Atomic-Thick PtNi Nanowires Assembled on Graphene for High-Sensitivity Extracellular Hydrogen Peroxide Sensors

Co-presence of PtNi nanowires and ionic liquid in carbon mesopores enhances electrocatalytic oxygen reduction activity

The electrocatalytic activity of PtNi nanowires is enhanced by the co-presence of ionic liquid in carbon mesopores. Three-dimensional transmission electron microscopy tomography and surface-enhanced infrared absorption spectroscopy confirm the co-presence of PtNi nanowires and ionic liquid inside carbon mesopores even under electrochemical conditions.

Controllable assembly of three-dimensional porous graphene-Au dual aerogels and its application for high-efficient bioelectrocatalytic O2 reduction

Aerogels derived from the colloidal nanoparticles featured with hierarchical interconnected pore-rich networks guarantee their great potentials in various applications. Herein, the controllable assembly of three-dimensional aerogels based on Au nanoparticles (Au NPs) and reduced graphene oxide (rGO) nanosheets as building blocks via a bottom-up approach have been systematically clarified. The difference of building blocks and their assembly sequence were crucially to the final aerogel morphologies and electrochemical properties. Specifically, the highly porous graphene-gold dual aerogels (rGO-Au DAGs) with interconnected rGO nanosheets and Au nanowires showed high conductivity, large surface area and good biocompatibility. Thus, it was employed as an excellent matrix to immobilize enzyme for high-efficient bioelectrocatalysis. Taking bilirubin oxidase as an example, a more positive on-set potential (0.60 V) and a larger catalytic current density (0.77 mA cm^-2@0.40 V) than those of other rGO-Au assemblies were achieved for direct bioelectrocatalytic O₂ reduction. This study will provide an efficient strategy for unique dual-structural aerogels design and shed light to develop new functional materials for bioelectrocatalytic applications such as biosensors and biofuel cells.

Nonenzymatic Sweat Wearable Uric Acid Sensor Based on N-Doped Reduced Graphene Oxide/Au Dual Aerogels

Sweat wearable sensors enable noninvasive and real-time metabolite monitoring in human health management but lack accuracy and wearable applicability. The rational design of sensing electrode materials will be critical yet challenging. Herein, we report a dual aerogel-based nonenzymatic wearable sensor for the sensitive and selective detection of uric acid (UA) in human sweat. The three-dimensional porous dual-structural aerogels composed of Au nanowires and N-doped graphene nanosheets (noted as N-rGO/Au DAs) provide a large active surface, abundant access to the target, rapid electron transfer pathways, and a high intrinsic activity. Thus, a direct UA electro-oxidation is demonstrated at the N-rGO/Au DAs with a much higher activity than those at the individual gels (i.e., Au and N-rGO). Moreover, the resulting sensing chip displays high performance with a good anti-interfering ability, long-term stability, and excellent flexibility toward the UA detection. With the assistance of a wireless circuit, a wearable sensor is successfully applied in the real-time UA monitoring on human skin. The obtained result is comparable to that evaluated by high-performance liquid chromatography. This dual aerogel-based nonenzymatic biosensing platform not only holds considerable promise for the reliable sweat metabolite monitoring but also opens an avenue for metal-based aerogels as flexible electrodes in wearable sensing.

Recent progress on the synthesis of metal alloy nanowires as electrocatalysts

Benefiting from both one-dimensional (1D) morphology and alloy composition, metal alloy nanowires have been exploited as advanced electrocatalysts in various electrochemical processes. In this review, the synthesis approaches for metal alloy nanowires are classified into two categories: direct syntheses and syntheses based on preformed 1D nanostructures. Ligand systems that are of critical importance to the formation of alloy nanowires are summarized and reviewed, together with the strategies imposed to achieve the co-reduction of different metals. Meanwhile, different scenarios that form alloy nanowires from pre-synthesized 1D nanostructures are compared and contrasted. In addition, the characterization and electrocatalytic applications of metal alloy nanowires are briefly discussed.

Pt–Pd Bimetallic Aerogel as High-Performance Electrocatalyst for Nonenzymatic Detection of Hydrogen Peroxide

Hydrogen peroxide (H2O2) plays an indispensable role in the biological, medical, and chemical fields. The development of an effective H2O2 detecting method is of great importance. In the present work, a series of PtxPdy bimetallic aerogels and Pt, Pd monometallic aerogels were controllably synthesized by one-step gelation method. Their morphologies and compositions were characterized by transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and so forth. These aerogels were used as nonenzyme electrocatalysts for the detection of H2O2. The cyclic voltammetric and amperometric results demonstrated that the performance of the metal aerogels showed volcano-type behavior, with the Pt50Pd50 aerogel sitting on top. The Pt50Pd50 aerogel-based electrochemical sensor exhibited excellent comprehensive performance, with a low overpotential of −0.023 V vs. Ag/AgCl, a broad linear range from 5.1 to 3190 μM (R2 = 0.9980), and a high sensitivity of 0.19 mA mM−1 cm−2, in combination with good anti-interference ability and stability. A comprehensive study indicated that the superior sensing performance of the Pt50Pd50 aerogel is closely related to its optimized d-band center and larger cumulative pore volume. This work first applied Pt–Pd bimetallic aerogels into the detection of H2O2 and shows the promising application of noble metal aerogels in the electrochemical sensing area.

Electrodes and electrocatalysts for electrochemical hydrogen peroxide sensors: a review of design strategies

H₂O₂ sensing is required in various biological and industrial applications, for which electrochemical sensing is a promising choice among various sensing technologies. Electrodes and electrocatalysts strongly influence the performance of electrochemical H₂O₂ sensors. Significant efforts have been devoted to electrode nanostructural designs and nanomaterial-based electrocatalysts. Here, we review the design strategies for electrodes and electrocatalysts used in electrochemical H₂O₂ sensors. We first summarize electrodes in different structures, including rotation disc electrodes, freestanding electrodes, all-in-one electrodes, and representative commercial H₂O₂ probes. Next, we discuss the design strategies used in recent studies to increase the number of active sites and intrinsic activities of electrocatalysts for H₂O₂ redox reactions, including nanoscale pore structuring, conductive supports, reducing the catalyst size, alloying, doping, and tuning the crystal facets. Finally, we provide our perspectives on the future research directions in creating nanoscale structures and nanomaterials to enable advanced electrochemical H₂O₂ sensors in practical applications.

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H2 generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (ΓNi ) and Pt (ΓPt ) were calculated from electrochemical measurements; the ΓPt /ΓNi ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A gPt -1 , which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.

Facile preparation of urchin-like NiCo2O4 microspheres for efficient hydrogen peroxide detection

The fabricated NiCo2O4 microspheres acted as excellent sensors for H2O2, with much better performance than the reported NiCo2O4-based H2O2 sensors.

A Non-enzymatic Hydrogen Peroxide Sensor with Enhanced Sensitivity Based on Pt Nanoparticles

The non-enzymatic electrochemical sensing platform for hydrogen peroxide by using Pt-based nanoparticle was investigated. The characterization of PtNiCo-NPs was done by XRD, TEM, HRTEM, EDS, and XPS. A simple drop-casting technique was used to fabricate the nanomaterial on FTO electrode. The amperometric and cyclic voltammetric results illustrated that PtNiCo-NPs on FTO had excellent electrochemical performance over other mono or bimetallic materials. The catalytic performance for H₂O₂ sensing based on PtNiCo-NPs possessed a wide linear range from 5 μM to 16.5 mM with a low detection limit of 0.37 μM and a good sensitivity of 1374.4 μA mM^-1 cm^-2 at a scan rate of 20 mV s^-1 (vs. Ag/AgCl). This work presents a new way to produce a ternary nanomaterial for H₂O₂ sensing with excellent electrochemical performance. In addition, the fabricated nanomaterial showed no interferences for common interfering agents, which indicates the high specificity of the sensor. The PtNiCo-NPs have excellent stability and good reproducibility in real samples.

In situ hierarchical encapsulation of bimetallic selenides into honeycomb-like nitrogen doped porous carbon nanosheets for highly sensitive and selective guanosine detection

An innovative electrochemical nanocomposite for the detection of guanosine (Gua) was proposed by in situ encapsulation of nickel-iron bimetallic selenides confined into honeycomb-like nitrogen doped porous carbon nanosheets, denoted as (Ni,Fe)Se₂/N-PCNs. The porous carbon nanosheets were prepared by utilizing nickel-iron layered double hydroxide (Ni-Fe LDH) as the substrate and zeolitic imidazolate frameworks (ZIF-67) nanocrystals as the sacrificial templates via hydrothermal synthesis, followed by a process of acid etching and pyrolysis selenylation. Interestingly, the nickel-ferric bimetallic selenides material (Ni,Fe)Se₂, is rarely fabricated successfully using selenylation treatment, which is a highly conductive and robust support to promote the electron transport. Meanwhile, the obtained (Ni,Fe)Se₂/N-PCNs have the favorable architectural features of both unique three-dimensional (3D) porous structural and hierarchical connectivity, which are expected to provide more active sites for electrochemical reactions and ease of electron, ion, and biomolecule penetration. Benefiting from the inherent virtues of its composition, together with unique structural advantages, the (Ni,Fe)Se₂/N-PCNs possess ideal sensing properties for guanosine detection with a low detection limit of 1.20 × 10^-8 M, a wide linear range of 5.30 × 10^-8 ~ 2.27 × 10^-4 M and a good stability. Superb selectivity for potential interfering species and superb recoveries in serum suggests its feasibility for practical applications.

Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

Synergetic enhancement of electrochemical H2O2 detection in a nitrogen-doped carbon encapsulated FeCo alloy architecture

The development of Earth-abundant metal-based non-enzymatic electrodes with ultralow metal loadings for the efficient detection of hydrogen peroxide (H₂O₂) is highly desirable. We report here a remarkable three-dimensional nitrogen-doped porous carbon (NPC) encapsulated Earth-abundant metal architecture, i.e., NPC encapsulating FeCo alloy nanoparticles toward highly efficient electrochemical H₂O₂ detection. Specifically, an Fe_0.06Co_0.04@NPC-950 modified electrode can show excellent electrochemical performance for non-enzymatic H₂O₂ sensing in neutral media, with a wide linear range of 0.004 to 8 mM, a high sensitivity of 794 μA mA^-1 cm^-2 and a low limit of detection (LOD) of 0.13 μM, outperforming most of the reported non-noble metal electrocatalysts. Meanwhile, the fabricated Fe_0.06Co_0.04@NPC-950 modified electrode is capable of real-time monitoring of H₂O₂ in commercial orange juice, milk and serum, revealing its application potential toward the accurate detection of H₂O₂ in real-sample analysis. This electrode also has high selectivity, long-term stability and good reproducibility. Its excellent performance is correlated with the synergetic catalysis of the FeCo alloy, nitrogen-rich NPC with a large specific surface area (SSA) and the core-shell structure protecting the active sites from corrosion. This study offers an efficient pathway for developing high-performance and Earth-abundant catalysts toward electrochemical H₂O₂ detection.

Graphene and Perovskite-Based Nanocomposite for Both Electrochemical and Gas Sensor Applications: An Overview

Perovskite and graphene-based nanocomposites have attracted much attention and been proven as promising candidates for both gas (H₂S and NH₃) and electrochemical (H₂O₂, CH₃OH and glucose) sensor applications. In this review, the development of portable sensor devices on the sensitivity, selectivity, cost effectiveness, and electrode stability of chemical and electrochemical applications is summarized. The authors are mainly focused on the common analytes in gas sensors such as hydrogen sulfide, ammonia, and electrochemical sensors including non-enzymatic glucose, hydrazine, dopamine, and hydrogen peroxide. Finally, the article also addressed the stability of composite performance and outlined recent strategies for future sensor perspectives.

2D materials in electrochemical sensors for in vitro or in vivo use

Individual cells and cell populations are at the present time investigated with a myriad of analytical tools. While most of them are commercially available, some of these analytical tools are just emerging from research laboratories and are in the developmental phase. Electrochemical sensors which allow the monitoring of low molecular weight compounds released (and / or uptaken) by cells are among these emerging tools. Such sensors are increasingly built using 2D materials (e.g. graphene-based materials, transition metal dichalcogenides, etc.) with the aim of conferring better analytical performances to these devices. The present work critically reviews studies published during the last 10 years describing electrochemical sensors made with 2D materials and exploited to monitor small compounds (e.g. H₂O₂, ·NO, glucose, etc.) in living biological systems. It also discusses the very few 2D material-based electrochemical sensors which are wearable or usable in vivo. Finally, the present work includes a specific section about 2D material biocompatibility, a fundamental requirement for 2D material-based sensor applications in vitro and in vivo. As such, the review provides a critical view on the state of the art of electrochemical sensors made with 2D materials and used at cellular level and it evaluates the possibility that such sensors will be used on / in the human body on a wider scale.

A Novel Ratiometric Cationic Iridium(III) Complex Phosphorescent Probe for Hydrogen Peroxide

A novel cationic iridium(III) complex phosphorescent probe (Ir-BE) containing aromatic boronate ester moiety as recognition unit was designed and synthesized. The probe exhibits ratiometric emission variations (I₄₉₀/I₅₅₀) with the color change from yellow to green only toward H₂O₂ with a broad pH range of 4 - 13. Different from other aromatic boronate-based probes, Ir-BE possesses larger Stokes shift (320 nm) and exhibits good linear correlation (R² = 0.998) between the emission ratio (I₄₉₀/I₅₅₀) and the H₂O₂ concentration in a range of 0 - 300 μM. The detection limit was as low as 0.21 μM. Furthermore, the real water sample studied further proved Ir-BE has excellent selectivity for the quantitative detection of H₂O₂.

Cobalt Nanoparticles and Atomic Sites in Nitrogen-Doped Carbon Frameworks for Highly Sensitive Sensing of Hydrogen Peroxide

In situ monitoring of hydrogen peroxide (H₂ O₂ ) during its production process is needed. Here, an electrochemical H₂ O₂ sensor with a wide linear current response range (concentration: 5 × 10^-8 to 5 × 10^-2 m), a low detection limit (32.4 × 10^-9 m), and a high sensitivity (568.47 µA mm^-1 cm^-2 ) is developed. The electrocatalyst of the sensor consists of cobalt nanoparticles and atomic Co-N_x moieties anchored on nitrogen doped carbon nanotube arrays (Co-N/CNT), which is obtained through the pyrolysis of the sandwich-like urea@ZIF-67 complex. More cobalt nanoparticles and atomic Co-N_x as active sites are exposed during pyrolysis, contributing to higher electrocatalytic activity. Moreover, a portable screen-printed electrode sensor is constructed and demonstrated for rapidly detecting (cost ≈40 s) H₂ O₂ produced in microbial fuel cells with only 50 µL solution. Both the synthesis strategy and sensor design can be applied to other energy and environmental fields.

Polyoxometalate-like sub-nanometer molybdenum(vi)-oxo clusters for sensitive, selective and stable H2O2 sensing

Polyoxometalate-like sub-nanometer molybdenum(vi)-oxo clusters supported on mesoporous carbon are stably deposited on glassy carbon and screen-printed electrodes suitable for selective, sensitive and stable H₂O₂ sensing.

Interfacial Engineering in PtNiCo/NiCoS Nanowires for Enhanced Electrocatalysis and Electroanalysis

Searching for new anti-poisoning Pt-based catalysts with enhanced activity for alcohol oxidation is the key in direct alcohol fuel cells (DAFCs). However, in the traditional strategy for designing bimetallic or multimetallic alloy is still difficult to achieve a satisfactory heterogeneous electrocatalyst because the activity often depends on only the surface atoms. Herein, we fabricate the multicomponent active sites by creating a sulfide structure on 1D PtNiCo trimetallic nanowires (NWs), to give a PtNiCo/NiCoS interface NWs (IFNWs). Owing to the presence of sulfide interfaces, the PtNiCo/NiCoS IFNWs enable an impressive methanol/ethanol oxidation reaction (MOR/EOR) performance and excellent anti-CO poisoning tolerance. They have the MOR and EOR mass activities of 2.25 Amg^-1 _Pt and 1.62 Amg^-1 _Pt , around 1.26, 3.21 and 1.46, 2.96 times higher than those of PtNiCo NWs and commercial Pt/C, respectively. CO-stripping and XPS measurements further demonstrate that the new interfacial structure and optimal bonding of Pt-CO can result in accelerating the removal of surface adsorbed carbonaceous intermediates. Moreover, such a unique structure has also demonstrated a much-improved ability for the electrochemical detection of some important molecules (H₂ O₂ and NH₂ NH₂ ).

Ultra-small dispersed Cu x O nanoparticles on graphene fibers for miniaturized electrochemical sensor applications

A graphene microfiber (GF) modified with ultrafine Cu_xO nanoparticles (Cu_xONPs/GF) has been fabricated by direct annealing of electrodeposited nano-sized copper-based metal organic frameworks (HKUST-1) and used as an electrode for nonenzymatic H₂O₂ sensing. Benefiting from the unique microfiber architecture and synergetic effects, as well as strong coupling between components with many active sites and boosted electron transport, the Cu_xONPs/GF electrode shows prominent sensitivity, selectivity and long-term operational stability for the detection of H₂O₂. Further work successfully applied this Cu_xONPs/GF electrode to detection of H₂O₂ in real samples such as milk and human serum. These results indicate that the Cu_xONPs/GF is a promising mini-sized sensor in electrochemical analysis.

A graphene microfiber modified with ultrafine Cu_xO nanoparticles (Cu_xONPs/GF) is fabricated by direct annealing of electrodeposited nano-sized copper-based metal–organic frameworks (HKUST-1) and used as an electrode for nonenzymatic H₂O₂ sensing.

High-density growth of ultrafine PdIr nanowires on graphene: reducing the graphene wrinkles and serving as efficient bifunctional electrocatalysts for water splitting

Manipulating the space distribution states, exposed surfaces, and interfacial interactions of graphene-based nanomaterials is a key strategy for taking full advantage of graphene's characteristics. Herein, we report the in situ deposition of numerous ultrafine PdIr alloy nanowires (diameter of 1.8 nm) to predominately cover the entire surface of graphene (PdIr UNWs/WFG). The high density but low atom loading (8.6 at%) of PdIr nanowires gives rise to abundant edge atoms and a rough surface, which are beneficial for the full exposure of active sites. Meanwhile, the compact PdIr overlay provides strong surface tension to stretch the graphene wrinkles, thus averting the wrapping of active sites and ensuring structural uniformity. The PdIr UNWs/WFG are qualified as efficient and robust electrocatalysts in both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), affording 10 mA cm-2 at an HER overpotential of 23 mV and 10 mA cm-2 at an OER overpotential of 290 mV, respectively. The corresponding water electrolyzer requires a cell voltage of only 1.51 V to achieve a water-splitting current density of 10 mA cm-2. This simple and novel approach for studying the coordinated form, dispersion state, and interfacial tension is promising to be a versatile method for improving the properties of graphene-based nanomaterials.

Facile Fabrication of Hierarchical rGO/PANI@PtNi Nanocomposite via Microwave-Assisted Treatment for Non-Enzymatic Detection of Hydrogen Peroxide

A hierarchical composite based on the modified reduced graphene oxide with platinum-nickel decorated polyaniline nano-spheres (rGO/PANI@PtNi) was facilely prepared via microwave-assisted self-reduction for an application in nonenzymatic hydrogen peroxide (H₂O₂) detection. Compared to the pristine rGO, the composite exhibited a much tougher surface due to the stacking of conductive PANI nano-spheres on rGO sheets, leading to good dispersion of PtNi nanoparticles and a large active area. Furthermore, the multi-valance Ni^2+/3+ in the PtNi particles effectively promoted the catalytic property of Pt sites and facilitated a superior electrochemical performance of PtNi alloy than that of neat Pt. Owing to the synergistic effect of the improved electrical conductivity and the promoted electrocatalytical property, the modified glassy carbon electrode (GCE) with rGO/PANI@PtNi nanocomposite displayed an outstanding electrochemical sensitivity towards H₂O₂ with a fast response time (<2 s), a wide linear range (0.1–126.4 mM), a low detection limit (0.5 µM), as well as a long-life stability for one week without obvious degradation. This novel strategy opens a novel and promising approach to design high performance sensors for H₂O₂ detection.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Electrically-transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high-performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical perspective, are summarized for four different groups of analytes: gases, volatile compounds, ions, and biomolecules. The sensing performance is discussed in the context of the molecular design, structure-property relationships, and device fabrication technology. The outlook of challenges and opportunities for 2D nanomaterials for the future development of electrically-transduced sensors is also presented.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

Nitrogen-Doped Graphene-Encapsulated Nickel Cobalt Nitride as a Highly Sensitive and Selective Electrode for Glucose and Hydrogen Peroxide Sensing Applications

To explore a natural nonenzymatic electrode catalyst for highly sensitive and selective molecular detection for targeting biomolecules is a very challenging task. Metal nitrides have attracted huge interest as promising electrodes for glucose and hydrogen peroxide (H₂O₂) sensing applications due to their exceptional redox properties, superior electrical conductivity, and superb mechanical strength. However, the deprived electrochemical stability extremely limits the commercialization opportunities. Herein, novel nitrogen-doped graphene-encapsulated nickel cobalt nitride (Ni _xCo_{3- x}N/NG) core-shell nanostructures with a controllable molar ratio of Ni/Co are successfully fabricated and employed as highly sensitive and selective electrodes for glucose and H₂O₂ sensing applications. The highly sensitive and selective properties of the optimized core-shell NiCo₂N/NG electrode are because of the high synergistic effect of the NiCo₂N core and the NG shell, as evidenced by a superior glucose sensing performance with a short response time of <3 s, a wide linear range from 2.008 μM to 7.15 mM, an excellent sensitivity of 1803 μA mM^-1 cm^-2, and a low detection limit of 50 nM (S/N = 3). Furthermore, the core-shell NiCo₂N/NG electrode shows excellent H₂O₂ sensing performances with a short response time of ∼3 s, a wide detection range of 200 nM to 3.4985 mM, a high sensitivity of 2848.73 μA mM^-1 cm^-2, and ultra-low limit detection of 200 nM (S/N = 3). The NiCo₂N/NG sensor can also be employed for glucose and H₂O₂ detection in human blood serum, promising its application toward the determination of glucose and H₂O₂ in real samples.

Nitrogen-rich core-shell structured particles consisting of carbonized zeolitic imidazolate frameworks and reduced graphene oxide for amperometric determination of hydrogen peroxide

Core-shell structured particles were prepared from carbonized zeolitic imidazolate frameworks (ZIFs) and reduced graphene oxide (rGO). The particles possess a nitrogen content of up to 10.6%. The loss of nitrogen from the ZIF is avoided by utilizing the reduction and agglomeration of graphene oxide with suitable size (>2 μm) during pyrolysis. The resulting carbonized ZIF@rGO particles were deposited on a glassy carbon electrode to give an amperometric sensor for H₂O₂, typically operated at a voltage of -0.4 V (vs. Ag/AgCl). The sensor has a wide detection range (from 5 × 10^-6 to 2 × 10^-2 M), a 3.3 μM (S/N = 3) detection limit and a 0.272 μA·μM^-1·cm^-2 sensitivity, much higher than that of directly carbonized ZIFs. The sensor material was also deposited on a screen-printed electrode to explore the possibility of application. Graphical abstract Nitrogen doped carbon (NC) derived from carbonized zeolitic imidazolate frameworks is limited because of low nitrogen content. Here, nitrogen-rich NC@reduced graphene oxide (rGO) core-shell structured particles are described. The NC@rGO particles show distinctly better H₂O₂ detection performance than NC.

Hybridized Polyoxometalate-Based Metal-Organic Framework with Ketjenblack for the Nonenzymatic Detection of H2 O2

The rational design and development of efficient and affordable enzyme-free electrocatalysts for electrochemical detection are of great significance for the large-scale applications of sensor materials, and have aroused increasing research interest. Herein, we report that a typical polyoxometalate (POM)-based metal-organic framework (NENU5) that was hybridized with ketjenblack (KB) was a highly efficient electrochemical catalyst that could be used for the highly sensitive nonenzymatic detection of H2 O2 . The composite catalyst exhibited superb electrochemical detection performance towards H2 O2 , including a broad linear range from 10-50 mm, a low detection limit of 1.03 μm, and a high sensitivity of 33.77 μA mm-1 , as well as excellent selectivity and stability. These excellent electrocatalytic properties should be attributed to the unique redox activity of the POM, the high specific surface area of the metal-organic framework (MOF), the strong conductivity of KB, and the synergistic effects of the multiple components in the composites during the electrolysis of H2 O2 . This work provides a new pathway for the exploration of nonenzymatic electrochemical sensors.

Ultrafine Pt–Ni bimetallic nanoparticles anchored on reduced graphene oxide nanocomposites for boosting electrochemical detection of dopamine in biological samples

The present report demonstrates the development of a Pt–Ni/rGO composite electrochemical sensor for the detection of dopamine.