke is a leading cause of death and disability around the world. To date, the majority of pre-clinical research has been performed using male lab animals and results are commonly generalized to both sexes. In clinical stoke cases females have a higher incidence of ischemic stroke and poorer outcomes, compared to males. Best practices for improving translatability of findings for stroke, encourage the use of both sexes in studies. Since estrogen and progesterone have recognized neuroprotective effects, it is important to compare the size, severity and biochemical composition of the brain tissue following stroke in female and male animal models. In this study a photothrombotic focal stroke was induced in male and female mice. Vaginal secretions were collected twice daily to track the stage of estrous. Mice were euthanized at 24 h post-stroke. Histological staining, Fourier transform infrared imaging and X-ray fluorescence imaging were performed to better define the size and metabolic markers in the infarct core and surrounding penumbra. Our results show while the female mice had a significantly lower body mass than males, the cross-sectional area of the brain and the size of infarct and penumbra were not significantly different between the groups. In addition to the general expected sex-linked differences of altered NADH levels between males and females, estrus females had significantly elevated glycogen in the penumbra compared with males and total phosphorus levels were noted to be higher in the penumbra of estrus females. Elevated glycogen reserves in the tissue bordering the infarct core in females may present alternatives for improved functional recovery in females in the early post-stroke phase.

Structure/Interface Coupling Effect for High-Voltage LiCoO2 Cathodes

LiCoO₂ (LCO) is widely applied in today's rechargeable battery markets for consumer electronic devices. However, LCO operations at high voltage are hindered by accelerated structure degradation and electrode/electrolyte interface decomposition. To overcome these challenges, co-modified LCO (defined as CB-Mg-LCO) that couples pillar structures with interface shielding are successfully synthesized for achieving high-energy-density and structurally stable cathode material. Benefitting from the "Mg-pillar" effect, irreversible phase transitions are significantly suppressed and highly reversible Li⁺ shuttling is enabled. Interestingly, bonding effects between the interfacial lattice oxygen of CB-Mg-LCO and amorphous Co_x B_y coating layer are found to elevate the formation energy of oxygen vacancies, thereby considerably mitigating lattice oxygen loss and inhibiting irreversible phase transformation. Meanwhile, interface shielding effects are also beneficial for mitigating parasitic electrode/electrolyte reactions, subsequent Co dissolution, and ultimately enable a robust electrode/electrolyte interface. As a result, the as-designed CB-Mg-LCO cathode achieves a high capacity and excellent cycle stability with 94.6% capacity retention at an extremely high cut-off voltage of 4.6 V. These findings provide new insights for cathode material modification methods, which serves to guide future cathode material design.

Metal-Organic Framework Materials for Electrochemical Supercapacitors

Exploring new materials with high stability and capacity is full of challenges in sustainable energy conversion and storage systems. Metal-organic frameworks (MOFs), as a new type of porous material, show the advantages of large specific surface area, high porosity, low density, and adjustable pore size, exhibiting a broad application prospect in the field of electrocatalytic reactions, batteries, particularly in the field of supercapacitors. This comprehensive review outlines the recent progress in synthetic methods and electrochemical performances of MOF materials, as well as their applications in supercapacitors. Additionally, the superiorities of MOFs-related materials are highlighted, while major challenges or opportunities for future research on them for electrochemical supercapacitors have been discussed and displayed, along with extensive experimental experiences.

Enabling Reversible Reaction by Uniform Distribution of Heterogeneous Intermediates on Defect-Rich SnSSe/C Layered Heterostructure for Ultralong-Cycling Sodium Storage

2D layered Sn-based materials have attracted enormous attention due to their remarkable performance in sodium-ion batteries. Nevertheless, this promising candidate involves a complex Na⁺ -storage process with multistep conversion-alloying reactions, which induces the uneven dispersion of heterogeneous intermediate accompanied by severe agglomeration of metallic Sn⁰ , inescapably resulting in poor reaction reversibility with sluggish rate capability and inferior cyclic lifespan. Herein, a delicately layered heterostructure SnSSe/C consisting of defect-rich SnSSe and graphene is designed and successfully achieved via a facile hydrothermal process. The equal anionic substitution of Se in SnSSe crystal can trigger numerous defects, which can not only facilitate Na⁺ diffusion but also accelerate the nucleation process by inducing quantum-dot-level uniform distribution of heterogeneous intermediates, Na₂ Se/Na₂ S and Sn⁰ . Concurrently, in situ formed uniform Na₂ Se/Na₂ S grain boundaries confined by this unique layered heterostructure may effectively suppress the agglomeration of metallic Sn⁰ nanograins and boost the reversibility of conversion-alloying reaction. As a result, the SnSSe/C displays significant improvement in Na-storage performance, in terms of remarkable rate capability and ultralong cycling lifespan. This work, focusing on controlling intermediate distribution, provides an effective strategy to boost reaction reversibility, which can be wildly employed in conversion-based electrodes for energy storage regions.

Natural Stibnite for Lithium-/Sodium-Ion Batteries: Carbon Dots Evoked High Initial Coulombic Efficiency

The chemical process of local oxidation-partial reduction-deep coupling for stibnite reduction of carbon dots (CDs) is revealed by in-situ high-temperature X-ray diffraction. Sb₂S₃@xCDs anode delivers high initial coulombic efficiency in lithium ion batteries (85.2%) and sodium ion batteries (82.9%), respectively. C-S bond influenced by oxygen-rich carbon matrix can restrain the conversion of sulfur to sulfite, well confirmed by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations. CDs-induced Sb-O-C bond is proved to effectively regulate the interfacial electronic structure. The application of Sb₂S₃ with marvelous theoretical capacity for alkali metal-ion batteries is seriously limited by its poor electrical conductivity and low initial coulombic efficiency (ICE). In this work, natural stibnite modified by carbon dots (Sb₂S₃@xCDs) is elaborately designed with high ICE. Greatly, chemical processes of local oxidation-partial reduction-deep coupling for stibnite reduction of CDs are clearly demonstrated, confirmed with in situ high-temperature X-ray diffraction. More impressively, the ICE for lithium-ion batteries (LIBs) is enhanced to 85%, through the effect of oxygen-rich carbon matrix on C-S bonds which inhibit the conversion of sulfur to sulfite, well supported by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations. Not than less, it is found that Sb-O-C bonds existed in the interface effectively promote the electronic conductivity and expedite ion transmission by reducing the bandgap and restraining the slip of the dislocation. As a result, the optimal sample delivers a tremendous reversible capacity of 660 mAh g^-1 in LIBs at a high current rate of 5 A g^-1. This work provides a new methodology for enhancing the electrochemical energy storage performance of metal sulfides, especially for improving the ICE.

POS0869 CYTOKINES IN SYSTEMIC SCLEROSIS RELATED INTERSTITIAL LUNG DISEASE AND IDIOPATHIC PULMONARY FIBROSIS

Background

Immune pathways have been implicated in both systemic sclerosis (SSc)-related interstitial lung disease (ILD) and idiopathic pulmonary fibrosis (IPF). Determination of blood cytokine differences in these two disorders need to be elucidated to better understand potential biological processes and common pathogenic pathways.

Objectives

This study compared 87 circulating cytokine levels amongst healthy controls and both SSc-ILD and IPF. There was also exploration of the association between cytokine levels and disease progression based on the annualized rate of decline of forced vital capacity (FVC) and diffusing capacity for carbon monoxide (DLCO).

Methods

Levels of 87 plasma cytokines were measured using commercial panels for consecutive SSc-ILD, IPF, and healthy individuals recruited at a Canadian tertiary-care center. Pulmonary function tests were performed as clinically indicated every 3-12 months. Cytokine levels are compared using the Wilcoxon rank sum test for two samples pairwise. The association between differentially expressed cytokines with both percent predicted annualized FVC and DLCO change was assessed within each disease group using multiple linear models adjusted for age, sex, baseline FVC, and immunosuppressive or anti-fibrotic treatment at sampling. Correction for multiplicity of testing was by Holm’s method.

Results

There were 19 healthy controls, 40 SSc-ILD, and 17 IPF participants with clinical features shown in Table 1. Eotaxin-1 and interleukin 6 (IL-6) were significantly elevated in both SSc-ILD and IPF compared to healthy controls (Figure 1). SSc-ILD had significantly lower soluble epidermal growth factor receptor (sEGFR) and higher levels of both soluble tumor necrosis factor receptor type II (sTNFRII) and soluble vascular endothelial growth factor receptor-1 (sVEGFR1) compared to healthy controls. IPF cases were distinguished from healthy controls by significantly higher monocyte chemoattractant protein-1 (MCP-1) and monokine induced by gamma interferon (MIG, also known as CXCL9) levels. No significant association was found for any of the cytokines with ILD progression based on annualized rates of either FVC or DLCO change.

Table 1.

Baseline patient characteristics stratified by disease groups

Healthy control(n = 19)SSc-ILD(n = 40)IPF(n = 17)Age, year51 ± 1956 ± 1273 ± 7Male, count (%)6 (32)12 (30)12 (71)Disease duration, yearNA6.41 (7.81)1.76 (2.14)Ever smoker, count (%)2 (11)19 (48)14 (82)•4 (82)oker0.4 [0, 1]11 [4, 29]19 [11, 35]Treatment presence, count (%)NA16 (40)7 (41)Baseline FVC %NA80 ± 2285 ± 21Baseline DLCO %NA51 ± 1749 ± 11Annualized FVC % changeNA-1.7 ± 8.2-6.2 ± 13.6Annualized DLCO % changeNA-0.5 ± 6.2-7.8 ± 18.6

The number (%), mean ± standard deviation, and median [interquartile range] are shown. Disease duration is defined as time of ILD first seen on HRCT in IPF and time from first non-Raynaud’s phenomenon in SSc-ILD. Treatment includes presence of ILD therapies: nintedanib, pirfenidone, mycophenolate mofetil, azathioprine, rituximab. FVC = forced vital capacity, DLCO = diffusing capacity for carbon monoxide

Figure 1.

Notched box plots of cytokine differences between disease groups. All cytokine levels are shown on a log scale. Overlap of notches indicates lack of a statistically significant difference in medians in a pairwise comparison. P-values are for SSc-ILD or IPF compared to healthy controls using Wilcoxon rank sum two-sample test corrected for multiple testing using Holms method.

Conclusion

Differences in seven circulating cytokines between healthy controls with both SSc-ILD and IPF show evidence of systemic cytokine activation. All seven cytokines have a role in immune cell extravasation and pro-fibrotic signaling, which provides further evidence of immune pathways involved in pulmonary fibrosis. Further studies will be pursued of longitudinal change of these biomarkers for halting or slowing disease progression and improving response to treatment.

Disclosure of Interests

Boyang Zheng: None declared, Kevin Keen Grant/research support from: Merck Canada Inc, Marvin Fritzler Shareholder of: Abbott Laboratories; Roche Holdings; Abcellera; Moderna, Speakers bureau: For diagnostic company: Werfen, Consultant of: For diagnostic company: Werfen; Aesku, Employee of: Medical Director of Mitogen Diagnostics, Christopher Ryerson Speakers bureau: Boehringer Ingelheim, Hoffmann-La Roche, Consultant of: Boehringer Ingelheim, Hoffmann-La Roche, Veracyte, Astra Zeneca, Grant/research support from: Boehringer Ingelheim, Hoffmann-La Roche, Pearce Wilcox Speakers bureau: Vertex, Valeo, Boehringer, Beth Whalen: None declared, Basak Sahin: None declared, Haiyan Hou Employee of: Mitogen Diagnostics, Penny Latham Employee of: Eve technologies, Mei Feng Zhang Employee of: Mitogen diagnostics, Iris Yao: None declared, James Dunne: None declared

Carbon Dots-Regulated Pomegranate-Like Metal Oxide Composites: From Growth Mechanism to Lithium Storage

Carbon dots (CDs) are considered as excellent structural regulator for metal oxides (MOs) due to their abundant functional groups, superior dispersibility, and ultrasmall size (<10 nm). Herein, a new approach is proposed to construct porous pomegranate-like MOs/CDs composite based on the CDs-induced in situ growth mechanism of ion adsorption-multipoint surface nucleation-crosslinking agglomeration. The proposed methodology is successfully applied to prepare SnO₂ /CDs, Cu₂ O/CDs, and Fe₂ O₃ /CDs composites, respectively, demonstrating its universality to metal oxides. Taking SnO₂ /CDs composite as a case study for anode material in lithium-ion batteries, it exhibits high lithium storage capacity, excellent cycling stability, and a special feature of capacity increase upon cycling. This study provides a new idea for the design of metal oxides materials tuned by CDs and broadens the application of CDs in the field of material synthesis.

Trace tea polyphenols enabling reversible dendrite-free zinc anode

Zinc ion batteries (ZIBs) suffer from severe corrosion effects and dendrite growth on the unstable anode/electrolyte interface (AEI) during the plating/stripping process. Therefore, it is of great significance to build a stable AEI enabling a long lifetime for ZIBs. Herein, trace tea polyphenols (TP) were introduced firstly as additive of zinc acetate electrolyte to protect zinc anode from corrosion invasion and boost uniform zinc deposition, thus achieving reversible dendrite-free zinc anode. In situ synchrotron radiation X-ray imaging was conducted to illustrate the positive role of TP molecules in the uniform plating process of zinc. The stable AEI induced by the specific adsorption of TP molecules reduced hydrogen and oxygen evolution side reactions and increased the coulombic efficiency. The TP additive with an ultralow dosage of 0.028 g L^-1 delivered favorable cycling stability of 720 h at 0.5 mA cm^-2 and 0.5 mAh cm^-2. The Zn-Na₃V₂(PO₄)₃ full cell assembled with the hybrid Zn(Ac)₂-TP electrolyte contributed an energy density of 130 mAh g^-1 at the current density of 0.2C and enhanced cycling stability of 78% retention after 300 cycles. These results will provide new insights into additive engineering for aqueous electrolytes and the fundamental understanding of AEI phenomena for high performance ZIBs.

Bi-doped carbon dots for a stable lithium metal anode

Bi-doped carbon dots (Bi-CDs) with rich polar groups and good compatibility were employed as co-deposition electrolyte additives to homogenize Li⁺ flux for dendrite-free Li deposition. High coulombic efficiency (99.0%) and long-term stability (800 h) with reduced overpotential (∼15 mV) were achieved after introducing Bi-CDs in conventional electrolyte for high-performance Li-S batteries.

Multimodal imaging of hemorrhagic transformation biomarkers in an ischemic stroke model

Hemorrhagic transformation of ischemic stroke has devastating consequences, with high mortality and poor functional outcomes. Animal models of ischemic stroke also demonstrate the potential for hemorrhagic transformation, which complicates biochemical characterization, treatment studies, and hinders poststroke functional outcomes in affected subjects. The incidence of hemorrhagic transformation of ischemic stroke in animal model research is not commonly reported. The postmortem brain of such cases presents a complex milieu of biomarkers due to the presence of healthy cells, regions of varying degrees of ischemia, dead and dying cells, dysregulated metabolites, and blood components (especially reactive Fe species released from lysed erythrocytes). To improve the characterization of hemorrhage biomarkers on an ischemic stroke background, we have employed a combination of histology, X-ray fluorescence imaging (XFI), and Fourier transform infrared (FTIR) spectroscopic imaging to assess 122 photothrombotic (ischemic) stroke brains. Rapid freezing preserves brain biomarkers in situ and minimizes metabolic artifacts due to postmortem ischemia. Analysis revealed that 25% of the photothrombotic models had clear signs of hemorrhagic transformation. The XFI and FTIR metabolites provided a quantitative method to differentiate key metabolic regions in these models. Across all hemorrhage cases, it was possible to consistently differentiate otherwise healthy tissue from other metabolically distinct regions, including the ischemic infarct, the ischemic penumbra, blood vessels, sites of hemorrhage, and a region surrounding the hemorrhage core that contained elevated lipid oxidation. Chemical speciation of deposited Fe demonstrates the presence of heme-Fe and accumulation of ferritin.

Significance of soil moisture on temperature dependence of Hg emission

Soil moisture is a key factor for mercury (Hg) emission from soil. Despite its significance for Hg emissions, the effect of soil moisture on Hg flux and fractions has not been thoroughly investigated. The objective of this study was to elucidate the influences of soil moisture and temperature on Hg fluxes from soils and Hg fractions. A kinetic study was performed to measure Hg emission fluxes of six soil samples under different temperature (T) (15 °C, 20 °C, 25 °C, 30 °C, and 35 °C) and moisture conditions (0%, 10%, and 20% added water). The results showed that the Hg fluxes increased with increases in T and soil moisture. A linear correlation was found between ln (Hg emission flux) and 1/T for the six soil samples at different moisture contents (R² = 0.73-0.99). The range of activation energy (Ea) values was 25.31-57.86 kJ/mol. The Hg fractions in soils of different moisture content were determined by a sequential extraction method. The results demonstrated that soil moisture affected the Hg fractions in soils. The Ea values had different relationships with soil moisture in different soils. There were correlations between Ea and the elemental and mercuric sulfide fractions for air-dried soils. However, for moist soils, Ea was negatively correlated with the water-soluble and acid-soluble fractions. Collectively, the combination of the Hg emission kinetics and Hg fraction measurement of different moist soils indicated that Hg emission was affected by both total Hg concentration and Hg fractions.

Ultra-Low-Dose Pre-Metallation Strategy Served for Commercial Metal-Ion Capacitors

Interfacial bonding strategy has been successfully applied to address the high overpotential issue of sacrificial additives, which reduced the decompositon potential of Na₂C₂O₄ from 4.50 to 3.95 V. Ultra-low-dose technique assisted commercial sodium ion capacitor (AC//HC) could deliver a remarkable energy density of 118.2 Wh kg^-1 as well as excellent cycle stability. In-depth decomposition mechanism of sacrificial compound and the relative influence after pre-metallation were revealed by advanced in situ and ex situ characterization approaches. Sacrificial pre-metallation strategy could compensate for the irreversible consumption of metal ions and reduce the potential of anode, thereby elevating the cycle performance as well as open-circuit voltage for full metal ion capacitors (MICs). However, suffered from massive-dosage abuse, exorbitant decomposition potential, and side effects of decomposition residue, the wide application of sacrificial approach was restricted. Herein, assisted with density functional theory calculations, strongly coupled interface (M-O-C, M = Li/Na/K) and electron donating group have been put forward to regulate the band gap and highest occupied molecular orbital level of metal oxalate (M₂C₂O₄), reducing polarization phenomenon and Gibbs free energy required for decomposition, which eventually decrease the practical decomposition potential from 4.50 to 3.95 V. Remarkably, full sodium ion capacitors constituted of commercial materials (activated carbon//hard carbon) could deliver a prominent energy density of 118.2 Wh kg^-1 as well as excellent cycle stability under an ultra-low dosage pre-sodiation reagent of 15-30 wt% (far less than currently 100 wt%). Noteworthily, decomposition mechanism of sacrificial compound and the relative influence on the system of MICs after pre-metallation were initially revealed by in situ differential electrochemical mass spectrometry, offering in-depth insights for comprehending the function of cathode additives. In addition, this breakthrough has been successfully utilized in high performance lithium/potassium ion capacitors with Li₂C₂O₄/K₂C₂O₄ as pre-metallation reagent, which will convincingly promote the commercialization of MICs.

Electronic Effect and Regiochemistry of Substitution in Pre-sodiation Chemistry

The low oxidation potential of a pre-sodiation cathode additive intrinsically prevents decomposition of the electrolyte. Although the introduction of electron-donating substitution reduces the oxidation potential, the additional molecular weight restricts the output capacity. Herein, as theroretically predicted, the electrochemical oxidation potential of sodium carboxylate is manipulated by the electronic effect and regiochemistry of the functionality, in which the stronger electron-donating substituent, p-π conjugation, and optimized regiochemistry can dramatically lead to the lower potential originated from the elevation of the highest occupied molecular orbital level. Thus, benefiting from the para-NH₂ unit accompanied by a conjugated aromatic architecture, molecularly engineered sodium para-aminobenzoate (PABZ-Na) presents a reduced oxidation plateau of 3.45 V. Triggered by the positive compensation merit, sodium-based electrochemical storage systems manifest excellent electrochemical performances. This breakthrough sheds light into the correlation between the electronic effect of the functional group and the oxidation potential of the organic additive, affording in-depth insights into the fundamental guidance of pre-sodiation chemistry.

Coupling regeneration strategy of lithium-ion electrode materials turned with naphthalenedisulfonic acid

The resource exhaustion and environmental assessment driven by sustainable development make recycle of spent LIBs urgent to be achieved. However, the conventional recycling processes are quite complicated in terms of the tedious steps and secondary contamination. In this paper, hydrosoluble naphthalenedisulfonic acid is firstly proposed to selectively extract valuable metals (Co and Li) for the regeneration of battery materials. Lithium is selectively recovered as lithium enriched solution with a high yield of 99%, while 96.6% cobalt remains in a complex-precipitate benefited from the high acidity and coordination role of naphthalenedisulfonic acid. The leaching of Li fits well with the logarithmic rate law model with an activation energy of 32.42 kJ/mol. Additionally, the regenerated lithium-ion battery active materials (Co₃O₄ anode and LiCoO₂ cathode) prepared from the cobalt complex-precipitate and lithium-enriched solution exhibit excellent discharged-charged performances and rate capability. This feasible strategy assisted by multifunctional naphthalenedisulfonic acid may offer an alternative option for the simultaneous recovery of Li and Co and the rational resource utilization of spent lithium-ion batteries.