Layer-by-Layer-Assembled Laccase Enzyme on Stimuli-Responsive Membranes for Chloro-Organics Degradation

Laccase based per- and polyfluoroalkyl substances degradation: Status and future perspectives

Per- and polyfluoroalkyl substances (PFAS) with stable carbon-fluorine bonds are used in a wide range of industrial and commercial applications. Due to their extreme environmental persistence, PFAS have the potential to bioaccumulate, cause adverse effects, and present challenges regarding remediation. Recently, microbial and enzymatic reactions for sustainable degradation of PFAS have gained attention from researchers, although biological decomposition of PFAS remains challenging. Surprisingly, laccases, the multi-copper oxidases produced by various organisms, showed potential for PFAS degradation. Mediators play key roles in initiating laccase induced PFAS degradation and defluorination reactions. The laccase-catalyzed PFAS degradation reactions are relatively slower than normal biocatalytic reactions and the low activity of native laccases constrains their capacity to complete defluorination. With their low redox potential and narrow substrate scope, an innovative remediation strategy must be taken to accelerate this reaction. In this review we have summarized the status, challenges, and future perspectives of enzymatic PFAS degradation. The knowledge of laccase-based defluorination and the molecular basis of the reaction mechanisms overviewed in this study could inform future applications of laccases for sustainable PFAS remediation.

Advances in immobilized microbial technology and its application to wastewater treatment: A review

The use of immobilized microbial technology in wastewater treatment has drawn extensive attention due to its advantages of high colony density, rapid reaction speed, and good stability. Immobilization carriers are the core of immobilization technology. This review summarizes the types of immobilization carriers and their advantages and disadvantages, focusing on the potential for utilizing novel immobilization carriers (composite carriers, nanomaterials, metal-organic frameworks (MOFs), and biochar materials) in wastewater applications. The basic principles and technical advantages and disadvantages of novel immobilization methods (layer-by-layer self-assembly (LBL) and electrostatic spinning) are then summarized. Additionally, the research progress and application characteristics of immobilized anaerobic ammonia oxidizing (Anammox) and aerobic denitrifying (AD) bacteria for enhanced wastewater nitrogen removal are discussed. Finally, the current challenges of immobilized microbial technology are discussed, and its future development trends are summarized and prospected. This review provides guidance and theoretical support for the practical engineering application of immobilized microbial technology.

Membrane Functionalization Approaches toward Per- and Polyfluoroalkyl Substances and Selected Metal Ion Separations

Adsorption and ion exchange technologies are two of the most widely used approaches to separate pollutants from water; however, their intrinsic diffusion limitations continue to be a challenge. Pore functionalized membranes are a promising technology that can help overcome these challenges, but the extents of their competitive benefits and broad applicability have not been systematically evaluated. Herein, three types of adsorptive/ion exchange (IX) polymers containing strong/weak acid, strong base, and iron-chitosan complex groups were synthesized in the pores and partially on the surface of microfiltration (MF) membranes and tested for the removal of organic and inorganic cations and anions from water, including arsenic, per- and polyfluoroalkyl substances (PFAS), and calcium (hardness). When directly compared with beads (0.5-6 mm) and crushed resins (0.05 mm), adsorptive/IX pore-functionalized membranes demonstrated an increased relative sorption capacity, up to 2 orders of magnitude faster kinetics and the ability to regenerate up to 70-100% of their capacity while concentrating the initial solution concentration up to 12 times. The simple and versatile synthesis approach used to functionalize membranes, notably independent of the polymer type of the MF membrane, utilized pores throughout the entire cross section of the membrane to immobilize the polymers that contain the functional groups. Utilizing the pore volume of commercial membranes (6-112 mL/m2), the scientific weight capacity of the polymer (3.1-11.5 mequiv/g), and the synthesis conditions (e.g., monomer concentration), the theoretical adsorption/IX capacities per area of the membranes were calculated to be as high as 550 mequiv/m2, substantially higher than the 175 mequiv/m2 value needed to compete with commercially available IX resins. This work therefore shows that pore functionalized membranes are a promising path to tackle water contamination challenges, lowering separation diffusion limitations.

Construction of Macroporous β-Glucosidase@MOFs by a Metal Competitive Coordination and Oxidation Strategy for Efficient Cellulose Conversion at 120 °C

Metal-organic frameworks (MOFs) have become promising accommodation for enzyme immobilization in recent years. However, the microporous nature of MOFs affects the accessibility of large molecules, resulting in a significant decline in biocatalysis efficiency. Herein, a novel strategy is reported to construct macroporous MOFs by metal competitive coordination and oxidation with induced defect structure using a transition metal (Fe²⁺) as a functional site. The feasibility of in situ encapsulating β-glucosidase (β-G) within the developed macroporous MOFs endows an enzyme complex (β-G@MOF-Fe) with remarkably enhanced synergistic catalysis ability. The 24 h hydrolysis rate of β-G@MOF-Fe (with respect to cellobiose) is as high as approximately 99.8%, almost 32.2 times that of free β-G (3.1%). Especially, the macromolecular cellulose conversion rate of β-G@MOF-Fe reached 90% at 64 h, while that of β-G@MOFs (most micropores) was only 50%. This improvement resulting from the expansion of pores (significantly increased at 50-100 nm) can provide enough space for the hosted biomacromolecules and accelerate the diffusion rate of reactants. Furthermore, unexpectedly, the constructed β-G@MOF-Fe showed a superior heat resistance of up to 120 °C, attributing to the new strong coordination bond (Fe²⁺-N) formation through the metal competitive coordination. Therefore, this study offers new insights to solve the problem of the high-temperature macromolecular substrate encountered in the actual reaction.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Boosting Hydrolysis of Cellulose at High Temperature by β-Glucosidase Induced Metal-Organic Framework In-Situ Co-Precipitation Encapsulation

Due to the poor enzyme thermal stability, the efficient conversion of high crystallinity cellulose into glucose in aqueous phase over 50 °C is challenging. Herein, an enzyme-induced MOFs encapsulation of β-glucosidase (β-G) strategy was proposed for the first time. By using various methods, including SEM, XRD, XPS, NMR, FTIR and BET, the successful preparation of a porous channel-type flower-like enzyme complex (β-G@MOFs) was confirmed. The prepared enzyme complex (β-G@MOFs) materials showed improved thermal stability (from 50 °C to 100 °C in the aqueous phase) and excellent resistance to ionic liquids (the reaction temperature was as high as 110 °C) compared to the free enzyme (β-G). Not only the catalytic hydrolysis of cellulose by single enzyme (β-G) in ionic liquid was realized, but also the high-temperature continuous reaction performance of the enzyme was significantly improved. Benefiting from the significantly improved heat resistance, the β-G@MOFs exhibited 32.1 times and 34.2 times higher enzymatic hydrolysis rate compared to β-G for cellobiose and cellulose substrates, respectively. Besides, the catalytic activity of β-G@MOFs was retained up to 86 % after five cycles at 110 °C. This was remarkable because the fixation of the enzyme by the MOFs ensured that the folded structure of the enzyme would not expand at high temperatures, allowing the native conformation of the encapsulated protein well-maintained. Furthermore, we believe that this structural stability was caused by the confinement of flower-like porous MOFs.

Laccase immobilization in polyelectrolyte multilayer membranes for 17α-ethynylestradiol removal: Biocatalytic approach for pharmaceuticals degradation

Enzymatic membrane reactors equipped with multifunctional biocatalytic membranes are promising and sustainable alternatives for removal of micropollutants, including steroid estrogens, under mild conditions. Thus, in this study an effort was made to produce novel multifunctional biocatalytic polyelectrolyte multilayer membranes via polyelectrolyte layer-by-layer assembly with laccase enzyme immobilized between or into polyelectrolyte layers. In this study, multifunctional biocatalytic membranes are considered as systems composed of commercially available filtration membrane modified by polyelectrolytes and immobilized enzymes, which are produced for complex treatment of water pollutants. The multifunctionality of the proposed systems is related to the fact that these membranes are capable of micropollutants removal via simultaneous catalytic conversion, membrane adsorption and membrane rejection making remediation process more complex, however, also more efficient. Briefly, cationic poly-l-lysine and polyethylenimine as well as anionic poly(sodium 4-styrenesulfonate) polyelectrolytes were deposited onto NP010 nanofiltration and UFX5 ultrafiltration membranes to produce systems for removal of 17α-ethynylestradiol. Images from scanning electron microscopy confirm effective enzyme deposition, whereas results of zeta potential measurements indicate introduction of positive charge onto the membranes. Based on preliminary results, four membranes with over 70%, activity retention produced using polyethylenimine in internal and entrapped mode, were selected for degradation tests. Systems based on UFX5 membrane allowed over 60% 17α-ethynylestradiol removal within 100 min, whereas NP010-based systems removed over 75% of estrogen within 150 min. Further, around 80% removal of 17α-ethynylestradiol was possible from the solutions at concentration up to 0.1 mg/L at pH ranging from 4 to 6 and at the pressure up to 3 bar, indicating high activity of the immobilized laccase over wide range of process conditions. Produced systems exhibited also great long-term stability followed by limited enzyme elution from the membrane. Finally, removal of over 70% and 60% of 17α-ethynylestradiol, respectively by NP010 and UFX5 systems after 8 cycles of repeated use indicate high reusability potential of the systems and suggest their practical application in removal of micropollutants, including estrogens.

Recent advance in solid state nanopores modification and characterization

Nanopore, due to its advantages of modifiable, controllability and sensitivity, has made a splash in recent years in the fields of biomolecular sequencing, small molecule detection, salt differential power generation, and biomimetic ion channels, etc. In these applications, the role of chemical or biological modification is indispensable. Compared with small molecules, the modification of polymers is more difficult and the methods are more diverse. Choosing appropriate modification method directly determines the success or not of the research, therefore, it is necessary to summarize the polymer modification methods toward nanopores. In addition, it is also important to provide clear and convincing evidence that the nanopore modification is successful, the corresponding characterization methods are also indispensable. Therefore, this review will summarize the methods of polymer modification of nanopores and efficient characterization methods. And we hope that this review will provide some reference value for like-minded researchers.

Aerosol capture and coronavirus spike protein deactivation by enzyme functionalized antiviral membranes

The airborne nature of coronavirus transmission makes it critical to develop new barrier technologies that can simultaneously reduce aerosol and viral spread. Here, we report nanostructured membranes with tunable thickness and porosity for filtering coronavirus-sized aerosols, combined with antiviral enzyme functionalization that can denature spike glycoproteins of the SARS-CoV-2 virus in low-hydration environments. Thin, asymmetric membranes with subtilisin enzyme and methacrylic functionalization show more than 98.90% filtration efficiency for 100-nm unfunctionalized and protein-functionalized polystyrene latex aerosol particles. Unfunctionalized membranes provided a protection factor of 540 ± 380 for coronavirus-sized particle, above the Occupational Safety and Health Administration's standard of 10 for N95 masks. SARS-CoV-2 spike glycoprotein on the surface of coronavirus-sized particles was denatured in 30 s by subtilisin enzyme-functionalized membranes with 0.02-0.2% water content on the membrane surface.

Dual-Functional Nanofiltration and Adsorptive Membranes for PFAS and Organics Separation from Water

Challenges associated with water separation technologies for per- and polyfluoroalkyl substances (PFASs) require efficient and sustainable processes supported by a proper understanding of the separation mechanisms. The solute rejections by nanofiltration (NF) at pH values near the membrane isoelectric point were compared to the size- and mass-transfer-dependent modeled rejection rates of these compounds in an ionized state. We find that the low pK a value of perfluorooctanoic acid (PFOA) relates to enhanced solute exclusions by minimizing the presence and partitioning of the protonated organic compound into the membrane domain. The effects of Donnan exclusion are moderate, and co-ion transport also contributes to the PFAS rejection rates. An additional support barrier with thermo-responsive (quantified by water permeance variation) adsorption/desorption properties allows for enhanced separations of PFAS. This was possible by successfully synthesizing an NF layer on top of a poly-N-isopropylacrylamide (PNIPAm) pore-functionalized microfiltration support structure. The support layer adsorbs organics (178 mg PFOA adsorbed/m2 membrane at an equilibrium concentration of 70 mg/L), and the simultaneous exclusion from the NF layer allows separations of PFOA and the smaller sized heptafluorobutyric acid from solutions containing 70 μg/L of these compounds at a high water flux of 100 L/m2-h at 7 bar.

Bioinspired laccase-mimicking catalyst for on-site monitoring of thiram in paper-based colorimetric platform

A long-standing goal has been to create artificial enzymes with natural enzyme-like catalytic activity. Herein, a laccase-mimicking catalyst (GSH-Cu) is designed by simulating the copper active sites and spatial amino acid microenvironment of natural enzymes. In particular, the engineered GSH-Cu shows a catalytic function that conforms to Michaelis-Menten kinetics of natural laccase. The high catalytic activity of GSH-Cu can be easily inhibited by thiram through surface passivation to produce copper nanoparticles. We demonstrate that the developed GSH-Cu with high stability and recyclability can be used to fabricate effective colorimetric sensor for sensitive detection of thiram. The resulting absorption intensity can be employed to quantify thiram in the range of 2.5-250 ng mL^-1, which meets the detection requirement in fruit. Bestowed with the feasibility analysis of colorimetric output, a portable platform is designed by integrating GSH-Cu based test paper with a conventional smartphone for conveniently on-site quantified thiram. The proposed strategy about engineering enzyme-mimicking catalysts with excellent catalytic performance will open avenues for boosting the sensing application.

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.

Catalytic Membrane Nanoreactor with Cu-Agx Bimetallic Nanoparticles Immobilized in Membrane Pores for Enhanced Catalytic Performance

A catalytic membrane nanoreactor (CMNR) with Cu-Ag_x (where x is the millimolar concentration of AgNO₃) bimetallic catalysts immobilized in membrane pores has been fabricated via coupling flowing synthesis and replacement reaction. Surface characterization by transmission electron microscopy (TEM) gives obvious evidence of the formation of Cu-Ag bimetallic core-shell nanostructures with Ag islands deposited on the Cu core metal. An apparent high shift phenomenon for the Cu element and a low shift phenomenon for the Ag element was determined by X-ray photoelectron spectroscopy (XPS), indicating a close interaction with the transfer of electron density from the Cu atom to the Ag atom. The hydrogenation catalysis of p-nitrophenol (p-NP) was tested to evaluate the catalytic performance. During the catalytic process, the Cu core acts as an electron-deficient site to adsorb and activate the -NO₂ group for p-NP, and the Ag shell is beneficial for enhancing active H spilling to the Cu surface and then performing hydrogenation. A volcano-shaped apparent reaction rate constant can be achieved, which rises initially with the increasing Ag content and subsequently drops with a further increase in the Ag content. The highest value of 1071 min^-1 can be achieved for CMNR immobilized with Cu-Ag₂ owing to the suitable adsorption activation behavior and the best hydrogen spillover behavior.

Copper ions binding regulation for the high-efficiency biodegradation of ciprofloxacin and tetracycline-HCl by low-cost permeabilized-cells

Cu²⁺ plays a decisive role for the bio-oxidation in the active center of laccase. In the fermentation-purified process, the loss of Cu²⁺ reduces the activity and the high cost limits the application of laccase. In this study, a fermentation-permeabilization combined process were developed which based on the regulation of Cu²⁺ binding time to produce the permeabilized-cells containing laccase, in which Cu²⁺ can enter the cells freely to greatly improve the laccase activity and reduce the immobilization cost by about 19 times. So, the permeabilized-cells is suitable for biodegradation of antibiotic pollution in the environment, which was applied for the biodegradation of ciprofloxacin (CIP) and tetracycline-HCl (TCH) and the degradation efficiency reached 95.42% and 98.73%, respectively, with low ecotoxicity of the degradation products. Finally, the degradation mechanism was analyzed theoretically by molecular docking. Therefore, this study provided a low-cost, eco-friendly, and widely applicable method for organic pollutants removal.

Photoenzymatic Activity of Artificial-Natural Bienzyme Applied in Biodegradation of Methylene Blue and Accelerating Polymerization of Dopamine

Enzymes as biocatalysts have attracted extensive attention. In addition to immobilizing or encapsulating various enzymes for combating the easy loss of enzymatic activity, strengthening the enzymatic activity upon light irradiation is a challenge. To the best of our knowledge, the work of spatiotemporally modulating the catalytic activity of artificial-natural bienzymes with a near-infrared light irradiation has not been reported. Inspired by immobilized enzymes and nanozymes, herein a platinum nanozyme was synthesized; subsequently, the platinum nanozyme was grafted on the body of laccase, thus successfully obtaining the artificial-natural bienzyme. The three-dimensional structure of the artificial-natural bienzyme was greatly different from that of the immobilized enzyme or the encapsulated enzyme. The platinum nanozyme possessed excellent laccase-like activity, which was 3.7 times higher than that of laccase. Meanwhile, the coordination between the platinum nanozyme and laccase was proved. Besides, the cascaded catalysis of artificial-natural bienzyme was verified with hydrogen peroxide as a mediator. The enzymatic activities of artificial-natural bienzyme with and without near-infrared light irradiation were, respectively, 46.2 and 29.5% higher than that of free laccase. Moreover, the reversible catalytic activity of the coupled enzyme could be manipulated with and without a near-infrared light at 808 nm. As a result, the degradation rates of methylene blue catalyzed by the coupled enzyme and the platinum nanozyme were higher than that of laccase. Furthermore, accelerating polymerization of the dopamine was also demonstrated. Briefly, this facile strategy may provide a universal approach to control the catalytic activity of other natural enzymes.

Polyelectrolytes as Building Blocks for Next-Generation Membranes with Advanced Functionalities

The global society is in a transition, where dealing with climate change and water scarcity are important challenges. More efficient separations of chemical species are essential to reduce energy consumption and to provide more reliable access to clean water. Here, membranes with advanced functionalities that go beyond standard separation properties can play a key role. This includes relevant functionalities, such as stimuli-responsiveness, fouling control, stability, specific selectivity, sustainability, and antimicrobial activity. Polyelectrolytes and their complexes are an especially promising system to provide advanced membrane functionalities. Here, we have reviewed recent work where advanced membrane properties stem directly from the material properties provided by polyelectrolytes. This work highlights the versatility of polyelectrolyte-based membrane modifications, where polyelectrolytes are not only applied as single layers, including brushes, but also as more complex polyelectrolyte multilayers on both porous membrane supports and dense membranes. Moreover, free-standing membranes can also be produced completely from aqueous polyelectrolyte solutions allowing much more sustainable approaches to membrane fabrication. The Review demonstrates the promise that polyelectrolytes and their complexes hold for next-generation membranes with advanced properties, while it also provides a clear outlook on the future of this promising field.

Bioinspired Graphene Oxide Membranes with pH-Responsive Nanochannels for High-Performance Nanofiltration

Tunable gating graphene oxide (GO) membranes with high water permeance and precise molecular separation remain highly desired in smart nanofiltration devices. Herein, bioinspired by the filtration function of the renal glomerulus, we report a smart and high-performance graphene oxide membrane constructed via introducing positively charged polyethylenimine-grafted GO (GO-PEI) to negatively charged GO nanosheets. It was found that the additional GO-PEI component changed the surface charge, improved the hydrophilicity, and enlarged the nanochannels. The glomerulus-inspired graphene oxide membrane (G-GOM) shows a water permeance up to 88.57 L m^-2 h^-1 bar^-1, corresponding to a 4 times enhancement compared with that of a conventional GO membrane due to the enlarged confined nanochannels. Meanwhile, owing to the electrostatic interaction, it can selectively remove positively charged methylene blue at pH 12 and negatively charged methyl orange at pH 2, with a removal rate of over 96%. The high and cyclic water permeance and highly selective organic removal performance can be attributed to the synergic effect of controlled nanochannel size and tunable electrostatic interaction in responding to the environmental pH. This strategy provides insight into designing pH-responsive gating membranes with tunable selectivity, representing a great advancement in smart nanofiltration with a wide range of applications.

Design of Switchable Enzyme Carriers Based on Stimuli-Responsive Porous Polymer Membranes for Bioapplications

Design of efficient enzyme carriers, where enzymes are conjugated to supports, has become an attractive research avenue. Immobilized enzymes are advantageous for practical applications because of their convenience in handling, ease of separation, and good reusability. However, the main challenge is that these traditional enzyme carriers are unable to regulate the enzymolysis efficiency or to protect the enzymes from proteolytic degradation, which restricts their effectiveness of enzymes in bioapplications. Enlightened by the stimuli-responsive channels in the natural cell membranes, conjugation of the enzymes within flat-sheet stimuli-responsive porous polymer membranes (SR-PPMs) as artificial cell membranes is an efficient strategy for circumventing this challenge. Controlled by the external stimuli, the multifunctional polymer chains, which are incorporated within the membranes and attached to the enzyme, change their structures to defend the enzyme from the external environmental disturbances and degradation by proteinases. Specifically, smart SR-PPM enzyme carriers (SR-PPMECs) not only permit convective substrate transfer through the accessible porous network, dramatically improving enzymolysis efficiency due to the adjustable pore sizes and the confinement effect, but they also act as molecular switches for regulating its permeability and selectivity. In this review, the concept of SR-PPMECs is presented. It covers the latest developments in design strategies of flat-sheet SR-PPFMs, fabrication protocols of SR-PPFMECs, strategies for the regulation of enzymolysis efficiency, and their cutting-edge bioapplications.

Cu-Ag Bimetallic Core-shell Nanoparticles in Pores of a Membrane Microreactor for Enhanced Synergistic Catalysis

A bimetallic catalytic membrane microreactor (CMMR) with bimetallic nanoparticles in membrane pores has been fabricated via flowing synthesis. The bimetallic nanoparticle is successfully immobilized in membrane pores along its thickness direction. Enhanced synergistic catalysis can be expected in this CMMR. As a concept-of-proof, Cu-Ag core-shell nanoparticles have been fabricated and immobilized in membrane pores for p-nitrophenol (p-NP) hydrogenation. Transmission electron microscopy (TEM) for the characterization of the bimetallic core-shell nanostructure and X-ray photoelectron spectroscopy (XPS) for the characterization of the electron transfer behavior between Cu-Ag bimetal have been performed. The Ag shell on the core of Cu can improve the utilization of Ag atoms, and electron transfer between bimetallic components can promote the formation of high electron density active sites as well as active hydrogen with strong reducing properties on the Ag surface. The dispersed membrane pore can prevent nanoparticle aggregation, and the contact between the reaction fluid and catalyst is enhanced. The enhanced mass transfer can be achieved by the plug-flow mode during the process of hydrogenation catalysis. The p-NP conversion rate being over 95% can be obtained under the condition of a membrane flux of 1.59 mL·cm^-2·min^-1. This Cu-Ag/PES CMMR has good stability and has a potential application in industry.

Determination of the Serum Concentrations of the Monoclonal Antibodies Bevacizumab, Rituximab, and Panitumumab Using Porous Membranes Containing Immobilized Peptide Mimotopes

Effective monoclonal antibody (mAb) therapies require a threshold mAb concentration in patient serum. Moreover, the serum concentration of the mAb Bevacizumab should reside in a specific range to avoid side effects. Methods for conveniently determining the levels of mAbs in patient sera could allow for personalized dosage schedules that lead to more successful treatments. This work utilizes microporous nylon membranes functionalized with antibody-binding peptides to capture Bevacizumab, Rituximab, or Panitumumab from diluted (25%) serum. Modification of the capture-peptide terminus is often crucial to creating the affinity necessary for effective binding. The high purity of eluted mAbs allows for their quantitation using native fluorescence, and membranes are effective in spin devices that can be used in any laboratory. The technique is effective over the therapeutic range of Bevacizumab concentrations. Future work aims at further modifications to develop rapid point-of-care devices and decrease detection limits.

Layer-by-layer assembly in nanochannels: assembly mechanism and applications

Layer-by-layer (LbL) assembly is a versatile technology to construct multifunctional nanomaterials using various supporting substrates, enabled by the large selection freedom of building materials and diversity of possible driving forces. The fine regulation over the film thickness and structure provides an elegant way to tune the physical/chemical properties by mild assembly conditions (e.g. pH, ion strength). In this review, we focus on LbL in nanochannels, which exhibit a different growth mechanism compared to "open", convex substrates. The assembly mechanism in nanochannels is discussed in detail, followed by the summary of applications of LbL assemblies liberated from nanochannel templates which can be used as nanoreactors, drug carriers and transporting channels across cell membranes. For fluidic applications, robust membrane substrates are required to keep in place nanotube arrays for membrane-based separation, purification, biosensing and energy harvesting, which are also discussed. The good compatibility of LbL with crossover technologies from other fields allows researchers to further extend this technology to a broader range of research fields, which is expected to result in an increased number of applications of LbL technology in the future.

Site-Specific Biofunctionalization of Cellulose and Poly(dimethylsiloxane): A Chemoenzymatic Approach for Surface Engineering

Site-specific, covalent immobilization of protein is of great importance in the design of bioanalytical devices. User-defined covalent coupling of protein onto the surface has been primarily limited to a noncanonical amino acid or cysteine residues. It is desirable to develop a new approach for site-specific biofunctionalization. Herein, we demonstrate a robust and modular chemoenzymatic approach for site-specific, covalent grafting of proteins onto a surface. The synthetic strategy relies on the combination of surface amine functionalization, followed by sortase-mediated coupling. The developed method was validated by site-specific immobilization of two model proteins (glutathione S-transferase and green fluorescent protein) on cellulose and polydimethylsiloxane surfaces via a short recognition motif (LPETG). The covalent coupling of immobilized proteins at the interface was characterized by Fourier Transform Infrared Spectroscopy in attenuated total reflectance mode, X-ray photoelectron spectroscopy, atomic force microscope, and fluorescent microscopy. This enzymatic surface functionalization approach could permit an oriented, homogeneous, and site-specific covalent tethering of LPETG-tag proteins to other materials under mild conditions.

Mercury Removal from Wastewater Using Cysteamine Functionalized Membranes

This study demonstrates a three-step process consisting of primary pre-filtration followed by ultrafiltration (UF) and adsorption with thiol-functionalized microfiltration membranes (thiol membranes) to effectively remove mercury sulfide nanoparticles (HgS NPs) and dissolved mercury (Hg2+) from wastewater. Thiol membranes were synthesized by incorporating either cysteine (Cys) or cysteamine (CysM) precursors onto polyacrylic acid (PAA)-functionalized polyvinylidene fluoride membranes. Carbodiimide chemistry was used to cross-link thiol (-SH) groups on membranes for metal adsorption. The thiol membranes and intermediates of the synthesis were tested for permeability and long-term mercury removal using synthetic waters and industrial wastewater spiked with HgS NPs and a Hg2+ salt. Results show that treatment of the spiked wastewater with a UF membrane removed HgS NPs to below the method detection level (<2 ppb) for up to 12.5 h of operation. Flux reductions that occurred during the experiment were reversible by washing with water, suggesting negligible permanent fouling. Dissolved Hg2+ species were removed to non-detection levels by passing the UF-treated wastewater through a CysM thiol membrane. The adsorption efficiency in this long-term study (>20 h) was approximately 97%. Addition of Ca2+ cations reduced the adsorption efficiencies to 82% for the CysM membrane and to 40% for the Cys membrane. The inferior performance of Cys membranes may be explained by the presence of a carboxyl (-COOH) functional group in Cys, which may interfere in the adsorption process in the presence of multiple cations because of multication absorption. CysM membranes may therefore be more effective for treatment of wastewater than Cys membranes. Focused ion beam characterization of a CysM membrane cross section demonstrates that the adsorption of heavy metals is not limited to the membrane surface but takes place across the entire pore length. Experimental results for adsorptions of selected heavy metals on thiol membranes over a wide range of operating conditions could be predicted with modeling. These results show promising potential industrial applications of thiol-functionalized membranes.

Miniaturized systems for evaluating enzyme activity in polymeric membrane bioreactors

Enzyme-coated polymeric membranes are versatile catalysts for biofuel production and other chemical production from feedstock, like plant biomass. Such bioreactors are more energy efficient than high temperature methods because enzymes catalyze chemical reactions near room temperature. A major challenge in processing plant biomass is the presence of lignin, a complex aromatic polymer that resists chemical breakdown. Therefore, membranes coated with enzymes such as laccase that can degrade lignin are sought for energy extraction systems. We present an experimental study on optimizing an enzyme-based membrane bioreactor and investigate the tradeoff between high flow rate and short dwell time in the active region. In this work, zero flow rate voltammetry experiments confirm the electrochemical activity of Trametes versicolor laccase on conductive polymer electrodes, and a flow-through spectroscopy device with laccase-coated porous nylon membranes is used with a colorimetric laccase activity indicator to measure the catalysis rate and percent conversion as a function of reactant flow rate. Membrane porosity before and after laccase coating is verified with electron microscopy.

Thiol-Functionalized Membranes for Mercury Capture from Water

Pore functionalized membranes with appropriate ion exchange/chelate groups allow toxic metal sorption under convective flow conditions. This study explores the sorption capacity of ionic mercury in a polyvinylidene fluoride-poly(acrylic acid) (PVDFs-PAA) functionalized membrane immobilized with cysteamine (MEA). Two methods of MEA immobilization to the PVDF-PAA membrane have been assessed: (i) ion exchange (IE) and (ii) carbodiimide cross-linker chemistry using 1-(3-dimethylaminopropyl)-3-ethyl carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS), known as EDC/NHS coupling. The ion exchange method demonstrates that cysteamine (MEA) can be immobilized effectively on PVDF-PAA membranes without covalent attachment. The effectiveness of the MEA immobilized membranes to remove ionic mercury from the water was evaluated by passing a dissolved mercury(II) nitrate solution through the membranes. The sorption capacity of mercury for MEA immobilized membrane prepared by the IE method is 1015 mg/g PAA. On the other hand, the sorption capacity of mercury for MEA immobilized membrane prepared by EDC/NHS chemistry is 2446 mg/g PAA, indicating that membrane functionalization by EDC/NHS coupling enhanced mercury sorption 2.4 times compared to the IE method. The efficiencies of Hg removal are 94.1 ± 1.1 and 99.1 ± 0.1% for the MEA immobilized membranes prepared by IE and EDC/NHS coupling methods, respectively. These results show potential applications of MEA immobilized PVDF-PAA membranes for industrial wastewater treatment specifically from energy and mining industries to remove mercury and other toxic metals.

Synthesis of magnetic nanoparticles with an IDA or TED modified surface for purification and immobilization of poly-histidine tagged proteins

Magnetic nanoparticles (MNPs) chelating with metal ions can specifically interact with poly-histidine peptides and facilitate immobilization and purification of proteins with poly-histidine tags. Fabrication of MNPs is generally complicated and time consuming. In this paper, we report the preparation of Ni(ii) ion chelated MNPs (Ni-MNPs) in two stages for protein immobilization and purification. In the first stage, organic ligands including pentadentate tris (carboxymethyl) ethylenediamine (TED) and tridentate iminodiacetic acid (IDA) and inorganic Fe₃O₄–SiO₂ MNPs were synthesized separately. In the next stage, ligands were grafted to the surface of MNPs and MNPs with a TED or IDA modified surface were acquired, followed by chelating with Ni(ii) ions. The Ni(ii) ion chelated forms of MNPs (Ni-MNPs) were characterized including morphology, surface charge, structure, size distribution and magnetic response. Taking a his-tagged glycoside hydrolase DspB (Dispersin B) as the protein representative, specific interactions were confirmed between DspB and Ni-MNPs. Purification of his-tagged DspB was achieved with Ni-MNPs that exhibited better performance in terms of purity and activity of DspB than commercial Ni-NTA. Ni-MNPs as enzyme carriers for DspB also exhibited good compatibility and reasonable reusability as well as improved performance in various conditions.

This article reports a novel approach for synthesizing magnetic nanoparticles with a modified surface for purification and immobilization of histidine-tagged proteins.

Improving laccase activity and stability by HKUST-1 with cofactor via one-pot encapsulation and its application for degradation of bisphenol A

Enhancing the catalytic activity and stability of enzymes is of great importance in the development of green chemical and cost-effective application, with removal of bisphenol A (BPA) as a prominent example. Engineering immobilization carriers and immobilization methods of enzymes endows great potential to achieve above goal. Until now, these reports have focused on employing the metal-organic frameworks (MOFs) to increase the stability and reusability of enzymes, an enhancement in its catalytic activity has yet to be addressed. This work introduced a biomimetic mineralization process for facile synthesis of laccase@HKUST-1 biocomposite under mild condition. By exploiting the activity of laccase@HKUST-1, we demonstrated, for the first time, that the integration of laccase and HKUST-1 containing cofactor Cu²⁺ ions leaded to 1.5-fold enhancement in the catalytic activity compared with free laccase, which was due to the synergistic enhancement of substrate oxidation. Indeed, the laccase@HKUST-1 biocomposite could function as active biocatalysts under biologically challenging conditions, such as acidic condition, high temperature, organic solvent, and continuous operation. The oxidation of phenols, such as BPA, with laccase@HKUST-1 reached higher catalytic performance than free laccase, and gave 100% degradation efficiency within 4 h. This study provides a feasible method to improve the activity and stability of laccase, which enable completely remove of BPA from the environment.

Immobilization of laccase on hollow mesoporous carbon nanospheres: Noteworthy immobilization, excellent stability and efficacious for antibiotic contaminants removal

In this study, the hollow mesoporous carbon spheres (HMCs) were synthesized and modified for laccase (Lac) immobilization, and the structural characteristics of HMCs materials were determined by FESEM, TEM and FTIR etc. The maximum loading of Lac on the HMCs materials could reach 835 mg/g, meanwhile, the immobilized Lac exhibited excellent thermo-stability, pH stability, storage stability and reusability. The antibiotics removal experiments indicated that the immobilized Lac possess efficient removal efficiency for both tetracycline hydrochloride (TCH) and ciprofloxacin hydrochloride (CPH) in the presence of redox mediator. The synergy of the adsorption by HMCs and the degradation by Lac could be the reasons for the high removal of antibiotics. Meanwhile, for investigating degradation mechanism, the degradation product analysis and molecular docking method had been introduced to this study. According to the degradation products, dehydroxylation and demethylation are major degradation reactions for TCH degradation, and the oxidation of the piperazinyl substituent and hydroxylation are the major degradation for CPH degradation. The docking results showed that some important residues played the key role in the degradation process. This study indicated that the immobilization of Lac on HMCs could be potentially applied in environmental remediation of antibiotics.

Layer by layer supported laccase on lignin nanoparticles catalyzes the selective oxidation of alcohols to aldehydes

Lignin nanoparticles support laccase from Trametes versicolor in the selective oxidation of alcohols to aldehydes, in the presence of redox mediators.

Biomimetic Silicification on Membrane Surface for Highly Efficient Treatments of Both Oil-in-Water Emulsion and Protein Wastewater

The worldwide water crisis and water pollution have put forward great challenges to the current membrane technology. Although poly(vinylidene fluoride) (PVDF) porous membranes can find diverse applications for water treatments, the inherent hydrophilicity must be tuned for an energy-/time-saving process. Herein, the surface wettability of PVDF membranes transforming from highly hydrophobicity to highly hydrophilicity was realized via one-step reaction of plant-derived phenol gallic acid and γ-aminopropyltriethoxysilane in aqueous solutions. The surface hydrophilicization can be achieved on porous PVDF membranes by virtue of integration of a mussel-inspired coating and in situ silicification via a "pyrogallol-amino covalent bridge" toward excellent antifouling performance and highly efficient infiltration ability for oily emulsion and protein wastewater treatment. The water flux of a surface-manipulated microfiltration membrane can reach ca. 9246 L m^-2 h^-1 (54-fold increment compared to that of pristine membrane), oil rejection >99.5% in a three-cycle emulsion separation; the modified ultrafiltration membrane demonstrated benign performance in bovine serum albumin protein interception (rejection as high as ca. 96.6% with water flux of ca. 278.2 L m^-2 h^-1) and antifouling potential (increase of ca. 70.8%). Our in situ biomimetic silicification under "green" conditions exhibits the great potential of the developed strategy in fabrication of similar multifunctional membranes toward environmental remediation.

Role of membrane pore polymerization conditions for pH responsive behavior, catalytic metal nanoparticle synthesis, and PCB degradation

This article describes the effects of changing monomer and cross-linker concentrations on the mass gain, water permeability, Pd-Fe nanoparticle (NP) loading, and the rate of degradation of 3,3',4,4',5-pentachlorobiphenyl (PCB 126) of pore functionalized polyvinylidene fluoride (PVDF) membranes. In this study, monomer (acrylic acid (AA)) and cross-linker (N, N'- methylene-bis (acrylamide)) concentrations were varied from 10 to 20 wt% of polymer solution and 0.5-2 mol% of monomer concentration, respectively. Results showed that responsive behavior of membrane could be tuned in terms of water permeability over a range of 270-1 L m-2 h-1 bar-1, which is a function of water pH. The NP size on the membrane surface was found in the range of 16-23 nm. With increasing cross-linker density the percentage of smaller NPs (< 10 nm) increases due to smaller mesh size formation during in-situ polymerization of membrane. NP loading was found to vary from 0.21 to 0.94 mg per cm2 of membrane area depending on the variation of available carboxyl groups in membrane pore domain. The NPs functionalized membranes were then tested for use as a platform for the degradation of PCB 126. The observed batch reaction rate (Kobs) for PCB 126 degradation for per mg of catalyst loading was found 0.08-0.1 h-1. Degradation study in convective flow mode shows 98.6% PCB 126 is degraded at a residence time of 46.2 s. The corresponding surface area normalized reaction rate (K sa ) is found about two times higher than K sa of batch degradation; suggesting elimination of the effect of diffusion resistance for degradation of PCB 126 in convective flow mode operation. These Pd-Fe-PAA-PVDF membranes and nanoparticles are characterized by TGA, contact angle measurement, surface zeta potential, XRD, SEM, XPS, FIB, TEM and other techniques reveal the details about the membrane surface, pores and nanoparticles size, shape and size-distribution. Statistical analysis based on experimental results allows us to depict responsive behavior of functionalized membrane. In our best knowledge this paper first time reports detail study on responsive behavior of pore functionalized membrane in terms of permeability, NPs size, metal loading and its effect on PCB 126 degradation in a quantified approach.

Multienzyme immobilized polymeric membrane reactor for transformation of lignin model compound

We have developed a multienzyme functionalized membrane reactor for bioconversion of lignin model compound involving enzymatic catalysis. Layer-by-layer approach was used to immobilize three different enzymes (glucose oxidase, peroxidase and laccase) into pH-responsive membranes. This novel membrane reactor couples the in situ generation of hydrogen peroxide (by glucose oxidase) to oxidative conversion of a lignin model compound, guaiacylglycerol-B-guaiacylether (GGE). Preliminary investigation of the efficacy of these functional membranes towards GGE degradation is demonstrated under convective flow mode. Over 90% of the initial feed could be degraded with the multienzyme immobilized membranes at a residence time of approximately 22 seconds. GGE conversion product analysis revealed formation of oligomeric oxidation products with peroxidase, which might be potential hazard to membrane bioreactors. These oxidation products could be further degraded by laccase enzymes in the multienzymatic membranes explaining the potential of multienzyme membrane reactors. The multienzyme incorporated membrane reactors were active for about a month time of storage at 4 °C, and retention of activity was demonstrated after repetitive use.

Laccase-Mediated Grafting on Biopolymers and Synthetic Polymers: A Critical Review

Laccase-mediated grafting on lignocelluloses has gained considerable attention as an environmentally benign method to covalently modify wood, paper and cork. In recent decades this technique has also been employed to modify fibres with a polysaccharide backbone, such as cellulose or chitosan, to infer colouration, antimicrobial activity or antioxidant activity to the material. The scope of this approach has been further widened by researchers, who apply mediators or high redox potential laccases and those that modify synthetic polymers and proteins. In all cases, the methodology relies on one- or two-electron oxidation of the surface functional groups or of the graftable molecule in solution. However, similar results can very often be achieved through simple deposition, even after extensive washing. This unintended adsorption of the active substance could have an adverse effect on the durability of the applied coating. Differentiating between actual covalent binding and adsorption is therefore essential, but proves to be challenging. This review not only covers excellent research on the topic of laccase-mediated grafting over the last five to ten years, but also provides a critical comparison to highlight either the lack or presence of compelling evidence for covalent grafting.

Immobilization of Enzymes on a Phospholipid Bionically Modified Polysulfone Gradient-Pore Membrane for the Enhanced Performance of Enzymatic Membrane Bioreactors

Enzymatic membrane bioreactors (EMBRs), with synergistic catalysis-separation performance, have increasingly been used for practical applications. Generally, the membrane properties, particularly the pore structures and interface interactions, have a significant impact on the catalytic efficiency of the EMBR. Therefore, a biomimetic interface based on a phospholipid assembled onto a polysulfone hollow-fiber membrane with perfect radial gradient pores (RGM-PSF) has been prepared in this work to construct a highly efficient and stable EMBR. On account of the special pore structure of the RGM-PSF with the apertures decreasing gradually from the inner side to the outer side, the enzyme molecules could be evenly distributed on the three-dimensional skeleton of the membrane. In addition, the supported phospholipid layer in the membrane, prepared by physical adsorption, was used for the immobilization of the enzymes, which provides sufficient linkage to prevent the enzymes from leaching but also accommodates as many enzyme molecules as possible to retain high bioactivity. The properties of the EMBR were studied by using lipase from Candida rugosa for the hydrolysis of glycerol triacetate as a model. Energy-dispersive X-ray and circular dichroism spectroscopy were employed to observe the effect of lecithin on the membrane and structure changes in the enzyme, respectively. The operational conditions were investigated to optimize the performance of the EMBR by testing substrate concentrations from 0.05 to 0.25 M, membrane fluxes from 25.5 to 350.0 L·m-2·h-1, and temperatures from 15 to 55 °C. As a result, the obtained EMBR showed a desirable performance with 42% improved enzymatic activity and 78% improved catalytic efficiency relative to the unmodified membrane.