Graphene Nanoprobes for Real-Time Monitoring of Isothermal Nucleic Acid Amplification

Aptamer-based DNA-catalyzed amplification strategy for sensitive fluorescence resonance energy transfer detection of Acinetobacter baumannii

Acinetobacter baumannii (A. baumannii) is a common pathogen that causes hospital-acquired infections and is resistant to a wide variety of antibiotics. Consequently, the rapid and highly sensitive detection of A. baumannii is required during the early stages of infection. Therefore, we developed a DNA-catalyzed amplification mechanism based on aptamers, combined with a novel fluorescence resonance energy transfer (FRET) method based on graphene oxide (GO), for the detection of A. baumannii. In the presence of A. baumannii, an aptamer bound to A. baumannii, releasing the template strand, which triggered an entropy-driven catalysis (EDC) reaction. One EDC product was then used as the catalyst for catalytic hairpin assembly (CHA) on a GO nanosheet. Finally, the GO released a huge amount of FAM-labeled DNA duplices, which could be detected with FRET. This strategy circumvented the extraction of nucleic acids and was easy to execute, with a detection time of ≤1.5 h. The detection of A. baumannii with this method ranges from 5 cfu/mL to 1 × 10⁵ cfu/mL, with a detection limit of 1.1 cfu/mL. The method was sufficiently sensitive and specific to detect A. baumannii rapidly in cerebrospinal fluid. In summary, our strategy provides a new option for the early detection and point-of-care testing (POCT) of A. baumannii infections, allowing their earlier and more precise treatment.

The aggregation of multiple miR-29a cancer biomarkers induced by graphene quantum dots: Molecular dynamics simulations

MicroRNAs (miRNAs) are small non-coding RNAs that play a role in regulating gene expression. MiRNAs are focused on as potential cancer biomarkers due to their involvement in the cancer development. New effective techniques for extracting miRNA from a biological matrix is important. Recently, graphene quantum dots (GQDs) have been used to detect DNA/RNA in many sensor platforms, but the application in miRNA extraction remains limited. To extract miRNAs, the miRNA adsorption and desorption on GQD are the key. Thus, in this work, the adsorption mechanism of excess miRNA on GQD in solution is revealed using Molecular dynamics simulations. The miRNA assemblies on one and two GQDs were studied to explore the possibility of using GQD for miRNA extraction. The folded miR-29a molecule, one of key cancer biomarkers, is used as an miRNA model. Three systems with one (6miR) and two GQDs (with parallel (6miR_2GP) and sandwich (6miR_2GS) organisations) in six-miR-29a solution were set. The data show excess miR-29a can reduce the miR-29a-GQD binding efficiency. The opening of intrabase pairing of GQD-absorbed miR-29a facilitates the interbase coupling resulting in the self-aggregation of miR-29a. The GQD organisation also affects the miR-29a adsorption ability. The additional GQDs result in the tighter miR-29a adsorption which can retard the miR-29a desorption. The proper GQD concentration is thus important to successfully collect all miR-29a and accommodate the easy miR-29a dissociation. Our results can be useful for a design of DNA probe and choosing decent nanosized GRA concentration for experimental setups.

Application of Nanomaterials in Isothermal Nucleic Acid Amplification

Because of high sensitivity and specificity, isothermal nucleic acid amplification are widely applied in many fields. To facilitate and improve their performance, various nanomaterials, like nanoparticles, nanowires, nanosheets, nanotubes, and nanoporous films are introduced in isothermal nucleic acid amplification. However, the specific application, roles, and prospect of nanomaterials in isothermal nucleic acid amplification have not been comprehensively reviewed. Here, the application of different nanomaterials (0D, 1D, 2D, and 3D) in isothermal nucleic acid amplification is comprehensively discussed and recent progress in the field is summarized. The nanomaterials are mainly used for reaction enhancer, signal generation/amplification, or surface loading carriers. In addition, 3D nanomaterials can be also functioned as isolated chambers for digital nucleic acid amplification and the tools for DNA sequencing of amplified products. Challenges and future recommendations are also proposed to be better used for recent covid-19 detection, point-of-care diagnostic, food safety, and other fields.

Modeling the Adsorption of the miR-29a Cancer Biomarker on a Graphene Quantum Dot

MicroRNAs (miRNAs) are small noncoding RNA molecules associated with the regulation of gene expression in organisms. MiRNAs are focused on as potential cancer biomarkers due to their involvement in cancer development. New potential techniques for miRNA detection are rapidly developed, while there is a lack of effective extraction approaches, especially for miRNAs. Recently, graphene quantum dots (GQDs) have been involved in many disease biosensor platforms including miRNA detection, but no application in miRNA extraction is studied. To extract miRNAs, miRNA adsorption and desorption on GQDs are the key. Thus, in this work, the adsorption mechanism of miRNA on GQDs in solution is revealed using molecular dynamics simulations. The aim is to explore the possibility of using GQDs for miRNA extraction. The folded miR-29a molecule, one of the key cancer biomarkers, is used as a miRNA model. Two systems with one (1miR) and four (4miR) chains of miR-29a were set. MiR-29a molecules in all systems are simultaneously adsorbed on the GQD surface. Our finding highlights the ability of the GQD in collecting miRNAs in solution. In 1miR, the whole miR-29a chain sits on the GQD face, whereas all miR-29a molecules in 4miR show the "clamping" conformation. No "lying flat" orientation of miR-29a is observed due to the existence of the preserved hairpin region. Interestingly, the 5' end shows tighter binding than the 3' terminus. A design of complementary DNA with the recognition segment involving the sequences close to the 3' end can promote effective miR-29a desorption.

Functionalized Co2FeAl Nanoparticles for Detection of SARS CoV-2 Based on Reverse Transcriptase Loop-Mediated Isothermal Amplification

Loop-mediated isothermal amplification (LAMP) is a sensitive, efficient, and rapid nucleic acid amplification technique resulting in a large number of amplicons; however, it suffers from a high incidence of false positives due to carry-over and aerosol. Herein, we report a 10 min nano-capture system that is used in conjunction with a modified reverse transcriptase-LAMP (RT-LAMP) assay for the accurate detection of SARS CoV-2 virus. The nano-capture system employs in-house-designed probe-functionalized magnetic nanoparticles Co2FeAl (cobalt-based Heusler alloy) for efficient capture of contaminating amplicons from the reaction mixture preceding RT-LAMP. The nano-cleaned RT-LAMP assay along with engineered primers successfully detected the presence of 10 copies of SARS CoV-2 virus while completely eliminating the incidence of false positives. The presented contaminant-capture method has been compared with other approaches for elimination of contaminants and was found to be more effective. The insight brought in this work is the design of a rapid nano-capture system that hybridizes with contaminating amplicons (carry-over) with high specificity to enable easy removal from the assay for elimination of false positives. The method has been proven to be successful for RT-LAMP assays in the rapid and highly specific detection of SARS CoV-2, which is currently a major challenge for global health. To the best of our knowledge, this is the first work involving a nano-based cleaning strategy for reliable and rapid diagnosis using isothermal amplification approaches.

Construction of a simple and intelligent DNA-based computing system for multiplexing logic operations

Over the past few decades, DNA-based computing technology has become a rapidly developing technology and shown remarkable capabilities in handling complex computational problems. However, most of the logical operations that DNA computer can achieve are still very basic or using large-scale operations to realize complex functions, especially in mathematics. Graphene oxide (GO) is an ideal nanomaterial for biological computing, which has been used in our previous work to perform basic logic operations. Here, we utilize GO to implement far more complex and large-scale logical computing. For the first time, in this work, we utilize the unique interaction between GO and a variety of classified single-stranded DNAs as the reaction platform, by segmenting and encoding the DNA sequences, and programming the interactions between inputs and between the inputs and reaction platform, two relative large-scale logic operations, 6-bit square-root and 9-bit cube-root logical circuits are realized. This study provides a simple but efficient method for advanced and large-scale logical mathematic operations in biotechnology, opening a new horizon for building biocomputer-based innovative functional devices.

Nanoscale rearrangement of APP organization as a therapeutic target for Alzheimer's disease

Despite the importance of canonical processing of Amyloid Precursor Protein at synapses as a major risk factor for the development of Alzheimer's Disease, there have been very little progress on designing effective therapeutic paradigms targeting it. Majority of the drugs developed or under clinical evaluation focus on the clearance of the detrimental proteoforms or secretases involved in the proteolysis of APP. The lack of interventions targeting APP is in part due to the lack of information in understanding the fine organization of APP and the chemical map of its association with subsynaptic functional zones of the synapse. The recent advances to evaluate the molecular organization of synapses allows us to readdress the need for designing tools to target the full-length APP. Here, we describe the potential role of nanoscale segregation of synaptic APP and how this organization influences the local processing of APP in different subsynaptic compartments opening avenues for early intervention strategies. We envision the need to design smart molecules which would interfere with the real-time chemical composition and physical properties of APP at nanoscale. These tools could alter the balance of proteoforms generated and/or enhance the proteolysis by selective secretases to reduce the toxic products formed through amyloidogenic pathway. We believe that such an approach would be rational to treat or delay the onset of neurodegenerative diseases like AD.

Toehold-regulated competitive assembly to accelerate the kinetics of graphene oxide-based biosensors

With effective adsorption and quenching efficiency, graphene oxide (GO) can be utilized for sensing biomolecules such as nucleic acids and proteins. In these assays, the fluorophore-labeled nucleic acid (reporter) is usually adsorbed by GO first, followed by adding the target molecules to bind the reporter, thus restoring the fluorescence signal. However, the kinetics of fluorescence recovery is usually very slow because the target is probably adsorbed by GO and compromises the binding of the target and the reporter. Herein, we proposed a toehold-regulated strand displacement strategy to accelerate the kinetics of GO-based biosensing. In this strategy, the toehold of the duplex mediated a competitive assembly with the aim of eliminating the adsorption of the target by GO, facilitating the binding of the target and the reporter. While the duplex with the toehold of the target-blocker DNA or reporter-blocker DNA was formed, the rigid structure of the duplex weakened the adsorption of the target by GO and enhanced the recognition of the target by the reporter. This strategy achieved up to 2.6-fold enhancement in fluorescence signal restoration for nucleic acid detection, while there was 3.2-fold enhancement in fluorescence signal restoration for thrombin detection. It has also been demonstrated that this strategy can be used for the determination of DNA and thrombin in diluted serum with excellent specificity.

Au nanoparticles deposited on ultrathin two-dimensional covalent organic framework nanosheets for in vitro and intracellular sensing

A novel composite nanomaterial is prepared by growing small Au nanoparticles on two-dimensional covalent organic framework nanosheets (Au NPs/COF NSs). The synthesized hybrid nanosheets are used as a new platform for multiplexed detection of hepatitis A virus DNA (HAV) and hepatitis B virus DNA (HBV). Additionally, this sensing platform based on Au NPs/COF NSs can be used as a candidate for monitoring the distribution of potassium ions (K⁺) and the intracellular K⁺ level in living cells. Accordingly, the sensing systems based on hybrid Au NPs/COF NSs have shown great potential for the investigation of biomolecules and related biological applications.

DNA framework-engineered electrochemical biosensors

Self-assembled DNA nanostructures have shown remarkable potential in the engineering of biosensing interfaces, which can improve the performance of various biosensors. In particular, by exploiting the structural rigidity and programmability of the framework nucleic acids with high precision, molecular recognition on the electrochemical biosensing interface has been significantly enhanced, leading to the development of highly sensitive and specific biosensors for nucleic acids, small molecules, proteins, and cells. In this review, we summarize recent advances in DNA framework-engineered biosensing interfaces and the application of corresponding electrochemical biosensors.

Physical and chemical template-blocking strategies in the exponential amplification reaction of circulating microRNAs

The detection of circulating miRNA through isothermal amplification wields many attractive advantages over traditional methods, such as reverse transcription RT-qPCR. However, it is challenging to control the background signal produced in the absence of target, which severely hampers applications of such methods for detecting low abundance targets in complex biological samples. In the present work, we employed both the cobalt oxyhydroxide (CoOOH) nanoflakes and the chemical modification of hexanediol to block non-specific template elongation in exponential amplification reaction (EXPAR). Adsorption by the CoOOH nanoflakes and the hexanediol modification at the 3' end effectively prevented no-target polymerization on the template itself and thus greatly improved the performance of EXPAR, detecting as low as 10 aM of several miRNA targets, including miR-16, miR-21, and miR-122, with the fluorescent DNA staining dye of SYBR Gold™. Little to no cross-reactivity was observed from the interfering strands present in 10-fold excess. Besides contributing to background reduction, the CoOOH nanoflakes strongly adsorbed nucleic acids and isolated them from a complex sample matrix, thus permitting successful detection of the target miRNA in the serum. We expect that simple but sensitive template-blocking EXPAR could be a valuable tool to help with the discovery and validation of miRNA markers in biospecimens. Graphical abstract.

Pathogenic Bacteria Detection Using RNA-Based Loop-Mediated Isothermal-Amplification-Assisted Nucleic Acid Amplification via Droplet Microfluidics

Nucleic acid amplifications, such as polymerase chain reaction (PCR), are very beneficial for diagnostic applications, especially in the context of bacterial or viral outbreaks due to their high specificity and sensitivity. However, the need for bulky instrumentation and complicated protocols makes these methods expensive and slow, particularly for low numbers of RNA or DNA templates. In addition, implementing conventional nucleic acid amplification in a high-throughput manner is both reagent- and time-consuming. We bring droplet-based microfluidics and loop-mediated isothermal amplification (LAMP) together in an optimized operational condition to provide a sensitive biosensor for amplifying extracted RNA templates for the detection of Salmonella typhimurium (targeting the invA gene). By simultaneously performing ∼10⁶ LAMP-assisted amplification reactions in picoliter-sized droplets and applying a new mathematical model for the number of droplets necessary to screen for the first positive droplet, we study the detection limit of our platform with pure culture and real samples (bacterial contaminated milk samples). Our LAMP-assisted droplet-based microfluidic technique was simple in operation, sensitive, specific, and rapid for the detection of pathogenic bacteria Salmonella typhimurium in comparison with well-established conventional methods. More importantly, the high-throughput nature of this technique makes it suitable for many applications in biological assays.

Label-Free and Enzyme-Free Colorimetric Detection of Pb2+ Based on RNA Cleavage and Annealing-Accelerated Hybridization Chain Reaction

A label-free and enzyme-free colorimetric sensor for rapid detection of Pb²⁺ is reported, which is based on the strategy of DNAzyme-mediated RNA cleavage combined with an annealing-accelerated DNA hybridization chain reaction (HCR). As a trigger DNA, the substrate strand (S_TM) of DNAzyme can initiate HCR effectively. However, when it is cleaved by DNAzyme in the presence of Pb²⁺, the separation of DNA functional domains leads to a serious decrease in HCR efficiency. As a result, the difference in Pb²⁺ concentration converts into the difference of DNA assembly, which eventually leads to the color change of colloidal gold nanoparticles (AuNPs). In this work, a DNA strand (cGR5) completely complementary to the catalytic strand (GR5) of DNAzyme is used to improve the dissociation of S_TM to enhance the HCR efficiency. In addition, the simple operation of DNA annealing is first used to accelerate the HCR process, enabling the Pb²⁺ detection to be completed in about 30 min. As advantages of high sensitivity, good selectivity, strong anti-interference ability, and good practical performance are achieved, it is anticipated that the cheap and simple colorimetric sensor will be helpful for on-site detection of environmental and food samples.

Engineering Nanozymes Using DNA for Catalytic Regulation

DNA treatment of metal nanoparticles provides a potent tool for tuning their native properties and constructing advanced materials. However, there have been limited studies on interactions between DNA and nanomaterial-based artificial enzymes (nanozymes) to influence their intrinsic peroxidase-like properties. Here, we present the utilization of DNA as a capping ligand to engineer various bio-nanointerfaces for high-precise and adjustable regulation of catalytic behaviors of nanozymes toward the oxidation of substrates. The treatment of stiff double-stranded DNA only induced a negligible enhancement of the catalytic activity of nanozymes, and both coil-like single-stranded DNA and hairpin DNA-capped nanoparticles produced a medium signal increase. Interestingly, hybridization chain reaction (HCR) product-treated nanoparticles showed the highest peroxidase-like activities among four DNA structures. Furthermore, significant parameters that influence HCR process and the modulation of catalysis, such as the concentration of the hairpin DNA, the ionic strength, and the amount of nanozyme, were also systematically investigated. On the basis of HCR amplification and iron oxide (Fe₃O₄) nanoparticles, we develop a simple, fast, label-free, and sensitive colorimetric strategy for sensing of a Yersinia pestis-relevant DNA sequence with a detection limit as low as 100 pM as well as single nucleotide polymorphism discrimination. These results highlight DNA engineering as a facile strategy to regulate the catalytic activities of nanozymes and understand the interactions between metallic nanoparticles and nucleic acids for biosensing applications.

A Facile, Label-Free, and Universal Biosensor Platform Based on Target-Induced Graphene Oxide Constrained DNA Dissociation Coupling with Improved Strand Displacement Amplification

In this work, we report a low-cost and easy operation biosensor platform capable of detection of various analytes with high sensitivity and good selectivity. By ingeniously assigning the specific aptamer into a primer-template integrated DNA template, and using monolayer graphene oxide as a reversible and nonspecific inhibitor, the simple biosensor platform is set up. Without a target, the DNA template is constrained by the graphene oxide sheet and results in low signal. In the presence of a target, the constrained DNA template is released from the graphene oxide surface via a target-induced aptamer conformational change, and further amplified through the improved strand displacement amplification reaction. Therefore, the target detection is simply converted to DNA detection, and a correlation between target concentration and fluorescence signal can be set up. As a result, dozens-fold signal enhancement, high sensitivity, good selectivity, and potential practicability are achieved in target detection. More importantly, the proposed biosensor platform is versatile, meaning that it can greatly facilitate the detection of a variety of analytes. Due to the low cost and easy availability of sensing materials, and the elimination of tedious detection operations, we believe that this simple and universal biosensor platform can find wide applications in biological assay and environment monitoring.

Versatile Types of DNA-Based Nanobiosensors for Specific Detection of Cancer Biomarker FEN1 in Living Cells and Cell-Free Systems

Flap structure-specific endonuclease 1 (FEN1) is overexpressed in various types of human cancer cells and has been recognized as a promising biomarker for cancer diagnosis in the recent years. In order to specifically detect the abundance and activity of this cancer-overexpressed enzyme, different types of DNA-based nanodevices were created during our investigations. It is shown in our studies that these newly designed biosensors are highly sensitive and specific for FEN1 in living cells as well as in cell-free systems. It is expected that these nanoprobes could be useful for monitoring FEN1 activity in human cancer cells, and also for cell-based screening of FEN1 inhibitors as new anticancer drugs.

Graphene-based nanomaterials in biosystems

Graphene-based nanomaterials have emerged as a novel type of materials with exceptional physicochemical properties and numerous applications in various areas. In this review, we summarize recent advances in studying interactions between graphene and biosystems. We first provide a brief introduction on graphene and its derivatives, and then discuss on the toxicology and biocompatibility of graphene, including the extracellular interactions between graphene and biomacromolecules, cellular studies of graphene, and in vivo toxicological effects. Next, we focus on various graphene-based practical applications in antibacterial materials, wound addressing, drug delivery, and water purification. We finally present perspectives on challenges and future developments in these exciting fields.

Electro-Grafted Electrode with Graphene-Oxide-Like DNA Affinity for Ratiometric Homogeneous Electrochemical Biosensing of MicroRNA

This work demonstrated for the first time a simple and rapid approach to endow the electrode with the excellent discrimination ability over single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) through the robust electrochemical grafting of in situ generated 1-naphthalenesulfonate (NS^-) diazonium salt onto the surface of indium tin oxide (ITO) electrode. On the basis of understanding the influence of sequence and length on the binding affinity of ssDNA and dsDNA toward NS^- grafted ITO (NS^--ITO) electrode, these interesting findings were successfully employed to rationally develop a ratiometric homogeneous electrochemical biosensing platform for microRNA based on the affinity-mediated signal transduction. The achievement of ultrasensitive detection of microRNA lies in a compatibly designed T7 exonuclease-assisted isothermal amplification strategy, in which the presence of target microRNA initiated the continual and opposite affinity inversion of two rationally engineered electrochemical signal reporters, methylene blue (MB) labeled hairpin reporter and ferrocene (Fc) labeled dsDNA reporter, toward NS^--ITO electrode, thereby providing the ratiometric transduction and amplification of the homogeneous electrochemical output signal. By measuring the distinct variation in the peak current intensity ratios of Fc and MB tags, this ratiometric homogeneous electrochemical microRNA biosensing platform showed a detection limit of 25 aM, which is much lower than that of the reported homogeneous electrochemical biosensors. Therefore, we envision that the proposed approach will find useful applications in disease molecular diagnoses and biomedicine.

Extraction of microRNAs from biological matrices with titanium dioxide nanofibers

MicroRNAs (miRNAs) are small RNAs that bind to mRNA targets and regulate their translation. A functional study of miRNAs and exploration of their utility as disease markers require miRNA extraction from biological samples, which contain large amounts of interfering compounds for downstream RNA identification and quantification. The most common extraction methods employ silica columns or the TRIzol reagent but give out low recovery for small RNAs probably due to their short strand lengths. Herein, we fabricated the titanium dioxide nanofibers using electrospinning to facilitate miRNA extraction and developed the optimal buffer conditions to improve miRNA recovery from biological matrices of cell lysate and serum. We found that our TiO₂ fibers could obtain a recovery of 18.0 ± 3.6% for miRNA fibers while carrying out the extraction in the more complex medium of cell lysate, much higher than the 0.02 ± 0.0001% recovery from the commercial kit. The much improved extraction of miRNAs from our fibers could be originated from the strong coordination between TiO₂ and RNA's phosphate backbone. In addition, the binding, washing, and elution buffers judiciously developed in the present study can achieve selective extraction of small RNA shorter than 500 nucleotides in length. Our results demonstrate that TiO₂ nanofibers can work as a valuable tool for extraction of miRNAs from biological samples with high recovery. Graphical abstract Schematic for extraction of small RNAs using TiO₂ nanofibers.