Surfactant-Free Synthesis of Carbon-Supported Palladium Nanoparticles and Size-Dependent Hydrogen Production from Formic Acid-Formate Solution

From single atoms to nanoparticles: size effect on Pd/C-catalyzed hydrogenation of 2,5-furandicarboxylic acid

In this study, five catalysts with Pd particle sizes ranging from single atoms to nanoclusters and nanoparticles were synthesized by controlling the Pd loading amount and preparation methods, and applied in the hydrogenation of FDCA to THFDCA. Furthermore, kinetic models were established. Notably, the nanocluster catalyst demonstrated relatively high hydrogenation activity.

Efficient hydrogen production from formic acid dehydrogenation over ultrasmall PdIr nanoparticles on amine-functionalized yolk-shell mesoporous silica

Developing heterogeneous catalysts with exceptional catalytic activity over formic acid (HCOOH, FA) dehydrogenation is imperative to employ FA as an effective hydrogen (H2) carrier. In this work, ultrasmall (1.4 nm) and well-dispersed PdIr nanoparticles (NPs) immobilized on amine-functionalized yolk-shell mesoporous silica nanospheres (YSMSNs) with radially oriented mesoporous channels have been synthesized by a co-reduction strategy. The optimized catalyst Pd4Ir1/YSMSNs-NH2 (Pd/Ir molar ratio = 4:1) exhibited a remarkable turnover frequency (TOF) of 5818 h-1 and remarkable stability at 50 °C with the addition of sodium formate (SF), resulting in complete FA conversion and H2 selectivity, exceeding most of the solid heterogeneous catalysts in previous reports under similar circumstances. Kinetic isotope effect (KIE) exploration indicates the cleavage of the CH bond is regarded as the rate-determining step (RDS) during the FA dehydrogenation process. Such excellent catalytic properties arise from the ultrafine and well-dispersed PdIr NPs supported on the nanosphere support YSMSNs-NH2, the electronic synergistic effect of PdIr alloy NPs, and the strong metal-support interaction (MSI) effect between the introduced PdIr NPs and YSMSNs-NH2 support. This work offers a new paradigm for exploiting the highly effective silica-supported Pd-based heterogeneous catalysts over the dehydrogenation of FA.

Disentangling heterogeneous thermocatalytic formic acid dehydrogenation from an electrochemical perspective

Heterogeneous thermocatalysis of formic acid dehydrogenation by metals in solution is of great importance for chemical storage and production of hydrogen. Insightful understanding of the complicated formic acid dehydrogenation kinetics at the metal-solution interface is challenging and yet essential for the design of efficient heterogeneous formic acid dehydrogenation systems. In this work, formic acid dehydrogenation kinetics is initially studied from a perspective of electrochemistry by decoupling this reaction on Pd catalyst into two short-circuit half reactions, formic acid oxidation reaction and hydrogen evolution reaction and manipulating the electrical double layer impact from the solution side. The pH-dependences of formic acid dehydrogenation kinetics and the associated cation effect are attributed to the induced change of electric double layer structure and potential by means of electrochemical measurements involving kinetic isotope effect, in situ infrared spectroscopy as well as grand canonical quantum mechanics calculations. This work showcases how kinetic puzzles on some important heterogeneous catalytic reactions can be tackled by electrochemical theories and methodologies.

New Approach to Synthesizing Cathode PtCo/C Catalysts for Low-Temperature Fuel Cells

The presented study is concerned with a new multi-step method to synthesize PtCo/C materials based on composite CoxOy/C that combines the advantages of different liquid-phase synthesis methods. Based on the results of studying the materials at each stage of synthesis with the TG, XRD, TEM, SEI, TXRF, CV and LSV methods, a detailed overview of the sequential changes in catalyst composition and structure at each stage of the synthesis is presented. The PtCo/C catalyst synthesized with the multi-step method is characterized by a uniform distribution of bimetallic nanoparticles of about 3 nm in size over the surface of the support, which result in its high ESA and ORR activity. The activity study for the synthesized PtCo/C catalyst in an MEA showed better current-voltage characteristics and a higher maximum specific power compared with an MEA based on a commercial Pt/C catalyst. Therefore, the results of the presented study demonstrate high prospects for the developed approach to the multi-step synthesis of PtM/C catalysts, which may enhance the characteristics of proton-exchange membrane fuel cells (PEMFCs).

Carbon-coated silica supported palladium for hydrogen production from formic acid - Exploring the influence of strong metal support interaction

Hydrogen energy is one of the most promising energy carriers to solve the increasingly severe energy crisis. Formic acid decomposition (FAD) solves the storage and transportation problems of hydrogen gas since hydrogen can be produced from aqueous formic acid under mild conditions. To efficiently convert formic acid to hydrogen gas, chemical and structural modification of Pd nanoparticles or supports have been carried out, especially introducing the strong metal support interaction (SMSI). Herein, we synthesized core-shell structured SiO2@SC compounds as the supports to introduce SMIS to Pd/PdO nanoparticles. The relationship between FAD activity and SMSI is investigated. The SMSI between Pd/PdO nanoparticles and SiO2/SC is adjusted by altering the thickness of the carbon layer. The X-ray photoelectron spectroscopy shows that owing to the strong electron-attracting ability SiO2 core contributes to leading the Pd0 active site in an electron-deficient state. The thickness of the carbon layer controls the ratio of Pd0/PdO, which enhances the anti-poisoning ability of the catalyst. Owing to the electron-deficient state of Pd0 and optimal ratio of Pd0/PdO, the hydrogen desorption rate of FAD on Pd is enhanced, and the turn over frequency of Pd/SiO2@SC-1:3 catalyst reaches 1138 h-1, which is ten times higher than that of the pristine Pd/SC catalyst. These results are believed to guide the design and development of highly active Pd-based catalysts for hydrogen generation via FAD.

Nickel -supported PdM (M = Au and Ag) nanodendrites as formate oxidation (electro)catalytic anodes for direct fuel cells and hydrogen generation at room temperature

The study provides a proof of concept for the first time that unique palladium-gold (PdAu) and palladium-silver (PdAg) nanodendrites are bifunctional catalytic active sites for formate oxidation reactions (FORs) and formate dehydrogenation reactions (FDRs). The unique nanodendritic structure was developed via a simple galvanic displacement reaction for the direct growth of PdAu and PdAg nanodendrites on a nickel foam (PdAu/NiNF and PdAg/NiNF). These PdAu/NiNF and PdAg/NiNF electrodes exhibited 2.32 and 1.59 times higher specific activity than that of the commercial Pd/C electrode and promising stability toward FORs. Moreover, the PdAu/NiNF and PdAg/NiNF nanodendrites were also highly active and selective catalysts for hydrogen generation from a formate solution with turnover frequency (TOF) values of 311 h^-1 and 287 h^-1 respectively. Impressively, a passive air-breathing formate fuel cell with PdAu/NiNF used as an anode can yield an open-circuit voltage of 1.12 V and a peak power density of 21.7 mW cm^-2, which outperforms most others reported in the literature. PdAu and PdAg nanodendritic catalysts supported on a nickel foam demonstrate an open structure and uniform catalyst distribution and offer a promising nanoalloy for air-breathing formate fuel cells and on-site chemical hydrogen production systems.

Amine-Functionalized Natural Halloysite Nanotubes Supported Metallic (Pd, Au, Ag) Nanoparticles and Their Catalytic Performance for Dehydrogenation of Formic Acid

In today’s age of resource scarcity, the low-cost development and utilization of renewable energy, e.g., hydrogen energy, have attracted much attention in the world. In this work, cheap natural halloysite nanotubes (HNTs) were modified with γ-aminopropyltriethoxysilane (APTES), and the functionalized HNTs were used as to support metal (Pd, Au, Ag) catalysts for dehydrogenation of formic acid (DFA). The supports and fabricated catalysts were characterized with ICP, FT-IR, XRD, XPS and TEM. The functional groups facilitate the anchoring of metal particles to the supports, which brings about the high dispersion of metallic particles in catalysts. The catalysts show high activity against DFA and exhibit selectivity of 100% toward H2 at room temperature or less. The interactions between active centers and supports were investigated by evaluation and comparison of the catalytic performances of Pd/NH2-HNTs, PdAg/NH2-HNTs and PdAu/NH2-HNTs for DFA.

Preparation Strategy Using Pre-Nucleation Coupled with In Situ Reduction for a High-Performance Catalyst towards Selective Hydrogen Production from Formic Acid

Formic acid decomposition (FAD) is one of the most promising routes for rapid hydrogen (H2) production. Extensive efforts have been taken to develop efficient catalysts, which calls for the simultaneous regulation of the electronic structure and particle size of the catalyst. The former factor determines the intrinsic performance, while the latter corresponds to the active site utilization. Here, an effective preparation strategy, pre-nucleation coupled with in situ reduction, is developed to realize and well-tune both surface electronic states and particle size of the pallidum (Pd) catalyst. Benefiting from the structural merits, the as-prepared catalyst exhibits high mass-specific activity of 8.94 molH2/(gPd·h) with few carbon monoxide (CO) molecules, and the activation energy could reach a value as small as 33.1 kJ/mol. The work not only affords a highly competitive FAD catalyst but also paves a new avenue to the synthesis of ultra-fine metal nanoparticles with tailorable electronic structures.

Gram-Scale Synthesis of CoO/C as Base for PtCo/C High-Performance Catalysts for the Oxygen Reduction Reaction

The composition, structure, catalytic activity in the ORR and stability of PtCo/C materials, obtained in two stages and compared with commercial Pt/C analogs, were studied. At the first stage of the synthesis performed by electrodeposition of cobalt on a carbon support, a CoOx/C composite containing 8% and 25 wt% cobalt oxide was successfully obtained. In the second step, PtCoOx/C catalysts of Pt1.56Co and Pt1.12Co composition containing 14 and 30 wt% Pt, respectively, were synthesized based on the previously obtained composites. According to the results of the composition and structure analysis of the obtained PtCoOx/C catalysts by X-ray diffraction (XRD), X-ray fluorescence analysis (XRF), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) methods, the formation of small bimetallic nanoparticles on the carbon support surface has been proved. The resulting catalysts demonstrated up to two times higher specific catalytic activity in the ORR and high stability compared to commercial Pt/C analogs.

H2 Production from Formic Acid Using Highly Stable Carbon-Supported Pd-Based Catalysts Derived from Soft-Biomass Residues: Effect of Heat Treatment and Functionalization of the Carbon Support

The production of hydrogen from liquid organic hydrogen carrier molecules stands up as a promising option over the conventional hydrogen storage methods. In this study, we explore the potential of formic acid as a convenient hydrogen carrier. For that, soft-biomass-derived carbon-supported Pd catalysts were synthesized by a H₃PO₄-assisted hydrothermal carbonization method. To assess the impact of the properties of the support in the catalytic performance towards the dehydrogenation of formic acid, three different strategies were employed: (i) incorporation of nitrogen functional groups; (ii) modification of the surface chemistry by performing a thermal treatment at high temperatures (i.e., 900 °C); and (iii) combination on both thermal treatment and nitrogen functionalization. It was observed that the modification of the carbon support with these strategies resulted in catalysts with enhanced performance and outstanding stability even after six consecutive reaction cycles, thus highlighting the important effect of tailoring the properties of the support.

Controllable Synthesis of Supported PdAu Nanoclusters and Their Electronic Structure-Dependent Catalytic Activity in Selective Dehydrogenation of Formic Acid

We report the design and synthesis of uniform PdAu alloy nanoclusters immobilized on diamine and graphene oxide-functionalized silica nanospheres. The structure-dependent activity for selectively catalytic dehydrogenation of formic acid (FA) has been evaluated and optimized by controlling the Pd/Au mole ratio and the carrier components. The relationship between the catalyst structure and activity has been investigated via both experiments and characterization. High-resolution transmission electron microscopy (TEM) and X-ray diffraction (XRD) proved the formation of PdAu alloy nanoclusters. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS) analyses verified the electron transfer between Au, Pd, and the support. An outstanding turnover frequency (TOF) value of 16 647 h^-1 at 323 K, which is among the highest activity for FA dehydrogenation ever reported, can be achieved at optimized conditions and ascribed to the combination of the bimetallic synergistic effect and the carrier effect.

Cavitation intensifying bags improve ultrasonic advanced oxidation with Pd/Al2O3 catalyst

Advanced oxidation processes can potentially eliminate organic contaminants from industrial waste streams as well as persistent pharmaceutical components in drinking water. We explore for the first time the utilization of Cavitation Intensifying Bags (CIB) in combination with Pd/Al2O3 catalyst as possible advanced oxidation technology for wastewater streams, oxidizing terephthalic acid (TA) to 2-hydroxyterephthalic acid (HTA). The detailed characterization of this novel reaction system reveals that, during sonication, the presence of surface pits of the CIB improves the reproducibility and thus the control of the sonication process, when compared to oxidation in non-pitted bags. Detailed reaction kinetics shows that in the CIB reactor the reaction order to TA is zero, which is attributed to the large excess of TA in the system. The rate of HTA formation increased ten-fold from ~0.01 μM*min-1 during sonication in the CIB, to ~0.10 μM*min-1 for CIB in the presence of the Pd/Al2O3 catalyst. This enhancement was ascribed to a combination of improved mass transport, the creation of thermal gradients, and Pd/Al2O3 catalyst near the cavitating bubbles. Further analysis of the kinetics of HTA formation on Pd/Al2O3 indicated that initially the reaction underwent through an induction period of 20 min, where the HTA concentration was ~0.3 μM. After this, the reaction rate increased reaching HTA concentrations ~6 μM after 40 min. This behavior resembled that observed during oxidation of hydrocarbons on metal catalysts, where the slow rate formation of hydroperoxides on the metal surface is followed by rapid product formation upon reaching a critical concentration. Finally, a global analysis using the Intensification Factor (IF) reveals that CIB in combination with the Pd/Al2O3 catalyst is a desirable option for the oxidation of TA when considering increased oxidation rates and costs.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Electrochemical coupling halobenzene into biphenyl on a reusable Pd nanoparticle-coated carbon-paper electrode at ambient conditions

Electrochemical homo-coupling halobenzene into biphenyl compounds on the Pd/C surface.

Toward Overcoming the Challenges in the Comparison of Different Pd Nanocatalysts: Case Study of the Ethanol Oxidation Reaction

Precious metal nanoparticles, in particular palladium nanomaterials, show excellent catalytic properties and are key in the development of energy systems. For instance, ethanol fuel cells are promising devices for sustainable energy conversion, where Pd-based catalysts are key catalysts for the related ethanol oxidation reaction (EOR). Pd is a limited resource; thus, a remaining challenge is the development of efficient and stable Pd-based catalysts. This calls for a deeper understanding of the Pd properties at the nanoscale. This knowledge can be gained in comparative studies of different Pd nanomaterials. However, such studies remain challenging to perform and interpret due to the lack of cross-studies using the same Pd nanomaterials as a reference. Here, as-prepared sub 3 nm diameter surfactant-free Pd nanoparticles supported on carbon are obtained by a simple approach. The as-prepared catalysts with Pd loading 10 and 30 wt % show higher activity and stability compared to commercially available counterparts for the EOR. Upon electrochemical testing, a significant size increase and loss of electrochemical active surface are observed for the as-prepared catalysts, whereas the commercial samples show an increase in the electrochemically active surface area and moderate size increase. This study shines light on the challenging comparison of different catalysts across the literature. Further advancement in Pd (electro)catalyst design will gain from including self-prepared catalysts. The simple synthesis detailed easily leads to suitable nanoparticles to be used as a reference for more systematic comparative studies of Pd catalysts across the literature.

Anchoring IrPdAu Nanoparticles on NH2-SBA-15 for Fast Hydrogen Production from Formic Acid at Room Temperature

Hydrogen (H₂), a regenerable and promising energy carrier, acts as an essential role in the construction of a sustainable energy system. Formic acid (HCOOH, FA), a natural biological metabolic products and also accessible through carbon dioxide (CO₂) reduction, has a great potential to serve as a prospective H₂ supplier for the fuel cell. Herein, ultrafine and electron-rich IrPdAu alloy nanoparticles with a size of 1.4 nm are highly dispersed on amine-modified mesoporous SiO₂ (NH₂-SBA-15) and used as a highly active and selective catalyst for fast H₂ production from FA. The as-synthesized IrPdAu/NH₂-SBA-15 possesses superior catalytic activity and 100% H₂ selectivity with initial turnover frequency values of 6316 h^-1 with the additive of sodium formate (SF) and 4737 h^-1 even without SF at 298 K, comparable to the most effective heterogeneous catalysts ever published. The excellent performance of IrPdAu/NH₂-SBA-15 was not only ascribed to the combination of the electronic synergistic effect of trimetallic alloys and the strong metal-support interaction effect but also attributed to the amine (-NH₂) alkaline groups grafted on SBA-15, which is beneficial to boost the split of the O-H bond of FA.

An amine-functionalized mesoporous silica-supported PdIr catalyst: boosting room-temperature hydrogen generation from formic acid

PdIr/SBA-15-NH₂ nanocomposites were synthesized via a facile surface functionalization and co-reduction method and used as a superior catalyst for complete and fast dehydrogenation of formic acid at room temperature.

Towards high-performance heterogeneous palladium nanoparticle catalysts for sustainable liquid-phase reactions

A walk-through of nanoparticle–reactant/product, nanoparticle–support and support–reactant/product interaction effects on the catalytic performance of heterogeneous palladium catalysts in liquid-phase reactions.

Pd-CNT-SiO2 nanoskein: composite structure design for formic acid dehydrogenation

High energy density and low toxicity of formic acid makes it a promising hydrogen energy carrier. Here we report a Pd/CNT-based formic acid dehydrogenation catalyst that shows a significant decrease in the apparent activation energy compared to benchmark Pd catalysts and provide a mechanistic insight into its catalytic performance.

Superior activity of Pd nanoparticles confined in carbon nanotubes for hydrogen production from formic acid decomposition at ambient temperature

Designing highly efficient and low-cost catalysts is essential toward realizing the practical application of hydrogen generation by formic acid decomposition (FAD) under ambient conditions. Herein, we report the synthesis of a hybrid material of Pd nanoparticles encapsulated within carbon nanotubes (CNTs) (Pd-CNTs-in). Transmission electron microscopy images show that most Pd nanoparticles (mean diameter 4.2 ± 0.8 nm) are located inside the nanotubes. Temperature-programmed reduction studies of H₂ reveal that the average reduction temperature of the Pd(II) species adsorbed on the interior wall of the CNTs is 12 °C lower than those adsorbed on the outer walls of the CNT. Moreover, the as-prepared Pd-CNTs-in catalysts show extremely high FAD activity and durability at ambient temperature. The turn over frequency (TOF) value is as high as 1135 h^-1 for the initial 10 min and does not decay significantly during the consecutive 3-time recycling studies. X-Ray photoelectron spectroscopy (XPS), surface-enhanced infrared spectroscopy (SEIRAS), and gas chromatography (GC) studies indicate that CNT confinement induced electronic structure modulation of Pd could be the major reason for the enhancement of FAD catalysis on the Pd-CNTs-in surface. This work could provide promising strategies for the fabrication of cost-effective and high-active Pd-based catalysts for formic acid dehydrogenation.

Synergistic Activation of Palladium Nanoparticles by Polyoxometalate-Attached Melem for Boosting Formic Acid Dehydrogenation Efficiency

Pd nanoparticles (NPs) anchored on a phosphotungstic acid attached melem porous hybrid (PW/melem) were prepared by hybridization of phosphotungstic acid Pd salt and melem, followed by chemical reduction. PW/melem was demonstrated to be an outstanding support that can stabilize and disperse small Pd NPs (2 nm), and significantly boost their efficiency for H₂ generation from the dehydrogenation of formic acid (FA). Experimental results and mechanistic investigations indicate that a strong electronic interaction exists between Pd NPs and the PW anions; the PW anions accept electrons from Pd first and, during FA dehydrogenation, the reduced blue PW donates electrons to Pd. Moreover, melem plays an important role in hydrogen transfer and can accelerate H₂ generation. The overall synergistic effect of PW and melem endows Pd NPs with extremely high activity and stability for complete FA conversion at 50 °C, achieving a high turnover frequency of 15 393 h^-1 .

Size effect studies in catalysis: a simple surfactant-free synthesis of sub 3 nm Pd nanocatalysts supported on carbon

Supported Pd nanoparticles are prepared under ambient conditions via a surfactant-free synthesis. Pd(NO₃)₂ is reduced in the presence of a carbon support in alkaline methanol to obtain sub 3 nm nanoparticles. The preparation method is relevant to the study of size effects in catalytic reactions like ethanol electro-oxidation.

A simple surfactant-free synthesis of sub 3 nm carbon-supported Pd nanocatalysts is introduced to study size effects in catalysis.

Green Synthesis of Fluorescent Palladium Nanoclusters

Metal nanoclusters, with dimensions between atomic and nanoparticles, have attracted a great deal of attention due to their significantly unusual properties. Water-soluble palladium nanoclusters (Pd NCs) with blue-green fluorescence were synthesized by a water bath heating method, with methionine as a stabilizer and ascorbic acid as a reducing agent. We investigated the optimal synthesis conditions, stability, and pH response of the obtained products in detail. The synthesized materials were characterized by ultraviolet-absorption spectroscopy, fluorescence spectroscopy, high-resolution transmission electron microscopy, and atomic force microscopy. These experimental results showed that the Pd NCs had a small size of ~1.91 nm, with a uniform size distribution. Additionally, the Pd NCs emitted blue-green fluorescence under ultraviolet light with a quantum yield of 5.47%. Notably, both stabilizers and reducing agents used in this synthesis method are nutrients for humans, non-toxic, and harmless. This method could be viewed as a biologically friendly and green way of preparing fluorescent metal nanoclusters. The as-prepared fluorescent Pd NCs also possessed excellent fluorescence detection ability and were very sensitive to low concentrations of hemoglobin, with a linear response in the range of 0.25–3.5 μM and a detection limit of 50 nM.

Investigation on the enhanced catalytic activity of a Ni-promoted Pd/C catalyst for formic acid dehydrogenation: effects of preparation methods and Ni/Pd ratios

In this present work, we studied the effects of preparation methods and Ni/Pd ratios on the catalytic activity of a Ni-promoted Pd/C catalyst for the formic acid dehydrogenation (FAD) reaction. Two catalysts prepared by co-impregnation and sequential impregnation methods showed completely different Pd states and catalytic activities. As the sequentially impregnated catalyst showed better activity than the co-impregnated catalyst, the sequentially impregnated catalyst was investigated further to optimize the ratio of Ni/Pd. The highest catalytic activity for the FAD reaction was obtained over the seq-impregnated catalyst having a 1 : 1.3 molar ratio of Pd : Ni. The results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) showed that small particle size is one factor improving the catalytic activity, while those of X-ray photoelectron spectroscopy (XPS) and X-ray adsorption near edge structure (XANES) indicate that the electronic modification of Pd to a positively charged ion is another factor. Thus, it can be concluded that the enhanced catalytic activity of the Ni-promoted Pd/C catalyst is attributed to the role of pre-impregnated Ni in facilitating the activity of Pd by constraining the particle growth and withdrawing an electron from Pd.

In this present work, we studied the effects of preparation methods and Ni/Pd ratios on the catalytic activity of a Ni-promoted Pd/C catalyst for the formic acid dehydrogenation (FAD) reaction.