Out-of-Equilibrium Mechanical Disruption of β-Amyloid-Like Fibers using Light-Driven Molecular Motors

Artificial molecular motors have the potential to generate mechanical work on their environment by producing autonomous unidirectional motions when supplied with a source of energy. However, the harnessing of this mechanical work to subsequently activate various endoenergetic processes that can be useful in materials science remains elusive. Here, it is shown that by integrating a light-driven rotary motor through hydrogen bonds in a β-amyloid-like structure forming supramolecular hydrogels, the mechanical work generated during the constant rotation of the molecular machine under UV irradiation is sufficient to disrupt the β-amyloid fibers and to trigger a gel-to-sol transition at macroscopic scale. This melting of the gel under UV irradiation occurs 25 °C below the temperature needed to melt it by solely using thermal activation. In the dark, a reversible sol-gel transition is observed as the system fully recovers its original microstructure, thus illustrating the possible access to new kinds of motorized materials that can be controlled by advanced out-of-equilibrium thermodynamics.

Peeling-Stiffening Self-Adhesive Ionogel with Superhigh Interfacial Toughness

Self-adhesive materials that can directly adhere to diverse solid surfaces are indispensable in modern life and technologies. However, it remains a challenge to develop self-adhesive materials with strong adhesion while maintaining its intrinsic softness for efficient tackiness. Here, a peeling-stiffening self-adhesive ionogel that reconciles the seemingly contradictory properties of softness and strong adhesion is reported. The ionogel contains two ionophilic repeating units with distinct associating affinities, which allows to adaptively wet rough surface in the soft dissipating state for adhering, and to dramatically stiffen to the glassy state upon peeling. The corresponding modulus increases by 117 times driven by strain-rate-induced phase separation, which greatly suppresses crack propagation and results in a super high interfacial toughness of 8046 J m-2 . The self-adhesive ionogel is also transparent, self-healable, recyclable, and can be easily removed by simple moisture treatment. This strategy provides a new way to design high-performance self-adhesive materials for intelligent soft devices.

DNA-Driven Dynamic Assembly/Disassembly of Inorganic Nanocrystals for Biomedical Imaging

DNA-mediated programming is emerging as an effective technology that enables controlled dynamic assembly/disassembly of inorganic nanocrystals (NC) with precise numbers and spatial locations for biomedical imaging applications. In this review, we will begin with a brief overview of the rules of NC dynamic assembly driven by DNA ligands, and the research progress on the relationship between NC assembly modes and their biomedical imaging performance. Then, we will give examples on how the driven program is designed by different interactions through the configuration switching of DNA-NC conjugates for biomedical applications. Finally, we will conclude with the current challenges and future perspectives of this emerging field. Hopefully, this review will deepen our knowledge on the DNA-guided precise assembly of NCs, which may further inspire the future development of smart chemical imaging devices and high-performance biomedical imaging probes.

Cell-Like Capsules with "Smart" Compartments

Eukaryotic cells have inner compartments (organelles), each with distinct properties and functions. One mimic of this architecture, based on biopolymers, is the multicompartment capsule (MCC). Here, MCCs in which the inner compartments are chemically unique and "smart," i.e., responsive to distinct stimuli in an orthogonal manner are created. Specifically, one compartment alone is induced to degrade when the MCC is contacted with an enzyme while other compartments remain unaffected. Similarly, just one compartment gets degraded upon contact with reactive oxygen species generated from hydrogen peroxide (H₂ O₂ ). And thirdly, one compartment alone is degraded by an external, physical stimulus, namely, by irradiating the MCC with ultraviolet (UV) light. All these specific responses are achieved without resorting to complicated chemistry to create the compartments: the multivalent cation used to crosslink the biopolymer alginate (Alg) is simply altered. Compartments of Alg crosslinked by Ca²⁺ are shown to be sensitive to enzymes (alginate lyases) but not to H₂ O₂ or UV, whereas the reverse is the case with Alg/Fe³⁺ compartments. These results imply the ability to selectively burst open a compartment in an MCC "on-demand" (i.e., as and when needed) and using biologically relevant stimuli. The results are then extended to a sequential degradation, where compartments in an MCC are degraded one after another, leaving behind an empty MCC lumen. Collectively, this work advances the MCC as a platform that not only emulates key features of cellular architecture, but can also begin to capture rudimentary cell-like behaviors.

Longevity of System Functions in Biology and Biomimetics: A Matter of Robustness and Resilience

Within the framework of a circular economy, we aim to efficiently use raw materials and reduce waste generation. In this context, the longevity of biomimetic material systems can significantly contribute by providing robustness and resilience of system functionality inspired by biological models. The aim of this review is to outline various principles that can lead to an increase in robustness (e.g., safety factor, gradients, reactions to environmental changes) and resilience (e.g., redundancy, self-repair) and to illustrate the principles with meaningful examples. The study focuses on plant material systems with a high potential for transfer to biomimetic applications and on existing biomimetic material systems. Our fundamental concept is based on the functionality of the entire system as a function of time. We use functionality as a dimensionless measure of robustness and resilience to quantify the system function, allowing comparison within biological material systems and biomimetic material systems, but also between them. Together with the enclosed glossary of key terms, the review provides a comprehensive toolbox for interdisciplinary teams. Thus, allowing teams to communicate unambiguously and to draw inspiration from plant models when developing biomimetic material systems with great longevity potential.

Wireless electromechanical enantio-responsive valves

Microfluidic valves based on chemically responsive materials have gained considerable attention in recent years. Herein, a wireless enantio-responsive valve triggered by bipolar electrochemistry combined with chiral recognition is reported. A conducting polymer actuator functionalized with the enantiomers of an inherently chiral oligomer was used as bipolar valve to cover a tube loaded with a dye and immersed in a solution containing chiral analytes. When an electric field is applied, the designed actuator shows a reversible cantilever-type deflection, allowing the release of the dye from the reservoir. The tube can be opened and closed by simply switching the polarity of the system. Qualitative results show the successful release of the colorant, driven by chirality and redox reactions occurring at the bipolar valve. The device works well even in the presence of chemically different chiral analytes in the same solution. These systems open up new possibilities in the field of microfluidics, including also controlled drug delivery applications.

Environmentally Responsive Materials for Building Envelopes: A Review on Manufacturing and Biomimicry-Based Approaches

Buildings must adapt and respond dynamically to their environment to reduce their energy loads and mitigate environmental impacts. Several approaches have addressed responsive behavior in buildings, such as adaptive and biomimetic envelopes. However, biomimetic approaches lack sustainability consideration, as conducted in biomimicry approaches. This study provides a comprehensive review of biomimicry approaches to develop responsive envelopes, aiming to understand the connection between material selection and manufacturing. This review of the last five years of building construction and architecture-related studies consisted of a two-phase search query, including keywords that answered three research questions relating to the biomimicry and biomimetic-based building envelopes and their materials and manufacturing and excluding other non-related industrial sectors. The first phase focused on understanding biomimicry approaches implemented in building envelopes by reviewing the mechanisms, species, functions, strategies, materials, and morphology. The second concerned the case studies relating to biomimicry approaches and envelopes. Results highlighted that most of the existing responsive envelope characteristics are achievable with complex materials requiring manufacturing processes with no environmentally friendly techniques. Additive and controlled subtractive manufacturing processes may improve sustainability, but there is still some challenge to developing materials that fully adapt to large-scale and sustainability needs, leaving a significant gap in this field.

The aqueous supramolecular chemistry of crown ethers

This mini-review summarizes the seminal exploration of aqueous supramolecular chemistry of crown ether macrocycles. In history, most research of crown ethers were focusing on their supramolecular chemistry in organic phase or in gas phase. In sharp contrast, the recent research evidently reveal that crown ethers are very suitable for studying abroad range of the properties and applications of water interactions, from: high water-solubility, control of Hofmeister series, "structural water", and supramolecular adhesives. Key studies revealing more details about the properties of water and aqueous solutions are highlighted.

Responsive Optical Materials Based on Ligand-Free Perovskite Quantum Dots Embedded in Mesoporous Scaffolds

Herein we show that dispersing inorganic cesium lead bromide (CsPbBr₃) perovskite quantum dots (QDs) in optical quality films, possessing an accessible and controlled pore size distribution, gives rise to fluorescent materials with a controlled and highly sensitive response to ambient changes. A scaffold-based synthesis approach is employed to obtain ligand-free QDs, whose pristine surface endows them with high sensitivity to the presence of different vapors in their vicinity. At the same time, the void network of the host offers a means to gradually expose the embedded QDs to such vapors. Under these conditions, the luminescent response of the QDs is mediated by the mesostructure of the matrix, which determines the rate at which vapor molecules will adsorb onto the pore walls and, eventually, condensate, filling the void space. With luminescence quantum yields as high as 60%, scaffold-supported ligand-free perovskite nanocrystals display intense photoemission signals over the whole process, as well as high photo- and chemical stability, which allows illuminating them for long periods of time and recovering the original response upon desorption of the condensed phase. The results herein presented open a new route to explore the application of perovskite QD-based materials in sensing.

Morphology of Polymer Brushes in the Presence of Attractive Nanoparticles: Effects of Temperature

We study the role of temperature on the structure of pure polymer brushes and their mixture with attractive nanoparticles in flat and cylindrical geometries. It has previously been established that the addition of such nanoparticles causes the polymer brush to collapse and the intensity of the collapse depends on the attraction strength, the nanoparticle diameter, and the grafting density. In this work, we carry out molecular dynamics simulation under good solvent conditions to show how the collapse transition is affected by the temperature, for both plane grafted and inside-cylinder grafted brushes. We first examine the pure brush morphology and verify that the brush height is insensitive to temperature changes in both planar and cylindrical geometries, as expected for a polymer brush in a good solvent. On the other hand, for both system geometries, the brush structure in the presence of attractive nanoparticles is quite responsive to temperature changes. Generally speaking, for a given nanoparticle concentration, increasing the temperature causes the brush height to increase. A brush which contracts when nanoparticles are added eventually swells beyond its pure brush height as the system temperature is increased. The combination of two easily controlled external parameters, namely, concentration of nanoparticles in solution and temperature, allows for sensitive and reversible adjustment of the polymer brush height, a feature which could be exploited in designing smart polymer devices.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

A review on control of droplet motion based on wettability modulation: principles, design strategies, recent progress, and applications

The transport of liquid droplets plays an essential role in various applications. Modulating the wettability of the material surface is crucial in transporting droplets without external energy, adhesion loss, or intense controllability requirements. Although several studies have investigated droplet manipulation, its design principles have not been categorized considering the mechanical perspective. This review categorizes liquid droplet transport strategies based on wettability modulation into those involving (i) application of driving force to a droplet on non-sticking surfaces, (ii) formation of gradient surface chemistry/structure, and (iii) formation of anisotropic surface chemistry/structure. Accordingly, reported biological and artificial examples, cutting-edge applications, and future perspectives are summarized.

Emerging Bioanalytical Devices and Platforms for Rapid Detection of Pathogens in Environmental Samples

The development of robust bioanalytical devices and biosensors for infectious pathogens is progressing well with the advent of new materials, concepts, and technology. The progress is also stepping towards developing high throughput screening technologies that can quickly identify, differentiate, and determine the concentration of harmful pathogens, facilitating the decision-making process for their elimination and therapeutic interventions in large-scale operations. Recently, much effort has been focused on upgrading these analytical devices to an intelligent technological platform by integrating them with modern communication systems, such as the internet of things (IoT) and machine learning (ML), to expand their application horizon. This review outlines the recent development and applications of bioanalytical devices and biosensors to detect pathogenic microbes in environmental samples. First, the nature of the recent outbreaks of pathogenic microbes such as foodborne, waterborne, and airborne pathogens and microbial toxins are discussed to understand the severity of the problems. Next, the discussion focuses on the detection systems chronologically, starting with the conventional methods, advanced techniques, and emerging technologies, such as biosensors and other portable devices and detection platforms for pathogens. Finally, the progress on multiplex assays, wearable devices, and integration of smartphone technologies to facilitate pathogen detection systems for wider applications are highlighted.

Unravelling the Supramolecular Driving Forces in the Formation of CO2-Responsive Pseudopeptidic Low-Molecular-Weight Hydrogelators

A new family of C₂-symmetric pseudopeptides with a high functional density for supramolecular interactions has been synthetized through the attachment of four amino acid subunits to a diamino aliphatic spacer. The resulting open-chain compounds present remarkable properties as low-molecular-weight hydrogelators. The self-assembled 3D networks were characterized by SEM analyses, observing regular nanofibres with 80–100 nm diameters. Spectroscopic and molecular modelling experiments revealed the presence of strong synergic effects between the H-bonding and π–π interactions, with the best results obtained for the homoleptic tetra-pseudopeptide derived from l-Phe. In addition, these bioinspired hydrogels possessed pH- and CO₂-responsive sol–gel transitions. The formation of ammonium carbamate derivatives in the presence of carbon dioxide led to a detrimental change in its adequate self-assembly. CO₂ desorption temperatures of ca. 70 °C were assigned to the thermodynamically favoured recovery of the supramolecular gel.

Dual-Functional Nanofiltration and Adsorptive Membranes for PFAS and Organics Separation from Water

Challenges associated with water separation technologies for per- and polyfluoroalkyl substances (PFASs) require efficient and sustainable processes supported by a proper understanding of the separation mechanisms. The solute rejections by nanofiltration (NF) at pH values near the membrane isoelectric point were compared to the size- and mass-transfer-dependent modeled rejection rates of these compounds in an ionized state. We find that the low pK _a value of perfluorooctanoic acid (PFOA) relates to enhanced solute exclusions by minimizing the presence and partitioning of the protonated organic compound into the membrane domain. The effects of Donnan exclusion are moderate, and co-ion transport also contributes to the PFAS rejection rates. An additional support barrier with thermo-responsive (quantified by water permeance variation) adsorption/desorption properties allows for enhanced separations of PFAS. This was possible by successfully synthesizing an NF layer on top of a poly-N-isopropylacrylamide (PNIPAm) pore-functionalized microfiltration support structure. The support layer adsorbs organics (178 mg PFOA adsorbed/m² membrane at an equilibrium concentration of 70 mg/L), and the simultaneous exclusion from the NF layer allows separations of PFOA and the smaller sized heptafluorobutyric acid from solutions containing 70 μg/L of these compounds at a high water flux of 100 L/m²-h at 7 bar.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique “microenvironment”, that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.

Bistability, Remanence, Read/Write-Memory, and Logic Gate Function via a Stimuli-Responsive Polymer

Stimuli-responsive materials change their state in response to external triggers. Switching between different states enables information to be written, stored, and read, if the transition between the states exhibits hysteresis. Thermally responsive polymers exhibit an intrinsic hysteresis for the volume phase transition between the swollen and de-swollen solution state. Here, it is shown that this hysteresis can be used to realize bistability, remanence, and reversible write/read information storage. This is demonstrated for the simplest and most widely used thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAM), as well as for PNIPAM block copolymers, which widens the hysteresis window. The hysteresis is shown to be related to cluster domain assembly/disassembly during the phase transition. Information can be written thermally using a laser, or using heated or cooled pen tips on a thin-film backscattering display. The bistable state can additionally be switched by pH, enabling an AND logic gate function. Furthermore, an unusual memory state is discovered, where information is visible in the hysteresis window and invisible at higher temperatures, allowing encoded information to be hidden. Since hysteresis is a very common intrinsic phenomenon for responsive materials, this principle to encode and store information is potentially applicable to a broad range of responsive materials.

Visible Light-Driven Jellyfish-like Miniature Swimming Soft Robot

Soft actuators that exhibit large deformation and can move at a fast speed in response to external stimuli have been in high demand for biomimetic applications. In this paper, we propose a convenient approach to fabricate a reversible and thermal-responsive composite hydrogel. Under the irradiation of visible light, the striped hydrogel can bend at a speed of up to 65.72°/s with carbon nanotubes loaded at a concentration of 3 mg/mL. A jellyfish-like miniature soft robot is made using this hydrogel. When driven by visible light, the robot can move at a maximum speed of 3.37 mm/s. Besides swimming, other motion modes, including walking and jumping, are also achieved by the robot. In addition, the robot can perform directional transportation of tiny objects. As a new actuation approach for the research of jellyfish-like miniature soft robots, this work is of great significance to the development of flexible bionic robots. Moreover, this work also offers some important insights into the research of biomimetic robots driven by visible light.

A Highly Robust Ionotronic Fiber with Unprecedented Mechanomodulation of Ionic Conduction

Stretchable ionic conductors are appealing for tissue-like soft electronics, yet suffer from a tardy mechanoelectric response due to their poor modulation of ionic conduction arising from intrinsic homogeneous soft chain network. Here, a highly robust ionotronic fiber is designed by synergizing ionic liquid and liquid crystal elastomer with alternate rigid mesogen units and soft chain spacers, which shows an unprecedented strain-induced ionic conductivity boost (≈10³ times enhanced as stretched to 2000% strain). Such a surprisingly high enhancement is attributed to the formation of microphase-separated low-tortuosity ion-conducting nanochannels guided by strain-induced emergence of aligned smectic mesophases, thus allowing for ultrafast ion transport that resembles the role of "swimming lanes." Intriguingly, the boosting conductivity even reverses Pouillet's Law-dictated resistance increase at certain strains, leading to unique waveform-discernible strain sensing. Moreover, the fiber retains thermal actuation properties with a maximum of 70% strain changes upon heating, and enables integrated self-perception and actuation. The findings offer a promising molecular engineering route to mechanically modulate the ion transport behavior of ionic conductors toward advanced ionotronic applications.

A Highly Versatile Polymer Network Based on Liquid Crystalline Dendrimers

Highly functional macromolecules with a well-defined architecture are the key to designing efficient and smart materials, and these polymeric systems can be tailored for specific applications in a diverse range of fields. Herein, the formation of a new liquid crystalline polymeric network based on the crosslinking of dendrimeric entities by the Cu^I-catalyzed variant of the Huisgen 1,3-dipolar cycloaddition of azides and alkynes to afford 1,2,3-triazoles is reported. The polymeric material obtained in this way is easy to process and exhibits a variety of properties, which include mesomorphism, viscoelastic behavior, and thermal contraction. The porous microstructure of the polymer network determines its capability to absorb solvent molecules and to encapsulate small molecules, like organic dyes, which can be released easily afterwards. Moreover, all these properties may be easily tuned by modifying the chemical structure of the constituent dendrimers, which makes this system a very interesting one for a number of applications.

Responsive Polyesters with Alkene and Carboxylic Acid Side-Groups for Tissue Engineering Applications

Main chain polyesters have been extensively used in the biomedical field. Despite their many advantages, including biocompatibility, biodegradability, and others, these materials are rather inert and lack specific functionalities which will endow them with additional biological and responsive properties. In this work, novel pH-responsive main chain polyesters have been prepared by a conventional condensation polymerization of a vinyl functionalized diol with a diacid chloride, followed by a photo-induced thiol-ene click reaction to attach functional carboxylic acid side-groups along the polymer chains. Two different mercaptocarboxylic acids were employed, allowing to vary the alkyl chain length of the polymer pendant groups. Moreover, the degree of modification, and as a result, the carboxylic acid content of the polymers, was easily tuned by varying the irradiation time during the click reaction. Both these parameters, were shown to strongly influence the responsive behavior of the polyesters, which presented adjustable pKα values and water solubilities. Finally, the difunctional polyesters bearing the alkene and carboxylic acid functionalities enabled the preparation of cross-linked polyester films by chemically linking the pendant vinyl bonds on the polymer side groups. The biocompatibility of the cross-linked polymers films was assessed in L929 fibroblast cultures and showed that the cell viability, proliferation, and attachment were greatly promoted on the polyester surface, bearing the shorter alkyl chain length side groups and the higher fraction of carboxylic acid functionalities.

Heat- and Light-Responsive Materials Through Pairing Dynamic Thiol-Michael and Coumarin Chemistry

Covalent adaptable networks (CANs) based on the thiol-Michael (TM) linkages can be thermal and pH responsive. Here, a new vinyl-sulfone-based thiol-Michael crosslinker is synthesized and incorporated into acrylate-based CANs to achieve stable materials with dynamic properties. Because of the reversible TM linkages, excellent temperature-responsive re-healing and malleability properties are achieved. In addition, for the first time, a photoresponsive coumarin moiety is incorporated with TM-based CANs to introduce light-mediated reconfigureability and postpolymerization crosslinking. Overall, these materials can be on demand dynamic in response to heat and light but can retain mechanical stability at ambient condition.

Dually Crosslinked Polymer Networks Incorporating Dynamic Covalent Bonds

Covalent adaptable networks (CANs) are polymeric networks containing covalent crosslinks that are dynamic under specific conditions. In addition to possessing the malleability of thermoplastics and the dimensional stability of thermosets, CANs exhibit a unique combination of physical properties, including adaptability, self-healing, shape-memory, stimuli-responsiveness, and enhanced recyclability. The physical properties and the service conditions (such as temperature, pH, and humidity) of CANs are defined by the nature of their constituent dynamic covalent bonds (DCBs). In response to the increasing demand for more sophisticated and adaptable materials, the scientific community has identified dual dynamic networks (DDNs) as a promising new class of polymeric materials. By combining two (or more) distinct crosslinkers in one system, a material with tailored thermal, rheological, and mechanical properties can be designed. One remarkable ability of DDNs is their capacity to combine dimensional stability, bond dynamicity, and multi-responsiveness. This review aims to give an overview of the advances in the emerging field of DDNs with a special emphasis on their design, structure-property relationships, and applications. This review illustrates how DDNs offer many prospects that single (dynamic) networks cannot provide and highlights the challenges associated with their synthesis and characterization.

Shape Programming by Modulating Actuation over Hierarchical Length Scales

Many active materials used in shape-morphing respond to an external stimulus by stretching or contracting along a director field. The programming of such actuators remains complex because of the single degree of freedom (the orientation) in local actuation. Here, texturing this field in zigzag patterns is shown to provide an extended family of biaxial active stretches out of an otherwise single uniaxial active deformation, opening a larger parameter space. By further modulating the zigzag patterns at the larger scale of the structure, its deployed shape can be controlled. This notion of texturing over hierarchical length scales follows geometrical principles, and is robust against changes in size and materials. The robustness of the approach is demonstrated by considering three different responsive materials: inextensible flat fabrics, channel-bearing elastomer (respectively, contracting and expanding perpendicularly to the director field when actuated pneumatically), and 3D-printed thermoplastic (composed of extruded filaments that contract when heated). It is shown that large-scale shape-morphing structures can be generated and that their geometry can be controlled with high accuracy.

Photo-switchable Fluorescence in Hydrogen-Bonded Liquid Crystals

A series of hydrogen-bonded liquid crystals showing switchable fluorescence is reported. The fluorescence behavior results from the unique combination of hydrogen bonding, liquid crystallinity, and photobasicity. Thus, the molecular mobility in the mesophase is essential for the reversible photo-initiated proton transfer switching on the fluorescence of the assemblies. The application potential of the materials for photo-patterning was demonstrated.

Fluorescent Metallosupramolecular Elastomers for Fast and Ultrasensitive Humidity Sensing

Fluorescent supramolecular polymers that can respond to subtle external stimuli to generate luminescence signals are promising in a wide range of applications, including probes, anti-counterfeiting materials, and sensors. However, complicated preparative procedures, limited responsive speed, and relatively low sensitivity still limit their practical sensing applications. Herein, we report europium-containing metallosupramolecular (PU-Eu) elastomers for fast and ultrasensitive humidity sensing by employing hygroscopic polyurethane (PU), whose urethane groups can coordinate with europium ions (Eu³⁺), emitting a strong luminescent signal by ligand-to-metal energy transfer. The variant of the coordination bond strength triggered by external humidity imparts the PU-Eu elastomer with a fast (∼1.1 s) and ultrasensitive response to the humid condition, where the external humidity increases by ∼1% and the corresponding fluorescence intensity will drop by ∼421.98 a.u. By a dip-coating process, PU-Eu elastomers can be conveniently coated on a hydrophilic and porous cellulose acetate nanofiber membrane, and the resulting composite membrane can achieve real-time and reversible monitoring of environmental humidity and human respiration. Given the versatility of PU-Eu elastomers, this study provides a low-cost and facile route of obtaining fluorescent metallosupramolecular polymers for fast and ultrasensitive humidity sensing.

Mechanical Stimulation of Adhesion Receptors Using Light-Responsive Nanoparticle Actuators Enhances Myogenesis

The application of cyclic strain is known to enhance myoblast differentiation and muscle growth in vitro and in vivo. However, current techniques apply strain to full tissues or cell monolayers, making it difficult to evaluate whether mechanical stimulation at the subcellular or single-cell scales would drive myoblast differentiation. Here, we report the use of optomechanical actuator (OMA) particles, comprised of a ∼0.6 μm responsive hydrogel coating a gold nanorod (100 × 20 nm) core, to mechanically stimulate the integrin receptors in myoblasts. When illuminated with near-infrared (NIR) light, OMA nanoparticles rapidly collapse, exerting mechanical forces to cell receptors bound to immobilized particles. Using a pulsed illumination pattern, we applied cyclic integrin forces to C2C12 myoblasts cultured on a monolayer of OMA particles and then measured the cellular response. We found that 20 min of OMA actuation resulted in cellular elongation in the direction of the stimulus and enhancement of nuclear YAP1 accumulation, an effector of ERK phosphorylation. Cellular response was dependent on direct conjugation of RGD peptides to the OMA particles. Repeated OMA mechanical stimulation for 5 days led to enhanced myogenesis as quantified using cell alignment, fusion, and sarcomeric myosin expression in myotubes. OMA-mediated myogenesis was sensitive to the geometry of stimulation but not to MEK1/2 inhibition. Finally, we found that OMA stimulation in regions proximal to the nucleus resulted in localization of the transcription activator YAP-1 to the nucleus, further suggesting the role of YAP1 in mechanotransduction in C2C12 cells. These findings demonstrate OMAs as a novel tool for studying the role of spatially localized forces in influencing myogenesis.

Soft, Stretchable, and Pneumatically Triggered Thermochromic Optical Filters with Embedded Phosphorescence

Phosphorescence is commonly used in nature to communicate using light. There are many ways to activate phosphorescence, including UV light, heat, and mechanical forces, but there are few methods to control phosphorescence once activated. Here, we present soft composite devices-which we call "optical filters"-for controlling the release of light by phosphorescence within a stretchable matrix. The filters consist of liquid metal wires, phosphorescent particles, and thermochromic pigments embedded in an elastomeric matrix. UV light initially activates the phosphorescence of rare-earth long-lasting luminescent particles. At room temperature, the thermochromic pigments block the phosphorescence from leaving the matrix. However, Joule heating of the liquid metal can change the opacity of the thermochromic pigments, which tunes the color, intensity, and wavelength of phosphorescence that exits the composite. In addition, the resistance of the liquid metal wires changes with physical deformation, thereby converting mechanical forces (strain, compression, and pneumatic inflation) into an optical response. Controlled phosphorescence, combined with the electrical conductivity of the liquid metal and the overall soft matrix, enables potential applications as an electronic skin for soft robotics, stretchable electronics, and prosthetics.

Pros and Cons: Supramolecular or Macromolecular: What Is Best for Functional Hydrogels with Advanced Properties?

Hydrogels are fascinating soft materials with unique properties. Many biological systems are based on hydrogel-like structures, underlining their versatility and relevance. The properties of hydrogels strongly depend on the structure of the building blocks they are composed of, as well as the nature of interactions between them in the network structure. Herein, gel networks made by supramolecular interactions are compared to covalent macromolecular networks, drawing conclusions about their performance and application as responsive materials.

Enlightening Materials with Photoswitches

Incorporating molecular photoswitches into various materials provides unique opportunities for controlling their properties and functions with high spatiotemporal resolution using remote optical stimuli. The great and largely still untapped potential of these photoresponsive systems has not yet been fully exploited due to the fundamental challenges in harnessing geometrical and electronic changes on the molecular level to modulate macroscopic and bulk material properties. Herein, progress made during the past decade in the field of photoswitchable materials is highlighted. After pointing to some general design principles, materials with an increasing order of the integrated photoswitchable units are discussed, spanning the range from amorphous settings over surfaces/interfaces and supramolecular ensembles, to liquid crystalline and crystalline phases. Finally, some potential future directions are pointed out in the conclusion. In view of the exciting recent achievements in the field, the future emergence and further development of light-driven and optically programmable (inter)active materials and systems are eagerly anticipated.

Viewpoint: From Responsive to Adaptive and Interactive Materials and Materials Systems: A Roadmap

Soft matter systems and materials are moving toward adaptive and interactive behavior, which holds outstanding promise to make the next generation of intelligent soft materials systems inspired from the dynamics and behavior of living systems. But what is an adaptive material? What is an interactive material? How should classical responsiveness or smart materials be delineated? At present, the literature lacks a comprehensive discussion on these topics, which is however of profound importance in order to identify landmark advances, keep a correct and noninflating terminology, and most importantly educate young scientists going into this direction. By comparing different levels of complex behavior in biological systems, this Viewpoint strives to give some definition of the various different materials systems characteristics. In particular, the importance of thinking in the direction of training and learning materials, and metabolic or behavioral materials is highlighted, as well as communication and information-processing systems. This Viewpoint aims to also serve as a switchboard to further connect the important fields of systems chemistry, synthetic biology, supramolecular chemistry and nano- and microfabrication/3D printing with advanced soft materials research. A convergence of these disciplines will be at the heart of empowering future adaptive and interactive materials systems with increasingly complex and emergent life-like behavior.

Shape Morphable Hydrogel/Elastomer Bilayer for Implanted Retinal Electronics

Direct fabrication of a three-dimensional (3D) structure using soft materials has been challenging. The hybrid bilayer is a promising approach to address this challenge because of its programable shape-transformation ability when responding to various stimuli. The goals of this study are to experimentally and theoretically establish a rational design principle of a hydrogel/elastomer bilayer system and further optimize the programed 3D structures that can serve as substrates for multi-electrode arrays. The hydrogel/elastomer bilayer consists of a hygroscopic polyacrylamide (PAAm) layer cofacially laminated with a water-insensitive polydimethylsiloxane (PDMS) layer. The asymmetric volume change in the PAAm hydrogel can bend the bilayer into a curvature. We manipulate the initial monomer concentrations of the pre-gel solutions of PAAm to experimentally and theoretically investigate the effect of intrinsic mechanical properties of the hydrogel on the resulting curvature. By using the obtained results as a design guideline, we demonstrated stimuli-responsive transformation of a PAAm/PDMS flower-shaped bilayer from a flat bilayer film to a curved 3D structure that can serve as a substrate for a wide-field retinal electrode array.

Mechanochemical Adhesion and Plasticity in Multifiber Hydrogel Networks

The extracellular matrix (ECM) has force-responsive (i.e., mechanochemical) properties that enable adaptation to mechanical loading through changes in fibrous network structure and interfiber bonding. Imparting such properties into synthetic fibrous materials will allow reinforcement under mechanical load, the potential for material self-adhesion, and the general mimicking of ECM. Multifiber hydrogel networks are developed through the electrospinning of multiple fibrous hydrogel populations, where fibers contain complementary chemical moieties (e.g., aldehyde and hydrazide groups) that form covalent bonds within minutes when brought into contact under mechanical load. These fiber interactions lead to microscale anisotropy, as well as increased material stiffness and plastic deformation. Macroscale structures (e.g., tubes and layered scaffolds) are fabricated from these materials through interfiber bonding and adhesion when placed into contact while maintaining a microscale fibrous architecture. The design principles for engineering plasticity described can be applied to numerous material systems to introduce unique properties, from textiles to biomedical applications.

Synthesis of Polyampholyte Janus-like Microgels by Coacervation of Reactive Precursors in Precipitation Polymerization

Controlling the distribution of ionizable groups of opposite charge in microgels is an extremely challenging task, which could open new pathways to design a new generation of stimuli-responsive colloids. Herein, we report a straightforward approach for the synthesis of polyampholyte Janus-like microgels, where ionizable groups of opposite charge are located on different sides of the colloidal network. This synthesis approach is based on the controlled self-assembly of growing polyelectrolyte microgel precursors during the precipitation polymerization process. We confirmed the morphology of polyampholyte Janus-like microgels and demonstrate that they are capable of responding quickly to changes in both pH and temperature in aqueous solutions.

Stimuli-Responsive Pure Protein Organogel Sensors and Biocatalytic Materials

Utilizing protein chemistry in organic solvents has important biotechnology applications. Typically, organic solvents negatively impact protein structure and function. Immobilizing proteins via cross-links to a support matrix or to other proteins is a common strategy to preserve the native protein function. Recently, we developed methods to fabricate macroscopic responsive pure protein hydrogels by lightly cross-linking the proteins with glutaraldehyde for chemical sensing and enzymatic catalysis applications. The water in the resulting protein hydrogel can be exchanged for organic solvents. The resulting organogel contains pure organic solvents as their mobile phases. The organogel proteins retain much of their native protein function, i.e., protein-ligand binding and enzymatic activity. A stepwise ethylene glycol (EG) solvent exchange was performed to transform these hydrogels into organogels with a very low vapor pressure mobile phase. These responsive organogels are not limited by solvent/mobile phase evaporation. The solvent exchange to pure EG is accompanied by a volume phase transition (VPT) that decreases the organogel volume compared to that of the hydrogel. Our organogel sensor systems utilize shifts in the particle spacing of an attached two-dimensional photonic crystal (2DPC) to report on the volume changes induced by protein-ligand binding. Our 2DPC bovine serum albumin (BSA) organogels exhibit VPT that swell the organogels in response to the BSA binding of charged ligands like ibuprofen and fatty acids. To our knowledge, this is the first report of a pure protein organogel VPT induced by protein-ligand binding. Catalytic protein organogels were also fabricated that utilize the enzyme organophosphorus hydrolase (OPH) to hydrolyze toxic organophosphate (OP) nerve agents. Our OPH organogels retain significant enzymatic activity. The OPH organogel rate of OP hydrolysis is ∼160 times higher than that of un-cross-linked OPH monomers in a 1:1 ethylene glycol/water mixture.

Artificial Microbial Arenas: Materials for Observing and Manipulating Microbial Consortia

From the smallest ecological niche to global scale, communities of microbial life present a major factor in system regulation and stability. As long as laboratory studies remain restricted to single or few species assemblies, however, very little is known about the interaction patterns and exogenous factors controlling the dynamics of natural microbial communities. In combination with microfluidic technologies, progress in the manufacture of functional and stimuli-responsive materials makes artificial microbial arenas accessible. As habitats for natural or multispecies synthetic consortia, they are expected to not only enable detailed investigations, but also the training and the directed evolution of microbial communities in states of balance and disturbance, or under the effects of modulated stimuli and spontaneous response triggers. Here, a perspective on how materials research will play an essential role in generating answers to the most pertinent questions of microbial engineering is presented, and the concept of adaptive microbial arenas and possibilities for their construction from particulate microniches to 3D habitats is introduced. Materials as active and tunable components at the interface of living and nonliving matter offer exciting opportunities in this field. Beyond forming the physical horizon for microbial cultivates, they will enable dedicated intervention, training, and observation of microbial consortia.

Biofouling-Resistant Porous Membranes with a Precisely Adjustable Pore Diameter via 3D Polymer Grafting

A facile route to biofouling-resistant porous thin-film membranes that can be fine-tuned for specific needs in diverse bioseparation, mass flow control, sensors, and drug delivery applications is reported. The proposed approach is based on combining two distinct macromolecular systems-a cross-linked poly(2-vinyl pyridine) network and a 3D-grafted polyethylene oxide (PEO) layer-in one robust porous material whose porosity can be adjusted within a wide range, covering the macroporous and mesoporous size regimes. Notably, this reconfigurable material maintains its antifouling properties throughout the entire range of pore size configurations because of a dense surface carpet of PEO chains with self-healing properties that are immobilized both onto the surface and inside the polymer network through what was termed 3D grafting. Experimental results are supplemented by computer simulations of a coarse-grained model of a porous membrane that shows qualitatively similar pore swelling behavior.

A Reversibly Responsive Fluorochromic Hydrogel Based on Lanthanide-Mannose Complex

Fluorochromic materials that are dynamic in response to external stimuli are of great interest for the development of advanced sensors and luminescent materials. Herein, a design based on a lanthanide-containing polymeric hydrogel possessing characteristic emission of lanthanides (Eu and Tb) and showing response to stimuli of metal ions is reported. The fluorochromic hydrogel is prepared using a lanthanide-mannose complex in gelation matrix. The lanthanide-mannose complex shows tunable fluorescent emission in response to Fe2+, due to the inhibition of the "antenna effect" between metal ions and ligands upon stimulation. The fluorescent hydrogel shows reversible "On/Off" fluorochromic response to Fe2+/ethylenediaminetetraacetic acid (EDTA). Remarkably, the fluorescent hydrogel is proven nontoxic and biocompatible; and a proof-of-application as in situ 3D cell culture extracellular matrix with reversible fluorochromic "On/Off" switch upon Fe2+/EDTA is demonstrated. This reversibly responsive fluorochromic hydrogel demonstrates a way to fabricate smart optical materials, particularly for biological-related applications where reversible response is required.

Programmed Degradation of Hydrogels with a Double-Locked Domain

The ability to control the degradation of a material is critical to various applications. The purpose of this study was to demonstrate a concept of controlling degradation by using a double-locked domain (DLD). DLDs are molecular structures with two functional units that work cooperatively under environmental stimulation. One unit is triggered to transform without cleavage in the presence of the first stimulus, but this transformation enables the activation of the other unit for cleavage in the presence of the second stimulus. A DLD is presented that is activated to transform through intramolecular reconfiguration when exposed to light. After this transformation, the light-triggered DLD can undergo rapid cleavage under acid treatment. When this DLD is used as the crosslinkers of hydrogels, hydrogels undergo rapid degradation after sequential exposure to light irradiation and acid treatment. Reversing the order of light irradiation and acid treatment or only using individual stimulation does not lead to comparable degradation. Thus, this study has successfully demonstrated the great potential of using DLDs to achieve programmable degradation of materials.

Stretchable Transparent Conductive Films from Long Carbon Nanotube Metals

Flexible transparent conductors are an enabling component for large-area flexible displays, wearable electronics, and implantable medical sensors that can wrap around and move with the body. However, conventional conductive materials decay quickly under tensile strain, posing a significant hurdle for functional flexible devices. Here, we show that high electrical conductivity, mechanical stretchability, and optical transparency can be simultaneously attained by compositing long metallic double-walled carbon nanotubes with a polydimethylsiloxane substrate. When stretched to 100% tensile strain, thin films incorporating these long nanotubes (≈3.2 µm on average) achieve a record high conductivity of 3316 S cm^-1 at 100% tensile strain and 85% optical transmittance, which is 194 times higher than that of short nanotube controls (≈0.8 µm on average). Moreover, the high conductivity can withstand more than 1000 repeated stretch-release cycles (switching between 100% and 0% strain) with a retention approaching 96%, whereas the short nanotube controls exhibit only 10%. Mechanistic studies reveal that long tubes can bridge the microscale gaps generated during stretching, thereby maintaining high electrical conductivity. When mounted on human joints, this elastic transparent conductor can accommodate large motions to provide stable, high current output. These results point to transparent conductors capable of attaining high electrical conductivity and optical transmittance under mechanical strain to allow large shape changes that may take place in the operation and use of flexible electronics.

Tunable Interfacial Properties in Silk Ionomer Microcapsules with Tailored Multilayer Interactions

Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene-glycol-grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH-responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).

Bioinspired Temperature-Responsive Multilayer Films and Their Performance under Thermal Fatigue

The structure of certain nonliving tissues determines their self-shaping and self-folding capabilities in response to a stimulus. Predetermined movements are realized according to changes in the environmental conditions due to the generated stresses of the multilayer anisotropic structure. In this study, we present bioinspired responsive anisotropic multilayer films and their fabrication process which comprises low-cost techniques. The anisotropic multilayer materials are capable of deforming their geometry caused by small temperature changes (<40 °C). The mismatch in the thermo-mechanical properties between three or more anisotropic thin layers creates responsive materials that alter their shape owing to the developed internal stresses. The movements of the material can be controlled by forming anisotropic homogenous metallic strips over an anisotropic thermoplastic layer. As a result, responsive multilayer films made of common materials can be developed to passively react to a temperature stimulus. We demonstrate the ability of the anisotropic materials to transform their geometry and we present a promising fabrication process and the thermal fatigue resistance of the developed materials. The thermal fatigue performance is strongly related to the fabrication method and the thickness of the strips. We studied the thermal fatigue performance of the materials and how the thermal cycling affects their sensitivity, as well as their failure modes and crack formation.

Light-Responsive Polymer Particles as Force Clamps for the Mechanical Unfolding of Target Molecules

Single-molecule force spectroscopy techniques are powerful tools for investigating the mechanical unfolding of biomolecules. However, they are limited in throughput and require dedicated instrumentation. Here, we report a force-generating particle that can unfold target molecules on-demand. The particle consists of a plasmonic nanorod core encapsulated with a thermoresponsive polymer shell. Optical heating of the nanorod leads to rapid collapse of the polymer, thus transducing light into mechanical work to unfold target molecules. The illumination tunes the duration and degree of particle collapse, thus controlling the lifetime and magnitude of applied forces. Single-molecule fluorescence imaging showed reproducible mechanical unfolding of DNA hairpins. We also demonstrate the triggering of 50 different particles in <1 min, exceeding the speed of conventional atomic force microscopy. The polymer force clamp represents a facile and bottom-up approach to force manipulation.

Glycan Stimulation Enables Purification of Prostate Cancer Circulating Tumor Cells on PEDOT NanoVelcro Chips for RNA Biomarker Detection

A glycan-stimulated and poly(3,4-ethylene-dioxythiophene)s (PEDOT)-based nanomaterial platform is fabricated to purify circulating tumor cells (CTCs) from blood samples of prostate cancer (PCa) patients. This new platform, phenylboronic acid (PBA)-grafted PEDOT NanoVelcro, combines the 3D PEDOT nanosubstrate, which greatly enhances CTC capturing efficiency, with a poly(EDOT-PBA-co-EDOT-EG3) interfacial layer, which not only provides high specificity for CTC capture upon antibody conjugation but also enables competitive binding of sorbitol to gently release the captured cells. CTCs purified by this PEDOT NanoVelcro chip provide well-preserved RNA transcripts for the analysis of the expression level of several PCa-specific RNA biomarkers, which may provide clinical insights into the disease.

Photoactuated Pens for Molecular Printing

The photoactuation of pen arrays made of polydimethylsiloxane carbon nanotube composites is explored, and the first demonstration of photoactuated pens for molecular printing is reported. Photoactuation of these composites is characterized using atomic force microscopy and found to produce microscale motion in response to modest illumination, with an actuation efficiency as high as 200 nm mW^-1 on the sub-1 s time scale. Arrays of composite pens are synthesized and it is found that local illumination is capable of moving selected pens by more than 3 µm out of the plane, bringing them into contact to perform controllable and high quality printing while completely shutting off the nonilluminated counterparts. In light of the scalability limitations of nanolithography, this work presents an important step and paves the way for arbitrary control of individual pens in massive arrays. As an example of a scalable soft actuator, this approach can also aid progress in other fields such as soft robotics and microfluidics.

Ultra-Fast Molecular Rotors within Porous Organic Cages

Using variable temperature 2 H static NMR spectra and 13 C spin-lattice relaxation times (T1 ), we show that two different porous organic cages with tubular architectures are ultra-fast molecular rotors. The central para-phenylene rings that frame the "windows" to the cage voids display very rapid rotational rates of the order of 1.2-8×106  Hz at 230 K with low activation energy barriers in the 12-18 kJ mol-1 range. These cages act as hosts to iodine guest molecules, which dramatically slows down the rotational rates of the phenylene groups (5-10×104  Hz at 230 K), demonstrating potential use in applications that require molecular capture and release.

Controlling the Release of Small, Bioactive Proteins via Dual Mechanisms with Therapeutic Potential

Injectable delivery systems that respond to biologically relevant stimuli present an attractive strategy for tailorable drug release. Here, the design and synthesis of unique polymers are reported for the creation of hydrogels that are formed in situ and degrade in response to clinically relevant endogenous and exogenous stimuli, specifically reducing microenvironments and externally applied light. Hydrogels are formed with polyethylene glycol and heparin-based polymers using a Michael-type addition reaction. The resulting hydrogels are investigated for the local controlled release of low molecular weight proteins (e.g., growth factors and cytokines), which are of interest for regulating various cellular functions and fates in vivo yet remain difficult to deliver. Incorporation of reduction-sensitive linkages and light-degradable linkages affords significant changes in the release profiles of fibroblast growth factor-2 (FGF-2) in the presence of the reducing agent glutathione or light, respectively. The bioactivity of the released FGF-2 is comparable to pristine FGF-2, indicating the ability of these hydrogels to retain the bioactivity of cargo molecules during encapsulation and release. Further, in vivo studies demonstrate degradation-mediated release of FGF-2. Overall, our studies demonstrate the potential of these unique stimuli-responsive chemistries for controlling the local release of low molecular weight proteins in response to clinically relevant stimuli.

Polymersomes with Rapid K+-Triggered Drug-Release Behaviors

A novel type of smart polymersomes with rapid K⁺-triggered drug-release properties is developed in this work. Block copolymers with biocompatible poly(ethylene glycol) (PEG) as the hydrophilic block and poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (PNB) copolymer as the K⁺-responsive block are successfully synthesized. Because of the presence of 18-crown-6 units, the PEG-b-PNB block copolymers exhibit excellent K⁺-dependent phase-transition behaviors, which show a hydrophilic-hydrophobic state in simulated extracellular fluid and present a hydrophilic-hydrophilic state in simulated intracellular fluid. Polymersomes with regular spherical shape and good monodispersity are prepared by the self-assembly of the PEG-b-PNB block copolymers. Both hydrophilic fluorescein isothiocyanate-dextran and hydrophobic doxorubicin are selected as model drugs and are successfully encapsulated into the PEG-b-PNB polymersomes. After being placed in a simulated intracellular fluid with high K⁺ concentration, the PEG-b-PNB polymersomes immediately disassemble accompanied by the rapid and complete release of drugs. Such K⁺-responsive polymersomes with the desired drug-release properties provide a novel strategy for advanced intracellular drug delivery and release, which can enhance the safety and efficacy of cancer therapy.

Strategic Shuffling of Clay Layers to Imbue Them with Responsiveness

Layers of naturally occurring clay minerals are rearranged to prepare highly sensitive multiresponsive clay-clay bilayer membrane (CCBM). The CCBM introduced here responds to the minuscule changes in the surrounding environments including temperature, humidity, and presence of solvent vapors by morphing in specific manners. Strips cut from CCBM exhibit up to 588 N kg^-1 force output when exposed to temperature fluctuations. Inheriting the natural stability of clay minerals, CCBM demonstrates extreme robustness, heating up to 500 °C, cooling with liquid N₂ and exposure to corrosive chemical vapors did not deteriorate its bending performance. Mechanistic studies suggest that shape transformations of CCBM are driven by the unequal response of its components to external stimuli.