Aggregation-Induced Enhanced Electrochemiluminescence from Organic Nanoparticles of Donor-Acceptor Based Coumarin Derivatives

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

Self-Assembled Tetraphenylethene-Based Nanoaggregates with Tunable Electrochemiluminescence for the Ultrasensitive Detection of E. coli

As an effective ECL emitter, tetraphenylethene (TPE)-based molecules have recently been reported with aggregation-induced electrochemiluminescence (AIECL) property, while it is still a big challenge to control its aggregation states and obtain uniform aggregates with intense ECL emission. In this study, we develop three TPE derivatives carrying a pyridinium group, an alkyl chain, and a quaternary ammonium group via the Menschutkin reaction. The resulting molecules exhibit significantly red-shifted FL and enhanced ECL emissions due to the tunable reduction of the energy gap between the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs). More importantly, the amphiphilicity of the as-developed molecules enables their spontaneous self-assembly into well-controlled spherical nanoaggregates, and the ECL intensity of nanoaggregates with 3 -CH2- (named as C3) is 17.0-fold higher compared to that of the original 4-(4-(1,2,2-triphenylvinyl)phenyl)pyridine (TPP) molecule. These cationic nanoaggregates demonstrate a high affinity toward bacteria, and an ECL sensor for the profiling of Escherichia coli (E. coli) was developed with a broad linear range and good selectivity in the presence of an E. coli-specific aptamer. This study provides an effective way to enhance the ECL emission of TPE molecules through their derivatization and a simple way to prepare well-controlled AIECL nanoaggregates for ECL application.

Label-Free Electrogenerated Chemiluminescence Aptasensing Method for Highly Sensitive Determination of Dopamine via Target-Induced DNA Conformational Change

A label-free electrogenerated chemiluminescence (ECL) aptasensing method for highly sensitive determination of dopamine (DA) was developed based on target-induced DNA conformational change. After anti-DA specific aptamer, as molecular recognition element, was hybridized with a capture ss-DNA (complementary with the aptamer), the formed double-strand DNA (ds-DNA) was self-assembled onto the surface of a gold electrode, and then Ru(phen)₃²⁺, as ECL reagent, was intercalated into ds-DNA to form an ECL biosensing platform. In the presence of DA, DA bound with its aptamer and target-induced DNA conformational change occurred, resulting in the dissociation of ds-DNA, the release of intercalated Ru(phen)₃²⁺ from the electrode surface, and the decrease of ECL intensity. For comparison, an ECL aptamer-based biosensing method using an ECL reagent-labeled aptamer was also developed for DA assay based on target-induced DNA conformational change. Because of the increase in the amount of ECL reagent into ds-DNA over that of the single-site ECL reagent-labeled aptamer, an obvious increase of ECL intensity was found at the ds-DNA modified electrode over the aptamer modified electrode. DA can be sensitively detected with a lower detection limit of 0.05 nM in the range from 0.1 to 100 nM. With the recognition of the aptamer for DA, DA can be selectively and sensitively detected in artificial cerebrospinal fluid and serum samples without interference from common small molecules. This work demonstrates that the combination of the direct transduction of specific recognition of DA and its aptamer into an ECL signal with Ru(phen)₃²⁺ intercalated ds-DNA amplification provides a promising strategy for the development of a simple, sensitive, and selective method for DA assay, which is of great importance in neurochemical assays and clinical diagnosis.

Recent advances and challenges in developing electrochemiluminescence biosensors for health analysis

This Feature Article simply introduces principles and mechanisms of electrochemiluminescence (ECL) biosensors for the determination of biomarkers and highlights recent advances of ECL biosensors on key aspects including new ECL reagents and materials, new biological recognition elements, and emerging construction biointerfacial strategies with illustrative examples and a critical eye on pitfalls and discusses challenges and perspectives of ECL biosensors for health analysis.

Advances in electrochemiluminescence luminophores based on small organic molecules for biosensing

Electrochemiluminescence (ECL) has several advantages, such as a near-zero background signal, high sensitivity, wide dynamic range, simplicity, and is widely used for sensing, imaging, and single cell analysis. ECL luminophores are the key factors in the performance of various applications. Among various luminophores, small organic luminophores exhibit many intriguing features including good biocompatibility, facile modification, well-defined molecular structure, and sustainable raw materials, making small organic luminophores attractive for the use in the ECL field. Although many great achievements have been made in the synthesis of new small organic luminophores, solving various challenges, and expanding new applications, there are almost no comprehensive reviews on small organic ECL luminophores. In this review, we briefly introduce the advantages and emission mechanisms of small organic ECL luminophores, summarize the main types, molecular characteristics, and ECL properties of most existing small organic ECL luminophores, and present the important applications and design principles in sensors, imaging, single cell analysis, sterilization, and other fields. Finally, the challenges and outlook of organic ECL luminophores to be popularized in biosensing applications are also discussed.

Hexagon AgNCs/PVP Crystallization Induced Cathode Electrochemiluminescence Enhancement for miRNA221 Biosensing

Aggredation-induced electrochemiluminescence (AIECL) promises an efficient strategy for synthesize highly luminescent emitter and co-reactant for ECL analysis, however, rational control of electrogenerated emission intensity is still challenging. The low electroconductivity and amorphous molecular configuration are intrinsic bottleneck. This work reveals the impact of polyvinyl pyrrolidone backbone regulated silver nanocrystallines (AgNCs/PVP) on the cathode AIECL properties in near infrared region, by employing the Box-Behnken designed response surface computation model to modulate crystal aggregates. Electron paramagnetic resonance spectroscopy discovered hydrogen radical (HO^• ) dominant reductive-oxidative (R-O) ECL mechanism with AgNCs acting as the co-reaction accelerator in graphene oxide/persulfate system (GO/S₂ O₈ ^2- ). Both theoretical calculation and experimental measurement testified that the ECL of AgNCs in GO/S₂ O₈ ^2- dependent on the concentration of in situ electrochemical oxidized Ag⁺ . The high efficiency of crystallization-induced enhanced ECL (CIECL) originates from 1) the effective electron transfer of Ag⁺ accelerated HO^• produce to notable promote radioactive transition, and 2) twisted intramolecular charge transfer from the electron-rich donor of PVP to electron-deficient receptor of Ag⁰ to restrict nonradioactive transition. The AgNCs/PVP with CIECL effect are applied to construct an ultrasensitive platform for miR-221 assay with a lower detection limit of 7.47 × 10³  copies mL^-1 than typical qPCR method.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Highly Efficient Aggregation-Induced Enhanced Electrochemiluminescence of Cyanophenyl-Functionalized Tetraphenylethene and Its Application in Biothiols Analysis

Exploring new electrochemiluminescence (ECL) luminophores with high ECL efficiency and good stability in aqueous solution is in great demand for biological sensing. In this work, highly efficient aggregation-induced enhanced ECL of cyanophenyl-functionalized tetraphenylethene (tetra[4-(4-cyanophenyl)phenyl]ethene, TCPPE) and its application in biothiols analysis were reported. TCPPE contains four 4-cyanophenyl groups covalently attached to the tetraphenylethene (TPE) core, generating a nonplanar three-dimensional twisted conformation structure. TCPPE nanoparticles (NPs) with an average size of 15.84 nm were prepared by a precipitation method. High ECL efficiency (593%, CdS as standard) and stable ECL emission (over one month) were obtained for TCPPE NPs in aqueous solution. The unique properties of TCPPE NPs could be ascribed to the efficient suppression of nonradiative transition, the decrease of the energy gap, and the increase of anionic radical stability, which were proved by theoretical calculation and electrochemical and fluorescence methods. Contrasting aggregation-induced ECL chromic emission was first observed for TCPPE NPs. As a proof-of-methodology, an ECL method was developed for three biothiol assays with detection limits of 6, 7, and 300 nM for cysteine, homocysteine, and glutathione, respectively. This work demonstrates that TCPPE NPs are promising ECL luminophores, and the incorporation of appropriate substituents into luminophores can improve ECL efficiency and radical stability.

A scaffold of thermally activated delayed fluorescent polymer dots towards aqueous electrochemiluminescence and biosensing applications

Thermally activated delayed fluorescent (TADF) polymer dots were prepared, which enables aqueous electrochemiluminescence of TADF polymer emitters and its biosensor application for the first time.

A robust molecularly imprinted electrochemiluminescence sensor based on a Ni–Co nanoarray for the sensitive detection of spiramycin

A simple and robust molecularly imprinted electrochemiluminescence sensor for the detection of spiramycin is fabricated based on Ni–Co LDH nanoarrays and is directly used as a sensor platform.

An ultrasensitive ratiometric immunosensor based on the ratios of conjugated distyrylbenzene derivative nanosheets with AIECL properties and electrochemical signal for CYFRA21-1 detection

Aggregation-induced electrochemiluminescence reagent, a distyrylbenzene derivative with donor-acceptor conjugated nanosheet structure, namely TPAPCN, was used as a trace label and modified on the electrode through the formation of classical sandwich complex of antibody-antigen-antibody in this work. In aggregate state, TPAPCN with twisted structure was limited in nanometer space through intermolecular π - π stacking interactions, which not only restricts the intramolecular motions but also combines a large number of singlet excitons to greatly trigger electrochemiluminescence (ECL). The ECL signal of this system enhanced with more captured cytokeratin 19 fragment 21-1 (CYFRA21-1) on the modified electrode. Three-dimensional graphene/platinum nanoparticles with large specific surface, and excellent electroconductivity and biocompatibility were prepared and acted as excellent carriers for thionine handling (3D-GN/PtNPs/Th), which was employed for improving the loading of antibodies and generating internal electrochemical signal. Consequently, a novel ratiometric sandwich immunosensor for CYFRA21-1 detection was fabricated based on TPAPCN and 3D-GN/PtNPs/Th, that is, a rapid and reliable detection was achieved through the ratio between ECL and electrochemical signals. The prepared sensor performed good linearity in the range of 50 fg/mL to 1 ng/mL with a detection limit as low as 16 fg/mL. Moreover, the detection results revealed well in the analysis of human serum samples, demonstrating a significant application for clinical monitoring and biomolecules detection.

Construction of self-enhanced photoelectrochemical platform for L-cysteine detection via electron donor-acceptor type coumarin 545 aggregates

Self-enhanced electron donor-acceptor type coumarin 545 aggregates prepared via an anionic surfactant-assisted reprecipitation method provide an underlying approach for the photoelectrochemical detection of L-cysteine, which can be employed in aqueous solution without the addition of electron donors.

Aggregation-induced delayed fluorescence luminogens: the innovation of purely organic emitters for aqueous electrochemiluminescence

Due to overcoming the limitation of aggregation caused quenching (ACQ) of solid-state emitters, aggregation-induced emission (AIE) organic luminogens have become a promising candidate in aqueous electrochemiluminescence (ECL). However, restricted by the physical nature of fluorescence, current organic AIE luminogen-based ECL (AIECL) faces the bottleneck of low ECL efficiency. Here, we propose to construct de novo aqueous ECL based on aggregation-induced delayed fluorescence (AIDF) luminogens, called AIDF-ECL. Compared with the previous organic AIE luminogens, purely organic AIDF luminogens integrate the superiorities of both AIE and the utilization of dark triplets via thermal-activated spin up-conversion properties, thereby possessing the capability of close-to-unity exciton utilization for ECL. The results show that the ECL characteristics using AIDF luminogens are directly related to their AIDF properties. Compared with an AIECL control sample based on a tetraphenylethylene AIE moiety, the ECL efficiency of our AIDF-ECL model system is improved by 5.4 times, confirming the excellent effectiveness of this innovative strategy.

Arousing Electrochemiluminescence Out of Non-Electroluminescent Monomers within Covalent Organic Frameworks

Covalent organic frameworks (COFs) with stable long-range ordered arrangements are promising materials for organic optoelectronics. However, their electrochemiluminescence (ECL) from non-ECL active monomers has not been realized. Here, we report a design strategy for ECL-emitting COF family. The donors and acceptors co-crystallized and stacked into the highly aligned array of olefin-linked COFs, so that electrons can be transported freely. By this means, a tunable ECL is activated from non-ECL molecules with the maximum efficiency of 32.1% in water with the dissolved oxygen as an inner coreactant, and no additional noxious co-reactant is needed any more. Quantum chemistry calculations further demonstrate that this design reduces the COFs' band gaps and the overlap of electrons and holes in the excited state for better photoelectric properties and stronger ECL signals. This work exploits a basis to envisage the broad application potential of ECL-COFs for various biosensors and light-emitting display.

Label-free immunosensor for cardiac troponin I detection based on aggregation-induced electrochemiluminescence of a distyrylarylene derivative

Herein, the aggregation-induced electrochemiluminescence (AIECL) of a distyrylarylene derivative, 4,4'-bis(2,2-diphenylvinyl)-1,1'-biphenyl (DPVBi), was investigated for the first time. This luminophore exhibits significantly enhanced photoluminescence (PL) and electrochemiluminescence (ECL) emission with the increases of water content in organic/water mixtures. This high luminescence efficiency of DPVBi in aggregate state is due to the fact that the aggregates can reduce the energy loss by restricting the intramolecular motions. The ECL behavior of DPVBi in acetonitrile was investigated by ECL transients and so-called "half-scan" technology, where singlet-singlet annihilation ECL was generated under continuous potential switching. The DPVBi nanobulks (DPVBi NBs) were prepared to improve its application in aqueous media, which could be conveniently cast on electrode surface for developing sensing platform due to its good film-forming nature. The constructed heterogeneous AIECL platform can produce reductive-oxidative and oxidative-reductive ECL by using trimethylamine (TEA) and potassium peroxodisulfate (K₂S₂O₈) as coreactant. On the basis of the higher ECL efficiency of DPVBi NBs/TEA system, a label free immunosensor for cardiac troponin I (cTnI) was developed with the assistance of electrodeposited gold nanoparticles, and it showed a wide linear range of 20 ng/mL~100 fg/mL and low detection limit of 43 fg/mL. Moreover, the constructed immunosensor also exhibited good specificity, stability and satisfied performance in practical sample analysis.

Aggregation-Induced Emission in Electrochemiluminescence: Advances and Perspectives

The discovery of aggregation-induced electrochemiluminescence (AIECL) in 2017 opened new research paths in the quest for novel, more efficient emitters and platforms for biological and environmental sensing applications. The great abundance of fluorophores presenting aggregation-induced emission in aqueous media renders AIECL a potentially powerful tool for future diagnostics. In the short time following this discovery, many scientists have found the phenomenon interesting, with research findings contributing to advances in the comprehension of the processes involved and in attempts to design new sensing platforms. Herein, we explore these advances and reflect on the future directions to take for the development of sensing devices based on AIECL.

Nanoformulations of Coumarins and the Hybrid Molecules of Coumarins with Potential Anticancer Effects

Coumarins are the secondary metabolites of some plants, fungi, and bacteria. Coumarins and the hybrid molecules of coumarins are the compounds which have been widely studied for their potential anticancer effects. They belong to benzopyrone chemical class, more precisely benzo-α-pyrones, where benzene ring is fused to pyrone ring. In nature, coumarins are found in higher plants like Rutaceae and Umbelliferae and some essential oils like cinnamon bark oil, cassia leaf oil and lavender oil are also rich in coumarins. The six main classes of coumarins are furanocoumarins, dihydrofuranocoumarins, pyrano coumarins, pyrone substituted coumarins, phenylcoumarins and bicoumarins. As well as their wide range of biological activities, coumarins and the hybrid molecules of coumarins are proven to have an important role in anticancer drug development due to the fact that many of its derivatives have shown an anticancer activity on various cell lines. Osthol, imperatorin, esculetin, scopoletin, umbelliprenin, angelicine, bergamottin, limettin, metoxhalen, aurapten and isopimpinellin are some of these coumarins. This review summarizes the anticancer effects of coumarins and their hybrid molecules including the novel pharmaceutical formulations adding further information on the topic for the last ten years and basically focusing on the structureactivity relationship of these compounds in cancer.

A novel electrochemiluminescence sensor based on resonance energy transfer from MoS2QDs@g-C3N4 to NH2-SiO2@PTCA for glutathione assay

In this work, a solid-state electrochemiluminescence (ECL) sensor based on resonance energy transfer (RET) was proposed using MoS2QDs@g-C3N4 as a donor and NH2-SiO2@PTCA as an acceptor. Herein, MoS2QDs could significantly facilitate the stability and efficiency of the ECL of g-C3N4. PTCA provided a large platform to anchor NH2-SiO2 nanoparticles. The prepared MoS2QDs@g-C3N4 exhibited good spectral overlap with the UV-vis absorption spectrum of NH2-SiO2@PTCA. Based on this, we designed an "off-on" ECL sensing strategy for sensitive and selective detection of glutathione (GSH). Under the best conditions, the linear range of the sensor for GSH detection was from 0.001 to 100 μM with a detection limit of 0.63 nM (S/N = 3). More importantly, GSH in commercial samples can be detected using the proposed sensor, which indicated its superior detection capabilities and potential application value in commercial medicines.

Electrochemistry and Electrochemiluminescence of Coumarin Derivative Microrods: Mechanism Insights

Organic molecules and related nanomaterials have attracted extensive attention in the realm of electrochemiluminescence (ECL). Herein, a well-known electroluminescence (EL) dopant 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino-[9,9a,1gh] coumarin (C545T) is selected as a new ECL illuminant, which shows a high photoluminescence quantum yield of nearly 100% and excellent ECL performance in the organic phase. For utilizing C545T to achieve ECL detection in aqueous solution, organic microrods of C545T (C545T MRs) were synthesized by a precipitation method. Cyclic voltammetry and differential pulse voltammetry of C545T and C545T MRs in acetonitrile or phosphate buffer showed one reduction and multiple oxidation peaks, suggesting that the multiple charge states of C545T could be produced by continuous electron- or hole-injection processes. The annihilated ECL emission of C545T and C545T MRs was observed using ECL transient technology. In the presence of triethanolamine (TEOA) or potassium persulfate (K₂S₂O₈), C545T MRs can also give bright anodic and cathodic ECL emission at the GCE/water interface. The proposed ECL system not only has multichannel ECL emission but also shows intense yellow emission (569 nm) with a relative ECL efficiency of 0.81 when TEOA was used as a coreactant. Benefiting from the strong ECL emission of the C545T MRs/TEOA system and the quenching effect of dopamine (DA) on ECL, a convenient sensor for DA was developed with high selectivity and sensitivity.

Aggregation-Induced Electrochemiluminescence Immunosensor Based on 9,10-Diphenylanthracene Cubic Nanoparticles for Ultrasensitive Detection of Aflatoxin B1

9,10-Diphenylanthracene cubic nanoparticles (DPA CNPs) with aggregation-induced emission characteristic (AIEgens) were synthesized through a facile reprecipitation method; then, a bright and stable electrochemiluminescence (ECL) signal can be observed when the DPA CNPs were modified at the glassy carbon electrode (GCE) in the presence of Tri-n-propylamine (TPA). This phenomenon is ascribed to the molecules with restricted movement that greatly blocked the energy leakage during the relaxation of the excited state, which facilitated the emission of energy in the form of photons. In addition, the size confinement effect of DPA CNPs in the aggregated state effectively enhanced the ECL emission. The application of DPA CNPs with AIE characteristics in an electrochemiluminescence immunosensor has not been reported. In this contribution, a free-label aggregation-induced electrochemiluminescence immunosensor based on DPA CNPs was fabricated and a simple strategy for ultrasensitive detection of aflatoxin B₁ (AFB₁) was proposed. The ECL signal is quenched linearly in the range of 0.01 pg/mL to 100 ng/mL for AFB₁, and the detection limit is 3 fg/mL. In summary, the prepared sensor exhibits high sensitivity, acceptable accuracy, good anti-interference ability and stability, and satisfactory detection toward AFB₁ in walnut samples. Therefore, the fabricated immunosensor will have significant applications in the fields of food, medicine, and so on.

Switching the Photoluminescence and Electrochemiluminescence of Liposoluble Porphyrin in Aqueous Phase by Molecular Regulation

By a facile peripheral decoration of 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (ATPP) with inherent aggregation-induced emission (AIE) active tetraphenylethene (TPE), a versatile AIEgenic porphyrin derivative (ATPP-TPE) was obtained, which greatly abolishes the detrimental π-π stacking and thus surmounts the notorious aggregation-caused quenching (ACQ) effect of ATPP in aqueous phase. The photoluminescence of ATPP-TPE is 4.5-fold stronger than ATPP at aggregation state. Moreover, an unequivocal aggregation induced electrochemiluminescence (AIECL) of ATPP-TPE was found to be seriously dependent on its aggregation property in aqueous solution with efficiency of 34 %, which is 6 times higher than pure ATPP. The versatility of this molecular structure modulation strategy along with the ACQ-to-AIE transformation in this work provides direction to guide for applying liposoluble porphyrins in aqueous phase by designs of synthetic porphyrin AIEgens.

Amplified electrochemiluminescence signals promoted by the AIE-active moiety of D-A type polymer dots for biosensing

Three-component conjugated polymers of a strong donor-acceptor (D-A) type could be synthesized by Pd-catalyzed Suzuki coupling polymerization reaction of 1,2-bis(4-bromophenyl)-1,2-diphenylethene (M-1) with 9-octyl-3,6-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9H-carbazole (M-2) and 4,6-bis((E)-4-bromostyryl)-2,2-difluoro-5-phenyl-2H-1l3,3,2l4-dioxaborinine (M-3). Among them, P-1 and P-2 with high TPE ratios at 0.95 and 0.9 showed obvious aggregation-induced emission (AIE) behavior; in contrast P-3 with a low TPE ratio at 0.8 showed an aggregation-caused quenching (ACQ) phenomenon. In particular, the three resulting polymer dots (P-1 to P-3 Pdots) exhibited a 200 mV lower electrochemiluminescence (ECL) potential due to their strong D-A electronic structure. Most importantly, the ECL signals of Pdots could be enhanced as high as 3 times by increasing their AIE-active TPE moiety ratios from 0.8 (P-3) to 0.95 (P-1) via the band gap emission process. Herein, P-1 Pdots with the strongest ECL signal were successfully used as ECL biosensors for the detection of catechol, epinephrine and dopamine with detection limits of 1, 7 and 3 nM, respectively. This work provides a new strategy for developing highly sensitive ECL biosensors by the smart structure design of the AIE-active Pdots.

A mass-amplifying electrochemiluminescence film (MAEF) for the visual detection of dopamine in aqueous media

A bright and metal-free mass-amplifying electrochemiluminescence film (MAEF) performing in aqueous media was reported for the first time. Systematic studies demonstrated that the film substrates have a remarkable influence on the electrochemiluminescence (ECL) performance. Gold substrates promote ECL reactions and the subsequent radiative decay process simultaneously, affording an unconventional 507-fold ECL enhancement. Such a gold-enhanced MAEF is opposite to ECL systems previously reported, in which the use of gold electrodes normally results in decreased ECL intensity due to passivation of the gold surface by oxide formation. More importantly, the ECL intensity of the MAEF is linearly amplified through facilely regulating luminogen loading. Morphological analysis reveals that the film consists of grass-like nanowires with a diameter of 57 nm, which facilitate electrical communication between the luminogen, electrode, and supporting electrolyte, giving rise to the mass-amplifying ECL. The bright ECL of the solid film in aqueous media can be readily observed by the naked eye, entirely different from visible ECL systems reported in which ruthenium complexes dissolved/dispersed in solution are used as the luminogens. The film is further utilized to detect dopamine (DA), an important biomolecule related to nervous diseases, in aqueous media, with a low detection limit of 3.3 × 10-16 M. Furthermore, a facile method based on grayscale analysis of ECL images (GAEI) of the film was developed for visual and ultrasensitive DA detection in aqueous media.

Highly Efficient Aggregation-Induced Electrochemiluminescence of Polyfluorene Derivative Nanoparticles Containing Tetraphenylethylene

The aggregation-induced electrochemiluminescence (AIECL) of polyfluorene derivative nanoparticles containing tetraphenylethylene (TPE) in aqueous media is reported in this work. The TPE unit limits the intramolecular free rotation of phenyl rings, as well as the π-π stacking interactions of molecules, which significantly enhances ECL signal of the polyfluorene nanoparticles. With co-reactants of tri-n-propylamine (TPrA) and S2O82-, the copolymer nanoparticles show visualized ECL emissions at both positive and negative potentials. The ECL efficiency of copolymer nanoparticles in solid state is 163% compared with that of standard ECL species, Ru(bpy)32+. And at negative potential, the ECL intensity of copolymer nanoparticles is even stronger with 6.5 times compared with that at positive potential. The ECL generation mechanisms are analyzed detailed by annihilation and co-reactant route transient ECL test (millisecond scale). This work provides a reference for the organic structure design for AIECL and shows promising potential in luminescent device and biological applications.

Electrogenerated Chemiluminescence Biosensing

This Feature simply introduces the history and mechanism of classical electrogenerated chemiluminescence (ECL) systems for the detection of biomolecules, highlights new advances and emerging fields of the ECL biosensing with recent illustrative examples, and presents the challenges and perspectives of ECL biosensing.

Recent Advances in Aggregation-Induced Electrochemiluminescence

The emergence of the rising alliance between aggregation-induced emission (AIE) and electrochemiluminescence (ECL) is defined as aggregation-induced electrochemiluminescence (AIECL). The booming science of AIE has proved to be not only distinguished in luminescent materials but could also inject new possibility into ECL analysis. Especially in the aqueous phase and solid state for hydrophobic materials, AIE helps ECL circumvent the dilemma between substantial emission intensity and biocompatible media. The wide range of analytes makes ECL an overwhelmingly interesting analytical technique. Therefore, AIECL has gained potential in clinical diagnostics, environmental assays, and biomarker detections. This review will focus on introduction of the novel concept of AIECL, current applied luminophores, and related applications developed in recent years.

The role of pramipexole functionalized MWCNTs to the fabrication of Pd nanoparticles modified GCE for electrochemical detection of dopamine

BACKGROUND

Interest in functionalized carbon nanotubes for many applications arises from a variety on the kind of modification atoms or molecules that are attached to it. Dopamine, the feel-good hormone, release by neurons and playing an important role in body systems. Abnormal dopamine levels cause nerve disorders such as Parkinson's disease and schizophrenia.

OBJECTIVES

The aim of this study was the design and fabrication of electrochemical sensor based on MWCNTs and Pd nanoparticles for detection and determination of dopamine in biological samples.

METHODS

For this purpose, we report the synthesis of pramipexole-functionalized MWCNTs (pp-MWCNTs) for efficient capture of palladium nanoparticles and fabrication of Pd/pp-MWCNTs nanocomposite. Morphological and structural characteristics of the nanocomposites were characterized using various techniques including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT-IR).

RESULTS

This newly synthesized nanocomposite may have numerous applications in nanotechnology and sensing. We show that the synthesized nanocomposite reported here will be applicable for modifications of bare glassy carbon electrode (Pd/pp-MWCNTs/GCE) to sense of dopamine electrochemically. Two linear calibrations for dopamine are obtained over ranges of 0.01 to 10 μM and 10 to 200 μM with a detection limit of 1.4 nM. The Pd/pp-MWCNTs/GCE shows high stability and sensitivity, and an acceptable decrease of over-potential for the electrooxidation of dopamine that decreases interference in the analysis. The proposed Pd/pp-MWCNTs nanocomposite can be used as a voltammetric detector for dopamine monitoring in routine real sample analysis.

CONCLUSIONS

The proposed sensor showed high sensitivity and selectivity in sensing dopamine in biological samples. Graphical abstract Preparation of Pd/pp-MWCNTs/GCE for detection of dopamine.

Aggregation-Induced Electrochemiluminescence by Metal-Binding Protein Responsive Hydrogel Scaffolds

Functionalized hydrogels have aroused general interest due to their versatile applications in biomaterial fields. This work reports a hydrogel network composed of gold nanoclusters linked with bivalent cations such as Ca²⁺ , Mg²⁺ , and Zn²⁺ . The hydrogel exhibits both aggregation-induced emission (AIE) and aggregation-induced electrochemiluminescence (AIECL) effects. Most noteworthy, the AIECL effect (≈50-fold enhancement) is even more significant than the corresponding AIE effect (approximately fivefold enhancement). Calmodulin, a Ca²⁺ binding protein, may efficiently regulate the AIECL dynamics after specific binding of the Ca²⁺ linker, with the linear range from 0.3 to 50 µg mL^-1 and a limit of detection of 0.1 µg mL^-1 . Considering the important roles of bivalent cations in the life system, these results may pave a new avenue for the design of a biomolecule-responsive AIECL-type hydrogel with multifunctional biomedical purposes.

Lanthanide terbium complex: synthesis, electrochemiluminescence (ECL) performance, and sensing application

In this study, a new lanthanide terbium complex, Tb(pzda)3(NO3)3·nH2O, was synthesized by a hydrothermal method and characterized by Fourier transform infrared spectroscopy (FT-IR) and energy-dispersive X-ray spectroscopy (EDS). It was found that the as-synthesized Tb-complex exhibited good electrochemiluminescence (ECL) behavior in the presence of triethanolamine (TEOA) in a HAc-NaAc buffer solution on a glassy carbon electrode. The possible reaction mechanism has been discussed based on the fluorescence spectra and ECL spectra. For sensing applications, it was found that protocatechuic acid (PCA) had an obvious quenching effect on the ECL signal of the Tb-complex, and this resulted in a decreased ECL signal associated with the concentration of PCA. Therefore, a highly sensitive method for the detection of PCA was established with a linear range of 1.283 × 10-10 M to 3.845 × 10-4 M and a detection limit of 0.085 nM at an S/N ratio of 3. This novel ECL assay strategy with an outstanding ECL efficiency offers great potential for pharmaceutical analyses.

Label-free and amplified electrogenerated chemiluminescence biosensing for the detection of thymine DNA glycosylase activity using DNA-functionalized gold nanoparticles triggered hybridization chain reaction

Effective detection of thymine DNA glycosylase (TDG) activity is extremely crucial and urgent for epigenetic research. Herein, a novel label-free electrogenerated chemiluminescence (ECL) biosensing method was developed for the detection of TDG activity using DNA-functionalized gold nanoparticles (DNA-AuNPs) triggered hybridization chain reaction (HCR). In this assay, the thiol modified hairpin probe DNA (hp-DNA) with 5' overhangs and one mismatched base pair of guanines: thymine (G: T) in the stem part was boned onto gold electrode. TDG specifically removed T base of the G: T mismatch to produce apyrimidinic (AP) sites through the N-glycosidic bond hydrolysis. The AP site was then cleaved by the catalysis of Endonuclease IV (EnIV) to generate dsDNA containing a free 3' end in the long sequence, which serves as a complementary sequence to hybridize with the specific sequence (ssDNA1) of DNA-AuNPs. Then, the functionalized DNA-AuNPs with initiator strands (ssDNA2) could trigger HCR to form nicked double helices DNA polymer which can embed numerous ECL indicator, Ru(phen)₃²⁺, resulting in significantly increased ECL signal. The proposed strategy combined the amplification function of DNA-AuNPs triggered HCR and the inherent high sensitivity of the ECL technique, a detection limit of 1.1 × 10^-5 U/μL (0.0028 ng/mL) for TDG determination was obtained. In addition, this method was successfully applied to evaluate TDG activity in cancer cell, which provides great possibility for TDG activity assay in related clinical diagnostics.

Unusually Strong Electrochemiluminescence from Iridium-Based Redox Polymers Immobilized As Thin Layers or Polymer Nanoparticles

A new class of redox metallopolymer based on cyclometalated iridium(III) centers is described, with unusually intense luminescence properties in aqueous media. We report the facile synthesis, photophysical and electrochemical characterization, supported by DFT calculations and their electrochemiluminescence (ECL) properties which, under some circumstances, are significantly greater than the analogous ruthenium-based materials. The photoluminescence (PL) and ECL of these materials are further dramatically enhanced when dispersed or immobilized as polymeric nanoparticles (PNPs). This aggregation-induced emission (AIE and AIECL) operates by providing important protection for the cyclometalated iridium(III) centers against the types of quenching processes which commonly afflict iridium-based luminophores in aqueous media. The results suggest interesting new avenues of research for the application of such materials in and PL and ECL-based detection and imaging as well as light-emitting devices.