Triptycene-Based Microporous Cyanate Resins for Adsorption/Separations of Benzene/Cyclohexane and Carbon Dioxide Gas

Influence of Monomer Size on CO2 Adsorption and Mechanical Properties in Microporous Cyanate Ester Resins

Molecular simulations offer valuable insights into thermosetting polymers' microstructures and interactions with small molecules, aiding in the development of advanced materials. In this study, we design two cyanate resin models featuring monomers of different sizes and employ a previously developed method to generate crosslinked structures. We then analyze their crosslinking processes and physicochemical properties. Using quantum chemistry calculations and a GCMC/MD approach, we investigate CO2 adsorption. Our results show that monomer size does not significantly affect the crosslinking process and provides a degree of polymerization as 83.8 ± 0.3% vs. 76.7 ± 1.4%, but it does influence key properties, such as the glass transition temperature (520 K vs. 420 K) and Young's modulus (2.32 GPa vs. 1.77 GPa). Moreover, CO2 adsorption differs between the two models: the introduction of propyl ether moieties lowers by around 70% CO2 uptake, indicating that specific adsorption sites impact gas adsorption. This study demonstrates a promising strategy for designing and optimizing thermosetting polymers with controllable gas separation and storage capabilities.

Three-dimensional covalent organic frameworks with nia nets for efficient separation of benzene/cyclohexane mixtures

The synthesis of three-dimensional covalent organic frameworks with highly connected building blocks presents a significant challenge. In this study, we report two 3D COFs with the nia topology, named JUC-641 and JUC-642, by introducing planar hexagonal and triangular prism nodes. Notably, our adsorption studies and breakthrough experiments reveal that both COFs exhibit exceptional separation capabilities, surpassing previously reported 3D COFs and most porous organic polymers, with a separation factor of up to 2.02 for benzene and cyclohexane. Additionally, dispersion-corrected density functional theory analysis suggests that the good performance of these 3D COFs can be attributed to the incorporation of highly aromatic building blocks and the presence of extensive pore structures. Consequently, this research not only expands the diversity of COFs but also highlights the potential of functional COF materials as promising candidates for environmentally-friendly separation applications.

A nanoporous organic polymer using 1, 3-dibromoadamantane as a crosslinker for adsorption/separation of benzene and cyclohexane

The development of nanoporous organic polymers with cycloaliphatic components for effective benzene (Bz) and cyclohexane (Cy) adsorption/separation poses a significant challenge. This work focuses on synthesizing NOP-Ad-1, a nanoporous organic polymer derived from a Friedel-Crafts reaction between cycloaliphatic 1,3-dibromadantane and aromatic hexaphenylbenzene. At 298 K and P/P0 = 0.95, NOP-Ad-1 can uptake 989 mg g-1 benzene and 441 mg g-1 cyclohexane. Moreover, as the benzene vapor ratio increased from 20% to 80%, the Bz/Cy selectivity of NOP-Ad-1 gradually decreased from 1.75 to 1.24. These findings highlight the potential application of NOP-Ad-1 in the adsorption/separation of Bz/Cy mixtures.

Porous Triptycene Network Based on Tröger's Base for CO2 Capture and Iodine Enrichment

A three-dimensional rigid "six-connected" porous triptycene network based on Tröger's base (TB-PTN) was synthesized by using triptycenes as connectors and Tröger's base as linkers. With characteristics of a high surface area of 1528 m² g^-1, nitrogen-enriched groups, and superior thermal stability, TB-PTN displays a high CO₂ uptake of 22.3 wt % (273 K, 1 bar) and excellent iodine vapor adsorption (240 wt %).

A Molybdenum(VI) Complex of 5-(2-pyridyl-1-oxide)tetrazole: Synthesis, Structure, and Transformation into a MoO3-Based Hybrid Catalyst for the Epoxidation of Bio-Olefins

The discovery of heterogeneous catalysts synthesized in easy, sustainable ways for the valorization of olefins derived from renewable biomass is attractive from environmental, sustainability, and economic viewpoints. Here, an organic–inorganic hybrid catalyst formulated as [MoO3(Hpto)]·H2O (2), where Hpto = 5-(2-pyridyl-1-oxide)tetrazole, was prepared by a hydrolysis–condensation reaction of the complex [MoO2Cl2(Hpto)]∙THF (1). The characterization of 1 and 2 by FT-IR and Raman spectroscopies, as well as 13C solid-state NMR, suggests that the bidentate N,O-coordination of Hpto in 1 (forming a six-membered chelate ring, confirmed by X-ray crystallography) is maintained in 2, with the ligand coordinated to a molybdenum oxide substructure. Catalytic studies suggested that 2 is a rare case of a molybdenum oxide/organic hybrid that acts as a stable solid catalyst for olefin epoxidation with tert-butyl hydroperoxide. The catalyst was effective for converting biobased olefins, namely fatty acid methyl esters (methyl oleate, methyl linoleate, methyl linolenate, and methyl ricinoleate) and the terpene limonene, leading predominantly to the corresponding epoxide products with yields in the range of 85–100% after 24 h at 70 °C. The versatility of catalyst 2 was shown by its effectiveness for the oxidation of sulfides into sulfoxides and sulfones, at 35 °C (quantitative yield of sulfoxide plus sulfone, at 24 h; sulfone yields in the range of 77–86%). To the best of our knowledge, 2 is the first molybdenum catalyst reported for methyl linolenate epoxidation, and the first of the family [MoO3(L)x] studied for methyl ricinoleate epoxidation.

The Kinetics of Formation of Microporous Polytriazine in Diphenyl Sulfone

This study highlights the value of nonisothermal kinetic methods in selecting temperature conditions for the isothermal preparation of microporous polymeric materials. A dicyanate ester is synthesized and the kinetics of its polymerization in diphenyl sulfone are studied by calorimetry under nonisothermal conditions. The kinetics are analyzed by a model-based approach, using the Kamal model, as well as by a model-free approach, using an advanced isoconversional method. Both approaches correctly predict the time to completion of polymerization at a given temperature. The material prepared independently at the predicted temperature is characterized by electron microscopy and CO₂ adsorption measurements and is confirmed to possess a microporous structure with a multimodal distribution of micropores with two major maxima at ~0.5 and 0.8 nm.

Covalent triazine frameworks for the dynamic adsorption/separation of benzene/cyclohexane mixtures

High adsorption selectivities for benzene and cyclohexane of three covalent triazine frameworks have been prepared via Friedel–Crafts reactions.

Radiation-initiated high strength chitosan/lithium sulfonate double network hydrogel/aerogel with porosity and stability for efficient CO2 capture

Developing efficient and inexpensive CO₂ capture technologies is a significant way to reduce carbon emissions. In this work, a novel chitosan/lithium sulfonate double network high strength hydrogel is synthesized by electron beam radiation. Due to the electron beam having a wide radiation area and certain penetrating power, the free radical polymerization can be initiated more uniformly and quickly in the hydrogel. The network structure of the hydrogel prepared by radiation-initiated polymerization is more uniform than that prepared by conventional chemical initiator-initiated polymerization. Meanwhile, the introduction of the second network to construct the double network structure does not reduce the surface area of the aerogel, which is different from the conventional method of grafting or impregnation modified porous materials. Moreover, the synthesized aerogels have good physical and chemical stability. The freeze-dried aerogels possess a porous structure and CO₂ capture ability due to the CO₂-philic double network structure. Because of the inexpensive raw material and convenient radiation process, this work can reduce the cost of CO₂ adsorbents and has prospects of application in the field of CO₂ solid adsorbents.

Chitosan hydrogel is regenerated from alkali/urea aqueous solution and the lithium sulfonate second network is introduced by electron beam radiation-initiated in situ free radical polymerization. The freeze-dried aerogel has CO₂ capture capacity.

Microporous polycarbazole frameworks with large conjugated π systems for cyclohexane separation from cyclohexane-containing mixtures

Two microporous polycarbazole frameworks with large conjugated π systems were constructed for cyclohexane separation from cyclohexane-containing mixtures.

Solvent-induced changes in the reactivity of tricyanate esters undergoing thermal polymerization

The mechanism of thermally stimulated polymerization of tricyanate ester remains the same in solution as in the melt, but Arrhenius parameters of the rate-limiting reaction are significantly affected by solvation.

Micro- and Ultramicroporous Polyaminals for Highly Efficient Adsorption/Separation of C1-C3 Hydrocarbons and CO2 in Natural Gas

This paper presents a series of micro- and ultramicroporous polyaminals with BET surface areas up to 1304 m² g^-1, which are prepared from two triazine-based tetraamines and three dialdehydes or monoaldehyde through the A₄ + B₂ or A₄ + B₁ aminalization reaction. It is interesting to find that the para-substituted monomers are favorable to force the linking struts apart in the network to generate micropores (1.22 nm), whereas the meta-substituted monomers make the pores in the network squeezed by the twisted linking struts, resulting in the formation of ultramicropores (0.52 nm). Besides, the adsorption behaviors of the major components of natural gas, such as propane (C₃H₈), ethane (C₂H₆), methane (CH₄), and carbon dioxide (CO₂), are significantly different, strongly depending on the polarizabilities, critical temperatures, molecular sizes of gases, porosity parameters of polymers, and the interaction between gases and the polymer skeleton. At 298 K/1 bar, the polymers show high uptake for C₃H₈ (114.5 cm³ g^-1) and C₂H₆ (84.2 cm³ g^-1). Moreover, the adsorption selectivities of C₃H₈/CH₄, C₂H₆/CH₄, C₃H₈/C₂H₆, C₃H₈/CO₂, C₂H₆/CO₂, and CO₂/CH₄ also reach 296.3, 23.1, 9.0, 22.1, 4.1, and 5.0, respectively, exhibiting promising applications in adsorption/separation of C₁-C₃ hydrocarbons and stripping CO₂ gas from natural gas under the ambient condition.

Triptycene-Based and Schiff-Base-Linked Porous Networks: Efficient Gas Uptake, High CO2/N2 Selectivity, and Excellent Antiproliferative Activity

A set of unique triptycene-based and organic Schiff-base-linked polymers (TBOSBLs) are conveniently synthesized in which triptycene motifs are connected with 1,3,5-triformylphloroglucinol units via Schiff-base linkages. TBOSBLs are amorphous, thermally stable with a reasonable surface area (SABET up to 649 m2/g), and have abundant nanopores (pore size < 100 nm). TBOSBLs are good sorbents for small gas molecules (such as CO2, H2, and N2) and they can selectively capture CO2 over N2. Additionally, TBOSBLs show superior antiproliferative activity against human colorectal cancer cells relative to previously reported covalent organic frameworks (COFs). The mechanism of cell death is also studied elaborately.

Exceptionally Stable Microporous Organic Frameworks with Rigid Building Units for Efficient Small Gas Adsorption and Separation

Three microporous organic frameworks (hereafter denoted as MPOF-Ads) based on a rigid adamantane core have been successfully synthesized via Sonogashira-Hagihara polycondensation coupling in high yields, 83.7-94.6%. The obtained amorphous MPOF-Ads networks have high Brunauer-Emmett-Teller surface areas (up to 737.3 m² g^-1), narrow pore size distribution (0.95-1.06 nm), and superior thermal (the initial decomposition temperature T_5% under an N₂ atmosphere can reach 410 °C) and chemical stability (no apparent degradation in common organic solvents or strong acid/base solutions after 7 days). At 273 K and 1.0 bar, these MPOF-Ads networks present good uptake capacities for small gas molecules (13.9 wt % CO₂ and 1.66 wt % CH₄) for which the presence of high surface area, predominant microporosity, and narrow pore size distribution are beneficial. In addition, the as-prepared MPOF-Ads networks possess moderate isosteric heats for CO₂ (Q_st = 19.5-30.3 kJ mol^-1) and show desired CO₂/N₂ and CO₂/CH₄ selectivity (36.3-38.4 and 4.1-4.3 based on Henry's law and 17.88-24.92 and 4.24-5.70 based on ideal adsorbed solution theory, respectively). With the demonstrated properties, the synthesized MPOF-Ads networks display potential for small gas storage and separation that can be used in harsh environments because of their superior physical and chemical stability.

A new honeycomb metal–carboxylate-tetrazolate framework with multiple functions for CO2 conversion and selective capture of C2H2, CO2 and benzene

A stable Cd-MOF was built by a carboxylate-tetrazolate ligand, which contains hexagonal channels and reveals multiple functions including separation of CO₂/CH₄, C₂H₂/CO₂, C₂H₂/CH₄ and benzene/cyclohexane, and catalytic conversion of CO₂ with epoxides.

Nanoporous Organic Network Coating of Nanostructured Polymer Films with Enhanced Adsorption Performance toward Particulate Matter

This work shows that the surface properties of polyurethane acrylate (PUA) films can be controlled by the coating of nanoporous organic networks (NONs). By the NON coating, the hydrophilic nature of nanostructured PUA (N-PUA) film was converted to superhydrophobic surface. The NON-coated N-PUA films (N-PUA-NONs) were applied as stationary adsorbents for the capture of particulate matter (PM) in air. Compared with the original PUA films, the N-PUA-NON films showed much enhanced capture performance toward PM and recyclability through water washing, indicating the potential of outdoor application as stationary self-cleaning adsorbents under natural surroundings.

Cost-effective preparation of microporous polymers from formamide derivatives and adsorption of CO2 under dry and humid conditions

Nitrogen-rich microporous polymers are prepared via a catalyst-free polymerization reaction using formamide derivatives as monomers, which exhibit outstandingly high CO₂/N₂ selectivity up to 151 and 173 at 273 K under dry and humid conditions, respectively.

Pristine and Carboxyl-Functionalized Tetraphenylethylene-Based Ladder Networks for Gas Separation and Volatile Organic Vapor Adsorption

A novel tetraphenylethylene-based ladder network (MP1) made by polycondensation reaction from 4,4',4″,4‴-(ethene-1,1,2,2-tetrayl)tetrakis(benzene-1,2-diol) and 2,3,5,6-tetrafluoroterephthalonitrile and its COOH-functionalized analogue (MP2) were synthesized for the first time. Their structures were confirmed by solid-state nuclear magnetic resonance (13C cross-polarization magic angle spinning), Fourier transform infrared spectroscopy, and elementary analysis. MP1 exhibited a high Brunauer-Emmett-Teller surface area (1020 m2 g-1), whereas the COOH-functionalized MP2 showed a much smaller surface area (150 m2 g-1) but displayed a more uniform pore size distribution. Because of the high density of nitrile groups in the network polymers of intrinsic microporosity (PIMs) and strong interaction with quadrupole CO2 molecules, MP1 exhibited a high CO2 adsorption capacity of 4.2 mmol g-1 at 273 K, combined with an isosteric heat of adsorption (Q st) of 29.6 kJ mol-1. The COOH-functionalized MP2 showed higher Q st of 34.2 kJ mol-1 coupled with a modest CO2 adsorption capacity of 2.2 mmol g-1. Both network PIMs displayed high theoretical ideal adsorbed solution theory CO2/N2 selectivities (51 and 94 at 273 K vs 34 and 84 at 298 K for MP1 and MP2, respectively). The high selectivities of MP1 and MP2 were confirmed by experimental column breakthrough experiments with CO2/N2 selectivity values of 23 and 45, respectively. Besides the promising CO2 capture and CO2/N2 selectivity properties, MP1 also demonstrated high sorption capacity for toxic volatile organic vapors. At 298 K and a relative pressure of 0.95, benzene and toluene sorption uptakes reached 765 and 1041 mg g-1, respectively. Moreover, MP1 also demonstrated some potential for adsorptive separation of xylene isomers with adsorptive selectivity of 1.75 for m-xylene/o-xylene.

Selective Adsorption and Separation of Xylene Isomers and Benzene/Cyclohexane with Microporous Organic Polymers POP-1

The separation of chemical substances with analogous chemical structures and physical properties remains a great challenge. In this work, triptycene-like microporous organic polymers (MOPs), POP-1, was synthesized via choosing 1,4-dimethoxybenzene (DMB) and triptycene as external cross-linkers and building blocks, respectively, and POP-1 was employed to separate xylene isomers and benzene (Bz)/cyclohexane (Cy). Results show that POP-1 has a higher uptake for m-xylene (0.29 g/g) and Bz (1.02 g/g); more intriguingly, their complete separation can be realized within 0.6 min using a column packed with POP-1. The interaction between POP-1 networks and adsorbates was also investigated using theoretical (density functional theory together with noncovalent interaction analysis) and experimental (inverse gas chromatography) approaches. Especially, both results present a good agreement, that is, weak interactions such as CH/π interactions play a dominant role in defining the separation performance of POP-1 for xylene isomers and Bz/Cy mixtures. Our findings suggest that MOPs may open up a new route for separating the chemicals that are similar in structure and size.