Synthesis of Water-Dispersible Single-Layer CoAl-Carbonate Layered Double Hydroxide

Surface-Modified LDH Nanosheets with High Dispersibility in Oil for Friction and Wear Reduction

Surface and interfacial engineering of nanomaterials is essential for improving dispersion stability in liquids. In this study, we report that oleic acid (OA)- and stearic acid (SA)-functionalized layered double hydroxide (LDH) nanosheets as lubricant additives can achieve high dispersion and reduce friction and wear. LDH is a typical layered structure, and OA and SA are long-chain organic molecules that are not only compatible with base oils but also act as friction-reducing agents. The OA and SA molecules were branched onto ZnMgAl LDH nanosheets using dehydration condensation between the exposed OH groups on the surface of LDH and the COOH groups on the OA and SA molecules. Compared with that of the pristine ZnMgAl LDH, the dispersion of OA-ZnMgAl LDH and SA-ZnMgAl LDH was significantly improved. The surface-modified LDH exhibited superior tribological properties and great stability due to the synergistic lubrication effect between OA, SA, and LDH. Even at an ultralow concentration (0.15 wt %), the coefficient of friction and wear volume were reduced by ∼65 and ∼99%, respectively, compared to those of the base oil. Due to the green and simple synthesis method and excellent tribological properties, surface-functionalized LDH has enormous possibilities for future industrial applications.

Recent Advances on Transition-Metal-Based Layered Double Hydroxides Nanosheets for Electrocatalytic Energy Conversion

Transition-metal-based layered double hydroxides (TM-LDHs) nanosheets are promising electrocatalysts in the renewable electrochemical energy conversion system, which are regarded as alternatives to noble metal-based materials. In this review, recent advances on effective and facile strategies to rationally design TM-LDHs nanosheets as electrocatalysts, such as increasing the number of active sties, improving the utilization of active sites (atomic-scale catalysts), modulating the electron configurations, and controlling the lattice facets, are summarized and compared. Then, the utilization of these fabricated TM-LDHs nanosheets for oxygen evolution reaction, hydrogen evolution reaction, urea oxidation reaction, nitrogen reduction reaction, small molecule oxidations, and biomass derivatives upgrading is articulated through systematically discussing the corresponding fundamental design principles and reaction mechanism. Finally, the existing challenges in increasing the density of catalytically active sites and future prospects of TM-LDHs nanosheets-based electrocatalysts in each application are also commented.

Synthesis of two-Dimensional layered double hydroxide: A systematic overview

Two-dimensional (2D) layered double hydroxides (LDH) are classic materials in fundamental research and practical application. 2D LDH have unique structural features, such as high aspect ratio, high specific surface area,...

Preparation and application of layered double hydroxide nanosheets

Layered double hydroxides (LDH) with unique structure and excellent properties have been widely studied in recent years. LDH have found widespread applications in catalysts, polymer/LDH nanocomposites, anion exchange materials, supercapacitors, and fire retardants. The exfoliated LDH ultrathin nanosheets with a thickness of a few atomic layers enable a series of new opportunities in both fundamental research and applications. In this review, we mainly summarize the LDH exfoliation methods developed in recent years, the recent developments for the direct synthesis of LDH single-layer nanosheets, and the applications of LDH nanosheets in catalyzing oxygen evolution reactions, crosslinkers, supercapacitors and delivery carriers.

Layered double hydroxides (LDHs) with unique structure and excellent properties have been widely studied in recent years.

Solvothermal synthesis of carbonate-type layered double hydroxide monolayer nanosheets: Solvent selection based on characteristic parameter matching criterion

Monolayer nanosheets of CO₃^2--type layered double hydroxides (LDHs) have many special applications, but their fabrication is challenging. Herein, Co₂Al-CO₃ and Co₂Fe-CO₃ LDH nanosheets were synthesized via a solvothermal method. 31 solvents with different characteristic parameters, including the surface free energy (γ) and solubility (δ) parameters were chosen, to explore the correlation between the formation of monolayer LDHs (ML-LDHs) and the characteristic parameters of solvents. The results reveal that when the solvents used have the characteristic parameters matching to those of the LDHs, CO₃^2--type ML-LDHs with a thickness of ca. 1 nm can be obtained. The mixed-solvent strategy can provide the effective solvents for the synthesis of ML-LDHs. The dispersions of CO₃^2--type ML-LDHs can be stable for at least six months without obvious precipitation. In addition, it is demonstrated that the δ parameters of LDHs can be calculated from the γ parameters via the molar volume-free γ-δ equations developed previously. Furthermore, a new parameter called "surface free energy distance" is introduced, which can be used for screening effective solvents for the synthesis of ML-LDHs. To the best of our knowledge, this is the first time to investigate the applicable of the characteristic parameter matching principle for the bottom-up synthesis of ML-LDHs. This work deepens the understanding on the feature of CO₃^2--type LDHs and provides a solvent selection strategy for the synthesis of CO₃^2--type ML-LDHs.

Rationally designed trimetallic Prussian blue analogues on LDH/Ni foam for high performance supercapacitors

A series of PBA@NiCo-LDH/NF samples have been successfully fabricated by a facile and in situ method, and they show exciting electrochemical performance as supercapacitor electrodes with an area specific capacitance of 2004.26 mF cm⁻² at 1 mA cm⁻².

Inception of molybdate as a "pore forming additive" to enhance the bifunctional electrocatalytic activity of nickel and cobalt based mixed hydroxides for overall water splitting

Development of low-cost transition metal based electrocatalysts on inexpensive substrates for overall water splitting is essential to meet the future energy storage demand. In this article, we have synthesized a molybdate incorporated nickel cobalt hydroxide material on Cu mesh with nickel : cobalt : molybdenum in a 13.25 : 21.42 : 1 ratio and the electrode has shown excellent bifunctional electrocatalytic activity as it demonstrates overpotentials as low as 290 mV and 125 mV to reach 10 mA cm-2geo for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively (after both iR and capacitance correction). Control studies with fourteen other nickel-cobalt based hydroxides and rigorous post-catalytic analysis suggested that though molybdate was not the active catalytic centre, it played a pivotal role in enhancing the activity of the material as - (i) it significantly improved the surface area and porosity of the as-synthesized material and (ii) owing to its continuous etching during electrochemical testing, it was found to increase the accessibility of electrochemically active catalytic sites lying in the bulk. Thus, molybdate acts as a "pore forming additive" during both synthesis and electrochemical treatment. Furthermore, the combination of nickel and molybdate helped in the formation of a 2D-sheet like morphology which in turn improves accessibility to catalytically active centres. In addition, the Cu mesh substrate notably lowers the charge transfer resistance. To the best of our knowledge, this is the first ever report of molybdate as a "pore forming additive" and will enthuse the designing of electrocatalytic materials with enhanced performance based on this strategy.

Superlubricity of Polyalkylene Glycol Aqueous Solutions Enabled by Ultrathin Layered Double Hydroxide Nanosheets

It was previously proved that the existence of a large amount of hydrogen ions in water-based lubricants can easily lead to a superlubric state; however, it was also shown that these hydrogen ions could cause severe corrosion. As part of a large family of attractive clays, layered double hydroxides (LDHs) possess excellent tribological properties in water-based lubrication systems. In the present work, two different kinds of LDHs are dispersed in polyalkylene glycol (PAG) aqueous solutions, in two distinct forms: ultrathin nanosheets (ULDH-NS) of ca. 60 nm wide and ca. 1 nm thick (single or double layer) and nanoparticles (LDH-NP) of ca. 19.73 nm wide and ca. 8.68 nm thick. We find that the addition of ULDH-NS greatly shortens (as much as 85%) the running-in period prior to reaching the superlubricity regime and increases the ultimate load-bearing capacity by about four times. As compared to the fluid film thickness of the lubricating PAG solution, their ultrathin longitudinal dimension will not impair or influence the fluid film coverage in the contact zone. The analysis of sliding solid surfaces and the atomic force microscope microscale friction test demonstrate that the adsorption of ULDH-NS enables the sliding solid surfaces to be polished and protected because of their relatively weak interlayer interaction and increased adhesion effect. Owing to their superior tribological properties as lubricant additives, ultrathin LDH nanosheets hold great potential for enabling liquid superlubricity in industrial applications in the future.

Two-Dimensional Layered Double Hydroxides for Reactions of Methanation and Methane Reforming in C1 Chemistry

CH₄ as the paramount ingredient of natural gas plays an eminent role in C1 chemistry. CH₄ catalytically converted to syngas is a significant route to transmute methane into high value-added chemicals. Moreover, the CO/CO₂ methanation reaction is one of the potent technologies for CO₂ valorization and the coal-derived natural gas production process. Due to the high thermal stability and high extent of dispersion of metallic particles, two-dimensional mixed metal oxides through calcined layered double hydroxides (LDHs) precursors are considered as the suitable supports or catalysts for both the reaction of methanation and methane reforming. The LDHs displayed compositional flexibility, small crystal sizes, high surface area and excellent basic properties. In this paper, we review previous works of LDHs applied in the reaction of both methanation and methane reforming, focus on the LDH-derived catalysts, which exhibit better catalytic performance and thermal stability than conventional catalysts prepared by impregnation method and also discuss the anti-coke ability and anti-sintering ability of LDH-derived catalysts. We believe that LDH-derived catalysts are promising materials in the heterogeneous catalytic field and provide new insight for the design of advance LDH-derived catalysts worthy of future research.

Fe–N-functionalized carbon electrocatalyst derived from a zeolitic imidazolate framework for oxygen reduction: Fe and NH3 treatment effects

The amount of Fe and NH₃ treatment significantly affect the structural and catalytic properties of resulting ZIF-derived Fe–N–C catalysts.