Functionalized Metal-Organic Framework as a Biomimetic Heterogeneous Catalyst for Transfer Hydrogenation of Imines

Superior Adsorptive Removal of Anionic Azo Dyes from Aqueous Solutions Using Sulfonic Acid Group-Modified MIL-101@Graphene Oxide Composite

It is critical to remove organic contaminants from wastewater released by the printing and dyeing industry for addressing water pollution issue. Therefore, the fabrication of new adsorbents with excellent removal efficiencies is an urgent task. A composite of MIL-101 partially functionalized with -SO3H (MIL-101-SO3H) and graphene oxide (GO) was prepared by assembling MIL-101-SO3H truncated octahedrons on the GO framework. The synthesized MIL-101-SO3H@GO has a superior adsorption efficiency for anionic azo dyes. The maximum adsorption capacities of MIL-101-SO3H@GO-1 for Congo red, methyl orange, acid orange 7, and acid orange G reached 2711.3, 818.8, 551.2, and 319.8 mg/g, respectively, which are considerably higher than those obtained using unmodified MIL-101. This is because additional interactions that promote azo dye adsorption, such as hydrogen bonding between the dye and the sulfonic acid groups of MIL-101-SO3H or the carboxyl groups of GO, were induced, and agglomerate pores that accommodated the dye were formed in the composite. The ultrahigh removal efficiency of the composite for azo dyes is mainly driven by hydrogen bonding, electrostatic interactions, π-π stacking between the MIL-101-SO3H@GO and dye molecules, synergistic interactions at the interface of GO and MIL-101-SO3H microcrystals, and the pore-filling effect. Understanding these driving forces for dye adsorption can contribute to the development of sustainable and functionally modified metal-organic framework composite adsorbents.

Emerging Methods in Biosensing of Immunoglobin G-A Review

Human antibodies are produced due to the activation of immune system components upon exposure to an external agent or antigen. Human antibody G, or immunoglobin G (IgG), accounts for 75% of total serum antibody content. IgG controls several infections by eradicating disease-causing pathogens from the body through complementary interactions with toxins. Additionally, IgG is an important diagnostic tool for certain pathological conditions, such as autoimmune hepatitis, hepatitis B virus (HBV), chickenpox and MMR (measles, mumps, and rubella), and coronavirus-induced disease 19 (COVID-19). As an important biomarker, IgG has sparked interest in conducting research to produce robust, sensitive, selective, and economical biosensors for its detection. To date, researchers have used different strategies and explored various materials from macro- to nanoscale to be used in IgG biosensing. In this review, emerging biosensors for IgG detection have been reviewed along with their detection limits, especially electrochemical biosensors that, when coupled with nanomaterials, can help to achieve the characteristics of a reliable IgG biosensor. Furthermore, this review can assist scientists in developing strategies for future research not only for IgG biosensors but also for the development of other biosensing systems for diverse targets.

Sustainable and Chemoselective Synthesis of α-Aminonitriles Using Lewis and Brønsted Acid-Functionalized Nanoconfined Spaces

α-Aminonitriles are significant components in the synthesis of biological compounds and complex drugs. Although efficient, procedures for synthesizing α-aminonitriles suffer from high loadings of expensive catalysts, long reaction times, energy-intensive conditions, and expensive, toxic solvents. Herein, we report the use of metal-organic framework Cr-MIL-101-SO3H as a catalyst for the facile synthesis of eight α-aminonitriles, five of which are reported as new molecules. We found that the presence of both open Cr3+ Lewis and -SO3H Brønsted acids in the MIL-101 pores is vital for the one-pot synthesis of α-aminonitriles. The catalytic reaction is conducted under solvent-free conditions at room temperature and a Cr-MIL-101-SO3H loading of 1% by the total mass, which is considered a sustainable synthetic pathway of α-aminonitriles. Additionally, we demonstrated for the first time that Cr-MIL-101-SO3H exhibits a high degree of catalytic chemoselectivity, differing substrates with sterically hindered and electronically withdrawn functional groups. Our study expands the existing family of α-aminonitriles and provides an intelligent strategy for the development of catalysts that can be used to synthesize functional α-aminonitriles with potential in therapeutics and health applications.

Thermodynamics regulated organic hydride/acid pairs as novel organic hydrogen reductants

Organic hydride/acid pairs could realize transformation of N-substituted organic hydrides from hydride reductants to thermodynamics regulated hydrogen reductants on conveniently choosing suitable organic hydrides and acids with various acidities.

Cooperative Interplay of Brønsted Acid and Lewis Acid Sites in MIL-101(Cr) for Cross-Dehydrogenative Coupling of C-H Bonds

Cross-dehydrogenative coupling (CDC) is an effective tool for carbon-carbon bond formation in chemical synthesis. Herein, we report a metal-organic framework (MOF) possessing dual Lewis acidic Cr sites and sulfonic acid sites (MIL-101(Cr)-SO₃H) as an efficient catalytic material for direct cross-coupling of xanthene and different nucleophiles using O₂ as the oxidant. The highly porous structure of MIL-101(Cr)-SO₃H enables the free access of reactants to the catalytic active sites inside MOF pores. Kinetic studies indicated that the Cr sites of MOF accelerate the rate-limiting autoxidation reaction of xanthene, which synergistically work with the sulfonic acid group on MOF ligands in promoting the CDC reactions. Besides, the catalytic system shows excellent functional group compatibility, and a variety of valuable xanthene derivatives were synthesized with satisfactory yields. Furthermore, MIL-101(Cr)-SO₃H can be reused and its catalytic activity and crystal structure remain after six consecutive runs.

Triggering Lewis Acidic Nature through the Variation of Coordination Environment of Cd-Centers in 2D-Coordination Polymers

The rational design and successful synthesis of novel functional metal-organic frameworks relies on careful selection of metals and versatile organic ligands. A newly designed pyrazole-based dicarboxylate ligand, 5-(3,5-dimethyl-1H-pyrazol-1-yl) 1,3-benzenedicarboxylic acid (H₂L), was utilized to obtain two new Cd-based coordination polymers I [Cd(L)(H₂O)]·H₂O and II [Cd(L)] under similar reaction conditions via solvothermal strategy. Single-crystal X-ray data confirmed that compound I exhibits a two-dimensional (2D) skeleton comprising pentagonal bipyramidal Cd-ions and an organic ligand moiety. Compound II has also formed a two-dimensional layer arrangement with the connectivity between trigonal bipyramidal Cd-ions and the organic ligand. Topological analysis revealed that compound I has formed unique 4³.6³ net topology while compound II has displayed a 4⁴.6² sql net topology with 2D frameworks. The Lewis acidic nature of both I and II containing a Cd²⁺ metal center has been correlated with the coordination number through dye adsorption-desorption and catalysis studies. The selective adsorption of anionic dye and the extent of adsorption are interrelated with the Cd-ion geometry. For the first time, the role of coordinated water molecule has been analyzed through heterogeneous catalysis reaction (i.e., cyanosilylation) with Cd-based 2D-coordination polymers (CPs). The plausible mechanisms have been proposed to explain the subsequent role of coordination number and environment in CPs.

Iron and chromium MOFs as sustainable catalysts for transfer hydrogenation of carbonyl compounds and biomass conversions

Fe and Cr based MOFs (MIL-88B) act as efficient and reusable catalysts for transfer hydrogenation of carbonyl compounds including bio-derived substrates.

Modulation of the driving forces for adsorption on MIL-101 analogues by decoration with sulfonic acid functional groups: superior selective adsorption of hazardous anionic dyes

MIL-101-SO₃H analogues functionalized with –SO₃H groups exhibited superior CR, MO and AC adsorption capacities because of their distinct adsorption mechanisms.

Palladium NPs supported on sulfonic acid functionalized metal–organic frameworks as catalysts for biomass cascade reactions

Pd nanoparticles supported on –SO₃H functionalized MIL-101 matrices were designed and synthesized as hydrogenation/esterification multifunctional catalysts for biomass cascade reactions.

Mechanistic insight into the catalytic hydrogenation of nonactivated aldehydes with a Hantzsch ester in the presence of a series of organoboranes: NMR and DFT studies

Mechanistic studies on the organoborane-catalyzed transfer hydrogenation of nonactivated aldehydes with a Hantzsch ester as a synthetic NADPH analogue were performed by NMR experiments and DFT calculations.

Molecular design of chiral zirconium metal–organic frameworks for asymmetric transfer hydrogenation of imines

Two chiral zirconium metal–organic frameworks are designed with high enantioselectivity for asymmetric transfer hydrogenation of imines.

Rational Design of Catalytic Centers in Crystalline Frameworks

Crystalline frameworks including primarily metal organic frameworks (MOF) and covalent organic frameworks (COF) have received much attention in the field of heterogeneous catalysts recently. Beyond providing large surface area and spatial confinement, these crystalline frameworks can be designed to either directly act as or influence the catalytic sites at molecular level. This approach offers a unique advantage to gain deeper insights of structure-activity correlations in solid materials, leading to new guiding principles for rational design of advanced solid catalysts for potential important applications related to energy and fine chemical synthesis. In this review, recent key progress achieved in designing MOF- and COF-based molecular solid catalysts and the mechanistic understanding of the catalytic centers and associated reaction pathways are summarized. The state-of-the-art rational design of MOF- and COF-based solid catalysts in this review is grouped into seven different areas: (i) metalated linkers, (ii) metalated moieties anchored on linkers, (iii) organic moieties anchored on linkers, (iv) encapsulated single sites in pores, and (v) metal-mode-based active sites in MOFs. Along with this, some attention is paid to theoretical studies about the reaction mechanisms. Finally, technical challenges and possible solutions in applying these catalysts for practical applications are also presented.

Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis

Analytical chemistry is now developing mainly in two areas: automation and the creation of complexes that allow, on the one hand, for simultaneously analyzing a large number of samples without the participation of an operator, and on the other, the development of portable miniature devices for personalized medicine and the monitoring of a human habitat. The sensor devices, the great majority of which are biosensors and chemical sensors, perform the role of the latter. That last line is considered in the proposed review. Attention is paid to transducers, receptors, techniques of immobilization of the receptor layer on the transducer surface, processes of signal generation and detection, and methods for increasing sensitivity and accuracy. The features of sensors based on synthetic receptors and additional components (aptamers, molecular imprinted polymers, biomimetics) are discussed. Examples of bio- and chemical sensors' application are given. Miniaturization paths, new power supply means, and wearable and printed sensors are described. Progress in this area opens a revolutionary era in the development of methods of on-site and in-situ monitoring, that is, paving the way from the "test-tube to the smartphone".

A supramolecular approach to construct a hydrolase mimic with photo-switchable catalytic activity

A supramolecular artificial hydrolase with photo-switchable catalytic activity was developed by the introduction of a photo-responsive group in peptide, which leads to the assembly/disassembly of the peptide nanofibers.

Stable metal–organic frameworks as a host platform for catalysis and biomimetics

Recent years have witnessed the exploration and synthesis of an increasing number of metal–organic frameworks (MOFs). The utilization of stable MOFs as a platform for catalysis and biomimetics is discussed.